Used Humbaur Trailers for sale (664)

Condition: new, overall weight: 2,000 kg, maximum load weight: 1,470 kg, axle configuration: 2 axles, loading space length: 2,680 mm, loading space width: 1,500 mm, loading space height: 300 mm, Year of construction: 2025, total width: 1,640 mm, total height: 950 mm, * HUK 202715 rear tipper 2.0 ton NEW VEHICLE * Tipper bed * Tipper * Car trailer * Rear tipper * Overall dimensions 4,160 x 1,640 x 950 mm * Internal dimensions 2,680 x 1,500 x 300 mm * Total weight 2,000 kg * Payload 1,470 kg * Tires 13 inches * Chassis and tipping bridge welded and hot-dip galvanized * V-groove outer frame with recessed lashing brackets, pulling force 400 kg per tie ring * Galvanized bridge floor (3 mm) Dobsvt Nb Ee Hdn Iiokl * Side walls 300 mm foldable all around * Drawbar locks * Conical corner stanchions * Automatic support wheel * Lighting protected in underrun protection * 3-stage telescopic cylinder * Double-acting hand pump * VAT can be shown Images contain accessories that are subject to a charge: 1. Aluminum sheet attachment 600mm 1200EUR 2. E-pump 1000EUR Optional accessories: -Steel grid 600mm 1200EUR -Side wall attachment 350mm 750EUR -HUK272715 from 4522¤ ATTENTION !!!!! READ THIS ESSENTIALLY !!!!! We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories that are subject to an additional charge. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 used and new trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, Functionality: fully functional, overall weight: 1,300 kg, empty load weight: 450 kg, maximum load weight: 850 kg, axle configuration: 1 axle, loading space length: 2,515 mm, loading space width: 1,510 mm, loading space height: 1,520 mm, tire size: 14 Zoll, color: other, *NEW VEHICLE* Humbaur HK 132515-15 P FlexZurr 1300 kg permissible total weight 450 kg unladen weight 850 kg payload Internal box dimensions 2515 x 1510 x 1527 mm Overall dimensions 3821 x 2000 x 2125 mm Loading height 535 mm 1 axle 14-inch tires V-shaped drawbar, hot-dip galvanized 13-pin plug Dob Hdjwginqjn Iijkl Base plate 15 mm thick Side walls and roof made of 15 mm thick plywood with UV-resistant plastic coating Interior light installed Double-leaf door Espagnolette lock and hinges galvanized 6 lashing rings in the frame profile, flexibly adjustable, tensile force 400 kg per lashing ring, DEKRA-tested Joint wheel Trade-in: We are happy to accept your trailer as a trade-in. Please provide us with your trailer number. Contact us or send us pictures and vehicle details. Delivery: Upon request, your trailer can be delivered to you with advance payment. The distance from Bielefeld to your destination costs 1.60 per kilometer, including VAT. We also offer the following services: -Service -Workshop -TÜV (German Technical Inspection) -Tires and Wheels -Tarpaulins and Racks -Custom-made parts in our metalworking shop -Rental Always around 400 trailers in stock! We look forward to your visit. Office, workshop, TÜV (German Technical Inspection), spare parts, rental, and exhibition space

Condition: new, Year of construction: 2023, HUK 27 27 15 Humbaur Car Trailer with standard equipment Technical specifications: braked Interior dimensions: approx. 2,680 mm x 1,500 mm x 300 mm Overall dimensions: approx. 4,160 mm x 1,640 mm x 950 mm Gross vehicle weight: 2,700 kg Payload: approx. 2,160 kg Tires: 13 inches Loading height: approx. 670 mm Drawbar length: approx. 1,390 mm Djb Hdn Isukkgmeiekl Coupling height: approx. 435 mm Rear tipping angle: approx. 45° FLEXePUMP (tipping with cordless screwdriver) Type II registration certificate

Condition: used, overall weight: 3,500 kg, maximum load weight: 2,870 kg, axle configuration: 2 axles, loading space volume: 2 m³, loading space length: 3,750 mm, loading space width: 1,850 mm, loading space height: 280 mm, first registration: 08/2021, next inspection (TÜV): 08/2025, total width: 2,100 mm, total height: 2,020 mm, Welded side wall/frame construction made of hot-dip galvanized sheet steel, excavator bucket storage mounted on the V-drawbar, solid walkable steel fenders, loading ramps (LxW) 1530x360 mm, load capacity per ramp 1500 kg, with anti-slip grid covering and integrated support feet, screen-printed floor, 6 x lashing eyes per side, AL-KO axle(s), support wheel at the front, overrun brake, handbrake, 13-pin trailer socket, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Dksbewbxzps Hdn Iiol We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: excellent (used), Functionality: fully functional, overall weight: 990 kg, maximum load weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,650 mm, loading space width: 2,260 mm, loading space height: 4,000 mm, first registration: 03/2022, next inspection (TÜV): 05/2026, tire size: 195/50 R13 104N, wheelbase: 4,040 mm, color: green, Equipment: tail-lift, Offered here is a vehicle transporter from Humbaur. Type MTK 354722. All loading walls can be folded away. The loading area can be tilted hydraulically (manually) and has a loading ramp. The tarpaulin has curtains on both sides. Dkjb Hov Haniedn Iisl A lockable anti-sway coupling has been retrofitted. The upper tarpaulin rods are bent inwards on two rods due to water load. However, this has no effect on the function.

