Used Kempf Skm Semitrailers for sale (98)

Condition: used, maximum load weight: 29,780 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 08/2020, next inspection (TÜV): 08/2026, loading space length: 8,700 mm, loading space width: 2,300 mm, loading space height: 2,100 mm, loading space volume: 39 m³, Year of construction: 2020, Brake system: * Wabco EBS with RSS (electronic braking system with Roll Stability Support) * Emergency release device for spring-loaded cylinders * Disc brakes with 430 mm disc diameter ----Axles: * 3 x 9 t SAF axles * 1st axle liftable (fully automatic and as traction aid) ----Suspension: * Air suspension with lifting and lowering device ----Electrics / Lighting: * Wabco SmartBoard * 15-pin power connector * 3 round LED two-chamber tail lights * Additional combination light (reversing light & rear fog light) * 2 additional LED reversing lights * Left and right, one LED work light each in the area of the landing legs * Reversing lights ----General attachments: * Aluminum air tanks * Aluminum landing legs with 24 t support load * Foldable aluminum underrun guard * Tow eye mounted at rear frame end * Enclosed single plastic mudguards * 2 plastic toolboxes on the left side, approx. 660 x 500 x 460 mm * 30 l plastic water tank with drain faucet on the right side * Side underrun protection only on the right side * 3.8 m aluminum access ladder stored on the right above the mudguard * Foldable A-sign at the rear * Air connection for air gun at rear left - without air gun * Access steps and platform in front of the bulkhead * Shovel and broom holder outside on right side of bulkhead ----Chassis: * Chassis made of high-grade fine-grained steel in lightweight construction (tapered to the front) * No holes in the web plate of the longitudinal beams Ijdeydg A Sspfx Afnjtc ----Tyres: * Alcoa Dura-Bright aluminum rims ----Tipping body: * Aluminum half-shell rear tipper body made of wear-resistant aluminum alloys * Front wall and tailgate angled at 20° * Top rails made of robust aluminum profiles * Front wall 5 mm thick * Sidewalls 5 mm thick – higher towards the rear * Rear wall 5 mm thick with reinforcement profiles supported by double hinge bearings and replaceable rubber seal * Automatic 2-hook locking incl. 2 locking pins with holders * 2 mechanical additional tension locks left and right * Floor 8 mm thick * Load pressure gauge mounted front left * 2 air vibrators with oiler below the floor (about 1/3 and 1/2 of the load area from the front), operable by switch at rear left ----Tarpaulin: * Roll tarp in grey ----Load volume: * approx. 38.5 m³ ----Fifth wheel height: * loaded approx. 1,200 mm ----Hydraulics: * Front hydraulic cylinder with 190 to 250 bar operating pressure ----Paintwork: * Attachments galvanized * Tipping body in cherry red * Chassis in black-grey ----Info: * --Technical permissible gross weight of 38,000 kg possible-- * Subject to error and prior sale ----Availability: Immediately available ex Egestorf at the A7

