Used Meiller A Trailers for sale (159)

Condition: new, maximum load weight: 28,640 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, Brakes: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Disc brakes 22.5" * Parking brake with shortened rear fenders and manual parking brake switch ----Axles: * 3 x 9-ton BPW or SAF axles (depending on availability) * Lift axle with start-up assistance ----Suspension: * Air suspension with automatic lowering during the tipping process (to increase stability, can be deactivated for asphalt pavers) Dkjdpfx Asxxf Twep Eor ----Electrical System / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pole trailer socket * 5-chamber rear lights with protective cover * 1 x additional LED work light * Flashing side marker lights ----General Components: * Aluminum air tank * Jost telescopic steel landing gear with plate foot (can only be coupled in the unloaded state) * 4 m aluminum extension ladder stored on the right side over the fender * Closed plastic individual fenders * Folding underrun protection * Towing eye at the rear * Folding access ladder on the left side at the front * Document box on the front panel ----Frame: * Chassis made of high-strength fine-grained steel with Meiller-specific torsion crossmember ----Tipping Body: * Half-shell steel rear dump body * Front panel with 600 mm front canopy as a tarpaulin support * Side walls with stable, continuous, inward-sloping top rail * Front and rear walls angled ----Thickness of Floor, Side Walls, Front and Rear Walls: * Front wall 4 mm made of BS 70 steel * Tailgate 4 mm made of 4 mm HBW 400 steel * Side walls made of 4 mm HBW 450 steel * Tailored floor made of 5 / 6 mm Hardox 450 steel ----Hydraulic Cylinders: * Front hydraulic cylinders with medium working pressure ----Hydraulic Rear Wall: * Fixed and pivoting hydraulic rear wall. Control of the hydraulic rear wall via a mechanical ball valve block ----Tarpaulin: * Electric sliding tarpaulin - RAL 9006 white aluminum - with switch on the chassis and remote control ----Load Volume: * Approx. 25 m³ ----Saddle Height: * Unloaded approx. 1,247 mm * Loaded approx. 1,217 mm ----Painting: * Painting of the chassis in RAL 7021 black gray * Tipping body in RAL 9006 white aluminum ----General Information: * --Technically possible total permissible weight of 39,000 kg-- * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week 37 / 2026

