Used Böckmann Dk Trailers for sale (292)

Condition: new, maximum load weight: 2,440 kg, overall weight: 3,500 kg, loading space length: 3,240 mm, loading space width: 1,800 mm, ANHÄNGERWIRTZ, the online marketplace for purchasing your new trailer, offers high-quality branded products! Over 850 new trailers in stock Over 130 used trailers constantly available Non-binding example: Category "Buy three-way tipper" – only while supplies last! Böckmann tipper DK AL 3218/35 Profi Elektro + NHP 3500kg Three-way tipper DK-AL 3218/35 Profi E 324x180x35cm, 3500kg, ALKO tandem high-loader chassis, aluminum sideboards with angled lever locks, foldable on all four sides, removable, steel sheet on the loading platform, electro-hydraulically tippable, separate battery, emergency hand pump, emergency stop, 2+2 recessed DIN lashing eyes, rattle-free, solid automatic support wheel... Lsdpfszii E Eox Afkjad 😊 New Sales around the clock via our online shop on Sales via telephone order: MON – 8:00 AM to 12:30 PM & 2:00 PM – 6:00 PM or around the clock via our online shop on trailershop Content and images are subject to copyright – logos are trademark protected 07/26 Manufacturer: Böckmann Fahrzeugwerke GmbH Article No.: 1141164 Financing purchase Shipping method: Freight item

Condition: used, maximum load weight: 2,510 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 08/2022, next inspection (TÜV): 06/2028, loading space length: 3,240 mm, loading space width: 1,800 mm, loading space height: 350 mm, total width: 1,970 mm, total height: 1,110 mm, Year of construction: 2022, Böckmann DK 3218/350 Alu * Platform trailer Laedpfxszkquqe Afkjd * 3-way tipper * 1st owner * Registration date: 09.08.2022 * Next inspection: 06/2028 * Gross vehicle weight: 3500 kg * Payload: 2510 kg * Tare weight: 990 kg * Overall dimensions: 4890 mm x 1970 mm x 1110 mm * Internal dimensions: 3240 mm x 1800 mm x 350 mm * 100 km/h approved * V-shaped drawbar * Chassis and tipper body hot-dip galvanized * Electric pump with manual emergency pump * Multifunction lighting * Aluminum sideboards, completely removable * Rear flap swingable * Tie-down points * Automatic support wheel * Log rack * 13-pin connector ATTENTION!!!!! PLEASE READ!!!!! We expressly reserve the right of interim sale, as we also offer this item on other platforms. We strongly recommend an inspection and assessment so that the buyer does not develop any false expectations regarding the condition and suitability. Inspections and assessments are possible and expressly desired at any time by prior appointment!!! Errors and typos excepted! No guarantee for the accuracy of information! The stated internal dimensions are approximate. For new vehicles, additional costs for transport and paperwork may apply. TRADE-INS ARE POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND PAYMENT PLANS ARE POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, 9935277 Böckmann three-way tipper No hidden costs with us! Freight and vehicle documents are included in the selling price! Manufacturer: Böckmann Type: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 350 mm (L x W x H) Permissible total weight: 3500 kg Unladen weight: 1047 kg Payload approx. 2453 kg (payload specifications may vary depending on equipment and design) Electric hydraulic pump with battery (12 V/88H) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump; can be attached to any desired location on the frame EMERGENCY power cut-off battery disconnect switch ALKO heavy-duty automatic support wheel Aluminum side walls Removable steel corner posts Removable side walls Folding front wall allows for the transport of longer materials Swing-out rear flap Integrated extraction flap for loading ramps at the rear Integrated securing bar for attaching loading ramps at the rear Welded and hot-dip galvanized construction of the frame and tipping platform ensures increased stability, resistance to twisting and tipping 4 stable, rattle-free lashing eyes (tensile force 500 kg) (different from the images) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes Tire size 14 ensures high ground clearance Safety support for fixing the tipper platform during maintenance Robust lever locks on the side walls Plastic mudguards, rear with mud flaps included Dimensionally stable combination floor - Solid screen printing plate reinforced with galvanized steel floor for high point loads and impact resistance Contour lights at the front 2 large wheel chocks Bolted V-drawbar Protected housing for the battery and all electronics in a splash-proof box Hydraulic hoses securely routed in the longitudinal member Includes vehicle documents Possible additional options and accessories for this trailer: Ramp housings including aluminum loading ramps Crank supports Charger for tipper with electric pump and adapter Grid extension (600mm or 1000 mm) Side wall extension Load securing net Net hooks mounted all around on the side wall Additional side wall extension 350mm Toolbox or storage box mounted on the front wall or under the loading area Flat sheet in different colors Lasdszaxx Repfx Afkod Wheel shock absorbers including 100 km/h approval Individual tarpaulin construction Registration of your new trailer at the vehicle registration office

