Used Meiller Semitrailers for sale (162)

Condition: used, empty load weight: 4,800 kg, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2011, next inspection (TÜV): 02/2027, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 800 mm, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, steel body, side tipping mechanism on the left, 2 axles, tandem, air suspension, ABS (anti-lock braking system), underrun protection, front support. Body: Tandem 3-sided tipping trailer with side tipping mechanism on the left, 2 x 9-ton axles, drum brakes! All information is provided without guarantee as the trailer is currently en route! The trailer can be inspected at Robert-Bosch-Strasse 22, 72186 Empfingen! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Gjdpfjzna Sajx Anqeug

Condition: used, mileage: 1,001 km, first registration: 01/2024, color: white, driver cabin: other, gearing type: other, loading space length: 4,700 mm, loading space width: 2,410 mm, loading space height: 600 mm, Year of construction: 2024, Vehicle location: Bovenden, steel body, lashing eyes, swing tailgates Body: Meiller 3-way tipping body with spring-assisted tailgates and pneumatic tailgate release. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Gujdpfswkiw Tsx Anqog - .

Condition: used, New: Yes Dimensions of cargo space: 580 x 230 x 150 cm Cargo space capacity: 20.000 l Guedpezatqzofx Anqjg

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: black, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, Body: 19t Meiller RK 19.65 S roll-off system for containers up to 6.5m Dismantling of SCANIA 144L 460 6x2 with 4500mm wheelbase! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gjderyw Tbopfx Anqoug - .

Condition: used, axle configuration: 3 axles, first registration: 10/2007, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - EBS - Full trailer frame - Lifting axle = More information = Empty weight: 6.720 kg Carrying capacity: 28.280 kg GVW: 35.000 kg Tipper: Back Tyre tread remainder on axle rear: 60% Suspension on axle rear: air Chassis: steel Purchase on credit is possible: Yes Purchase by installments is possible: Yes Godpsxt Uhgjfx Anqjug

Condition: used, Year of construction: 1990, color: black, loading space volume: 10 m³, loading space width: 2,300 mm, loading space length: 3,600 mm, loading space height: 1,300 mm, mileage: 1,001 km, first registration: 01/1990, gearing type: other, driver cabin: other, Equipment: crane, Vehicle location: Bovenden, steel superstructure, pendulum flaps, crane at the rear, emergency stop, grab control, 2-point mechanical support, 2x hydraulic extensions, 1x mechanical extension Superstructure: Roll-off container approx. 10.7m³ with fold-down side walls & crane Hiab 071 AW B3 total length approx. 4800mm! Load diagram: 1.8m-3300kg, 3.6m-1860kg, 5.4m-1220kg, 6.9m-940kg, 1x mechanical up to 9m-540kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Godpfxevhh Sxs Anqoug - .

Condition: used, axle configuration: 2 axles, first registration: 07/2007, loading space volume: 24 m³, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - EBS - Sliding roof = More information = Gjdpfoxt R Ebjx Anqsug Empty weight: 5.620 kg Carrying capacity: 27.380 kg GVW: 33.000 kg Selling price: € 7.000, US$ 8.074 Tyre tread remainder on axle rear: 60% Suspension on axle rear: air Technical inspection expiration date: 2024 Purchase on credit is possible: Yes

Condition: used, axle configuration: 3 axles, first registration: 06/2008, loading space length: 7,200 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, loading space volume: 24 m³, color: blue, Year of construction: 2008, Equipment: ABS, Selling price: € 12.000, US$ 13.840 Godpfxsxt R Trj Anqoug Purchase on credit is possible: Yes