Condition: new, maximum load weight: 26,840 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space volume: 25 m³, Year of construction: 2025, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ----Axles: * 2 x 9 ton BPW axles * Lift axle with traction aid * Reinforced single-leaf torsion suspension ----Suspension: * Air suspension with automatic lowering during tipping process (to increase stability, can be deactivated for overhead pavers) ----Electrics / Lighting: * SmartBoard (lifting and lowering, lowering of lift axle, traction aid, mileage display, axle load display, ECAS, error memory readout) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective roof * 1 additional LED work light * Flashing side marker lights * Tire Pressure Monitoring System (TPMS) ----General Attachments: * Aluminium air tank * Telescopic steel landing legs with base plate (can only be removed when empty) * 4 m aluminium ladder stored on the right side above the mudguards * Closed single-piece plastic mudguards * Folding underrun protection * Tow eye at the rear * Folding boarding ladder on the front left side * Document box on the front wall ----Chassis: * High chassis frame made of high-strength fine-grained steel ----Tipping Body: * Half-shell steel rear tipper body made from STEELECT 450 steel - HBW 450 * Front wall with 600 mm front roof as tarpaulin carrier * Side walls with sturdy continuous inward-inclined top rail * Front and rear walls slanted Dsdsw Eg Eqopfx Ap Eekr ----Thickness of floor, side walls, front and rear walls: * Custom floor 5 / 6 mm * Front wall 5 mm * Rear wall 5 mm * Side walls 5 mm ----Hydraulic Ram: * Front hydraulic ram with medium working pressure ----Hydraulic Tailgate: * Superimposed hydraulic and swinging tailgate * Control of hydraulic tailgate via mechanical ball valve ----Tarpaulin: * Electric sliding tarpaulin - RAL 9006 white aluminium - with manual switch on chassis and remote control ----Saddle height: * Unladen approx. 1,350 mm * Laden approx. 1,340 mm ----Loading volume: * Approx. 25 m³ ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminium ----General Information: * Errors and prior sales excepted * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 27,520 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space volume: 25 m³, Year of construction: 2026, Brakes: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring brake cylinders * Drum brakes 420 x 180 mm * Factory-installed brake with shortened rear mudguards and manual factory-installed brake switch ----Axle: * 2 x 9 ton BPW or SAF axles (depending on availability) * Lift axle with starting aid ----Suspension: * Air suspension with automatic lowering during the tipping process (to increase stability, can be disabled for asphalt paving applications) ----Electrical System / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pole trailer socket * Eco-LED II lighting with protective roof * 1 x additional LED work light * Flashing side marker lights ----General Components: * Aluminum air tank * Telescopic steel support legs with plate foot (can only be lowered in unloaded condition) * 4 m aluminum ladder stored on the right side, above the mudguard * Closed plastic individual mudguards * Folding underride guard * Towing eye at the rear * Folding access ladder on the left front side Dodew Eg Ekjpfx Ap Eekr ----Frame: * Chassis made of high-strength fine-grained steel with Meiller-specific torsion crossmember ----Tipping Body: * Half-shell steel rear tipping body made of STEELECT 450 steel -HBW 450- * Front wall with 600 mm front roof as a tarpaulin support * Side walls with stable, continuous, inward-sloping top rail * Front and rear walls – angled * Document box on the front wall * Hinged tailgate with rubber seal and 2 additional twist locks, as well as automatic 2-hook locking system ----Thickness of floor, side walls, front and rear walls: * Tailored floor 5 / 6 mm * Front wall 4 mm * Side wall 4 mm * Rear wall 4 mm ----Hydraulic Cylinders: * Front hydraulic cylinders with medium working pressure ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminum- with manual switch on the chassis and remote control ----Load Volume: * approx. 25 m³ ----Fifth Wheel Height: * unladen approx. 1,250 mm * laden approx. 1,220 mm ----Paintwork: * Chassis painted in RAL 7021 dark gray * Tipping body painted in RAL 9006 white aluminum ----General Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery Time: * Available from week 37/2026

Condition: new, maximum load weight: 27,760 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space volume: 25 m³, Year of construction: 2026, Brakes: * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm * Paver brake with shortened rear mudguards and manual paver switch ---- Axle: * 3 x 9 t BPW axles * 1st axle liftable with traction aid ---- Suspension: * Air suspension with automatic lowering during tipping process (for increased stability, deactivatable for deck pavers) ---- Electrical / Lighting: * Smart Board (lift and lowering system, lowering the lift axle, traction aid, odometer, axle load display, ECAS, error memory reading) * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * Eco-LED II lighting with protective cover * 1 x additional LED work light * Flashing side marker lights ---- General Attachments: * Aluminum air tanks * Telescopic steel landing legs with base plate (can be uncoupled only when empty) * Closed plastic single mudguards * 4 m aluminum side access ladder, stored on the right side above mudguards * Foldable underrun protection * Rear towing eye ---- Chassis: * High chassis frame made of high-strength fine-grained steel, heavy-duty version ---- Tipping Body: * Half-shell steel rear tipping trough made entirely of STEELECT 450 steel -HBW 450- * Side walls with robust continuous inward-sloping top rail * External aluminum access steps and platform in front of front wall ---- Floor, Side Walls, Front and Rear Wall Thickness: * Front and rear walls inclined * Front wall and rear wall: 5 mm * Side walls: 6 mm * Floor: 8 mm HBW 450 steel ---- Hydraulic Ram: * Front hydraulic ram with medium working pressure ---- Hydraulic Tailgate: * Laying hydraulic as well as pendulum tailgate * Hydraulic tailgate controlled via mechanical ball valve ---- Tarpaulin: * Manual roll-up tarpaulin - RAL 9006 white aluminum Dedpfx Aow Eg Edep Ejkr ---- Loading Volume: * approx. 25 m³ ---- Saddle Height: * Unladen approx. 1,340 mm * Laden approx. 1,330 mm ---- Paintwork: * Chassis painted RAL 7021 black grey * Tipping body painted RAL 9006 white aluminum ---- General Information: * --Permissible gross vehicle weight technically up to 39,000 kg-- * Errors and prior sale excepted * New vehicle with manufacturer's warranty ---- Delivery Time: * Available from week 11/2026