Condition: new, overall weight: 16,000 kg, empty load weight: 4,710 kg, maximum load weight: 11,290 kg, axle configuration: 2 axles, loading space length: 5,530 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, suspension: steel, tire size: 435/50R19, Equipment: ABS, truck registration, | Humbaur tandem 3-way tipper | height-adjustable drawbar with crank 840-1100 mm | Galvanized frame, | Hydraulic connections | Loading area dimensions: L: 5.53m W: 2.55m Height: 1.75m | Rear support | Leaf spring, | Floor made of 4mm fine-grain steel, | 6 pairs of lashing rings, each 3000kg lashing point, | SAF axle with drum brake | Total weight: 18,000 kg, payload: 7,780kg | Towing eye 50mm | Tires: 435/50R19 | Operating voltage 24V | Errors, input and advance sales reserved. Djb Hjik Uqhsdn Iiekl

Condition: new, overall weight: 1,300 kg, maximum load weight: 1,050 kg, axle configuration: 1 axle, loading space length: 2,510 mm, loading space width: 1,310 mm, loading space height: 1,300 mm, Year of construction: 2025, total width: 1,806 mm, total height: 1,830 mm, Humbaur HA 132513 KV with tarpaulin and frame 1300 mm New car trailer, low loader. Total weight: 1300 kg Payload: 1050 kg Internal dimensions: 2510 x 1310 x 1300 mm Loading height: 530 mm Overall length: 3794 mm Overall width: 1806 mm Overall height: 1830 mm Standard equipment: ? V-drawbar, hot-dip galvanized ? 13-pin plug, reversing light (from 751 kg gross weight) ? 15 mm thick floor plate ? Flap(s) with recessed locks ? Side walls made of anodized, double-walled aluminum profile ? Lashing straps (4 up to 2050 mm / 6 from 2510 mm box length) integrated into the side walls, tensile force 400 kg per lashing strap, DEKRA-tested ? Humbaur multifunctional lighting integrated into the underride protection ? Corner stanchions with plug-in option New trailer, VAT is deductible. ATTENTION !!!!! PLEASE READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend an inspection and testing to ensure that the buyer is not misled about the condition and suitability. Inspections and testing are possible at any time by appointment and are expressly desired!!! Images are similar, may contain accessories for which an additional charge is required. The stated interior dimensions are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-INS AVAILABLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Dkob Hdjwfwhcsn Iijl Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, Functionality: fully functional, overall weight: 1,800 kg, empty load weight: 560 kg, maximum load weight: 1,240 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,565 mm, loading space height: 1,600 mm, tire size: 13 Zoll, color: white, *NEW VEHICLE* Humbaur HKT 182515-18P 1800 kg permissible total weight 560 kg unladen weight Dkeb Hdswf N Afjn Iiel 1240 kg payload Internal box dimensions 2500 x 1565 x 1600 mm Overall dimensions 4085 x 2250 x 2040 mm Loading height 420 mm Braked 1 axle 13-inch tires 100 km/h approval Shock absorbers installed 6° ramp angle Side door 600 x 1400 mm Bolt-mounted, hot-dip galvanized chassis Loading bed mechanically lowered Mechanical safety lock of the pivot axle during operation Humbaur multifunctional lighting Aluminum floor 4 pairs of integrated lashing rings (tensile force 400 kg per lashing ring, DEKRA-tested) 6 additional lashing points recessed into the aluminum floor Side walls and roof made of plywood 14 mm thick with GRP coating Interior light installed Tailgate opens upwards Internal ramp Galvanized espagnolette lock and hinges Trade-in: We are happy to accept your trailer as a trade-in. Please contact us or send us pictures and vehicle details. Delivery: Upon request, your trailer can be delivered to you with advance payment. The cost per kilometer (distance from Bielefeld to your destination) is €1.60 including VAT. We also offer the following services: -Service -Workshop -TÜV (German Technical Inspection) -Tires and Wheels -Tarpaulins and Racks -Custom-made parts in our metalworking shop -Rental Always around 400 trailers in stock! We look forward to your visit. Office, showroom, workshop, TÜV (German Technical Inspection), rental, and spare parts