Condition: used, maximum load weight: 29,780 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2019, next inspection (TÜV): 09/2026, loading space length: 8,700 mm, loading space width: 2,300 mm, loading space height: 2,100 mm, loading space volume: 39 m³, Year of construction: 2019, Brake system: * Knorr EBS with RSS (electronic braking system with roll stability support) * Emergency release device for spring brake cylinders * Disc brakes with 430 mm disc diameter ----Axles: * 3 x 9 t SAF axles * 1st axle liftable (fully automatic and as start-up aid) ----Suspension: * Air suspension with lifting and lowering device ----Electrics / Lighting: * Knorr trailer information module * 15-pin power connector * Additional combination lamp (reversing light & rear fog lamp) * 2 additional LED reversing lights * 1 LED work light on each side left and right at the support winch area * Reversing lights ----General mounted parts: * Aluminium air tank * BPW crank support winches * Foldable aluminium underride guard * 2 towing eyes mounted at the rear frame end * Closed individual plastic mudguards * 2 plastic toolboxes approx. 660 x 500 x 460 mm on the left side * 30 l plastic water tank with drain cock on the right side * Side guard only installed on the right side * 3.8 m aluminium ladder stored on the right above the mudguard * Foldable "A" warning sign at the rear * Access and standing platform in front of the headboard * External shovel and broom holder on the right side of the headboard Isdpfxeydg A Eo Afnjtc ----Tyres: * Alcoa Dura-Bright aluminium rims ----Chassis: * Chassis made of high-grade fine-grained steel (tapered towards the front) ----Tipping body: * Aluminium rear tipping half-shell body made from wear-resistant aluminium alloys * Front wall and tailgate inclined at 20° * Top rails made from robust aluminium profiles * Front wall 5 mm thick * Side walls increase in height towards the rear, 5 mm thick * Rear wall 5 mm thick, mounted with reinforcement profiles, double swivel bearing and replaceable rubber seal * Automatic double-hook locking system incl. 2 locking pins with holder for the lock * 2 mechanical additional tension locks on left and right sides * Floor 8 mm thick * Load gauge located front left * 1x air vibrator with oiler mounted under the floor - operated by a switch at the rear left ----Hydraulics: * Front hydraulic cylinder with operating pressure of 190 to 250 bar ----Roll tarp: * Grey roll tarp ----Loading volume: * Approx. 38.5 m³ ----Coupling height: * Loaded approx. 1,200 mm ----Paint: * Tipping body in cherry red * Chassis in black-grey ----Information: * --Permissible gross weight technically possible: 38,000 kg-- * Subject to errors and prior sale ----Delivery time: * Available immediately

Condition: used, maximum load weight: 32,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space length: 9,630 mm, loading space width: 2,440 mm, loading space height: 1,940 mm, id: 330237 LIFTING AXLE, SAF, 45 m³ For more information please call: , +????? ?? ????? ???? ????? ???: 420734511212 Ijdpfx Aeyfk Eaefnstc

Condition: used, maximum load weight: 29,060 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 05/2026, loading space length: 7,505 mm, loading space width: 2,413 mm, loading space height: 1,228 mm, loading space volume: 23 m³, total width: 2,550 mm, total height: 3,000 mm, Equipment: ABS, The trailer is inbound. More pictures and data will follow shortly. * 1st axle liftable * BPW axles * Wabco Trailer EBS * Front platform * Roll tarp cover * Ladder * Underrun protection ---- * Tire size: 385/65R22.5 * Technical gross weight: 38,000 kg * Unladen weight: 5,940 kg * Overall length: 8,950 mm * Next safety inspection due: 11/2026 ---- Vehicle number: 11735 ---- Subject to errors and prior sale ---- Advertising and various lettering have been digitally removed. ----- We are happy to assist you with all formalities involved in the purchase of a vehicle. Simply let us know your requests and suggestions and we will take care of them. Among other things, we can offer you the following services at extra cost: ---- * Trade-in of your old vehicle * TÜV/General inspection * Complete export processing * Financing arrangement * Application for export license plates * Vehicle delivery * Vehicle registration * Vehicle recovery and transport services ---- YOUR VTS TEAM Itsdpfx Aoya S Aiefnec

Condition: used, empty load weight: 6,100 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 11/2009, next inspection (TÜV): 10/2026, loading space length: 6,995 mm, loading space width: 2,300 mm, loading space height: 2,250 mm, loading space volume: 36 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2009, Equipment: ABS, Unladen weight: 6,100 kg, permissible total weight: 32,000 kg, cargo area (L x W x H): 6,995 mm x 2,300 mm x 2,250 mm. Tyre size: 385/65 R22.5, cargo volume: 36 m³, 1st axle: , 2nd axle: , air suspension, foldable underrun protection, electronic braking system (EBS), pendulum tailgate, sliding roof, connection plug 1x15 and 2x7 pin, grain tipper. You will find our complete vehicle range at . Interested in financing? With our Value Added Service, we offer customised financing options, full service and telematics solutions. We are happy to advise you. Itjdpfxeyadins Afnoc

Condition: used, axle configuration: 3 axles, first registration: 02/1999, next inspection (TÜV): 04/2025, loading space length: 7,000 mm, loading space width: 2,300 mm, loading space height: 1,750 mm, Kempf Tipper Semi-Trailer - Type: SK34/3 Ijdpsvv Dkaofx Afnstc - Two-way tipper - Aluminum side walls - Drum brakes - LED rear lights - Next safety inspection (SP) due: 10.2024 Errors and prior sale excepted. Internal vehicle number: 10581 WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp.