Condition: new, 9930270 Böckmann Three-Way Tipper Trailer with Electric Pump and Steel Sidewalls – Professional Series Manufacturer: Böckmann Model: DK-ST 3718/35 P Internal dimensions: 3740 x 1800 x 400 mm (L x W x H) Gross vehicle weight rating: 3,500 kg Unladen weight: approx. 1,170 kg Payload: approx. 2,330 kg (payload may vary depending on equipment and specification) Electric hydraulic pump with 12V/88H battery and manual emergency pump Magnetic wired remote control with flexible spiral cable for the electric pump, can be attached anywhere on the frame Emergency shut-off battery disconnect switch ALKO heavy-duty automatic jockey wheel Extra robust hot-dip galvanized steel sidewalls, 400 mm Removable steel corner posts Removable sidewalls Drop-down front panel allows transport of longer materials Rear tailgate with swing function Integrated access flap for loading ramps at the rear Integrated securing rail for attaching loading ramps at the rear Welded and hot-dip galvanized chassis and tipping bridge for increased stability, torsion, and tipping resistance 4 sturdy, rattle-free lashing rings (lashing force 500 kg) Lsdpfx Afoy Na Tpjkjad Pre-drilled holes in the side frame for easy retrofitting of additional lashing points 14" tyres ensure generous ground clearance Safety support for securing tipper bridge during maintenance Heavy-duty lever locks on sidewalls Plastic mudguards at the rear incl. mud flaps Rigid combination floor – continuous phenolic plywood reinforced with galvanized steel for high point-load capacity and shock resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Battery and full electronics safely housed in a splash-proof box Hydraulic hoses safely routed in the longitudinal chassis member Vehicle documents included Optional extras and accessories for this trailer: Ramp compartments incl. aluminum loading ramps Crank supports Charger for tipper with electric pump and adapter Mesh extension (600 mm or 1,000 mm) Sidewall extension Load securing net Continuous net hooks mounted on sidewall Additional 350 mm sidewall extension Toolbox or storage box mounted on front wall or beneath the loading platform Flat tarpaulin in various colors Shock absorbers incl. 100 km/h certification Custom-built tarpaulin superstructure For tailored, individual financing, please contact us directly! Over 1,500 trailers in stock at Anhänger-Centrum Rosemeier. Visit us and let our team advise you. Please note: Images may show accessories not included in standard delivery. Due to ongoing product development, images and technical data may vary slightly. Errors and changes excepted!

Condition: new, Böckmann Three-Way Tipper with Electric Pump, Mesh Extension Sides, and Steel Drop Sides in Professional Version Manufacturer: Böckmann Model: DK-ST 3718/35 P Internal dimensions: 3740 x 1800 x 965 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: approx. 1,170 kg Payload: approx. 2,330 kg (payload may vary depending on equipment and construction) Mesh extension sides (600 mm or 1000 mm) Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump attaches anywhere on the frame Emergency battery cut-off switch ALKO heavy-duty automatic jockey wheel Extra robust, hot-dip galvanized steel drop sides, 400 mm Removable steel corner posts Detachable side panels Foldable front panel allows transport of longer materials Rear pendulum tailgate Integrated ramp compartment at the rear for loading ramps Integrated securing rail for attaching loading ramps at the rear Welded and hot-dip galvanized frame and tipping bridge construction for enhanced stability, torsional rigidity, and tip safety 4 sturdy, rattle-free lashing eyes (pulling force 500 kg) Integrated lateral frame perforations for easy retrofitting of additional lashing rings 14-inch tires provide high ground clearance Safety support to secure the tipper bed during maintenance Robust angle lever latches on the drop sides Lodpey Na R Iefx Afkead Plastic mudguards with rear mudflaps Dimensionally stable combo floor – continuous phenolic plywood reinforced with galvanized steel for high point load capacity and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected battery and electronics housed in splash-proof box Hydraulic hoses routed securely in the longitudinal member Including vehicle documents Possible additional options and accessories for this trailer: Ramp compartments including aluminum loading ramps Crank supports Charger for tipper with electric pump and adapter Side panel extension Load securing net Continuous net hooks on the drop sides Additional side panel extension (350 mm) Toolbox or storage box mounted on front wall or under the loading bed Flat tarpaulin in various colors Shock absorbers including 100 km/h certificate Custom tarpaulin superstructure For a tailored and individual financing offer, please contact us! Over 1,500 trailers in stock at Trailer Center Rosemeier. Come and visit us. We are happy to advise you. Please note: Illustrations may show optional accessories not included in the standard delivery. Due to ongoing improvements, images and technical data may differ slightly. Errors and changes excepted!