Condition: new, overall weight: 48,000 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Equipment: ABS, HUMBAUR 3-axle low loader semi-trailer with offset loading area, Typ. HTS30K-V44+ --- INCLUSIVE lift axle INCLUSIVE self-steering axle with SAF air suspension INCLUSIVE 3-meter package INCLUSIVE stowage box under cargo bed INCLUSIVE TIM/WABCO Smart Board for axle load display INCLUSIVE Hot-dip galvanized chassis INCLUSIVE ALU drop sides and stowage box to the semi-trailer platform INCLUSIVE stake pockets and lashing ring package INCLUSIVE excavator trough Equipment: V44+ * Gross vehicle weight 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized * SAF air suspension unit including lifting and lowering * INCLUSIVE hot-dip galvanized chassis * Lift axle with starting aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * LED lighting system * Loading height approx. 890 mm Dsb Hdokn N S Usn Iijkl * Saddle height: approx. 1,230 mm * 235/75R17.5 tires - 12-ply * Drop deck length approx. 8,680 mm incl. slope * Saddle platform length approx. 3,500 mm incl. slope * Excavator trough * 2" kingpin can be offset by 340 mm for 2+3-axle SPM * Gooseneck with 400 mm bulkhead * 400 mm folding aluminum side wall + storage box with lid * Ramp rail at the offset to the gooseneck * 3 pairs of lashing rings 6 tons sunk into the raised bed * 3 pairs of lashing points 3 tons in the bunk bed outer frame * 5 pairs of lashing rings 10 to. recessed in the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 3 pairs of stake pockets in the outer frame of the high bed * 5 pairs of stanchion pockets in the low bed outer frame * 3-meter widening package with folding boom, wooden planks * Sheet steel toolbox under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Warning package with lighting * Rotating beacon at the rear * 1-section ramps approx. 3150 x 750 mm - drive-on angle approx. 10° * Softwood flooring on ramps, low loading & semi-trailer platform * Spring lifting gear to the ramps * COC papers * 48,000 kg GVW only with special permit according to §70 * Climbing rails on the ramp slope * Brake connection: red/yellow * Electrical system: 3-way socket with 2x7-pin socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 --- Example pictures - equipment may vary ! ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Condition: used, overall weight: 3,500 kg, maximum load weight: 2,870 kg, axle configuration: 2 axles, loading space volume: 2 m³, loading space length: 3,750 mm, loading space width: 1,850 mm, loading space height: 280 mm, first registration: 08/2021, next inspection (TÜV): 08/2025, total width: 2,100 mm, total height: 2,020 mm, Welded side wall/frame construction made of hot-dip galvanized sheet steel, excavator bucket storage mounted on the V-drawbar, solid walkable steel fenders, loading ramps (LxW) 1530x360 mm, load capacity per ramp 1500 kg, with anti-slip grid covering and integrated support feet, screen-printed floor, 6 x lashing eyes per side, AL-KO axle(s), support wheel at the front, overrun brake, handbrake, 13-pin trailer socket, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Dksb Hev Hvw Tedn Iisl

Condition: new, overall weight: 750 kg, empty load weight: 122 kg, maximum load weight: 628 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,310 mm, loading space height: 350 mm, first registration: 04/2025, next inspection (TÜV): 04/2028, color: silver, Year of construction: 2025, Equipment: tail-lift, Car trailer - aluminum - Made in Germany - , 1x rear flap. The Humbaur brand low loader is built with a unique frame/side wall construction made of sturdy and anodized aluminum. The multiple waterproof glued multiplex floor with anti-slip phenolic resin coating and 15 mm thickness is ideal for all purposes. Due to the outstanding construction, the floor is pushed into the side walls, and can also be easily replaced in the event of damage. V-drawbar hot-dip galvanized (dip bath), base plate 15 mm thick, side walls made of anodized aluminum, flap with recessed locks, optimized fenders, internal dimensions of the structure Lx Wx H / 2050x 1010x 300 mm, price including registration certificate part II. The following accessories are available for an additional charge: spare wheel, support wheel with crank, wheel shock absorber for 100 km/h confirmation, 2x parking supports, side wall attachment, 4x lashing rings - pulling force 400 kg - per lashing ring - railing, perforated railing, flat tarpaulin, tarpaulin + bow in various heights and colors. Car trailer pictures contain special equipment (extra charge). Tarpaulin + bow here 1600 mm high from the loading area, trailer in Berlin- Hönow. Ask us, we will be happy to advise you. Large exhibition with many brands, many models. Car trailers, trailer sales, trailer rentals with large exhibition Interesting financing options!! Delivery is possible for a small surcharge. This offer is non-binding. Subject to errors, changes and prior sale. none! Fair trade-in/trailer purchase/financing/leasing/ possible. 24-month manufacturer's guarantee. Delivery time: * immediately, if no longer in stock in 4-6 weeks. * Subject to technical changes, images do not always correspond to the standard equipment! * Information without guarantee, subject to errors and prior sale. * Initial contact via phone. * Contact via phone. * No email reception. Dob Hjwf Ap Sodn Iijkl