Condition: used, axle configuration: 3 axles, first registration: 05/2018, loading space length: 10,650 mm, loading space width: 2,300 mm, loading space height: 2,450 mm, loading space volume: 60 m³, Year of construction: 2018, Equipment: ABS, KEMPF TIPPER 60m3 / YEAR 2018 / FLAP-DOORS / LIFT AXLE CAPACITY: 60 M3 STEEL CHASSIS ALUMINIUM BODY FLAP-DOORS GRAIN CHUTE BODY DIMENSIONS: LENGTH: 10.65 M HEIGHT: 2.3 M WIDTH: 2.45 M 3 JOST AXLES LIFT AXLE TARP TYRE SIZE: 385/65 R22.5 ALUMINIUM RIMS Iedoybn Sijpfx Afnstc SPARE WHEEL HOLDER TOOLBOX GROSS VEHICLE WEIGHT: 35,000 KG SERVICED, ACCIDENT-FREE CONDITION: VERY GOOD NET PRICE: 24,900 EUR FULL OFFER OF OUR COMPANY ON THE WEBSITE: POSSIBILITY TO SEND DETAILED PHOTOS AND VIDEOS VIA WHATSAPP, VIBER OR EMAIL ADDRESS. FOR MORE DETAILED INFORMATION, PLEASE CONTACT US BY PHONE. WE SPEAK THE FOLLOWING LANGUAGES: - Polish, English, German, Romanian, Spanish, Italian, French, Turkish, Hungarian, Slovak, Slovene, ... AND OTHER LANGUAGES UPON REQUEST.

Condition: used, empty load weight: 3,360 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2017, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 4,900 mm, color: green, Equipment: ABS, Disc brake EBS Payload 14,640 kg BPW axles Alcoa alloy wheels Rigid underrun protection Itsdpfsvkxp Hex Afnjc Lashing rails Floor made of 40 mm aluminum profiles Rack pockets Warning signs for 3 m transport Errors excepted