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes ----Axles: * 2 x 9 t BPW Eco Plus axles ----Suspension: * Air suspension with lowering function * Reinforced single-leaf trailing arm spring ----Drawbar: * Drawbar 2,600 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle ----Electrical / Lighting: * Wabco Smartboard * 15-pin power connector * Preparation for Motec rear-view camera * LED tail lights with protective cover * 2 rear LED work lights * Electrical pre-wiring for MOTEC rear camera ----General attachments: * Aluminum air tank 60 ltr * Foldable side underrun protection * Enclosed plastic mudguards * Bolted underrun protection * Foldable rear A-sign * Plastic toolbox rear right * Steel mesh box rear left * Side underrun protection ----Roller track surface: * Roller track length approx. 7,115 mm * Lowered roller surface with manually insertable wheel chocks - two positions - at the front, each with 2 integrated pneumatic locks in the cross members ----Load securing: * Automatic container lock after uncoupling the braking system from the tractor unit * Side lashing eyes for additional load securing ----Loading height: * In driving position approx. 1,065 mm ----Loading dimensions: * Dimensions for 5,000 - 7,000 mm container lengths according to DIN 30722-1/2, DIN 14505 ----Paintwork: * Chassis with cataphoretic primer (KTL) ----Tires: * Tires 265/70 R 19.5 * Tire pressure monitoring system (TPMS) Dsdpfexxf T Dex Ap Eskr ----General information: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately ex Egsestorf

Condition: new, maximum load weight: 28,660 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, Brake system: * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * 22.5" disc brakes * Paver brake with shortened rear mudguards and manual paver switch Dedpjr Exzmsfx Ap Eskr ----Axles: * 3 x 9 ton BPW axles * 1st lift axle with starting aid ----Suspension: * Air suspension with automatic lowering during tipping operation (increases stability; can be deactivated for paver operation) ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 1 x 15-pin trailer socket * 5-chamber tail lights with protective cover * 1 x additional LED work lamp * Flashing side marker lights ----General Fittings: * Aluminum air tank * Jost telescopic steel landing legs with base plates (can only be dropped with empty trailer) * 4 m aluminum side ladder stowed on the right above the mudguards * Closed plastic single mudguards * Folding underrun protection * Rear towing eye * Folding access ladder at the front left side * Document box on front wall ----Frame: * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members ----Tipping Body: * Half-shell steel rear tipper body (front hydraulic cylinder with medium working pressure) * Front wall with 600 mm front canopy as tarpaulin carrier * Side walls with sturdy continuous upper rail inclined inward * Front and rear walls slanted * Overlapping tailgate with rubber seal and 2 additional toggle locks, as well as automatic 2-hook lock ----Thickness of floor, side walls, front and rear wall: * Front wall: 4 mm BS 70 steel * Tailgate: 4 mm HBW 400 steel * Side walls: 4 mm HBW 450 steel * Tailored floor: 5 / 6 mm Hardox 450 steel ----Tarpaulin: * Electric sliding tarpaulin -RAL 9006 white aluminum- with chassis-mounted switch and radio remote control ----Load volume: * Approx. 25 m³ ----Fifth wheel height: * Unladen approx. 1,247 mm * Laden approx. 1,217 mm ----Paintwork: * Chassis painted in RAL 7021 black grey * Tipping body in RAL 9006 white aluminum ----General information: * --Technical gross vehicle weight possible: 39,000 kg-- * Subject to prior sale and errors * New vehicle with manufacturer’s warranty ----Delivery time: * Available immediately from Egestorf on the A7

