Used Meusburger Lowbed Semitrailers for sale (58)

Condition: new, empty load weight: 8,950 kg, maximum load weight: 40,050 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,950 kg, Equipment: ABS, Chassis: -Sturdy steel frame welded construction with front frame cranking and flat loading area, rear taper approx. 500x100 mm -Frame neck 200 mm with beveled corners -Beveled end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of the rear taper) -2 king pin positions with interchangeable 2” king pin -Outer frame closed to the outside as a perforated outer frame for lashing with tie-down straps -Reinforced frame design / point load at center of gravity -Provisions for extendable widening of the loading area -With excavator recess, depth approx. 220 mm, width approx. 600 mm, starting approx. after the 2nd axle to the end of the vehicle -1 pair of wheel recesses in front of axle with steel covers -(Covers with Körapur coating), depth approx. 400 mm and 1 pair of wheel recesses between 1st and 2nd axle with steel covers -Underrun protection = extended end plate -Drop supports at the rear Djdpfswu Agiox Aqcsck Ramps: -2 single-piece aluminum loading ramps with spring assist -Length x width approx. 2,500 mm x 600 mm -Can be secured in transport position with tie-down straps -Laterally manually adjustable Floor: -35 mm larch wood floor with aluminum omega profiles Landing gears: -Mechanical 24 t landing gears with single-side operation and load compensation Axles, steering, and tires: -BPW air suspension axles, each 10 t axle load, air bag diameter 360 mm -S-cam brake 300/200 mm, asbestos-free brake linings -Automatic slack adjusters -Lift and lowering device with total lift approx. 200 mm -2nd driving position via ball valve +50 mm -1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via push button on the trailer -3rd axle as self-steering trailing axle with electric and mechanical lock -12 steel disc wheels, 10-hole, with center offset -12 tires 245/70 R 17.5 143/141J, tubeless -Incl. tire pressure monitoring Brake system: -Dual-line brake with EBS-E incl. RSS -EBS (WABCO 4S3M) -Spring-actuated parking brake -Air connection yellow / red Painting: -Steel grit cleaning, sprayed galvanizing of chassis and primer -Painting of chassis/wheel hubs/outer frame in DB 7350 Novagrau -Plastic parts black, unpainted -Rims: factory silver -Reflective strips on the sides and rear in yellow Accessories: -Side and rear plug-in side walls on gooseneck approx. 400 mm high -Spare wheel holder -Aluminum approach guard -4 wheel chocks -Steel fenders with Clear-Pass -Elongated license plate bracket in the end plate -1 removable ECE sign at rear -11 pairs ZK modules 10t on the side: -2x on gooseneck -9x on loading area -Without rear towing eyes -Extendable warning panels incl. 3 position lights each, at the front on the landing gears and at the rear before the end plate, infinitely extendable up to loading width 4,500 mm -4 plug-in mounts for warning panels in stake pockets on the loading area -6 pairs of side stake pockets for plug-in stakes 100x50 mm -2 rows of transverse stake pockets for plug-in stakes 100x50 mm on gooseneck from outer frame inward to main frame (1x in front of and 1x after king pin positions) -3 rows of transverse stake pockets for plug-in stakes 100x50 mm on the loading area from outer frame inward to main frame (1x at the front section, 1x before 1st axle, and 1x after 3rd axle) -2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container -Rubber apron mounted on underrun protection

