Used Krone Trailers for sale (1,376)

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2009, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,725 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, VIN: WKESD00000440159 Body type: AB 13620 STG Fifth wheel height unladen: 1,150 mm 4 pairs of ship securing lugs according to PREN 29367-2 Ncodpfxjw Nm U Eo Acyel 3 Gigant axles, each with a load capacity of 9,000 kg Wheelbase: 1,310 mm / 1,310 mm Disc brakes Lifting and lowering device 6 units of 455/45R22.5 tyres 1 PVC toolbox 4 rear rubber bumpers 30 mm thick, waterproof-bonded panel floor, fully sealed, floor loading capacity up to 7,000 kg forklift axle load Internal height: 2,725 mm Rear portal loading height: 2,650 mm Closed body Side walls made from galvanized steel sheet cassettes Side walls inside with keyhole plates Front wall smooth, interior lined fully with wood 3 ceiling lights with switch 2 ventilation grilles per side wall Internal forklift impact protection, approx. 350 mm high along the sides Rear wall configured as steel container door with replaceable seal Double locking rod system on container door Customs plates and insurance available at extra cost. For export transactions, we can carry out the export declaration and registration for you against reimbursement of costs. When exporting to non-EU countries, a deposit of 19% of the purchase price will be retained. This will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding via mobile/WhatsApp. Always make an appointment for inspection/test drive! Just stop by and see us. We look forward to your visit. The information provided online is non-binding and presented as a description only. It does not guarantee specific features. The seller assumes no liability for typographical or data transmission errors, changes, input errors, or mistakes. Subject to prior sale.

Condition: excellent (used), axle configuration: 3 axles, first registration: 10/2016, loading space length: 13,640 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65-R252.5, wheelbase: 8,790 mm, Year of construction: 2016, Equipment: ABS, = Additional Options and Equipment = - Side boards - BPW axles - EBS (Electronic Braking System) - Rear doors Ncsdjybblijpfx Acyel - Lift axle - Air suspension - Sliding roof - Drum brakes = Remarks = Very nice 10/2016 KRONE curtain-sided trailer with ABS/EBS, 80 cm high side boards, BPW axles with drum brakes, 1st axle = lift axle, MultiLock + lashing rings, sliding roof, rear doors. Unladen weight 6,900 kg, permissible total weight: 41,000 kg, tire size 385/65-R22.5 (tread depth left: 9/11/6 mm; tread depth right: 4/11/7 mm), Dutch registration. = Further Information = Axle configuration Tire specification: 385/65-R22.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; max. axle load: 9,000 kg; left tread: 55%; right tread: 25% Rear axle 2: max. axle load: 9,000 kg; left tread: 70%; right tread: 70% Rear axle 3: max. axle load: 9,000 kg; left tread: 40%; right tread: 45% Weights Unladen weight: 6,900 kg Payload: 34,100 kg Gross vehicle weight: 41,000 kg Functional Body manufacturer: KRONE SD Condition Technical condition: very good Visual condition: very good Identification License plate: OP-37-LJ Further Information Please contact Arne Honingh for more information.

Condition: new, empty load weight: 2,680 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2026, suspension: air, tire size: 9-fach 235/75 R 17,5, wheelbase: 5,170 mm, color: black, Equipment: ABS, 2-axle swap body trailer, new vehicle. Version: UPS version. AZW 18\nABS/EBS drum brake, axles (BPW, manufacturer's choice) \nDimensions: L=8,945 to 9,345 mm, W= 2,480 mm. Unladen weight: 2,780 kg.\nTop lift: 1,140 mm, bottom lift: 880 mm, ride height: 980 mm.\n\nWheels with internal sensors and tire pressure monitoring system in accordance with UN ECE R 141 (TPMS)\n\nTires: 9-ply 235/75 R17.5 (FULDA, manufacturer's choice) with galvanized spare wheel basket. \n \nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'. It cannot be loaded flush with the rear due to the arrangement of the underride guard in accordance with the EC standard.\n\nTensioning fork 150 mm offset.\nTensioning fork extendable from 2,000 to 2,400 mm (8 x 50 mm).\nFactory set to 2,200 mm. ø 40 mm towing eye.\n\nWarning sign ECE-R70 (red/yellow), splash guard in accordance with the EC directive,\nRump guard with rubber buffers. 1 parking warning sign, hinged.\n\nLighting and illuminated signaling device according to UN ECE . 48\nIncl. 2 LED license plate lights, LED side marker lights, \nLED clearance lights in the rubber arm.\n \nElectrics: 15- or 2x7-pole according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n \nDelivery date on request. Leasing possible.\n \nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties under \n. Nodpetrgytsfx Acyecl