Condition: used, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2026, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, * Color of the tipper body: 2011 Tieforange * 9 tons each (technical axle load) * Drum brake, size 420 x 180 mm, with asbestos-free brake linings and a closed brake drum * Offset ET0 (S-hub) * Standard wheel bolts * Electronically controlled two-circuit compressed air brake system (EBS E+RSS) according to EC with automatic load-dependent braking valve (ALB), spring brake cylinder, and two keyed coupling heads * ABS 2S/2M (Wabco), with connection lines * Electronically controlled air suspension (ECAS) with automatic quick lowering during the tipping process to increase stability; can be deactivated for concrete mixers Godpfx Aozu D Rmsnqeug * Tires 385/65 R 22.5, profile S * Painted steel rims * Tire pressure monitoring system (TPMS) according to EU Regulation UN ECE-R 141 * 1/2 shell fenders with splash protection mat * Plastic fenders * Fixed underrun protection according to ECE R-58 (R58-03) * Floor 5 mm HBW 450 (Hardox 450 or comparable material) * Front wall 3 mm BS 70 * Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Pivoting and folding left side wall with spring relief * Pivoting right side wall * Spring relief on the left side wall * Pivoting rear wall * Rear wall with cam lock * Fixed rear corner posts * Fixed left front corner post * 150 mm long, fixed, straight discharge chute * Safety support for the tipper body * Dosing device by means of chains * Access ladder on the left side of the front wall * Without trailer coupling * Two keyed coupling heads with integrated line filters * Aluminum air reservoir * 7-pole ABS connection cable for EBS brake system * 1 x 15-pole front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098 * 1 x 15-pole electrical connection cable (spiral flexible cable) * Hydraulic oil filling with HLPD-22 mineral oil Note: Not in conjunction with kit delivery * Painting of the chassis frame (main frame, axle supports, and underrun protection - excluding mounted parts) in standard colors (all colors except metallic and special colors) * Color of chassis frame: Black * Painting of the entire tipper body in a standard color * Tipper body color * Individual approval (e.g., TÜV or Dekra) or Certificate of Conformity (COC) * Contour marking according to EC: white on the sides, yellow on the rear * Manufacturer's certificate * COC Note: The COC is not yet available for all MEILLER products * 1-year warranty period, excluding annual inspections (UVV tests) * 24-volt five-chamber lights with integrated triangular reflectors according to ECE-R 48, incl. lamp protection * MEILLER standard axles (SAF or BPW) * Flush-mounted, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor Note: For subsequently installed access platforms, the requirements according to Annex 2 of the DGUV Regulation 70 # Vehicles must be observed * PREVANTEC S package consisting of a pivoting and folding left side wall and flush-mounted, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor according to DIN EN 12640 Note: For subsequently installed access platforms, the requirements according to Annex 2 of the DGUV Regulati

Condition: used, mileage: 1,001 km, first registration: 01/2006, color: black, driver cabin: other, gearing type: other, Year of construction: 2006, load capacity: 17,000 kg, Vehicle location: Bovenden, with container locking system. Guodpfjkvl Rljx Anqeg Superstructure: Tele-tipping system Meiller AK 16 MT. Dismantled from an Iveco-Magirus Trakker AD260T38 6x4 with a 3200mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, axle configuration: 2 axles, first registration: 11/2004, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - EBS = More information = Weights Empty weight: 4.600 kg Carrying capacity: 13.400 kg GVW: 18.000 kg Other information Tyre size on axle 1: 385/65R22,5 Tyre tread remainder on axle 1: 60% Brake type on axle 1: drum Suspension on axle 1: air Guedsyh H Dzepfx Anqjg Tyre size on axle 2: 385/80R22,5 Tyre tread remainder on axle 2: 60% Brake type on axle 2: drum Suspension on axle 2: air Brake type on axle rear: drum Suspension on axle rear: air Chassis: steel Purchase on credit is possible: Yes