Condition: new, Böckmann Three-Way Tipper - ECO - Special Model - No hidden costs with us! Freight and vehicle documents are included in the sale price! - Manufacturer: Böckmann Model: DK-AL 3016/30 Eco Internal dimensions: approx. 3060 x 1650 x 300 mm (L x W x H) Gross vehicle weight: 2,700 kg Unladen weight: approx. 750 kg Payload: approx. 1,950 kg (payload may vary depending on equipment and configuration) Base frame and steel profile platform hot-dip galvanized Exceptional stability, torsional and tilt rigidity thanks to continuous longitudinal beams in the upper chassis Hydraulic tilting with hand pump Safety support leg Non-interchangeable securing pins Prepared rail storage in the lower frame allows for retrofitting of rail profile angles and rails Side panels in anodized aluminum Removable steel corner posts 4 flush-mounted, rattle-free lashing rings in the side panel Folding front wall Plastic mudguards at the rear 14-inch tires Steel rims Including vehicle documents Potential additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Electric hydraulic pump with battery (12 V / 88Ah) and emergency hand pump Mesh side extension, 600 mm, swing-mounted on 3-sides Continuous mesh hooks on the side panel Additional side wall extension 350 mm Loading ramps Tool box mounted on the front wall or under the loading area Load securing net Lodpsy Na Adsfx Afkoad Flat tarpaulin in various colors Registration of your new trailer with the local vehicle registration office We are happy to show you convenient monthly financing options and provide an individual financing offer. We have over 2,000 trailers in stock at all times. A large selection of our trailers can be found online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show accessories not included in standard delivery. Due to ongoing product improvements, images and technical data may differ slightly. Subject to errors and changes!

Condition: new, Three-way tipper trailer with electric pump Manufacturer: Böckmann Model: DK-AL 3218/30 Internal dimensions: 3240 x 1800 x 350 mm (LxWxH) Gross vehicle weight: 3,000 kg Unladen weight: approx. 955 kg Payload: approx. 2,045 kg (payload figures may vary depending on equipment and configuration) Wheel size: 14 inches Electric hydraulic pump with 12 V/88Ah battery and emergency hand pump Laedoy Napkjpfx Afksd Automatic jockey wheel Removable steel corner posts Track channel in upper frame (easy retrofitting of loading ramps) Removable side panels 4 sturdy, rattle-free lashing rings Safety support for securing the tipping body during maintenance Fold-down front wall Robust lever locks on the side panels Plastic rear mudguards incl. mud flaps Heavy-duty phenolic plywood flooring with galvanized sheet steel cover for high point loads 2 large wheel chocks Front position lights Drop-down front wall for transporting longer materials V-drawbar Robust net hooks laterally beneath the loading area Incl. vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h road approval Swing tailgate (shown in photos, not included as standard but available as an accessory) Mesh extension, 600 mm high, foldable on three sides Net hooks mounted all around the side panel Additional side panel extension 350 mm Aluminum loading ramps with 2.7 t load capacity Toolbox mounted on the front wall or under the loading area Load securing net Flat tarpaulin in various colors Registration of your new trailer with the vehicle registration office We would be happy to show you convenient monthly financing options and provide you with a tailored financing offer. We have more than 2,000 trailers in stock at all times. You can find a wide selection of our trailers online or visit us in Horn-Bad Meinberg – we look forward to seeing you! Please note: Images may show accessories and optional equipment not included in the standard delivery scope. Due to ongoing developments, images and technical data may differ slightly. Errors and changes excepted.

Condition: new, Böckmann Three-Way Tipper - ECO - Special Model with Side Extensions Lodpfx Afoy I N Dneksad - No hidden costs with us! Freight and vehicle documents are included in the sale price! - Manufacturer: Böckmann Model: DK-AL 3218/27 P Eco Internal dimensions: 3240 x 1800 x 700 mm (L x W x H) Gross vehicle weight: 2700 kg Unladen weight: approx. 935 kg Payload approx. 1765 kg (payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for E-pump – attaches anywhere on the frame Emergency battery isolation switch ALKO heavy-duty automatic jockey wheel Aluminum side panels 350 mm side extension Removable steel corner posts Removable side panels Fold-down front board allows transport of longer materials Rear pendulum tailgate Integrated ramp storage compartment at the rear Integrated safety strip for attaching loading ramps at the rear Welded and hot-dip galvanized frame and tipping bridge for increased stability, torsion, and tipping resistance 6 robust, rattle-free lashing rings in the side rail (load capacity 500 kg) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14" tires for high ground clearance Safety support for fixing the tipper body during maintenance Robust angle lever fasteners on the side panels Plastic mudguards, rear includes splash guards Dimensionally stable combination floor – continuous plywood panel reinforced with galvanized steel base for high point loads and impact resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for battery and entire electronics in splash-proof box Hydraulic hoses securely routed in the longitudinal beam Vehicle documents included Available options and accessories for this trailer: Ramp storage channels incl. aluminum loading ramps Screw jacks Charger for tipper with electric pump and adapter Mesh side extension (600 mm or 1000 mm) Load securing net Net hooks mounted along the side board Additional side extension 350 mm Toolbox or storage box mounted on the front wall or under the loading platform Flat tarpaulin in various colors Shock absorbers incl. 100 km/h certificate Custom tarpaulin structure Registration of your new trailer at the vehicle registration office