Condition: new, empty load weight: 2,985 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2026, suspension: air, tire size: 4-fach 385/65 R 22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Central axle swap body trailer, new vehicle. Version: Standard, without lift axle. ZZW 18.\nAxles (BPW, manufacturer's choice), ABS/EBS disc brake. \n\nCoupling height: 750 mm, high-coupled.\nTop lift: 1,320 mm, bottom lift: 1,220 mm, ride height: 1,255 mm. \nFor parking heights from 1,220 - 1,320 mm.\n\nTires: 4-wheel 385/65 R22.5 (manufacturer's choice) without spare wheel basket. \nSpare wheel available at an extra charge. \n\nWheels with internal sensors and tire pressure monitoring system according to UN ECE R 141 (TPMS)\n\nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'.\n\nFront outriggers with crank and gearbox. \n\nRear support with 2 galvanized support legs, foldable and height-adjustable.\n\nTowbar with bolted ø 50 mm towing eye. Towbar length (dimension from center of towing eye to front edge of bulkhead): 1,650 mm.\n\nAdditional button for activating the 'brake release function' for tension-free lifting of the vehicle body.\n\nLighting and light signal device in accordance with ECE . 48\nLED side marker lights with direction indicator (flashing function),\n2 LED clearance lights in the rubber arm,\nLED multifunction rear lights,\n2 LED license plate lights,\n1 reversing lights and \n1 additional LED reversing lights. \n\nWheel cover and splash guard in accordance with EC Directive\n\nElectrics: 15- or 2x7-pole according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n\nDelivery date on request. Leasing possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Ncedpfx Acjubztqsyol

Condition: new, empty load weight: 2,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2026, suspension: air, tire size: 4-fach 445/45 R 19,5, wheelbase: 5,170 mm, color: black, Equipment: ABS, 2-axle swap body trailer, new vehicle. Version: Maxi. AZW 18\nABS/EBS disc brake, axles (BPW, manufacturer's choice) \nDimensions: L=8925 to 9,525 mm, W= 2,480 mm. Unladen weight: 2,840 kg.\nTop lift: 1,400 mm, bottom lift: 900 mm, ride height: 1,080 mm.\n\nTires: 4-ply 445/45 R19.5 with galvanized spare wheel basket. \nSpare wheel available at an extra charge. \n\nWheels with internal sensors and tire pressure monitoring system according to UN ECE R 141 (TPMS)\n \nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'. It cannot be loaded flush with the rear due to the arrangement of the underride guard in accordance with the EC standard.\n\nExtendable drawbar from 1,800 to 2,400 mm (12 x 50 mm).\nFactory set to 2,200 mm. ø 40 mm towing eye.\n\nWarning sign ECE-R70 (red/yellow), splash guard in accordance with the EC directive,\nRump guard with rubber buffers.\n\nLighting and light signaling device in accordance with UN ECE . 48\nIncl. 2 LED license plate lights, LED side marker lights, \nLED clearance lights in the rubber arm.\n \nElectrics: 15- or 2x7-pole according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n \nDelivery date on request. Leasing possible.\n \nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nYou can find more properties under \n. Ncodpfx Asubzt Decyjl