Condition: used, maximum load weight: 29,280 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2020, next inspection (TÜV): 12/2025, loading space length: 7,900 mm, loading space width: 2,400 mm, loading space height: 1,350 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 2,838 mm, Equipment: ABS, 2-way aluminum tipper semi-trailer SK 35/3-S with grain chute / swingable rear wall / ALCOA aluminum rims ----### Floor made from 10 mm aluminum sheet ###---- Aluminum tipping body, Payload: 29,280 kg, Volume: approx. 25 m³ 1st axle liftable, PVC roll tarp (roller tube design) and crank rollable to the right, 2x LED work lights at the rear, SAF axles, Steel standing platform with safety grating, with protective railing and access steps, Foldable rear underrun protection, Underrun protection on the left, 2x drop-down landing legs, Disc brakes, Broom and shovel holder mounted on the front wall, Air suspension, Pendulum tailgate with pneumatic locking (2-hook lock), 1x grain chute, Sideboards to the left, 1x stainless steel tool box on the right, Fenders on all wheels, With load gauge (ton scale), Cargo area dimensions LxWxH: 7,900 x 2,400 x 1,350 mm, Sidewall height: approx. 1,350 mm, Loading height: approx. 2,838 mm, Exterior dimensions LxWxH: 9,000 x 2,550 x 2,838 mm, Wheelbase: 3,530 x 1,320 x 1,320 mm, Tyres: 385/65R22.5 on ALCOA aluminum rims, Tread depth right front: 13 mm, Tread depth right middle: 6 mm, Tread depth right rear: 15 mm, Tread depth left front: 14 mm, Tread depth left middle: 7 mm, Tread depth left rear: 14 mm, Further equipment: KEMPF 3-axle semi-trailer tipper, type SK 35/3-S, hydraulic tipping to two sides (left and rear), Saddle height loaded approx. 1,230 mm, SAF axle assembly type INTRADISC plus (B 9) in off-road version, with disc brakes, Disc diameter approx. 430 mm (large disc), with lightweight brake caliper, Axle B9-22S01, Air suspension unit with large 350 mm air bellows, 1st axle as a lift axle, fully automatic and as starting aid, can be raised when loaded by a switch in the driver’s cab -> speed-dependent according to EU directives, additionally with forced lowering when empty Disc wheels: 11.75 x 22.5, ALCOA aluminum wheels, Dura-Bright, EVO, ET 120, 26 mm bore, Chrome-plated wheel nut caps, Suspension with lifting and lowering device (rotary slide valve), Electronic braking system (EBS), Knorr brand, With parking brake via spring-loaded cylinder, With RSP programming (Roll Stability Program), ABS in 4-channel configuration (4S/2M), With brake light power supply (ABS emergency function), Aluminum air tanks 2x 60 liters, Kingpin 2" with one mounting plate, 2 aluminum drop-down landing legs, designed for full unhooking, support load max. 24 t (2x 12 t), Hydraulic multi-piston press with cardanic suspension, Single-circuit hydraulic system, DN 20 quick-release coupling, Techno Chemie brand, group 6 (type 65), bolted version without tear-off protection, Separate LED license plate lighting (left and right), Marker lights (LED) left and right at the end of the chassis, with side marker lights (LED) and front position lights (LED), with large multi-chamber lights, 2x LED work lights at the rear of the vehicle, switched via reverse gear, 1x 15-pin socket, Ijdpfowllhwsx Afnjtc PVC half-shell fenders, Fenders with foldable mud flaps, Foldable aluminum underrun protection at the end of the chassis according to EU directives. Tow device integrated into the underrun protection brackets, Vehicle with contour marking on the sides (white) and rear (red), Tipping body made of welded aluminum sheets and profiles, Floor made of 10 mm aluminum sheet, reinforced from below, raised on the left side, Front wall made of 40 mm

Condition: used, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 08/2020, Equipment: ABS, Vehicle identification number: WKY2T0118LM039671 Unladen weight: 4,660 kg German roadworthiness inspection (HU) valid until 10/2026 – safety inspection (SP) until 04/2026 SAF axles with disc brakes Air suspension Internal dimensions: 4,820 x 2,425 x 1,090 mm Sliding tarp Adjustable underrun protection Tyres: 385/65 R 22.5 Ijdpfx Afjx Nk E Asnetc Subject to alterations, prior sale, and errors. The description serves for the general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The specification in the purchase contract is decisive. Our offer generally does not include new TÜV certification. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, empty load weight: 6,720 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 02/2026, loading space length: 12,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 425/65 R22,5, wheelbase: 2,000 mm, Equipment: ABS, Colour RAL 6416 turquoise green EBS Disc brakes Payload 28,280 kg BPW axles 2x 10,000 kg, both forced-steered Lifting and lowering device Rigid underride guard 10 pairs of stanchion pockets Aluminium floor Container locks 2 pairs Isdpfxeww Ixcj Afnjtc Subject to errors and prior sale.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2013, Equipment: ABS, GERMAN SEL 5542 Kempf SKM 35/3 Trailer Bioliner / Dual transport system for bulk goods and liquids German registration First registration: 13-12-2013 Total (kg): 35,000 Total (kg): 35,000 Unladen weight (kg): 9,780 VIN: WKY3S0035DM027004 TIRES AND AXLES: Tires: 385/55 R 22.5 3 SAF axles 1st lift axle Air suspension / Disc brakes Itsdsiru Tnspfx Afnsc Aluminum rims Tires on documentation: 385/65 R 22.5 OTHER SPECIFICATIONS: Different transport goods with completely different consistency (bulk and liquid) M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC d. (German, Bosnian) L. OBODYNSKA Ukrainian/?????, Russian/??-?????) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, RUSSIAN, PORTUGUESE, POLISH Although every effort has been made to ensure the accuracy of the information, we cannot guarantee for errors or omissions. We ask our customers to consult the available photos. The stated measurements are approximate values.