Condition: new, Böckmann Three-Way Tipper No hidden costs with us! Freight and vehicle documents are included in the sales price! Manufacturer: Böckmann Model: DK-AL 3218/35 P Eco Internal dimensions: 3240 x 1800 x 350 mm (LxWxH) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (Payload data may vary depending on configuration and construction) - Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump - Magnetic remote control with flexible spiral cable for E-pump can be attached anywhere on the frame - Emergency stop battery disconnect switch - ALKO heavy-duty automatic jockey wheel - Aluminium drop sides - Removable steel corner posts - Removable drop sides - Folding front panel allows transport of longer materials - Rear swing tailgate - Integrated ramp access flap at the rear - Integrated securing rail for attaching ramps at the rear - Welded and hot-dip galvanized frame and tipper bridge construction provides increased stability and torsional/kipping resistance - 4 robust, rattle-free lashing rings (pulling force 500 kg) (contrary to pictures) - Integrated holes in the side frame profile for easy retrofit of additional lashing eyes - 14'' tyres for high ground clearance Laodpfx Aey I N Adefkod - Safety support to secure the tipper bridge during maintenance - Sturdy lever-mechanism locks on the drop sides - Plastic rear mudguards including mud flaps - Rigid combined floor: continuous screen-printed base board reinforced with galvanized steel floor for high point loads and shock resistance - Front position lamps - 2 large wheel chocks - Bolted V-drawbar - Protected housing for battery and entire electronics in a splash-proof box - Hydraulic hoses safely routed through the longitudinal chassis member - Vehicle documents included Possible additional options and accessories for this trailer: - Ramp channels incl. aluminium loading ramps - Crank supports - Charger for tippers with E-pump and adapter - Mesh side extension (600 mm or 1000 mm) - Drop side extension - Load securing net - Net hooks all around the drop side - Additional 350 mm drop side extension - Tool box or storage box mounted on the front panel or underneath the loading platform - Flat tarpaulin in various colours - Shock absorbers incl. 100 km/h certificate - Custom tarpaulin construction - Registration of your new trailer with the road traffic authority

Condition: new, 9932455 Böckmann Three-Way Tipper - ECO - Special Edition - No hidden costs with us! Freight and vehicle registration documents are included in the sale price! - Manufacturer: Böckmann Model: DK-AL 3218/27 P Eco Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 2,700 kg Unladen weight: approx. 935 kg Payload: approx. 1,765 kg (Payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for electric pump, can attach anywhere on the frame Emergency battery disconnect switch ALKO heavy-duty automatic jockey wheel Aluminium side boards Removable steel corner stanchions Removable side boards Foldable front panel enables transport of longer materials Rear drop tailgate Integrated ramp storage compartment at rear Integrated securing rail for attaching loading ramps at the rear Welded and hot-dip galvanized chassis and tipping platform provide enhanced stability, torsional rigidity, and tipping resistance 6 robust, rattle-free lashing rings in the side panel (500 kg pull force) Integrated holes in the side frame profile for easy retrofitting of additional lashing points 14" tyres ensure high ground clearance Safety support for securing tipping platform during maintenance Robust over-centre catches on the side boards Plastic mudguards, rear with mud flaps Shape-retaining combi floor - one-piece phenolic plywood reinforced with galvanized steel plate for high point loads and impact resistance Front position marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for the battery and electronics in a splash-proof box Hydraulic hoses safely routed within the longitudinal frame Vehicle registration documents included Optional extras and accessories available for this trailer: Ramp storage including aluminium loading ramps Crank supports Battery charger for tipper with electric pump and adapter Mesh sides (600 mm or 1000 mm) Side wall extension Load securing net Net hooks mounted around the side board Additional 350 mm side wall extension Tool box or storage box mounted on front wall or under the bed Flat tarpaulin in various colours Shock absorbers including 100 km/h type approval Custom tarpaulin structure Registration of your new trailer at the vehicle registration office Lajdpfxey I Nxfe Afksd We are happy to advise you on convenient monthly financing options and will provide you with a customised financing offer. With over 2,000 trailers in stock at all times, you will find a large selection of our trailers online. Alternatively, visit us in Horn-Bad Meinberg – we look forward to seeing you! Images may show optional accessories not included in the standard delivery. Due to constant product development, illustrations and technical data may be subject to minor changes. Errors and modifications reserved!

Condition: new, Böckmann Three-Way Tipper No hidden charges with us! Freight and vehicle documents are included in the sale price! Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 350 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (payload may vary depending on equipment and build) Electric hydraulic pump with battery (12 V/88H) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump can be attached anywhere on the frame Emergency battery disconnect switch ALKO heavy-duty automatic jockey wheel Aluminum side walls Removable steel corner stakes Removable side walls Drop-down front panel for transporting longer materials Rear tailgate with pendulum action Integrated access ramp flap at the rear Integrated securing rail for mounting ramps at the rear Welded and hot-dip galvanized frame and tipping platform ensure increased stability as well as torsional and tipping rigidity 4 sturdy, rattle-free lashing rings (pulling force 500 kg) (differs from images) Integrated holes in the side frame profile for easy retrofitting of additional lashing rings 14-inch tires provide high ground clearance Safety support for securing the tipper body during maintenance Robust cam locks on the side walls Plastic mudguards, rear with mud flaps Lsdpfx Asy I Ndbsfkjad Form-stable combination floor – continuous phenolic-coated plywood reinforced with galvanized steel for high point loads and impact resistance Front position marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for the battery and all electronics in a splash-proof box Hydraulic hoses securely routed in the longitudinal member Including vehicle documents Possible additional options and accessories for this trailer: - Ramp compartments including aluminum loading ramps - Crank supports - Charger for tipper with electric pump and adapter - Mesh headboard extension (600 mm or 1000 mm) - Side wall extension - Load securing net - Continuous net hooks mounted on the side rails - Additional 350 mm side wall extension - Tool box or storage box mounted on the front wall or under the loading bed - Flat tarpaulin in various colors - Shock absorbers incl. 100 km/h certificate - Custom curtain structure - Registration of your new trailer with the vehicle licensing office