Condition: new, empty load weight: 2,555 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2026, suspension: air, tire size: 4-fach 385/65 R22.5, wheelbase: 5,170 mm, color: black, Equipment: ABS, AZW 18, ABS/EBS disc brake, axles (BPW, manufacturer's choice) \nTop stroke: 1,350 mm, bottom stroke: 1,190 mm, ride height: 1,255 mm.\n\nTires: 4-wheel 385/65 R22.5 with spare wheel basket. Spare wheel available at extra cost. \n\nWheels with internal sensors and tire pressure monitoring system according to UN ECE R 141 (TPMS)\n\nLighting and light signaling device according to UN ECE RG.N. 48\n\nWarning sign ECE-R70 (red/yellow), splash guard according to EC directive, impact protection with rubber buffers,\nRigid drawbar, not telescopic.\n\nElectric: 15- or 2x7-pole according to customer request incl.\nAir: Duomatic or yellow/red according to customer request incl.\nAccessories available at extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n\nDelivery date on request. Leasing possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Nedsuf D R Hspfx Acyecl

Condition: used, Year of construction: 2010, color: white, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 49.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,755 mm, Swap body, sliding curtain BDF system, 7,450 mm long, NEW PAINT + CURTAIN! Used and reconditioned swap body with Edscha sliding roof and sliding curtains, BDF system 7,450 mm long. Rear portal doors with internal locking rods. Interior: anti-slip plywood floor and double-sided 25 mm pallet stop strip. Our services: * New paintwork in RAL 9010 white or any other RAL color upon customer request * New side curtains in RAL 9010 white or other colors upon customer request * Undercarriage protected with underbody sealant * Factory-new telescopic or newly painted support legs in RAL 9005 black * New galvanized sliding ladder * UVV inspection certificate Nodpfx Acexq E Ryjyjcl All stated values are approximate measurements in mm and kg. Delivery date upon request. Delivery available. Offer subject to change; prior sale reserved. Prices net ex location D-59558 Lippstadt-Rixbeck. You can find further items at pstä. .

Condition: new, Year of construction: 2026, color: white, overall weight: 16,000 kg, empty load weight: 2,430 kg, loading space volume: 47.5 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,630 mm, Swap-body platform, sliding tarpaulin BDF system 7,450 mm long, FACTORY NEW Brand new swap-body platform with Edscha sliding tarpaulin, BDF system, 7,450 mm long.\nHigh portal doors at the rear with internal espagnolette locks.\nSPECIAL HEIGHT: 2,900 mm!\n\nBody in RAL 9010 pure white, sliding tarpaulins in RAL 9010 pure white.\nSupport legs in RAL 9005 jet black. \nPitching height: 980 to 1,320 mm.\nLoading height rear portal: 2,525 mm\n\nEquipment:\n27 mm thick, waterproof screen printing plate floor. \nForklift accessible, axle load up to max. 5,460 kg.\nMultilock outer frame\n4 sets of LM insertable slats\nSliding roof (can only be moved from rear to front) \nIncl. load securing certificate body / tarpaulin EN 12641-2 Code XL.\n\nDelivery date on request. Delivery possible.\n\nAll stated values are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nMore objects can be found at . . Ncedpfx Aetib Niecyjl

Condition: new, Year of construction: 2026, color: white, empty load weight: 16,000 kg, loading space volume: 56.3 m³, loading space width: 2,470 mm, loading space length: 7,670 mm, loading space height: 2,970 mm, Swap body, smooth steel BDF system, 7,820 mm long, FACTORY NEW! Brand-new smooth-walled steel swap body, BDF system 7,820 mm long, corner height: 3,125 mm.\n\nRear portal doors with double interior espagnolette locks.\n\nBody in RAL 9010 pure white. Telescopic ZINC-plated support legs for storage height 920 - 1,120 mm.\n\nInterior fittings as follows:\nRoof made of trapezoidal profiled sheet steel.\n21 mm thick, waterproof glued screen printing plate floor, strength according to EN 283\nfor floor loads up to 5,460 kg forklift axle load.\n\nForklift collision protection on 3 sides, approx. 360 mm high.\nSide walls above scuff rails with recesses for bulk material drainage\nSide walls inside with wooden paneling and \nSide walls inside with keyhole plates over the entire surface \n\nIncluding load securing certificate according to EN 12642 Code XL\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther objects can be found at . . Njdpfx Acotybtwjyscl