Condition: new, overall weight: 11,900 kg, maximum load weight: 9,100 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 400 mm, Year of construction: 2025, total width: 2,550 mm, total height: 3,260 mm, Equipment: ABS, Humbaur HBT 106224 BS Heavy-Duty Low-Load Trailer Tandem High-Load Trailer Standing Planks New Vehicle Overall dimensions in mm: 8400 x 2550 x 3260 Interior dimensions in mm: 6200 x 2450 x 400 Loading height: 920 mm Total weight: 11900 kg Unladen weight: 2800 kg Payload: 9100 kg Djb Hewfmgbjdn Iijkl Tires in inches: 235/75 R 17.5 Ramps in mm: 2600 x 540 Rotating beacon on the ramp, optional Reverse light, optional 2x tool boxes CHASSIS: ? Axles from renowned manufacturers ? Maintenance-free parabolic suspension with load compensation ? Tires of the manufacturer's choice ? Tire Pressure Monitoring System (TPMS) including Auto Locate BRAKING SYSTEM: EBS braking system according to ECE guidelines 2 interchangeable coupling heads red/yellow ISO 1728 Spring-loaded parking brake ELECTRICS: 24-volt lighting system with LED multi-chamber taillights and flashing LED side marker lights 15-pin connector for lighting TOWING DEVICE: Galvanized towbar with 40 mm diameter screw tow eye Coupling height continuously adjustable via crank CHASSIS FRAME: Solid, welded chassis frame, hot-dip galvanized Sloped rear loading area Floor covering made of 40 mm softwood planks, painted/impregnated BODY: Anodized aluminum side walls, 400 mm high, foldable to the side and removable ? Galvanized corner stanchions, pluggable at the front and rear LOAD SECURING: ? 7 pairs of 2-ton lashing points in the outer frame ? 3 pairs of 6-ton lashing points recessed into the deck floor SUPPORTING: ? Reinforced 12-ton geared landing gear with load and high-speed gear ? 2 telescopic folding supports on the left and right at the rear of the vehicle RAMPS: ? 2 foldable, one-piece steel ramps, galvanized, laterally adjustable ? Ramp jacks (1 gas spring per ramp) ? Ramp securing devices on the rear stanchions ? Ramps with grating EQUIPMENT: ? Galvanized steel fenders with anti-spray system ? Side impact protection up to the first axle, foldable ? Contour markings on the sides and rear ? 2 wheel chocks with holder, space for a two-line license plate ATTENTION !!!!! PLEASE READ !!!!! We expressly reserve the right to sell this item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and inspection to ensure that the buyer is not under any misconception regarding its condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome! Images are similar, may contain accessories for an additional charge. The stated interior dimensions are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,200 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp Dob Hdn Iskn N Rwjiekl * Approx. 13° drive-on angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: used, overall weight: 2,000 kg, maximum load weight: 1,540 kg, axle configuration: 2 axles, loading space volume: 2 m³, loading space length: 2,970 mm, loading space width: 1,350 mm, loading space height: 350 mm, first registration: 10/1993, total width: 1,850 mm, total height: 1,300 mm, Folding ramp wall approx. 1,490 mm long, V-drawbar, side walls made of screen printing plates, sheet steel floor, 2 rear drop supports, overrun brake, handbrake, jockey wheel, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Dob Hdou Eabqen Iijkl We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: new, overall weight: 2,000 kg, maximum load weight: 1,538 kg, axle configuration: 2 axles, Humbaur HT 203116 New vehicle Tarpaulin and frame Overall dimensions in mm: 4514 x 1713 x 1060 Interior dimensions in mm: 3100 x 1650 x 1800 Total weight: 2000 kg Payload: 1538 kg Unladen weight: 462 kg Loading height: 720 mm Tires: 13 inches Standard equipment: Hot-dip galvanized V-drawbar 13-pin plug and reversing light Base plate 18 mm thick Anodized aluminum side walls with recessed locks, fully removable