Condition: used, maximum load weight: 28,460 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2017, loading space length: 7,500 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 26 m³, Year of construction: 2017, Equipment: ABS, Air, lift, BPW disc, EBS, aluminum support leg, PVC half-shell mudguard, UFS foldable made of aluminum, floor 4 mm Hardox, side walls and front wall made of 40 mm aluminum wooden profiles, side wall on the left 1x vertically divided pendulum, corner stanchions fixed at the front and rear, one center stanchion on the left, clay wedge, tensioning chains, bulk material deflector on the left side, RW 4 mm Hardox pendulum, chute, walkway with ladder, PVC roll-up tarpaulin with central locking, loading pressure gauge, WZK Itedpev Ttpasfx Afnjc

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2011, Equipment: ABS, Visit our website, where you can find our complete vehicle inventory with many additional photos and information in multiple languages. Itjdswyrmvspfx Afnsc SEL 70 Kempf SK35/3 Lift axle German registration / 1st owner First registration: 23/11/2011 Gross vehicle weight (kg): 35,000 Permissible total weight (kg): 35,000 Unladen weight (kg): 6,180 VIN: WKY3S5035BM025215 Inspection (HU): 05/2026 / Safety inspection (SP): 11/2025 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 BPW axles 1st axle liftable Air suspension Disc brakes BODY: Internal dimensions: Width (m): 2.42 Length (m): 7.51 Side panel height (m): 1.20 TIPPER: Body capacity (m³): 26 Side cover Work platform with anti-slip floor VEHICLE DOCUMENTS: Registration certificate part 1 (Schein) Registration certificate part 2 (Brief) Additional documents available upon request for an extra charge. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC d. (German, Bosnian) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH Every effort is made to ensure the accuracy of this information, but we cannot accept responsibility for any inaccuracies or omissions. We kindly ask our customers to consult the available photos. All dimensions stated are approximate values. Our vehicles are sold as seen, in their current condition. We invite customers to visit our facility to personally inspect the condition of the vehicle. Test drives are also possible. Please note that the batteries included with the vehicle are those currently installed. Should the customer require new batteries, we can provide pricing information upon request.

Condition: new, maximum load weight: 28,360 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 54 m³, Year of construction: 2024, Equipment: ABS, NEW VEHICLE - AVAILABLE IMMEDIATELY!!! FOR SALE, FOR RENT OR BY ARRANGEMENT FOR RENT WITH OPTION TO PURCHASE!!! approx. 54m³ Kempf steel trough for scrap / HARDOX ----* Manufacturer: Kempf * Type: SKM 36/3 SHL - Light * First registered: - (NEW VEHICLE) * Total weight: 36,000 kg * Empty weight according to manufacturer: 7,640 kg * Payload: 28,360 kg * Volume: approx. 54m³ (9.50m long x 2.28m to 2.33m wide x 2.40m high) * Axles: 3x SAF axles / 1st axle lift axle with traction aid Itodpouc Nkyofx Afnec * Suspension: air suspension with lifting and lowering / quick ventilation * Tires: 385/65 R 22.5 Alcoa alloy wheels * Color: trough + chassis RAL 9005 black, tarpaulin silver gray * EBS Wabco * Wing door with 1/2 left and 1/2 right * Steel trough with highly wear-resistant HARDOX steel * Operating platform with access at the front left * Front wall made of approx. 3.2mm thick HARDOX steel * Floor made of approx. 5mm thick HARDOX steel * Side walls made of approx. 4mm thick HARDOX steel * 4 cross beams * Grain pusher at the rear right approx. 400 x 400mm * Aluminum full load supports (drop load supports) * Shovel and broom holder * PVC half-shell fender * 2x PVC tool boxes on the left (approx. 660mm long x 500mm wide x 460mm high) * 4m aluminum ladder * Complete lighting system complies with the ADR standard * LED marker lights left and right * 2 additional LED reversing lights * Automatic lowering when tipping * Loading pressure gauge NEW VEHICLE - AVAILABLE IMMEDIATELY!!! FOR SALE, FOR RENT OR RENT BY ARRANGEMENT WITH PURCHASE OPTION!!!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, New vehicle! Available for rent, purchase, or rent-to-own by arrangement! 54 m³ Kempf grain tipper semi-trailer with sluice / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Model: SKM 36/3 AK – High-performance sluice tipper with 3 compartments * First registration: - (NEW) * Volume: approx. 54 m³ (10.00 m x 2.43 m wide x 2.20 m high) * Gross vehicle weight: 36,000 kg * Unladen weight: approx. 6,750 kg * Payload: approx. 29,250 kg * Axles: 3x SAF axles / first axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with lift and lower function / quick-release air dump * EBS Wabco * Kempf 400 high-performance steel sluice with throughput capacity of 30–40 m³/h * 2x partition walls with 3 locking positions / sliding rails in the top chord * Transverse auger installed at the end of the loading floor * Storage box for conveyor hoses on the right side (hoses not included) * Combination tailgate (swing + hinged doors (2/3 + 1/3)) * Pneumatic 4-hook door locking * Doors split 1/3 to 2/3 * 1x grain chute with funnel/dust bag * Saddle height from 1,170mm–1,230mm * 1x approx. 4.00m ladder * 1x water tank * 1x air connection, rear left * 2x toolboxes, 660x500x460 mm * 1x control box rear right * Single mudguards * Aluminium landing legs * Front operator platform Ijdpfxswuyxps Afnetc * Roll tarp with central locking * 3x tarp bows * Load pressure gauge * Shovel and broom holder * Double round LED three-chamber tail lights * 1x LED work light left * 1x LED work light right * 1x LED interior cargo lighting with switch * Tipper body RAL 9007 grey aluminium, chassis RAL 9005, tarp colour: dust grey * Aluminium air tanks * 4 m aluminium ladder * Tyre pressure monitoring * Internal climbing steps on front bulkhead * 6 mm floor New vehicle! Also available FOR RENT!