Condition: new, Year of construction: 2026, color: white, overall weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 57.5 m³, loading space width: 2,480 mm, loading space length: 7,710 mm, loading space height: 3,005 mm, Swap body, sliding curtain, BDF system, 7,820 mm long, BRAND NEW Brand new swap body with sliding curtain, BDF system, 7,820 mm length. Automotive version. Tall rear portal doors with internal locking rods. External dimensions: L=7,850 mm, W=2,550 mm, H=3,200 mm. Parking height: 980 mm. Gross weight: 16,000 kg, unladen weight: 2,780 kg. Superstructure and side curtains in RAL 9010 pure white. Support legs in RAL 9005 jet black and telescopic. (Note: Different from the galvanized support legs shown in the pictures!) Features: Internal height: 3,200 mm. Sliding roof. (Attention: can only be moved from rear to front.) Lifting roof (hydraulic/mechanical roof can be raised by approx. 400 mm.) 27 mm thick, waterproof anti-slip plywood flooring, Forklift accessible with a maximum axle load of 5,460 kg. Pallet stop edge left and right, with elongated holes for flexible lashing. 1 pair of movable central stanchions, 4 rows of wooden insert slats. Rear sliding step ladder. Including EN 12642 Code XL certificate. All stated values are approximate dimensions in mm and kg. Delivery date upon request. Delivery possible. Ncodpfepgtgajx Acyel Offer subject to prior sale and changes. Prices net ex works D-59558 Lippstadt-Rixbeck. Find additional units under pstä.

Condition: new, empty load weight: 2,974 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2026, suspension: air, tire size: 4-fach 385/65 R 22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Central axle swap body trailer, new vehicle. Version: Standard, with lift axle. ZZW 18.\nAxles (BPW, manufacturer's choice), ABS/EBS disc brake. \nDimensions: L= 8,963 mm, W= 2,480 mm, unladen weight: 2,985 kg. \nCoupling height: 800 mm, high-coupled.\nTop lift: 1,320 mm, bottom lift: 1,220 mm, ride height: 1,255 mm. \nFor parking heights of 1,220 - 1,320 mm.\nWithout toolbox against image\n\nWheels with internal sensors and tire pressure monitoring system in accordance with UN ECE R 141 (TPMS)\n\nTires: 4-ply 385/65 R22.5 (manufacturer's choice) without spare wheel basket. \nSpare wheel available at an extra charge. \n\nSuitable for the transport of standardized swap bodies according to EN 284, size C715 and C745.\nSuitable for the transport of standardized containers according to ISO 668/1496, size 20'. Loaded to 12 tons with 40 mm drawbar eye. \n\nWith lift axle. Attention: Lift axle only lifts with unloaded vehicle with max. 3 to body\nPlease note that the function of the lift axle is no longer given in connection with unloading and the attachment of a 40 mm towing eye. The vehicle must then be completely unloaded, as the dead weight of an empty swap body/platform is already sufficient for the lift axle to no longer function.\n\nSupport at the front with crank and gearbox. \n\nRear support with 2 galvanized support legs, foldable and height-adjustable.\n\nTowing bar with bolted ø 50 mm towing eye. Towbar length (dimension from center of towing eye to front edge of bulkhead): 1,650 mm.\n\nAdditional button for activating the 'brake release function' for tension-free lifting of the vehicle body.\n\nLighting and light signal device in accordance with ECE . 48\nLED side marker lights with direction indicator (flashing function),\n2 LED clearance lights in the rubber arm,\nLED multifunction rear lights,\n2 LED license plate lights,\n1 reversing light and \n1 additional LED reversing light. \n\nWheel cover and splash guard in accordance with EC Directive\n\nElectrics: 15- or 2x7-pin according to customer requirements incl.\nAir: Duomatic or yellow/red according to customer requirements incl.\nAccessories available at an extra charge.\n\nAll values stated are approximate dimensions in mm and kg. \n\nDelivery date on request. Leasing possible.\n\nThe offer is subject to change, subject to prior sale.\nPrices net ex location D-59558 Lippstadt-Rixbeck. \nFurther properties can be found at . Njdpfxsr Il Ddo Acyjcl