Lashing rings integrated into the V-shaped outer frame profile, pulling force 400 kg per lashing ring, Joint wheel New trailer, VAT is deductible. Dkeb Hdnswfmf Ro Iijl ATTENTION !!!!! PLEASE READ THIS !!!!! We expressly reserve the right to sell this item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and inspection to ensure that the buyer is not under any misconceptions about its condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome! Images are similar, may contain accessories for which an additional charge is required. The interior dimensions stated are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Trailer GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, overall weight: 21,000 kg, empty load weight: 4,600 kg, maximum load weight: 166,400 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, loading space height: 3,710 mm, suspension: air/air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- --- HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale Dsb Hdokcuyzon Iijkl ∗Price ex works

Condition: new, overall weight: 30,000 kg, maximum load weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABOLIC SUSPENSION - V2 --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS braking system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon Dsb Hdekn N R Een Iiokl Equipment: * 24 months warranty * Gross vehicle weight 30,000 kg * Payload approx. 24,000 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * 3 pairs of lashing rings 10 tons recessed in the drop deck * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 4 pairs of lashing points 2 tons above wheel cut-out 2nd and 3rd axle * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting gear and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit according to §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Modular design for easy retrofitting of 3 m folding extension, storage box in the high bed, plank box under the cargo bed, etc. --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABLE SUSPENSION - V2-Plus --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS brake system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon INCLUSIVE stake pockets & lashing ring package INCLUSIVE storage box at the top front of the platform, with hinged lid INCLUSIVE 3-meter package with storage compartment Equipment: Deb Hdjkn N S Asn Iiskl * 24-month warranty * Gross vehicle weight 30,000 kg * Payload approx. 23,500 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * Storage box at the top front of the plateau, with hinged lid * 3 pairs of lashing rings 10 to. recessed in the low bed * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 4 pairs of lashing points 2 to. over wheel cut-out 2nd and 3rd axle * 6 pairs of stanchion pockets in the outer frame (stanchion pocket package) * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting mechanism and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * 3-meter widening package with folding boom, wooden planks * Sheet steel tool box under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit in accordance with §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Optional variants at extra cost: * V2 Plus with hydr. ramp lift = € 1,000 net surcharge * V2 PlusPlus (spring lifter) with excavator trough = 700 € net surcharge * V2 PlusPlus with hydr. ramp lift & excavator trough = € 1,700 net surcharge --- ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,300 kg, axle configuration: > 3 axles, loading space length: 7,130 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: full air, Equipment: ABS, center pivot plate, trailer coupling, Humbaur HTD40-K V20 Total weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Dksb Hdn Iskn N Sueijl Bogie frame hot-dip galvanized Drive-on ramps hot-dip galvanized Air suspension with manual REAR lowering at the rear SAF axle with drum brake EBS electronic braking system Tires 235/75R17.5 – 16-fold Low bed length approx. 7160 mm Hole for excavator boom storage, approx. 