Condition: new, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,550 mm, tire size: 235/75 R17.5, color: grey, operation weight: 11,000 kg, Equipment: ABS, Chassis: - Steel frame welded construction with front and rear frame extensions and a low-bed without a rear slope - Frame neck + kingpin plate 225 mm - Low-bed designed for a point load of 25 tons over 5 m - Outer frame closed on the outside with welded lashing rings for securing cargo - Interchangeable 2" kingpin - Rear mounting rail for aluminum ramps Axles and Tires: - BPW low-loader axles, 10 tons axle load each, air spring diameter 360 mm - Air suspension with lifting and lowering device, stroke 220 mm (-60/+160 mm) - Wabco SmartBoard with ECAS function for 2 coupling heights + 100 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - IVTM tire pressure monitoring system Dodpfx Aoiu Eu Nsqcjck - 9 tires 235/75 R 17.5, tubeless Steering: - 1st and 2nd axles hydraulically steered via the fifth wheel coupling Floor: - Multi-layer glued panel floor with a thickness of 27 mm, flush with the outer frame and longitudinal beams - Reinforced underneath with GRP coating - 12 pairs of lashing rings welded into the outer frame (8 pairs RUD 8 tons – 6 pairs in the low-bed and one pair each on the gooseneck and at the front of the rear section – 2 pairs of lashing rings 4 tons on the gooseneck and rear section) - 6 pairs of mushroom-shaped load securing points in the outer frame in the low-bed - Storage compartment with lid in the floor of the low-bed, front left and right Front Wall: - 25 mm aluminum hollow profiles extending up to the lower edge of the roof with integrated tarpaulin tensioning device Sliding Tarpaulins: - Sliding tarpaulins on both sides with welded vertical and horizontal straps (spacing approx. 600 mm) and stainless steel tensioning closures - Adjustable tarpaulin straps (over center) up to a loading width of 4,000 mm, including tarpaulin extension with snap buttons and Velcro - Tarpaulin extension in the direction of travel: 300 mm, in height: 750 mm - Incl. eyelets for a loose tarpaulin extension part - 1 pair of vertical tarpaulin pockets with a length of approx. 1,000 mm, position in the low-bed at the front extension - With strap pockets Rear Wall: - Steel rear portal frame with lateral tarpaulin mounting device - Aluminum double-wing door, 25 mm thick - Both door wings can be fully folded in with door latch - One aluminum double-hinge hinge and two recessed handle recesses per door wing Front Corner Posts: - At roof height, screwed on at the front end Intermediate Posts: - 3 pairs of steplessly adjustable folding posts - The posts can be moved along the entire length using roller carriages - Intermediate posts can also be fixed in the rear platform in the low-bed Roof: - EDSCHA sliding tarpaulin (galvanized) with crossmember that can be moved in both directions (pushed forward together in the loading area) - Rear portal crossbar can be swung out - PVC tarpaulin roof without customs closure - Manually hydraulic lifting roof on both sides, stroke 450 mm - Lifting roof can be operated in the front (9x50) and rear (9x50) elevated positions - Including tarpaulin extension and tarpaulin rail at the rear - Tarpaulin can be extended by 900 mm at the front end wall Accessories: - Extendable warning signs (removable at the rear and front with socket) incl. position lights up to a loading width of 4,000 mm - Storage of the 4 warning signs on the front wall, inside, top right and left - 1 aluminum ladder with bracket 2,500 mm long on the front wall - 2 rows of aluminum slats self-locking - Sheet metal mudguard

Condition: new, empty load weight: 8,490 kg, maximum load weight: 40,510 kg, overall weight: 49,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,550 mm, tire size: 245/70 R 17,5, color: grey, operation weight: 8,490 kg, Equipment: ABS, Chassis: - Sturdy welded steel frame construction with front frame kick-up and flat loading area with rear bevel approx. 500x100 mm - 200 mm gooseneck with chamfered corners - Sloped end of gooseneck approx. 500 x 100 mm (traction ribs on outer frame in the area of rear slope) - 2 king pin positions with interchangeable 2” king pin - Outer frame closed to the outside as perforated outer frame for lashing with tension straps - Reinforced frame design / concentrated load at center of gravity - Provisions for extendable widenings in the loading area - With excavator trough (without cover), approx. 220 mm deep, approx. 600 mm wide, starting approx. after 2nd axle up to end of vehicle - 1 pair of wheel recesses in front of axle with steel covers - (Covers with Körapur coating), approx. 400 mm deep, as well as 1 pair of wheel recesses between 1st and 2nd axle with steel covers - Underrun protection = extended rear closing plate - Drop-leg supports at rear Floor: - 35 mm larch wood floor with aluminium omega profiles Axles, Steering, and Tires: - BPW air suspension axles, 10 tons axle load each, bellows diameter 360 mm - S-cam brake 300/200 mm, asbestos-free brake linings - Automatic slack adjusters - Lifting and lowering device with total lift approx. 200 mm - 2nd ride height via ball valve +50mm - 1st axle as lift axle (wired via EBS), confirmation fully automatic with mechanical emergency activation via push button on trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-hole, with offset centered - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Brake System: - Two-line brake system with EBS-E including RSS - EBS (WABCO 4S3M) - Spring-actuated parking brake - Air connection yellow/red Paintwork: - Steel shot blasting, chassis spray-galvanized and primed - Paintwork chassis/wheel hubs/outer frame in DB 7350 Novagrey Accessories: - Removable side boards and rear wall on gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminium underrun protection - 4 wheel chocks - Sheet metal mudguards with Clear-Pass - Elongated license plate holder in closing plate - 1 plug-in ECE plate at the rear - 11 pairs ZK modules 10t, mounted laterally: - 2x on the gooseneck - 9x on the loading area - Without rear towing eyes - Extendable warning signs incl. 3 position lights each, mounted at the front on landing gear and at rear before closing plate, infinitely extendable up to a loading width of 4,500 mm - 4 plug-in holders for warning signs in stake pockets on the loading area - 6 pairs of lateral stake pockets for insertable stakes 100x50 mm - 2 rows of transverse stake pockets for insertable stakes 100x50 mm on gooseneck from outer frame to main frame (1x before and 1x after king pin positions) - 3 rows of transverse stake pockets for insertable stakes 100x50 mm on loading area from outer frame to main frame (1x front, 1x before 1st axle, 1x after 3rd axle) - 2 pairs of steel plates in the loading area with container locks for one 20ft container - Rubber skirt mounted on underrun protection - Preparation (=cable routing for NATO cable and hole pattern for subsequent installation of NATO socket at the front of the closing plate as well as holder on the vehicle) for later mounting of electrohydraulic unit on the right rear in direction of travel for potential operation of drive-on ramps Dcodpjwu A Slsfx Aqcek - Mechanical 24t landing gear with single-side operation and load compe

Condition: used, empty load weight: 8,900 kg, maximum load weight: 40,100 kg, overall weight: 49,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 9,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, color: grey, Year of construction: 2025, Equipment: ABS, With every used semi-trailer, you receive a current and complete inspection and functionality report. Chassis: - Robust welded steel frame construction with front frame drop and flat loading area, rear taper approx. 500x100 mm - Neck height 200 mm with front rounded corners - Sloped end of the gooseneck approx. 500 x 100 mm (traction ribs on outer frame in area of rear slope) - 2 kingpin positions with replaceable 2” kingpin - Outer frame closed outward as perforated outer frame - Loading area with extendable central frame, extendable by approx. 2,000 mm, lockable pneumatically in 500 mm increments - Frame before and after separation with 80x80 mm step - Reinforced frame design / point load supported in retracted position at center of gravity - Without extendable load width extensions, but prepared for retrofitting (= guide tubes welded into frame) - With excavator trough (without cover), depth approx. 220 mm, width approx. 600 mm, starting after 2nd axle to vehicle end - 1 pair of wheel recesses between 1st and 2nd axle, steel covers (covers with Körapur coating), depth approx. 400 mm - Underrun protection = extended end plate - Drop supports rear Floor: - 35 mm larch wood floor with aluminum omega profiles Axles, Steering, and Tyres: - BPW air suspension axles, each 10 t axle load, airbag diameter 360 mm - S-cam brakes 300/200 mm, asbestos-free brake linings Dcsdpeywv Ixofx Aqcsk - Automatic slack adjuster - Lifting and lowering device, total lift approx. 200 mm - 2nd driving position via ball valve +50 mm - 1st axle lift axle (wired via EBS), confirmation fully automatic with mechanical emergency actuation via button on the trailer - 3rd axle as friction-steered trailing axle with electric and mechanical lock - 12 steel disc wheels, 10-bolt, center offset - 12 tires 245/70 R 17.5 143/141J, tubeless - Including tire pressure monitoring Accessories: - Removable side and rear wall on the gooseneck, approx. 400 mm high - Spare wheel holder - Side aluminum underrun protection - 4 wheel chocks with holders - Elongated license plate holder in the end plate - 1 plug-in ECE sign at the rear - 11 pairs of ZK modules 10t on the side: - 2x on the gooseneck - 2x on the loading area before extension - 7x after extension - Without tow rings at the rear - Extendable warning boards incl. 3 position lamps each, at the front at the landing gears and at the rear in front of the end plate, infinitely extendable up to load width of 4,500 mm - 4 plug-in holders for warning boards in stake pockets on the loading area - 6 pairs of stake pockets on the side for insertable stakes 100x50 mm - 2 transverse rows of stake pockets for insertable stakes 100x50 mm on the gooseneck from outer frame to main frame (1x before and 1x after kingpin positions) - 3 transverse rows of stake pockets for insertable stakes 100x50 mm on the loading area from outer frame to main frame (1x before extension, 1x after extension, 1x after 3rd axle) - 2 pairs of steel plates in the loading area for container locks to accommodate 1x 20ft container - Rubber skirt mounted on underrun protection - Preparation (= cable routing of NATO cables and hole pattern for optional mounting of NATO socket at front on end plate as well as holder on vehicle) for optional future installation of an electro-hydraulic unit, right rear in direction of travel, for possible ramp operation The trailer is optionally available with aluminum loading ramps.

Condition: used, empty load weight: 12,450 kg, maximum load weight: 32,550 kg, overall weight: 45,000 kg, first registration: 11/2008, loading space length: 9,730 mm, loading space width: 2,550 mm, suspension: air, color: orange, operation weight: 12,450 kg, Very well-maintained, first-hand Meusburger MTS 3 - 45T Dcjdowb Sh Aspfx Aqcjk Triple-axle drive-over low-loader trailer with loading ramp Heavy-duty transport Type MTS 3 Gross weight -45,000 kg Payload -32,550 kg Length -13,900 mm Width -2,500 mm Air suspension

Condition: used, maximum load weight: 42,500 kg, overall weight: 60,000 kg, axle configuration: 3 axles, first registration: 06/2022, with 12 axles, hydraulically suspended and divided, with hydromechanical forced steering, rear taper and drive-on ramps STZ-L Gooseneck - Robust welded steel construction - Engineered loading platform 3,950 x 2,480 mm including rear taper - Hydromechanical forced steering (dual-circuit steering system) - Turntable-mounted fifth-wheel plate with interchangeable 2-inch or 3.5-inch kingpin and adjustable steering wedge - Fifth wheel load: 24 t - Rear max. steering radius: 2,600 mm Loading platform - Lowered outer sections 4,630 mm long, 420 mm deep, resulting in a loading height of 470 mm or 830 mm with floor inserts - Extendable by 2,053 mm - Includes aluminum bridging rails for creating level surfaces - Excavator boom trough at rear running gear: 4,900 mm long, 880 mm wide, 480 mm deep - Length of rear running gear: 4,900 mm incl. 500 mm rear taper, loading height 890 mm - One pair of wheel recesses in lower deck - 3-axle hydraulically suspended running gear - Split Gigant axles with 600 mm stroke Rear of vehicle - Tapered design, 500 mm - Rear hydraulic support Drive-on ramps - Two-part drive-on ramps, 2,850 + 1,850 mm long, 800 mm wide - Rubber-coated with climbing bars Braking system - Dual-line full air braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABS brake Special equipment Radio remote control for steering and ramp operation Central lubrication system Technical data Gooseneck Loading platform (LxW): 3,950 x 2,480 mm Loaded fifth wheel height: 1,300 mm Dcodpfx Ajw Etd Tsqcjk Loading platform Platform (LxW): 10,030 x 2,850 mm, extendable by 2,053 mm Lowered outer sections: 4,630 mm + 2,053 mm extension Center beam: 980 mm Excavator trough: 4,900 mm long, 880 mm wide, 480 mm deep Steering 1st to 3rd axle: hydromechanically forced steered (dual-circuit system)

Condition: used, maximum load weight: 26,520 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 08/2012, Year of construction: 2012, Equipment: ABS, Semi-trailer trailer Meusburger MPS-2 steered axles Crane Palfinger PK 26002 radio 4 extension incl. rotator, 4m 5500Kg 12m 1700Kg SZM MAN TGS 26.440 6X2 Euro5 eev Retarder, dual-circuit hydraulics Condition: very good, TÜV Dsdpfx Aorcz Izeqcjck Tires: 65-95%

Condition: ready for operation (used), functionality: fully functional, empty load weight: 8,380 kg, maximum load weight: 29,620 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 10/2007, Year of construction: 2007, Equipment: ABS, crane, tail-lift, Meusburger, MPS-2 with Palfinger 23002 crane The vehicle is operational and ready for use. Dodpfxjx Dy Igs Aqcsck The crane features radio control as well as a remote control unit. The semi-trailer is extendable and has 2 steerable axles. If you are interested, please email us or call. Alemi Trucks Gottfried Vajan Straße 7 2442 Unterwaltersdorf Austria T + 43 (German) M + 43 (German - English) E All information provided without guarantee!