Condition: used, mileage: 1,001 km, first registration: 01/2007, color: black, driver cabin: other, gearing type: other, Year of construction: 2007, Vehicle location: Bovenden, Gsdpfsuk Np Tex Anqsug Body: 20t Meiller RK 20.65 roll-off system for containers up to 6.5m Meiller RK 20.65 roll-off system with DIN interlock for containers up to 6.5m in length. Dismantling of VOLVO FM 480 6x2 (wheelbase.4.300mm) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1,001 km, driver cabin: other, gearing type: other, Vehicle location: Bovenden. Gjdpfx Asi Rp Tksnqsug Equipment: Auxiliary frame, type 20N4, with outriggers, available in quantities of 4. Auxiliary frame, type 20N4, Meiller No. 1102 1002 571, for Actros 32/K, wheelbase 4200 mm. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: new, axle configuration: 3 axles, first registration: 04/2025, loading space length: 9,700 mm, loading space width: 2,520 mm, loading space height: 3,010 mm, Year of construction: 2025, Drive: Wheel Guedpfxjxbpizs Anqjg Empty weight: 7.900 kg Carrying capacity: 31.100 kg GVW: 39.000 kg Make of bodywork: MEILLER Tipper: Back

Condition: new, maximum load weight: 14,540 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2025, Brake system: * Wabco EBS-E / ABS (electronic braking system) * Emergency release device for spring-loaded cylinders * 19.5" disc brakes ----Axle: * 2 x 9 t BPW Eco Plus axles ----Suspension: * Air suspension with lowering function ----Drawbar: Drawbar, 2,600 mm long with 40 mm towing eye and height adjustment via draw spring & turnbuckle ----Electrics / Lighting: * 15-pin power connector * Pre-wired for Motec rear-view camera * LED tail lights with protective cover * 2 rear LED work lights * Electrical preparation for MOTEC rear-view camera * Wabco Smartboard ----General attachments: * 60-liter aluminum air tank * Reinforced single-leaf spring * Foldable, closed-type side underrun protection (suitable as advertising panel) * Enclosed plastic mudguards * Bolt-on underrun protection * Foldable "A" sign at rear * Plastic toolbox, rear right * Stainless steel mesh box, front left * Side underrun protection ----Roller track: * Roller track length approx. 7,115 mm * Recessed running surface with manually insertable roller stops – 2 positions – at front, with 2 pneumatic locks integrated into cross members at each position ----Load securing: * Automatic container locking after uncoupling the brake system from the towing vehicle * Side lashing rings for additional cargo securing ----Loading height in driving position: * Approx. 1,065 mm ----Loading dimensions: * Suitable for container lengths 5,000 – 7,000 mm according to DIN 30722-1/2, DIN 14505 ----Painting: * Chassis with KTL primer coating ----Tyres: * Tyres 265/70 R 19.5 * Tyre pressure monitoring system (TPMS) ----General info: Gsdpfx Aovxnd Nenqjug * Subject to error and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, * Color of the tipper body: 2011 Deep Orange * 9 t each (technical axle load) * Drum brake, size 420 x 180 mm, with asbestos-free brake linings and enclosed brake drum * Offset ET0 (S-hub) * Standard wheel bolts * Electronically controlled two-circuit pneumatic brake system (EBS E+RSS) according to EC with automatic load-dependent brake valve (ALB), spring accumulator cylinder, and two non-interchangeable coupling heads * ABS 2S/2M (Wabco), with connection lines * Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be disabled for concrete mixers * Tires 385/65 R 22.5, tread pattern S * Painted steel rims * Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141 * 1/2 shell fenders with splash guard mat * Plastic fenders * Rigid underrun protection according to ECE R-58 (R58-03) * Floor 5 mm HBW 450 (Hardox 450 or comparable material) * Front wall 3 mm BS 70 Gedozu D R Hopfx Anqoug * Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Swinging and folding left side wall with spring relief * Swinging right side wall * Spring relief on the left side wall * Swinging rear wall * Rear wall with cam lock * Fixed rear corner posts * Fixed left front corner post * 150 mm long, fixed, straight discharge chute * Safety support for the tipper body * Metering device using chains * Access ladder on the left side of the front wall * Without tow hitch * Two non-interchangeable coupling heads with integrated line filters * Aluminum air reservoir * 7-pole ABS connection cable for EBS brake system * 1 x 15-pole front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098 * 1 x 15-pole electrical connection cable (Wendelflex) * Hydraulic oil filling with HLPD-22 mineral oil Note: not in conjunction with kit delivery * Painting of the chassis frame (main frame, axle supports and underrun protection - excluding attachments) in standard colors (all colors except metallic and special colors) * Color chassis frame: Black * Painting of the tipper body in a standard color * Tipper body color * Individual inspection (e.g. TÜV or Dekra) or Certificate of Conformity (COC) * Contouring marking according to EC: white on the sides, yellow on the rear * Manufacturer's certificate * COC Note: The COC is not yet available for all MEILLER products * 1 year warranty period excluding the necessary annual inspections (UVV inspections) * 24-volt five-chamber lights with integrated triangular reflectors according to ECE-R 48 incl. lamp protection * MEILLER standard axles (SAF or BPW) * Floor-level, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor Note: For retrofitted access steps, the requirements of Annex 2 of the DGUV Regulation 70 # Vehicles must be observed * PREVANTEC S package consisting of a swinging and folding left side wall and floor-level, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor according to DIN EN 12640 Note: For retrofitted access steps, the requirements of Annex 2 of the DGUV Regulation 70 # Vehicles must be observed. * Tipper body width 2,380 mm All information is subject to change without notice.