Condition: new, Special Offer!!! Böckmann Three-way Tipper with Mesh Side Extensions and Load Securing Net Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 950 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Magnetic cable remote control with flexible spiral cable for the electric pump, can be attached anywhere on the frame Emergency stop battery disconnect switch ALKO heavy-duty automatic jockey wheel Aluminium side panels Removable steel corner stanchions Removable side panels Fold-down front wall allows transport of longer materials Rear swing tailgate Mesh side extension 600 mm Green load securing net Integrated rear ramp access hatch Integrated securing bar for attaching ramps at the rear Welded and hot-dip galvanized frame and tipping body construction for increased stability, torsional rigidity, and tipping resistance 4 sturdy, rattle-free lashing rings (pulling force 500 kg each) (contrary to the images) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes 14" tires for increased ground clearance Safety support for securing the tipper body during maintenance Robust lever locks on the side panels Plastic mudguards at the rear including mud flaps Dimensionally stable combination floor - continuous phenolic plywood reinforced with galvanized steel for high point loads and impact resistance Front position marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for battery and complete electronics in a splash-proof box Hydraulic hoses safely routed within the longitudinal member Includes vehicle documents. No hidden costs with us! Freight and vehicle documents are included in the sale price! Possible additional options and accessories for this trailer: Ramp channels incl. aluminum loading ramps Crank supports Charger for tippers with electric pump and adapter Side extension Lsdpsy I I Tbofx Afksad Net hooks continuously mounted along the side panel Additional side extension 350 mm Toolbox or storage box mounted on the front wall or under the load bed Flat cover in various colours Shock absorbers incl. 100 km/h approval Custom tarpaulin superstructure Registration of your new trailer at the road traffic authority

Condition: new, Three-way tipper with electric pump Lajdpfxey I I Ilj Afkjd Manufacturer: Böckmann Model: DK-AL 3218/30 Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Gross vehicle weight rating: 3000 kg Unladen weight approx. 957 kg Payload approx. 2043 kg (Payload may vary depending on equipment and configuration) 14-inch tyres Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Automatic jockey wheel Removable steel corner stanchions Removable side panels Swing tailgate 8 heavy-duty, rattle-free lashing rings Safety support for securing the tipping platform during maintenance Robust clamping lever locks on the side panels Plastic mudguards at rear incl. splash guards Durable phenolic plywood floor with galvanized steel bottom plate for high point loads 2 large wheel chocks Front position lights Fold-down front wall for transporting longer materials V-drawbar Strong mesh hooks mounted under the loading bed on the sides Incl. vehicle documents Optional extras and accessories for this trailer: - Shock absorbers including 100 km/h type approval - Three-sided swing leaf mesh extension, 600 mm - Mesh hooks all-around mounted on the side panels - Additional 350 mm side wall extension - Aluminum loading ramps, 2.7 t load capacity - Toolbox mounted on front wall or under loading platform - Load securing net - Flat tarpaulin in various colors - Registration of your new trailer at the vehicle registration office

Condition: new, Special price – Stock unit from 2022 – No initial registration! Böckmann Three-way Tipper with Electric Pump and Steel Drop Sides Manufacturer: Böckmann Model: DK-ST 3218/30 P Internal Dimensions: 3240 x 1800 x 400 mm (L.W.H.) Perm. total weight: 3,000 kg Unladen weight approx. 1,055 kg Payload approx. 1,945 kg (Payload value may vary depending on equipment and construction) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Cable remote control for electric pump Charging interface for battery incl. cable 14-inch tyres Automatic jockey wheel (please note: the heavy-duty automatic jockey wheel shown in the pictures is only installed on the 3.5 t version) Extra-heavy-duty hot-dip galvanized steel sidewalls 400 mm Removable steel corner stanchions Removable drop sides Track channel in the upper frame (easy retrofitting of loading ramps) Rear swing tailgate 4 stable, rattle-free lashing brackets Safety support for securing the tipper body during maintenance Folding front panel enables transport of long materials Robust angle lever locks on the sidewalls Plastic mudguards at the rear incl. mud flaps Stable phenolic plywood floor with galvanized steel plating for high point loads 2 large wheel chocks Front position lights V-drawbar Robust net hooks on the sides underneath the load area Incl. vehicle documentation Possible additional options and accessories for this trailer: Ljdpsy I E R Refx Afkead Shock absorbers incl. 100 km/h road approval Mesh side extension, 3-sided, swingable, 600 mm Net hooks fitted all around on the sideboards Additional sidewall extension 350 mm Aluminium loading ramps with 2.7 t load capacity Toolbox mounted to the front panel or under the load deck Load securing net Flat tarpaulin in various colors