Condition: new, Year of construction: 2026, color: white, overall weight: 2,710 kg, empty load weight: 16,000 kg, loading space volume: 45.6 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,525 mm, Swap body, insulated BDF system 7,450 mm, portal doors, BRAND NEW Brand new insulated swap body, BDF system 7,450 mm long, high portal doors with double internal espagnolette locks at the rear. Body in RAL 9010 pure white. Telescopic support legs in RAL 9005 black, for storage heights of 920 - 1,320 mm. Side walls, front wall, and roof in sandwich construction with steel covering layer, painted on the outside, PVC-coated on the inside. Panel thickness: front wall: 50 mm / roof: 30 mm / side walls: 30 mm. Interior fittings as follows: - 27 mm thick, waterproof glued plywood floor, strength according to EN 283. For floor loads up to 5,460 kg forklift axle load. - Forklift collision protection on 3 sides, approx. 300 mm high. - 9 pairs of lashing rings in the outer frame. - 2 rows of slotted-hole lashing rails, horizontally recessed with 2 locking bars. - NO double-deck system (contrary to the photos). - 3x crown LED ceiling lights\n\nIncludes load securing certificate according to EN 12642 Code XL\n\nDelivery date upon request. \nDelivery possible. Leasing possible.\n\nAll values given are approximate dimensions in mm and kg.\nThis offer is subject to change without notice and prior sale.\nPrices are net ex location, D-59558 Lippstadt-Rixbeck. \nYou can find further items at . . Ncodott D Rwepfx Acyjl

Condition: new, Year of construction: 2026, color: white, overall weight: 2,710 kg, empty load weight: 16,000 kg, loading space volume: 45.6 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,525 mm, Swap body, insulated, BDF system, 7,450 mm, CATERING EQUIPMENT, FACTORY NEW Factory-new insulated swap body, BDF system, 7,450 mm long, high portal doors with double internal rotary bar locks at the rear. CATERING EQUIPMENT: Dimensions and features can be individually configured for a customized price! Specification shown in the photo: Nedpfx Acoxp Rxtjyscl - 2 sales openings with electric shutters on the left side (each W: 2.5 m x H: 1.3 m) - 1 single-leaf entrance door on the right side (W: 1.2 m x H: 2.0 m) - Insulated double floor Body painted in RAL 9010 pure white. Telescopic support legs in RAL 9005 black, suitable for parking heights from 920 to 1,320 mm. Side walls, front wall, and roof in sandwich construction with steel top layer, painted outside, PVC-coated inside, panel thickness front wall: 50 mm / roof: 30 mm / side walls: 30 mm - Internal forklift impact protection on 3 sides, approx. 300 mm high. Including load securing certificate according to EN 12642 Code XL Delivery date on request. Delivery possible. Leasing option available. All stated values are approximate measurements in mm and kg. Offer is non-binding, subject to prior sale. Prices net ex location D-59558 Lippstadt-Rixbeck. You can find more items at . .

Condition: new, Year of construction: 2026, color: white, overall weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 45.7 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, Swap body, Plywood BDF system, 7,450 mm long, insulated roof Factory-new plywood swap body, BDF system, 7,450 mm long. Rear portal doors with internal locking rods. Body color: RAL 9010 white Telescopic support legs in RAL 9005 black. Parking height: 920–1,320 mm *Roof in insulated design with sandwich panels, thickness: 30 mm Interior features: 9 pairs of lashing rings mounted laterally in the slotted rail Ncodpoycw Uiofx Acyol Three-sided forklift impact protection, approx. 360 mm high 2 rows of combination lashing rails horizontally on side walls. Installation heights: Center of 1st lashing rail above floor, 800 mm; center of 2nd lashing rail above floor, 1,600 mm. LED light strip at the top of the cargo space, left front Incl. load securing certificate according to EN 12642 Code XL. 27 mm thick, waterproof screen-printed phenolic plywood floor, strength according to EN 283, suitable for floor loads up to max. 5,460 kg axle load from forklift trucks. Rear sliding step ladder. All stated values are approximate in mm and kg. Delivery date on request. Leasing available. Delivery available. Offer subject to prior sale and change without notice. Prices net ex works from D-59558 Lippstadt-Rixbeck. View further items at . .