Condition: new, maximum load weight: 13,320 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Equipment: ABS, Brakes: * Wabco TEBS-E / ABS (electric braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and enclosed brake drums ----Axle: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) ----Electrical System / Lighting: Gusdpfszd I Dcex Anqeg * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * 5-chamber tail lights with protective cover ----Drawbar / Fifth Wheel: * Curved central tube drawbar with height-adjustable 50 mm fifth wheel (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the tractor unit) ----General Components: * Aluminum air tank, welded box-type drawbar * Front support jack * Rear underrun protection * Enclosed plastic mudguards ----Tipping Body: * Steel 3-sided tipping body with M-Jet side boards * Continuous side walls - without center supports * Right side wall pivoting via manual central locking - preparation for long levers and hinges for a folding side wall * Hydraulically folding left side wall (side board automation) * Rear tailgate pivoting with automatic cam lock and 150 mm rear gate * Manual metering device via chain ----Thickness of floor, side walls, front and rear walls: * Front wall made of 3 mm STEELECT 240 steel * Side walls with stable, continuous, inward-sloping top rail * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400 steel) * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roll-over Cover: Roll-over cover (RAL 9006) with crank handle at the rear and guide rail on the front wall ---- Painting: * Chassis painted in RAL 7021 black-gray * Painting of side boards in RAL 9006 white-aluminum ----General Information: * Vehicle superstructure complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Immediately, from approximately week 37/2026

Condition: new, maximum load weight: 14,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, ? Steel chassis frame with two longitudinal members and lateral roller guide as well as wear-resistant running surface for container rollers ? Height-adjustable, low-maintenance drawbar ? Towing eye with a diameter of 40 mm in accordance with DIN 74054-40 ? Two pneumatic locks integrated in the cross members on each side ? Two single axles (technical axle load 9.00 tons) in twin configuration with ABS ? Twin tires ? Electronic ABS ? EBS-E ? Version 4S/3M ? ABS plug ISO 7638 ? Aluminium air tank 60 l ? Air suspension system with lowering function ? One toolbox ? One mesh box ? Bolted underrun protection Gedpfex Sbdzox Anqoug ? Drawbar length 2,600 mm ? 2 x rear work lights All information without guarantee / Subject to prior sale / Images are reference photos

Condition: used, mileage: 1,001 km, first registration: 01/2001, color: black, driver cabin: other, gearing type: other, Year of construction: 2001, Vehicle location: Bovenden, Body: 20t roll-off unit Meiller RK 20.65 for containers up to 6.5m ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Gusdstvg A Dspfx Anqog

Condition: used, axle configuration: 3 axles, first registration: 12/1999, loading space length: 7,200 mm, loading space width: 2,300 mm, loading space height: 1,600 mm, Year of construction: 1999, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 5.990 kg Carrying capacity: 29.010 kg GVW: 35.000 kg Tyre tread remainder on axle rear: 60% Purchase on credit is possible: Yes Gujdpoxt S T Tsfx Anqsg