3000 mm x 730 mm x 180 mm in the rear area of the low bed 4 pairs of lashing rings 10 tons sunk in the low bed 2 pairs of lashing rings 10 tons sunk in the high bed 4 pairs of lashing points 3 tons in the outer frame of the low bed 3 pairs of lashing eyes 6 tons on the outer frame 4 pairs of stake pockets in the outer frame of the high bed 4 pairs of stake pockets in the outer frame of the low bed 3-meter widening package with folding boom without slope 4 x warning signs with lighting Beacon at the rear Storage compartment under the loading area 2 storage compartments with hinged lid in the high plateau Hydraulic ramp jacks 1-part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVW only with special approval according to §70 ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 13,000 kg, empty load weight: 2,800 kg, maximum load weight: 10,200 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 3,260 mm, tire size: 245/70 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation Dkjb Hdjkn N R Tsn Iijl * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Condition: new, overall weight: 1,900 kg, maximum load weight: 14,500 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: full air, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS --- INCLUDING SAF air suspension with lifting/lowering valve Dsb Hokn N Siodn Iiskl INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle Dkjbjkn N Sxs Hdn Iijl HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 7,200 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-wheel) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, tire size: 285/70 r19,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 14.4 ton tandem three-way tipper with ramp shaft and automatic rear side wall release, type HTK 145024 DL --- --- INCLUDING AUTOMATIC REAR SIDE WALL RELEASE INCLUDING THROUGH-LOADING VERSION INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWING TUBE INCLUDING HOT-DIP GALVANIZED TIPPING BRIDGE & SIDE WALLS INCLUDING LOCKABLE RAMP SHAFT WITH COVER (privacy screen) --- --- TOP! We also offer you optional ALUMINUM docking ramps with our PATENTED LOCKING using a safety claw under the ramps. The locking mechanism is operated from the side, the claw grips into the rear carrier provided as standard, which means that the ramp is secured quickly and easily. * Simple & quick handling * No loose parts as with a locking pin (risk of loss) * No drilling in the rear carrier / floor panel necessary --- --- Equipment: * Permissible total weight 14,400 kg Deb Hokcuy Ejdn Iiekl * Payload approx. 10,900 kg * Loading area approx. 5,030 x 2,420 mm * Loading height unloaded approx. 1,050 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,580 mm * Bridge floor made of 4 mm fine-grain steel * Refinement of the tipping bridge and side walls with complete hot-dip galvanization * Laser-welded quality steel side walls, 500mm high * Side walls can be folded down at the side and rear, removable and swinging, screwed with central locking * Rear wall with automatic rear side wall release * Rear stanchions galvanized and screwed * Side wall lifting springs on the side side walls * Solid front wall made of galvanized steel, foldable to the front (through-loading system) * Drawbar with horizontal spindle, infinitely height-adjustable for coupling heights unloaded. approx. 760 - 1,050 mm * DIN screw towing eyelet Ø 40 mm * Reinforced 12 t geared support winch with load and fast gear * 10 3 ton lashing rings recessed * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable receiving slot for 2 optional loading ramps integrated in the frame * 2-circuit pneumatic brake system with ALB function * EBS brake system 24 volt * Spring-loaded fixed brake * Hydraulic three-way tipping mechanism controlled via the towing vehicle (max. 200 bar); five-stage tipping cylinder with stroke limiter and safety ropes; hydraulic plug-in coupling SVK BG3 as single-circuit connection; * Fender with splash guard system * Chassis frame with drawbar hot-dip galvanized * Tires 285/70 R19.5 * Maintenance-free parabolic suspension with load compensation * Electrics: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection for the entire trailer thanks to hot-dip galvanization * Through-loading system with foldable front wall * Rear wall with automatic Unlocking when tipping backwards * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the aluminum loading ramps * Ideal options for securing loads thanks to lashing options as standard * Height-adjustable drawbar enables compatibility with the different coupling heights of the towing vehicles * Low deadweight => therefore high payload Optionally, we offer you for an additional charge: * 1 pair of aluminum loading ramps (10 t/pair) with patented locking, length approx. 3,570 mm x width approx. 400 mm (deadweight approx. 65 kg/each) * Plastic toolbox mounted under the loading area ∗Stock vehicle - available immediately