Condition: new, Three-way tipper with electric pump and mesh side extensions 600 mm Manufacturer: Böckmann Model: DK-AL 3218/35 Internal dimensions: approx. 3240 x 1800 x 950 mm (LxWxH) Gross vehicle weight: 3500 kg Unladen weight: approx. 1118 kg Payload: approx. 1382 kg (payload may vary depending on equipment and configuration) Tyres: 14 inch Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Leaf mesh extension, three-sided, foldable, 600 mm Load securing net Automatic jockey wheel Removable steel corner posts Removable side panels Drop tailgate 4 robust, rattle-free lashing eyes Safety support strut for securing tipper body during maintenance Robust angle lever locks on side panels Laodpfey I Eqdox Afked Rear plastic mudguards incl. mud flaps Heavy-duty anti-slip phenolic floor with galvanized steel plate for high point load 2 large wheel chocks Front marker lights Folding front panel for transporting longer materials V-drawbar Sturdy mesh hooks mounted laterally beneath the loading area Incl. vehicle documents Available options and accessories for this trailer: Shock absorbers incl. 100 km/h road approval Mesh hooks all-round, mounted on side panel Additional side wall extension 350 mm Aluminium loading ramps, 2.7 t load capacity Toolbox mounted on front panel or beneath loading area Flat tarp in various colours Registration of your new trailer at the vehicle licensing office

Condition: new, Three-way tipper with electric pump Manufacturer: Böckmann Model: DK-AL 3218/30 P Internal dimensions: 3240 x 1800 x 350 mm (L x W x H) Permissible total weight: 3,000 kg Unladen weight approx. 957 kg Payload approx. 2,043 kg (payload may vary depending on equipment and configuration) Tyres: 13-inch Electric hydraulic pump with battery (12 V/88 Ah) and emergency hand pump Automatic jockey wheel Removable steel corner posts Removable side panels Swing tailgate 8 robust, rattle-free lashing rings Safety support for securing the tipping body during maintenance Robust cam locks on the side panels Plastic rear mudguards incl. mud flaps Durable phenolic resin-coated floor with galvanized steel sheet for high point load resistance 2 large wheel chocks Lodsy I Em Sepfx Afkjad Front marker lights Drop-down front wall for transporting longer items V-drawbar Robust net hooks mounted laterally under the loading bed Vehicle documentation included Available additional options and accessories for this trailer: Shock absorbers incl. 100 km/h road approval Three-sided swinging mesh extension, 600 mm high All-round net hooks mounted on the side panels Additional 350 mm side panel extension Aluminum loading ramps, 2.7 t load capacity Toolbox mounted on front wall or under the loading area Load securing net Flat tarpaulin in various colors Registration of your new trailer with the road traffic authority

Condition: new, Three-way tipper with electric pump and 600 mm steel side extension Manufacturer: Böckmann Type: DK-AL 3218/35 P Internal dimensions: approx. 3240 x 1800 x 950 mm (LxWxH) Gross vehicle weight: 3500 kg Unladen weight: approx. 1118 kg Payload: approx. 2339 kg (payload may vary depending on equipment and configuration) Tyres: 14 inch Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump 600 mm steel drop sides, foldable on three sides Load securing net Automatic jockey wheel Removable steel corner posts Removable side walls Swing tailgate 4 robust, rattle-free lashing rings Safety support for securing the tipper body during maintenance Heavy-duty angle lever latches on sideboards Plastic rear mudguards incl. mudflaps Durable anti-slip plywood floor panel with galvanized steel sheet floor for high point loads Lodpsy I Efbefx Afkead 2 large wheel chocks Front marker lights Front wall can be folded down for transporting longer materials V-drawbar Sturdy net hooks mounted laterally under the loading platform Incl. vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h approval Net hooks mounted continuously around the side walls Additional side wall extension 350 mm Aluminium loading ramps, 2.7 t load capacity Toolbox mounted on front wall or under loading area Flat tarpaulin in different colors Registration of your new trailer at the vehicle registration office

Condition: new, Special Offer!!! Böckmann Three-Way Tipper with Steel Mesh Extension and Load Securing Net Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 950 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (payload may vary depending on equipment and configuration) Electric hydraulic pump with 12 V/88 Ah battery and emergency manual pump Magnetic cable remote control with flexible coiled cable for the electric pump, attaches anywhere on the frame Emergency stop battery disconnect switch ALKO heavy-duty automatic jockey wheel Aluminum sideboards Removable steel corner posts Detachable sideboards Fold-down front wall enables transport of longer materials Pendulum tailgate Ledey I D Iuepfx Afkjad Mesh extension 600 mm Green load securing net Integrated ramp access flap at the rear Integrated securing bar for attaching loading ramps at the rear Welded and hot-dip galvanized frame and tipping bridge construction for enhanced stability, torsional rigidity, and tipping resistance 4 robust, rattle-free lashing rings (500 kg load capacity each) (contrary to the pictures) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes 14" tires ensure high ground clearance Safety support strut to secure the tipper body during maintenance Heavy-duty lever locks on the sideboards Plastic mudguards at the rear, including mud flaps Dimensionally stable combi-floor – continuous phenolic plywood reinforced with galvanized steel sheet for high point load capacity and shock resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for the battery and all electronics in a splash-proof box Hydraulic hoses safely routed within the longitudinal frame Vehicle documents included Possible additional options and accessories for this trailer: - Ramp compartments including aluminum ramps - Crank supports - Charger for tipper with e-pump and adapter - Side wall extension - Mesh hooks mounted all around the sideboards - Additional 350 mm side wall extension - Toolbox or storage box mounted at the front wall or under the loading area - Flat tarpaulin in various colors - Shock absorbers incl. type approval for 100 km/h - Custom tarpaulin superstructure - Registration of your new trailer with the vehicle registration office

Condition: new, maximum load weight: 2,440 kg, overall weight: 3,500 kg, loading space length: 3,240 mm, loading space width: 1,800 mm, ANHÄNGERWIRTZ, your online pick-up market for new trailers, offers high-quality brand manufacturers! - Over 850 new trailers in stock - More than 130 used trailers continuously available Non-binding sample offer: Section: Three-way tippers for sale – only while stocks last! Böckmann Tipper DK AL 3218/35 Profi Electric + NHP 3500kg Three-way tipper DK-AL 3218/35 Profi E 324x180x35cm, 3500kg, ALKO tandem high loader V chassis, aluminum drop sides with corner lever latches, foldable and removable on all four sides, steel sheet floor, electro-hydraulic tipping with its own battery, emergency hand pump, emergency stop, 2+2 recessed DIN lashing rings (rattle-free), heavy-duty automatic jockey wheel.... 😊 NEW Sales around the clock via our online shop Telephone order hotline: MON. - 08:00 to 12:30 & 14:00 - 18:00 or 24/7 via our online shop trailershop Content and images are protected by copyright – logos are trademarked 04/26 Manufacturer: Böckmann Fahrzeugwerke GmbH Ljdpsy A S I Sefx Afkoad Item No.: 1141164 Hire purchase available Shipping type: Freight shipping

Condition: new, maximum load weight: 2,600 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,240 mm, loading space width: 1,800 mm, loading space height: 350 mm, Böckmann Three-way Tipper DK-AL 3218/35 Profi, electrically tiltable NEW – Made in Germany! ATTENTION: SPECIAL OFFER PRICE – Only while stocks last. The professional solution: The DK 3218/35 E offers you the proven Böckmann quality from the tipper range. The best and most robust on the market! * Electrically tiltable with emergency hand pump * Torsion-resistant, welded and hot-dip galvanized base frame with heavy-duty steel profile bridge * Heavy-duty V-drawbar * Heavy-duty jockey wheel * Maintenance-free rubber suspension axle with independent wheel suspension * Robust double-walled, anodized aluminium side panels (35 cm), folding down and removable on all four sides * Front side wall with rubber pad, large-dimension hydraulic telescopic cylinder with hand pump and electric pump * Reinforced steel sheet floor with sturdy, waterproof phenolic plywood overlay * 4 heavy-duty lashing rings with springs (no rattling noise) * Rubber pad between tipper body and frame * 13-pin plug * Incl. vehicle registration document and COC paper! Laedpfox T Sapox Afksd Available accessories: * Mesh extension (60 cm) available for an extra €1,189 incl. VAT * 100 km/h upgrade for €250 incl. VAT * Aluminium loading ramps (2,700 kg load capacity/pair) in compartments for €699 incl. VAT * Heavy-duty rear props (pair) for €250 incl. VAT * Swivel tailgate (see pictures) for a surcharge of €195 incl. VAT Attractive financing available upon request. Sales, consultation and pickup in Zell by appointment. Please note: Due to the current material shortages among suppliers, trailer, accessory and component prices may vary depending on additional material surcharges. Subject to prior sale and errors. Please request availability and final pricing. Always a large selection of new and used car trailers from Saris, Böckmann, Humbaur, Stema, Pongratz and WM-Meyer available immediately or at short notice. For home transport, we are happy to provide our transfer license plate for €20. Delivery within Germany available for an additional charge!

Condition: new, maximum load weight: 2,460 kg, overall weight: 3,500 kg, loading space length: 3,700 mm, loading space width: 1,800 mm, loading space height: 350 mm, Böckmann DK-AL 3718/35 P The DK-AL 3718/35 P three-way tippers are vehicles built to true professional standards, featuring top-tier equipment. They impress with a solid and robust design, an impressive tipping angle of 45°, and a recessed lashing bracket system. Mechanical sealing at the corner stanchions and on the 350 mm aluminium side panels ensures secure transport. The steel sheet flooring over a phenolic resin-coated plywood base and the cam lever locks make these tippers reliable daily companions. As standard, the DK-AL 3718/35 P are among the safest tippers on the market – equipped with electric hydraulics and an easy, CE-compliant emergency stop system. Floor: Steel sheet flooring Side panels: Front wall foldable Side panels: 350 mm aluminium panels, cam lever locks, with rear gate Attachments: Removable corner stanchions Lashing systems: 4 lashing brackets integrated in the side rail Tyres and wheels: 14" tyres, steel rims Jockey wheel: Heavy-duty automatic jockey wheel Hydraulic systems: Safety support Hydraulic systems: Electric hydraulic pump with battery (12 V/95Ah) and emergency hand pump Lasdpfsx Tb U Njx Afked Additional accessories are available and can be retrofitted. Trade-in and financing options available. Reasons to buy from us! - Comprehensive, high-quality consultation - Service, repair, and TÜV inspections - Instruction at collection - High-quality products - Pre-delivery inspection Anhänger Müller Elle 22 52224 Stolberg

Condition: new, empty load weight: 1,320 kg, maximum load weight: 2,180 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,140 mm, loading space width: 2,100 mm, loading space height: 350 mm, loading space volume: 3 m³, suspension: other, tire size: 185r14c, wheelbase: 990 mm, color: silver, Year of construction: 2024, Equipment: trailer coupling, uploader, Three-way tipper Böckmann DK-AL 4121/35 PT (20) - Three-axle - V-shaped drawbar with automatic jockey wheel - Aluminum side walls, new profile - Electrically-hydraulically tilting platform Lodpfxjhuqn Es Afkead - Tipping angle 45° - 8 lashing eyes recessed in the side frame - Steel sheet floor - 4 lashing eyes in the side wall - Rail mounting prepared - 13-pole electrical system - Many additional options available

Condition: new, empty load weight: 900 kg, maximum load weight: 2,600 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,240 mm, loading space width: 1,800 mm, loading space height: 350 mm, loading space volume: 2.1 m³, suspension: other, tire size: 185r14c, wheelbase: 990 mm, color: silver, Year of construction: 2024, Equipment: trailer coupling, uploader, Böckmann three-way tipper, 3240 x 1800 x 350 mm, permissible total weight 3500 kg, rail mounting already installed, aluminum sideboards, steel sheet floor panel screwed onto a perforated floor, 4 recessed lashing eyes, electro-hydraulically tippable with emergency hand pump. Delivery time: In stock. Plus freight and administrative costs. Ledpfsfdfl Rsx Afkead

Condition: used, 9935768 Used Böckmann Big Champion R WCF with foal gate Manufacturer: Böckmann Type: Big Champion R WCF with foal gate Interior dimensions: 3415 x 1750 x 2300 mm L.W.H. Permissible total weight: 2400 kg Unladen weight: 1200 kg Payload: 1200 kg (payload specifications may vary depending on equipment and design) First registration: 06/08/2015 Polyester roof and polyester front panel in anthracite metallic WCF chassis (World-Class chassis) with independent wheel suspension for unique driving characteristics Original Böckmann full aluminum floor Spacious tack room with two pull-out saddle holders Tack room equipped with: shovel and broom, bridle holder, various hooks, storage compartment, cargo net, mirror and lead for hanging blankets Low loading height Wheel shock absorbers incl. 100 km/h approval Rubber on loading flap with integrated steps and side stops ensure optimal grip for your horses Lateral step protection made of high-strength plastic Side padding on both sides Automatic jockey wheel with smooth-running crank MSS safety box bar system Box bars adjustable in height at the front and rear Additional padding for box bars at the front Cover lift with integrated ventilation net protects against rain and cold in the closed state and allows air to enter Opening front windows ensure an optimal room climate Rubber floor with non-slip textile structure for a secure footing for the horses Plenty of space for the tail due to the large distance between the box bar and the rear door Sufficient space for tacking up between the tack room and the box bars Mud flaps Outline lights Maneuvering handle at the front Rear door with lifting aid for particularly easy lifting and lowering LED interior lights in the horse area (optional white or calming blue light with switch) Lighting system with reversing light and 13-pin connector PVC clear partition (adjustable and can also be completely removed) Horse head design on the rear door Workshop inspected New TÜV inspection available upon request Lsdozlvi Ajpfx Afkjad Possible additional options and accessories for this trailer: Aluminum rims Video surveillance including reversing camera Saddle rack on the side Folding foal gate Approach mirror Spare wheel * Folding step at the rear door

Condition: used, 9935980 Used 2-horse trailer with tack room Manufacturer: Böckmann Model: Duo Esprit SK Date of first registration: 10/06/2017 Permissible total weight: 2000 kg Unladen weight: approx. 856 kg Payload: approx. 1144 kg (payload specifications may vary depending on equipment and design) Body color: gray Polyester roof: silver Tack room equipped with extendable saddle rack, mirror and net Bilateral kick protection on the side walls inside Rubber floor glued and sealed Rubber on the ramp with integrated treads Canvas lift Wheel shock absorbers New tires Ball hitch renewed Laodpfx Afszk Sgbekjd Workshop inspected * New TÜV inspection available upon request