Condition: used, maximum load weight: 28,620 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2018, next inspection (TÜV): 02/2027, loading space length: 7,500 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, loading space volume: 24 m³, Equipment: ABS, * ABS * Lift axle * BPW axles * 5-chamber tail lights * Foldable underrun protection at the rear ----Body: Halfpipe rear tipper body, capacity approx. 24 m³, front platform, tailgate, roll tarp.----Wabco Smart Board Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see imprint). Dkjdpfoycm Tnjx Ap Eer

Condition: used, mileage: 1,001 km, first registration: 01/2016, overall weight: 11,500 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 4,600 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2016, Vehicle location: Bovenden, steel body, lashing eyes, swing tailgates Djdjyxhbmepfx Ap Ejkr Body: Meiller 3-way tipper body approx. 7m³, dismantled from DAIMLER-BENZ Arocs 1840 K 4x2 with 3900mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, color: white, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Dksdpsi Rk Dnefx Ap Eer Body: Tipper platform, 3.8m-6m, for 2, 3 and 4-axle vehicles, NEW!!! Matching sideboards in steel or aluminum are in stock. 120 available! Prices vary depending on size, between EUR 2,500.00 and EUR 4,900.00 for 3 and 4-axle tippers. Some models are equipped with Bordmatic devices. ACCESSORY INFORMATION IS NOT GUARANTEED; subject to change, prior sale and errors!

Condition: new, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Available: 65 units! Suitable for 2, 3, or 4-axle vehicles. Prices range from €2,600.00 to €4,900.00 (net)! Tilting cylinders available at an additional cost! Dkjdpfx Apsi Rk Eze Esr ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors.

Condition: used, mileage: 1,001 km, first registration: 01/2011, overall weight: 15,600 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 9 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 800 mm, Year of construction: 2011, Vehicle location: Bovenden, steel structure, left side boardmatic, lashing eyes Structure: Meiller 3-way tipper body type D316 BM with left boardmatic Removal from Iveco Trakker AD260T45W 6x6 with 3500mm wheelbase! Dodpewphy Refx Ap Ejkr Hydraulic connections for tipping trailer at the rear! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, interim sale, and errors reserved!

Condition: used, mileage: 1,001 km, color: blue, driver cabin: other, gearing type: other, loading space volume: 10 m³, loading space length: 4,200 mm, loading space width: 2,360 mm, loading space height: 1,000 mm, Vehicle location: Bovenden, steel body, flap, Jet sidewalls. Body: Meiller tipper box approx. 10 cbm. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, interim sale and errors excepted! Dkjdpfxjvhg D Te Ap Esr

Condition: new, first registration: 01/2019, overall weight: 21,500 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2019, Vehicle location: Bovenden, steel superstructure, chute, pendulum flaps Body: Meiller 3-sided tipper body with chute approx. 14m³ Year of construction 2019! Dismantling of Daimler-Benz Arocs 4145 K 8x4/4 with a wheelbase of 4550mm and leaf suspension! ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! Dodpfx Asvhibbop Ejkr - .

Condition: new, color: white, driver cabin: other, gearing type: other, loading space volume: 18 m³, loading space length: 5,700 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, Year of construction: 2011, Vehicle location: Bovenden, Body: For MAN and D-Benz 4-axle chassis from 4200mm wheelbase approx. 18.3 cbm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dedpfxjvhknie Ap Ejkr - .

Condition: new, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Superstructure: Auxiliary frame, type 20N3/T574, with supports, available 4x. Auxiliary frame, type 20N3/T574, Meiller no. 1102 1002 574, for Actros 26/K, wheelbase 3300mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Dedpfx Aei Rp Tgsp Eekr

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: black, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, Dedpfxsryw Tbj Ap Ejkr Body: 19t Meiller RK 19.65 S roll-off system for containers up to 6.5m Dismantling of SCANIA 144L 460 6x2 with 4500mm wheelbase! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, color: brown, driver cabin: other, gearing type: other, loading space volume: 8 m³, loading space length: 4,400 mm, loading space width: 2,300 mm, loading space height: 800 mm, Vehicle location: Bovenden, steel body, flap, jet drop sides Body: Meiller body NEW approx. 8 cbm, roof protection ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dodpevhg Edsfx Ap Eekr - .