Condition: new, Year of construction: 2026, color: blue, overall weight: 16,000 kg, empty load weight: 2,710 kg, loading space volume: 43.3 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,400 mm, Swap body, insulated BDF system, 7,450 mm long. Brand new insulated swap body, BDF system 7,450 mm long.\n\nExternal dimensions: L= 7,450 mm, W= 2,550 mm, H=2,750 mm. Storage height: 1,320 mm.\nTotal weight: 16,000 kg,\n\nConstruction in RAL 5002 ultramarine blue - or RAL color on request. \nSupport legs galvanized, parking height 1,320 mm.\n\nInterior fittings as follows:\n* Floor: aluminum floor pan, additionally reinforced in the rear area, floor load capacity in accordance with EN283 up to max. 5,500 kg forklift load, thickness: 125 mm\n* Front wall: sandwich panel with reinforcement, thickness: 50 mm, \n* Roof: sandwich panel with steel covering layer, thickness: 85 mm, including 4 LED ceiling lights\n* Side walls: full panels in sandwich construction with steel covering layer, PVC-coated on the inside, painted on the outside. Panel thickness: 60 mm, floor pan connected to the side and front with abrasion-resistant aluminum angle skirting board, approx. 300 mm high.\n* Rear wall: double-leaf rear doors, 3 aluminum hinges per wing (external), aluminum skirting boards on the inside of the rear wall doors\n\nIncluding load securing certificate in accordance with EN 12642 Code XL\n\nDelivery date on request. Delivery possible. Leasing possible.\n\nAll values given are approximate dimensions in mm and kg.\nThe offer is subject to change and subject to prior sale.\nPrices net from location D-59558 Lippstadt-Rixbeck. \nYou can find more objects at . . Ncsdpfx Acjvxvv Hoyel

Condition: new, Year of construction: 2026, color: grey, overall weight: 16,000 kg, empty load weight: 2,780 kg, loading space volume: 45.7 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,525 mm, Swap body, plywood BDF system, 7,450 mm long, portal doors, RAL 7037 dust grey, brand new plywood swap body, BDF system, 7,450 mm long. Rear portal doors with internal rotating bar locks. Support legs in RAL 9005 black, telescopic, * support height: 920 - 1,320 mm 9 pairs of lashing rings in the rubbing strip on the side Including load securing certificate according to EN 12642 Code XL. 27 mm thick, waterproof screen-printed board floor, strength according to EN 283, for floor loads up to max. 5,460 kg forklift axle load. Rear slide-out ladder. All stated values are approximate in mm and kg. Ncsdownghkspfx Acyol Delivery date on request. Leasing possible. Delivery possible. The offer is non-binding, subject to prior sale. Prices net ex location D-59558 Lippstadt-Rixbeck. More items can be found at....