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,700 kg, axle configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 600 mm, tire size: 435/50 r19,5, color: white, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 18.0 to tandem three-way tipper with ramp shaft, Typ. HTK 185024 Premium --- INCLUDING SAF air suspension with lifting & lowering function INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR including lockable ramp cover with lid (privacy screen) Equipment: * Permissible total weight 18,000 kg * Payload approx. 13,700 kg * Loading area approx. 5,030 x 2,420 mm * Unloaded loading height approx. 1,135 mm * Overall dimensions: LxWxH approx. 7,000 x 2,550 x 1,750 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body and drop sides in the desired color (RAL 9010 pure white) or hot-dip galvanized * Laser-welded quality steel drop sides, 600 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking bolted on * Removable rear stanchions * Dropside lifting springs on the side drop sides * Drawbar with spindle infinitely height-adjustable for coupling heights unbel. approx. 840 - 1,100 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t geared support winch with load and fast gear * SAF air suspension with lift & lower function * 10 6 t lashing rings recessed * Lateral / rear tipping angle: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable mounting shaft for 2 optional drive-on ramps integrated in the frame * 2-circuit air brake system * EBS brake system 24 volt * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 435/50 R19.5 tires * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: Dsb Hdnjkn N Sfj Iiokl * Optimum corrosion protection through hot-dip galvanizing * Lower loading height thanks to the 435 tires * Safe loading and unloading thanks to telescopic folding supports at the rear * Ideal load securing options thanks to standard lashing options * Height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (10 t or 13 t/pair) with pin lock, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 65-75 kg/each) * Plastic toolbox mounted under the loading area * LED rear lights 24 Volt or LED multi-voltage system for 12&24 Volt ∗Stock vehicle - available immediately ∗Subsequent sale reserved ∗Price ex works

Condition: new, overall weight: 7,500 kg, empty load weight: 2,250 kg, maximum load weight: 5,250 kg, axle configuration: 2 axles, loading space length: 6,070 mm, loading space width: 1,450 mm, loading space height: 2,200 mm, suspension: air/air, tire size: 215/75 r15,7, color: orange, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 7.5 to tandem three-way tipper with ramp shaft, Typ. HTK 754020 Premium --- --- INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAW TUBE INCLUDING HOT-DIP GALVANIZED TIPPER BODY including lockable ramp cover with lid (privacy screen) --- --- Equipment: * Permissible total weight 7,500 kg * Payload approx. 5,250 kg * Loading area approx. 4,000 x 2,030 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 6,070 x 2,200 x 1,450 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body & chassis through complete hot-dip galvanizing * Side walls in RAL color of choice (galvanized for an additional charge) * Laser-welded quality steel drop sides, 400 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking; galvanized plug-in & quickly removable rear stanchions * Solid front wall made of galvanized steel, plugged and removable * Infinitely height-adjustable drawbar for coupling heights unloaded approx. 560 - 900 mm * DIN screw drawbar eye Ø 40 mm * Heavy-duty automatic support wheel Djb Hen Sl Htjdn Iiskl * 2 pieces of 3 to lashing rings recessed in the corners * 3 pairs of 1 to drop lashing brackets recessed in the outer frame * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable storage shaft with plastic rollers for 2 optional ALU drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-sided tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 215/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU ramps * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally available for an extra charge: * 1 pair of ALU drive-on ramps (4.4 t/pair) with support legs at the rear, length approx. 3,050 mm x width approx. 400 mm (tare weight approx. 31 kg/each) * Plastic toolbox mounted under the loading area * Galvanized side walls * 24 volt electro-hydraulic system with battery and remote control * Steel attachments etc. ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works - Gersthofen