Condition: used, axle configuration: 2 axles, first registration: 09/2007, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 1,220 mm, total width: 2,550 mm, total height: 1,220 mm, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Central lubrication - EBS = More information = Empty weight: 4.000 kg Carrying capacity: 14.000 kg GVW: 18.000 kg Selling price: € 3.000, US$ 3.510 Tyre tread remainder on axle rear: 60% Guodpfjx Hruyex Anqeg Suspension on axle rear: air Sweeper body brand: Containertransport Purchase on credit is possible: Yes

Condition: used, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2026, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, * Color of the tipping body: Ruby Red RAL 3003 (CharterWay) * 9 tons each (technical axle load) * Drum brake, size 420 x 180 mm, with asbestos-free brake linings and closed brake drum * Offset ET0 (S-hub) * Standard wheel bolts * Electronically controlled two-circuit pneumatic brake system (EBS E+RSS) compliant with EC, with automatic load-dependent brake valve (ALB) Spring accumulator cylinder and two keyed coupling heads * ABS 2S/2M (Wabco), with connecting lines * Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for concrete mixers * Tire size 385/65 R 22.5, profile S * Painted steel rims * Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141 * 1/2 shell fenders with splash guard * Plastic fenders * Rigid underrun protection according to ECE R-58 (R58-03) * Floor 5 mm HBW 450 (Hardox 450 or comparable material) * Front wall 3 mm BS 70 * Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Oscillating and folding left side wall with spring relief * Oscillating right side wall * Spring relief on the left side wall Guedozu D N Nspfx Anqjg * Oscillating rear wall * Rear wall with cam lock * Fixed rear corner posts * Fixed left front corner post * 150 mm long, fixed, straight discharge chute * Safety support for the tipping body * Metering device using chains * Access ladder on the left side of the front wall * Without towing hitch * Two keyed coupling heads with integrated line filters * Aluminum air reservoir * 7-pole ABS connecting cable for EBS brake system * 1 x 15-pole front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098 * 1 x 15-pole electrical connecting cable (Wendelflex) * Hydraulic oil filling with HLPD-22 mineral oil Note: not in conjunction with kit shipment * Painting of the chassis frame (main frame, axle supports and underrun protection - excluding mounted parts) in standard colors (all colors except metallic and special colors) * Color of the chassis frame: Black * Painting of the tipping body overall in standard color * Tipping body color * Individual inspection (e.g. TÜV or Dekra) or COC * Contour marking according to EC: white on the sides, yellow on the rear * Manufacturer's certificate * COC Note: The COC is not yet available for all MEILLER products * 1 year warranty period excluding the required annual inspections (UVV inspections) * 24-volt five-chamber rear lights with integrated triangular reflectors according to ECE-R 48 incl. lamp protection * MEILLER standard axles (SAF or BPW) * Flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipping body floor Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed. * PREVANTEC S package consisting of oscillating and folding left side wall and flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipping body floor according to DIN EN 12640 Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed. * Tipping body width 2,380 mm All information without guarantee / subject to change.

Condition: new, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Equipment: ABS, with roll tarp rear wall with cam lock swinging and foldable left side wall with spring relief swinging right side wall swinging rear wall floor: 5 mm HBW 450 (Hardox® 450 or comparable material) BPW axles disc brakes for rim size 22.5" offset ET120 air suspension tipper color: pure white RAL 9010 top-of-the-line equipment rent, buy, lease-to-own rent from 540 euros net per month with full service (rental prices vary depending on the term) all information can be found at / Godoy Ngwzepfx Anqeug Lease-to-own example: 560 euros net per month for a term of 48 months, with a down payment of 7500 euros net and a final payment of 5000 euros net all information is net, plus VAT, and subject to a positive credit check New in stock special price with cover disc brake air suspension many extras