Condition: used, maximum load weight: 32,190 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2022, loading space length: 15,000 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 3,995 mm, Year of construction: 2022, Equipment: ABS, Krone Mega Long Truck SDP 27 eLGV20-CS, SAF axles, 500 mm hydraulic lifting roof, Wabco2 Smart Board, Multilock outer frame, pallet stop left and right, 4-way supports Type: SDP 27 eLGV20-CS Support equipment Two mechanical landing gears, 2 x 12 t, Ncsdpfx Acsxzuqqsysl rear: 2 mechanical landing gears with folding base plate Operation of the landing gears on one side, located on the right SAF axles, electronically controlled air suspension Hydraulic lifting roof with a total stroke of 500 mm, can be lifted separately at 4 corner stanchions Multilock outer frame, universal load securing options every 100 mm Stanchions: 4 pairs of KRONE center stanchions, opposite, slat pockets on the stanchions: 1 set at floor level for 4 sets of slats, 5 sets of slat pockets on the curtain bow Front wall: continuous steel front wall, reinforced with strong corner stanchions and robust screen-printed board Tire size 6-fold, 445/45 R 19.5 SAF axles, 19.5", with air suspension (total travel 260 mm), disc brakes, Intradisc disc brake with 370 mm diameter, electronic air suspension control (WABCO: ECAS / eTASC), includes manual lift and lowering device for dock adjustment Air suspension system control via SmartBoard, increased air supply volume for air suspension system Last axle as lift axle for long truck operation Spare wheel holder Brake system manufacturer: Wabco Premium WABCO SmartBoard II displays the following information: - Trailer operational data - EBS error messages - Mileage information - Axle loads EBS system, 4S/3M, 4 sensors on two axles Pallet stop welded on side rail, left, approx. 20 mm high Pallet stop welded on side rail, right, approx. 20 mm high Floor type: BO 15000 Floor plate bonded with permanently elastic high-performance adhesive. Strength as per EN 283, suitable for floor loads up to max. 7,000 kg forklift axle load. Premium surface sealing Volume sliding roof with plastic joints, Manufacturer: Edscha Roof frame type: AB 15000 AP Steel parts shot-blasted, KTL primed and powder-coated X 001.050 Krone warranty: 10 years against rust-through Certificate of conformity for the individual vehicle (semi-trailer) according to § 7 of the LKW ÜberIStVAusnV ADR roof tarpaulin certificate Load securing according to EN 12642 Code XL Load securing certificate for beverage transport (VDI 2700 Sheet 12)

Condition: used, Year of construction: 2008, KWT 8.82 010 used Krone KWT 8.82 Ncedpsycmy Isfx Acysl

Condition: used, empty load weight: 2,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2020, suspension: air, tire size: 435/50 R 19.5, color: black, gearing type: mechanical, Equipment: ABS, Disc brake, BDF swap system, BPW axles, EBS, 1 additional pair of guide rollers centrally located, front stop for WP 7.3 – reversible for WP 7, for drop-off height 1,070 – 1,320 mm. Drawbar extendable from 1,800 – 2,400 mm (12 x 50 mm), with 50 mm towing eye. Spare wheel holder. Duo-Matic air connector. Ncjdoycdi Tjpfx Acysl

Condition: used, maximum load weight: 12,620 kg, overall weight: 16,000 kg, first registration: 01/2021, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,720 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2021, Wagon no. G0119114_1 - Manufacturer: Krone. * Double-deck specification * Standard corner fittings * Contour marking side/rear * Load certificate Code-XL * Portal doors with double external locking bars Ncsdpjx Rxgqefx Acyjl * Internal keyhole system * Forklift accessible * Telescopic support legs * Equipment for rail transport * Lashing pockets * Multiple lashing options Double-deck equipment without double-deck loading beams (available at an extra charge!). Financing upon request. Financing possible. Delivery time: IMMEDIATE AVAILABILITY. Portal doors with double external locking bars. Technically ready-to-use condition, no further repairs needed. Undercarriage (KTL) coating shows signs of use. UVV valid. UVV documentation available. LASI CODE XL!!!. Several units available!. Dimensions are approximate. Offer subject to prior sale, prices are net ex-works D-59302 Oelde. For further details, please contact us by phone or email:

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2023, loading space length: 9,395 mm, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, KRONE 2-axle swap body, type: MAXI AZW 18 eL3B7, built in February 2023 > Offer subject to change and prior sale > Gross vehicle weight 18,000 kg Njdpex Rxgwofx Acyecl > Technically ready for use with normal signs of wear, as shown in the pictures > Body / chassis: RAL color: 9005 / black > For BDF-7.45 bodies with a parking height of 1,020 to 1,320 mm > Unladen ride height: 1,080 mm > Tires: 4-ply: 445/45 R19.5? Good condition > Axles: BPW > Brake system: EBS 4S/3M > Drawbar: length-adjustable (12 x 50 mm) from 1,800 to 2,400 mm with towing eye / 40 mm > MOT + SP current / NEW > Air connections: RED / YELLOW > Electrical connections: ABS and 1 x 15-pin > Additional galvanized bumper at the rear > Available immediately and multiple units available > Price ex location, D-59269 Beckum: €14,650.00 net