Condition: used, mileage: 1,001 km, first registration: 01/2007, overall weight: 15,600 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 6,200 mm, loading space width: 2,320 mm, loading space height: 1,000 mm, Year of construction: 2007, Vehicle location: Bovenden, Construction: Meiller 3-way tipping body with on-board control on the left Dismantling of Iveco-Magirus Trakker AD410T45W 8x8 with 4750mm wheelbase! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! - . Dksdpfx Ajvvbptjp Eer

Condition: new, color: yellow, loading space width: 2,300 mm, loading space length: 5,200 mm, loading space height: 800 mm, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, tailgate. Dksdpsi Rqdmofx Ap Esr Body: steel tipper body, approx. 9.4 m³, Gassmann roll-off frame with a virtually new Meiller tipper body from stock! Visitors to the trade fair were allowed to spray graffiti on the tipper body at the Meiller stand! The tipper body has a 6 mm thick floor and an automatic tailgate! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, color: white, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Type: Tipper platform 3.8m-6m for 2, 3 and 4-axle vehicles, NEW!!! Matching sideboards in steel or aluminum are in stock. 120 AVAILABLE! Prices range from 1,900 to 4,500 euros for 3 and 4-axle tipper bodies. Some models include Bordmatic devices. ACCESSORY INFORMATION IS NOT GUARANTEED; subject to changes, prior sale, and errors! Djdpfx Apji Rk Drs Eekr

Condition: used, mileage: 1,001 km, first registration: 01/2007, overall weight: 13,000 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2007, Vehicle location: Bovenden, container locking system, rear support Dsdpjwy Dt Iefx Ap Ejkr Body: Meiller AK - telescopic skip loader on roll-off frame. Year of manufacture and type cannot be determined! Total length approx. 6000 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 1,001 km, first registration: 01/1995, color: orange, driver cabin: other, gearing type: other, loading space volume: 36 m³, loading space length: 6,900 mm, loading space width: 2,300 mm, loading space height: 2,300 mm, Year of construction: 1995, Vehicle location: Bovenden, steel superstructure Body: steel body approx. 36m³ 2 split tailgate (hydr.), dismantling of vehicle 61498, MB 2631 AK wheelbase 4.5m ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Djdpfx Apovhg Ape Eekr - .

Condition: used, mileage: 1,001 km, first registration: 01/2007, overall weight: 4,500 kg, color: red, driver cabin: other, gearing type: other, loading space length: 3,600 mm, loading space width: 2,320 mm, loading space height: 400 mm, Year of construction: 2007, Vehicle location: Bovenden, steel body, lashing eyes, pendulum flaps Body: Meiller 3-sided tipper body The body comes from a Mitsubishi Fuso from 2009 with water damage! Further spare parts from the vehicle can be purchased by arrangement & for an additional charge! ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! Dkjdpfjvhmyusx Ap Esr - .

Condition: used, empty load weight: 6,300 kg, maximum load weight: 32,200 kg, overall weight: 38,500 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 7,400 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, loading space volume: 26 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3-axle, BPW axles, air-suspended, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, catwalk, flap, U-protection, chute, supports Body: Steel body approx. 26m³ with platform and roller tarpaulin 3x 9t BPW axles, drum brake! Internal tailgate! Suitable for all-wheel tractors! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Djdpfxsv Rrfho Ap Eskr - .

Condition: used, mileage: 1,001 km, first registration: 01/1999, driver cabin: other, gearing type: other, loading space length: 5,116 mm, loading space width: 2,300 mm, loading space height: 800 mm, Year of construction: 1999, Vehicle location: Bovenden, steel body, tailgate. Dkedpji N Hhdjfx Ap Ejr Body: Nominal load 15,600 kg, approx. 9.4 cubic meters, 6 mm floor thickness with automatic tailgate! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!