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, * Color of the tipping body: Ruby Red RAL 3003 (CharterWay) * 9 tons each (technical axle load) * Drum brake, size 420 x 180 mm, with asbestos-free brake linings and closed brake drum * Offset ET0 (S-hub) * Standard wheel bolts * Electronically controlled two-circuit pneumatic brake system (EBS E+RSS) compliant with EC, with automatic load-dependent brake valve (ALB) Spring accumulator cylinder and two keyed coupling heads * ABS 2S/2M (Wabco), with connecting lines * Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for concrete mixers * Tire size 385/65 R 22.5, profile S * Painted steel rims * Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141 * 1/2 shell fenders with splash guard * Plastic fenders * Rigid underrun protection according to ECE R-58 (R58-03) * Floor 5 mm HBW 450 (Hardox 450 or comparable material) * Front wall 3 mm BS 70 * Left side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Right side wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Rear wall 4 mm HBW 400 (Hardox 400 or comparable material), M-JET * Oscillating and folding left side wall with spring relief * Oscillating right side wall * Spring relief on the left side wall * Oscillating rear wall * Rear wall with cam lock * Fixed rear corner posts * Fixed left front corner post * 150 mm long, fixed, straight discharge chute * Safety support for the tipping body * Metering device using chains * Access ladder on the left side of the front wall Guodpfx Ajzu D Ryenqsg * Without towing hitch * Two keyed coupling heads with integrated line filters * Aluminum air reservoir * 7-pole ABS connecting cable for EBS brake system * 1 x 15-pole front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pole socket according to ISO/DIS 12098 * 1 x 15-pole electrical connecting cable (Wendelflex) * Hydraulic oil filling with HLPD-22 mineral oil Note: not in conjunction with kit shipment * Painting of the chassis frame (main frame, axle supports and underrun protection - excluding mounted parts) in standard colors (all colors except metallic and special colors) * Color of the chassis frame: Black * Painting of the tipping body overall in standard color * Tipping body color * Individual inspection (e.g. TÜV or Dekra) or COC * Contour marking according to EC: white on the sides, yellow on the rear * Manufacturer's certificate * COC Note: The COC is not yet available for all MEILLER products * 1 year warranty period excluding the required annual inspections (UVV inspections) * 24-volt five-chamber rear lights with integrated triangular reflectors according to ECE-R 48 incl. lamp protection * MEILLER standard axles (SAF or BPW) * Flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipping body floor Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed. * PREVANTEC S package consisting of oscillating and folding left side wall and flush-mounted, folding lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipping body floor according to DIN EN 12640 Note: For subsequently installed access ladders, the requirements in Appendix 2 of the DGUV Regulation 70 # Vehicles must be observed. * Tipping body width 2,380 mm All information without guarantee / subject to change.

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, Brakes: * Wabco TEBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums ----Axles: * 2 x 9 ton BPW or SAF axles ----Suspension: * Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers) Godpfjzd I Diox Anqoug ----Drawbar / Flange coupling: * Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle) ----Electrical system / Lighting: * Tire pressure monitoring system (TPMS) * 15-pole electrical connector * 5-chamber tail lights with protective cover ----General components: * Aluminum air reservoir * Welded box-type drawbar * Support jack at the front * Underrun protection at the rear * Closed plastic individual fenders * Access ladder on the front left side, on the front panel ----Tipping body: * Steel 3-sided tipping body with M-Jet sideboards * Front panel made of 3 mm STEELECT 240 steel * Side walls with sturdy, continuous top rail inclined inwards * Side walls and rear gate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls – without center rail * Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall * Left side wall pivots via manual central locking and can be folded down with sideboard spring lift * 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate * Manual metering device via chain * 5 mm bridge floor made of STEELECT steel (HBW 450 steel) ----Roller cover: * Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel ----Painting: * Chassis painted in RAL 7021 black-gray * Painting of the sideboards in RAL 9006 white aluminum ----Information: * Vehicle body complies with EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available from approximately week 37/2026