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2022, loading space length: 7,650 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,975 mm, Year of construction: 2022, Vehicle No. G0115750_2 - Manufacturer: Krone. * Double-deck equipment * Simple corner fittings * Contour markings side/rear * Load certificate Code-XL * Roller shutter (aluminum) * Keyhole system inside * Accessible by forklift * Front wall niche * Fixed support legs * Device for rail loading Ncjdpfxex Rxg Ro Acyjl * Lashing recesses * Lashing options Double deck equipment without double deck loading beams (available at extra cost!). Financing on request. Financing possible. Delivery time: IMMEDIATE. Newly painted. Technically ready-to-use condition, body and support legs newly painted. Underbody (KTL) cleaned and coated with underbody protection. UVV valid. UVV documents available. Swap body was newly painted in pure white (RAL 9010). NEW PAINT !!!. LASI CODE XL !!!. Dimensions are approximate. Offer non-binding and subject to prior sale, prices net ex location D-59302 Oelde. Further details on request by phone or mail:

Condition: used, maximum load weight: 12,720 kg, overall weight: 16,000 kg, first registration: 01/2022, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, total width: 2,555 mm, total height: 2,925 mm, Year of construction: 2022, Vehicle No. G0122152 – Manufacturer: Krone. * Double-deck equipment * Standard corner fittings * Side/rear contour markings * Load bars * Load certificate Code XL * Beverage load certificate * Roller shutter (aluminum) * Internal keyhole system * Side panels with keyhole profile * Securing bars * Forklift accessible * Telescopic support legs * Railway loading device * Lashing points Ncodpfx Aox Rxhnjcysl New watertightness test. Double-deck configuration with double-deck load bars. Load securing certificate VDI 2700 / load securing for beverages. Delivery: IMMEDIATE. Technically operational condition with no further repairs required. Undercarriage shows signs of use. UVV (accident prevention regulation) is valid. UVV documents available. LASI CODE XL!!! Multiple units available! As-new condition! Dimensions are approximate. Offer is subject to prior sale. Prices are net ex-location D-59302 Oelde. For further details please contact us by phone or email.

Condition: used, maximum load weight: 13,120 kg, overall weight: 16,000 kg, first registration: 01/2015, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 46 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2015, Car number G0120444-1- Manufacturer: Krone. * Simple corner fittings * Contour marking side/rear * Load certificate Code-XL * Roller door (aluminum) * Keyhole system inside Njdpox Rxkpofx Acyscl * Forklift accessible * Support legs fixed * Device for rail loading Financing on request. Financing possible. NEW paintwork: Choice of color in RAL color possible when ordering!. Delivery time: IMMEDIATELY. Newly painted. Technically ready for use, body and support legs newly painted. Substructure (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. NEW PAINT!!!. LASI CODE XL!!!. Multiple available!. Dimensions are approximate. Offer subject to change and subject to prior sale, net prices ex location D-59302 Oelde. Further details available by phone or email:

Condition: used, maximum load weight: 12,560 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,675 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2016, Wagon no. G0119454_1- Manufacturer: Krone. * Double-decker device * Simple corner fittings * Contour marking rear * Contour marking side/rear * Load certificate Code-XL * Roll-up door (aluminum) * Keyhole system inside * Side walls with keyhole profile * Forklift accessible * Front wall niche * Fixed support legs * Device for rail loading * Lashing recesses * Lashing options Ncedpfx Aox Rxmkocyol Double-decker equipment without double-decker loading beam (available at extra charge!). Delivery time: IMMEDIATELY. Technically ready for use condition without further repair. Substructure with signs of wear, some rust. UVV valid. UVV documents available. scattered paint flaking on components of the swap body. scattered rust on components of the swap body. Deformations/stops on components/see pictures. Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on request by phone or e-mail: