Used Meiller Tipper Semitrailers for sale (164)

Condition: used, axle configuration: 3 axles, first registration: 12/1999, loading space length: 7,200 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, Year of construction: 1999, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 5.990 kg Carrying capacity: 29.010 kg GVW: 35.000 kg Laodpfx Agoxt S T Tjqsg Tyre tread remainder on axle rear: 60% Purchase on credit is possible: Yes

Condition: used, mileage: 1,001 km, first registration: 01/2007, overall weight: 4,500 kg, color: red, driver cabin: other, gearing type: other, loading space length: 3,600 mm, loading space width: 2,320 mm, loading space height: 400 mm, Year of construction: 2007, Vehicle location: Bovenden, steel body, lashing eyes, pendulum flaps Ledsvhmyujpfx Agqsag Body: Meiller 3-sided tipper body The body comes from a Mitsubishi Fuso from 2009 with water damage! Further spare parts from the vehicle can be purchased by arrangement & for an additional charge! ACCESSORY INFORMATION WITHOUT WARRANTY, changes, prior sale and errors excepted! - .

Condition: used, maximum load weight: 13,220 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2014, loading space length: 4,950 mm, loading space width: 2,380 mm, loading space height: 900 mm, * Meiller MZDA 18, 3-way tipper trailer with Bordmatik system * First registration: 2014 * Air suspension Ledpoznq Huefx Agqeag * Drum brakes * BPW ECO PLUS axles * Tare weight: 4,780 kg * Payload: 13,220 kg * Body dimensions: 4.95 x 2.38 x 0.90

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: blue, driver cabin: other, gearing type: other, loading space length: 5,200 mm, loading space width: 2,300 mm, loading space height: 1,300 mm, Year of construction: 2006, Vehicle location: Bovenden, steel body, side-mounted control system on the left. Body: Side-mounted control system on the left, space for a loading crane at the rear – Meiller 2-S body. Matching cranes in stock. Additional cost for, e.g., an L-crane: 8,000 - 20,000 euros!! Dismounted from a MAN 26.430 6x6 with a 3900mm wheelbase. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Lodpji Rrm Asfx Agqoag

Condition: used, maximum load weight: 13,260 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2016, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, loading space volume: 11 m³, Equipment: ABS, * Drum brakes * ABS * Air suspension * EBS * Support legs * Roller shutter * BPW axles All information is provided without warranty / subject to prior sale. Ljdpjz Am A Ujfx Agqeag

Condition: new, color: black, driver cabin: other, gearing type: other, loading space volume: 14 m³, loading space length: 5,300 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, Vehicle location: Bovenden, chute, swinging flaps Superstructure: Meiller 3-way tipper body with aluminium side boards and chute, approx. 14 m³, spring flap support on the left, year of manufacture 2016! Auxiliary frame width approx. 890 mm at the front and approx. 770 mm at the rear! Laodoy Ua Aujpfx Agqsg Dismantled from a Daimler demonstration vehicle! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 1,001 km, first registration: 01/2012, color: silver, driver cabin: other, gearing type: other, loading space length: 6,200 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2012, Vehicle location: Bovenden, steel body. Body: Tipper bridge for a 4-axle chassis, WITHOUT FRAME AND HYDRAULIC SUPPORTS! Like-new condition of a D-Benz Arocs (demonstration vehicle). Auxiliary frame and hydraulic supports available for an additional charge of 4,500 EUR. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale, and errors. Lasdpfsi Rlgxex Agqeg

Condition: used, maximum load weight: 13,470 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 4,800 mm, loading space width: 2,450 mm, total width: 2,500 mm, Gross weight: 18,000 kg Unladen weight: 4,530 kg Payload: 13,470 kg Overall length: 7,200 mm Loading length: approx. 4,800 mm Width: 2,500 mm Additional information - BPW axles - Tyres 385/65R22.5 - Central locking - LED reversing lights - Support leg Laedoyw Eqcopfx Agqeg - Air suspension

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Equipment: Auxiliary frame, type 20N4, with outriggers, available in quantities of 4. Auxiliary frame, type 20N4, Meiller No. 1102 1002 571, for Actros 32/K, wheelbase 4200 mm. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Lajdpfx Aei Rp Tksgqog

Condition: new, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Equipment: ABS, with roll tarp rear wall with cam lock swinging and foldable left side wall with spring relief swinging right side wall swinging rear wall floor: 5 mm HBW 450 (Hardox® 450 or comparable material) BPW axles disc brakes for rim size 22.5" offset ET120 air suspension tipper color: pure white RAL 9010 top-of-the-line equipment Ledpfjy Ngwzox Agqjag rent, buy, lease-to-own rent from 540 euros net per month with full service (rental prices vary depending on the term) all information can be found at / Lease-to-own example: 560 euros net per month for a term of 48 months, with a down payment of 7500 euros net and a final payment of 5000 euros net all information is net, plus VAT, and subject to a positive credit check New in stock special price with cover disc brake air suspension many extras

Condition: used, mileage: 1,001 km, first registration: 01/2007, overall weight: 15,600 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 6,200 mm, loading space width: 2,320 mm, loading space height: 1,000 mm, Year of construction: 2007, Vehicle location: Bovenden, Construction: Meiller 3-way tipping body with on-board control on the left Dismantling of Iveco-Magirus Trakker AD410T45W 8x8 with 4750mm wheelbase! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! - . Ljdpfxovvbpto Agqeag

Condition: used, maximum load weight: 12,960 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2008, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, loading space volume: 11 m³, Equipment: ABS, * Drum brakes * Aluminum rims * ABS * Air suspension * 1 x storage compartment * Support legs * BPW axles Laodpszu D R Tsfx Agqsg All information is subject to change without notice / subject to prior sale.

Condition: used, mileage: 1,001 km, color: green, driver cabin: other, gearing type: other, loading space length: 4,800 mm, loading space width: 2,420 mm, loading space height: 600 mm, Vehicle location: Bovenden, steel body Body: 2-sided tipper body with space for crane mounting. Crane frame approx. 950 mm, front wall approx. 1800 mm, front frame width 760 mm. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Lsdpfx Agoi Rm H Djqoag

Condition: used, maximum load weight: 14,680 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2007, next inspection (TÜV): 09/2026, loading space length: 6,750 mm, loading space width: 1,750 mm, total width: 2,510 mm, Equipment: ABS, HKM Meiller Skip Loader Trailer A 18 ZB 5.0, Low-bed design / Drum brakes / Leaf spring suspension / Galvanized frame Drawbar lowering device, pneumatically lowerable drawbar 2-AXLE skip loader trailer – Suitable for carrying a maximum of 2 x 10 m³ skip containers according to DIN 30720 ---- Permissible total weight: 18,000 kg, Weight: 3,320 kg, Payload: 14,680 kg, Axles: 2, BPW eco Bergische axles, Wabco braking system, Leaf spring suspension, Drum brakes, Galvanized frame, Drawbar lowering device, pneumatic (type-approved, pneumatically lowerable drawbar), Splash guards on all axles, Underrun protection on the side, right and left, Underrun protection at the rear, ALB (Automatic Load Balancing), ABS, Air connection coupling head (red + yellow), 1x 15-pole connection plug, 1x storage compartment on the right, 2x rubber bumper at the rear, Loading area L x W: approx. 6,750 x 1,750 mm, Container support height (in driving position) unladen: approx. 1,130 mm, External dimensions L x W: approx. 9,670 x 2,510 mm, Length without drawbar / drawbar coupling: approx. 7,450 mm, Drawbar eye 40 mm, Spare wheel holder incl. spare wheel, Wheelbase: 4,950 mm, Tires: 265/70R19.5 on steel rims, Tread depth tire front left outside: 7 mm, Tread depth tire front left inside: 9 mm, Tread depth tire rear left outside: 8 mm, Tread depth tire rear left inside: 9 mm, Tread depth tire front right outside: 8 mm, Tread depth tire front right inside: 9 mm, Tread depth tire rear right outside: 8 mm, Tread depth tire rear right inside: 9 mm Additional equipment: Axles: 2 single axles in low-bed design for ABS, max. load capacity 18,000 kg, Spring center distance 1100 mm, Track width 1930 mm, with membrane brake cylinders, S-cam brake and AGS (Automatic Gain Stabilization), closed brake drums (size 360 x 200 mm), asbestos-free brake linings, maintenance-free hubs, bolts for center positioning, automatic linkage adjusters Wheels: Steel disc wheels in twin configuration Suspension: maintenance-free mounted three-leaf parabolic suspension (11 t per axle) with linear characteristic and friction amplification Chassis: Steel design with two longitudinal beams, Upper side designed as a container support surface in wear-resistant design, with lateral impact protection, turntable with ball bearing, low maintenance, type-approved, pneumatically lowerable drawbar (for front loading and unloading), container stops, lashing bars, plastic fenders, plastic toolbox, 1 chock with holder, connection cable to the towing vehicle Ljdpfezpgizsx Agqjag Braking system: Compressed air, two-line, all-wheel brake according to EG, 2 ALB regulators, 1 release valve, with ABS braking system, brake lines made of PVC material, spring parking brake Electrical system: 24 Volt, according to StVZO (German Road Vehicle Registration Regulations), Multi-chamber lights, Outline and license plate light Underrun protection: In rigid design Painting: Hot-dip galvanized

Condition: used, New: Yes Dimensions of cargo space: 580 x 230 x 150 cm Cargo space capacity: 20.000 l Ljdpfx Agezatqzsqoag

Condition: used, mileage: 1,001 km, first registration: 01/2024, color: white, driver cabin: other, gearing type: other, loading space length: 4,700 mm, loading space width: 2,410 mm, loading space height: 600 mm, Year of construction: 2024, Vehicle location: Bovenden, steel body, lashing eyes, swing tailgates Body: Meiller 3-way tipping body with spring-assisted tailgates and pneumatic tailgate release. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Lasdpfjwkiw Tjx Agqsg - .

Condition: used, mileage: 1,001 km, first registration: 01/2018, color: red, driver cabin: other, gearing type: other, loading space volume: 18 m³, loading space length: 6,150 mm, loading space width: 2,300 mm, loading space height: 1,300 mm, Year of construction: 2018, Vehicle location: Bovenden, Body: Meiller halfpipe steel body 16,5/18 m³ floor 6 mm, side walls 5 mm in VS 120 ( HB 450), dismantling from MAN TGS 41.500 8X8 BB with 4800mm wheelbase & only 54.000km! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Laedpfxjvi Ig Eo Agqjg - .

Condition: used, mileage: 1,001 km, first registration: 01/2011, empty load weight: 3,000 kg, maximum load weight: 27,000 kg, overall weight: 30,000 kg, color: grey, driver cabin: other, gearing type: other, loading space length: 6,500 mm, Year of construction: 2011, Vehicle location: Bovenden, container locking Lodpfxsy Nd Nus Agqsag Body: 30t roll-off system Meiller RK 30.62 K for containers up to 6.5 m (up to 6,500 mm container length), hydraulic axle support, aluminium chequer plate mudguards, new and used containers available, as well as hydraulic pump at extra cost. ACCESSORY DETAILS WITHOUT WARRANTY; subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, * Color of the tipper body: 2011 Deep Orange * 9 t each (technical axle load) * Drum brake, size 420 x 180 mm, with asbestos-free brake linings and enclosed brake drum * Offset ET0 (S-hub) * Standard wheel bolts * Electronically controlled two-circuit pneumatic brake system (EBS E+RSS) according to EC with automatic load-dependent brake valve (ALB), spring accumulator cylinder, and two non-interchangeable coupling heads * ABS 2S/2M (Wabco), with connection lines * Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be disabled for concrete mixers * Tires 385/65 R 22.5, tread pattern S * Painted steel rims * Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141 * 1/2 shell fenders with splash guard mat Laodpfxezu D R Hs Agqsg * Plastic fenders * Rigid underrun protection according to ECE R-58 (R58-03) * Floor 5 mm HBW 450 (Hardox 450 or comparable material) * Front wall 3 mm BS 70 * Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Swinging and folding left side wall with spring relief * Swinging right side wall * Spring relief on the left side wall * Swinging rear wall * Rear wall with cam lock * Fixed rear corner posts * Fixed left front corner post * 150 mm long, fixed, straight discharge chute * Safety support for the tipper body * Metering device using chains * Access ladder on the left side of the front wall * Without tow hitch * Two non-interchangeable coupling heads with integrated line filters * Aluminum air reservoir * 7-pole ABS connection cable for EBS brake system * 1 x 15-pole front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098 * 1 x 15-pole electrical connection cable (Wendelflex) * Hydraulic oil filling with HLPD-22 mineral oil Note: not in conjunction with kit delivery * Painting of the chassis frame (main frame, axle supports and underrun protection - excluding attachments) in standard colors (all colors except metallic and special colors) * Color chassis frame: Black * Painting of the tipper body in a standard color * Tipper body color * Individual inspection (e.g. TÜV or Dekra) or Certificate of Conformity (COC) * Contouring marking according to EC: white on the sides, yellow on the rear * Manufacturer's certificate * COC Note: The COC is not yet available for all MEILLER products * 1 year warranty period excluding the necessary annual inspections (UVV inspections) * 24-volt five-chamber lights with integrated triangular reflectors according to ECE-R 48 incl. lamp protection * MEILLER standard axles (SAF or BPW) * Floor-level, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor Note: For retrofitted access steps, the requirements of Annex 2 of the DGUV Regulation 70 # Vehicles must be observed * PREVANTEC S package consisting of a swinging and folding left side wall and floor-level, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor according to DIN EN 12640 Note: For retrofitted access steps, the requirements of Annex 2 of the DGUV Regulation 70 # Vehicles must be observed. * Tipper body width 2,380 mm All information is subject to change without notice.

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: orange, driver cabin: other, gearing type: other, loading space length: 4,700 mm, loading space width: 2,300 mm, loading space height: 1,000 mm, Year of construction: 2000, Vehicle location: Bovenden, steel superstructure, pendulum flaps Body: 3-sided tipper body Dismantling of Daimler-Benz Actros 2640 6x4 with 3300mm wheelbase! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lasdpeu T Ih Ejfx Agqeg

Year of construction: 2025, condition: used, Meiller Trigenius three-way tipper Year of manufacture: 2025 Suitable for 4-axle chassis Three-way tipping function Hydraulic roll cover Laedpfjzixi Hox Agqjg Automatic side gate opening (side gate system) High-strength steel construction High side walls Lashing and securing devices Immediately available Technical data Manufacturer: F.X. Meiller Type: DZ 21 Trigenius Year of manufacture: 2025 Max. operating pressure: 275 bar Max. payload: 21,000 kg Suitable for 4-axle trucks Price: €29,900 net (export), incl. +19% VAT All information without guarantee, errors and omissions excepted. = Further information = Year of manufacture: 2025 New: No Length: 570 cm Warranty: Cargo area length 5.70 m Meiller Trigenius three-way tipper Year of manufacture: 2025 Suitable for 4-axle chassis Three-way tipping function Hydraulic roll cover Automatic side gate opening (side gate system) High-strength steel construction High side walls Lashing and securing devices Immediately available Technical data Manufacturer: F.X. Meiller Type: DZ 21 Trigenius Year of manufacture: 2025 Max. operating pressure: 275 bar Max. payload: 21,000 kg Suitable for 4-axle trucks Price: €29,900 net (export), incl. +19% VAT All information without guarantee, errors and omissions excepted.

Condition: used, empty load weight: 4,760 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2021, next inspection (TÜV): 01/2027, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: red, Equipment: ABS, EBS Drum brake Payload: 13,240 kg Steel side panels, left side: pivoting and foldable with lifting springs – right side: pivoting Tie-down rings SAF axles Lsdpfjzzc Epox Agqjag Alcoa aluminum rims Errors and omissions excepted.

Condition: used, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2026, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, * Color of the tipper body: 2011 Tieforange * 9 tons each (technical axle load) * Drum brake, size 420 x 180 mm, with asbestos-free brake linings and a closed brake drum * Offset ET0 (S-hub) * Standard wheel bolts * Electronically controlled two-circuit compressed air brake system (EBS E+RSS) according to EC with automatic load-dependent braking valve (ALB), spring brake cylinder, and two keyed coupling heads * ABS 2S/2M (Wabco), with connection lines * Electronically controlled air suspension (ECAS) with automatic quick lowering during the tipping process to increase stability; can be deactivated for concrete mixers * Tires 385/65 R 22.5, profile S * Painted steel rims * Tire pressure monitoring system (TPMS) according to EU Regulation UN ECE-R 141 * 1/2 shell fenders with splash protection mat * Plastic fenders * Fixed underrun protection according to ECE R-58 (R58-03) * Floor 5 mm HBW 450 (Hardox 450 or comparable material) * Front wall 3 mm BS 70 * Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Pivoting and folding left side wall with spring relief * Pivoting right side wall * Spring relief on the left side wall * Pivoting rear wall * Rear wall with cam lock * Fixed rear corner posts * Fixed left front corner post * 150 mm long, fixed, straight discharge chute * Safety support for the tipper body * Dosing device by means of chains * Access ladder on the left side of the front wall * Without trailer coupling * Two keyed coupling heads with integrated line filters * Aluminum air reservoir * 7-pole ABS connection cable for EBS brake system * 1 x 15-pole front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098 * 1 x 15-pole electrical connection cable (spiral flexible cable) * Hydraulic oil filling with HLPD-22 mineral oil Note: Not in conjunction with kit delivery * Painting of the chassis frame (main frame, axle supports, and underrun protection - excluding mounted parts) in standard colors (all colors except metallic and special colors) Lasdpezu D Rmofx Agqog * Color of chassis frame: Black * Painting of the entire tipper body in a standard color * Tipper body color * Individual approval (e.g., TÜV or Dekra) or Certificate of Conformity (COC) * Contour marking according to EC: white on the sides, yellow on the rear * Manufacturer's certificate * COC Note: The COC is not yet available for all MEILLER products * 1-year warranty period, excluding annual inspections (UVV tests) * 24-volt five-chamber lights with integrated triangular reflectors according to ECE-R 48, incl. lamp protection * MEILLER standard axles (SAF or BPW) * Flush-mounted, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor Note: For subsequently installed access platforms, the requirements according to Annex 2 of the DGUV Regulation 70 # Vehicles must be observed * PREVANTEC S package consisting of a pivoting and folding left side wall and flush-mounted, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor according to DIN EN 12640 Note: For subsequently installed access platforms, the requirements according to Annex 2 of the DGUV Regulati

Condition: used, mileage: 1,001 km, first registration: 01/2011, overall weight: 20,000 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2011, Vehicle location: Bovenden, Body: 20t Meiller RK 20.70 hooklift system for containers up to 7 m, removed from Actros 2551 L 6x2 with 4800 mm wheelbase! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Lodpfx Aoyf Nwbjgqeag

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Brakes: * Wabco TEBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums ----Axles: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Drawbar / Flange coupling: * Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle) ----Electrical system / Lighting: * Tire pressure monitoring system (TPMS) * 15-pole electrical connector * 5-chamber tail lights with protective cover ----General components: * Aluminum air reservoir * Welded box-type drawbar * Support jack at the front Ljdezd I Diepfx Agqeag * Underrun protection at the rear * Closed plastic individual fenders * Access ladder on the front left side, on the front panel ----Tipping body: * Steel 3-sided tipping body with M-Jet sideboards * Front panel made of 3 mm STEELECT 240 steel * Side walls with sturdy, continuous top rail inclined inwards * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls – without center rail * Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall * Left side wall pivots via manual central locking and can be folded down with sideboard spring lift * 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate * Manual metering device via chain * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roller cover: * Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel ----Painting: * Chassis painted in RAL 7021 black-gray * Painting of the sideboards in RAL 9006 white aluminum ----Information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available from approximately week 37/2026