Condition: used, maximum load weight: 28,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2024, loading space length: 10,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 57 m³, Equipment: ABS, Air suspension, lift, SaF disc, EBS, aluminium drop supports, electric holder, PVC half-shell mudguards, WZK, side underrun protection, access ladder, foldable steel UFS, reflective panel, aluminium rims, load pressure gauge, body made of HB 450 with 5 mm floor, 4 mm front wall, 4 mm side walls, 3 mm rear wall as a double-wing door, slider, walkway with ladder, PVC roll-up tarpaulin with central locking, tarpaulin protection, A-sign. Itodjxqkxpepfx Afnoc

Condition: used, empty load weight: 4,360 kg, maximum load weight: 14,640 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 12/2016, loading space length: 5,400 mm, loading space width: 2,430 mm, loading space height: 1,100 mm, suspension: air, color: blue, Year of construction: 2016, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st owner * Condition as shown in photos * Three-way tipper tandem trailer from premium manufacturer Kempf, model THK18 * Body dimensions: 5400 x 2430 x 1000 mm, floor 7 mm aluminium, left side wall aluminium 40/30 mm, right side wall aluminium 40 mm * Rolling tarpaulin * Swivel tailgates * 2nd axle with lift axle * Air suspension with lifting and lowering device * Adjustable underrun protection * Alcoa aluminium rims * BPW axles * Disc brakes * ABS/EBS * Spring brake cylinders * Storage box * Gross vehicle weight: 19,000 kg * Unladen weight: 4,360 kg * Payload: 14,640 kg If a new TÜV inspection is required, we will gladly provide you with an offer from one of our partner workshops. Iodpfsxdmquox Afnstc Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the item to ensure there are no misunderstandings regarding its condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. No liability will be assumed for errors or incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Specifications, prior sale, and errors excepted.

Condition: used, overall weight: 31,300 kg, axle configuration: 2 axles, first registration: 07/1989, loading space length: 13,600 mm, loading space width: 2,370 mm, loading space height: 600 mm, Axle version BPW Luft 2x10 to, 2nd axle steered Itodpfx Aed U Rnaefnjc 5 x cable pulleys Tires 425 / 65 R22.5 Tread depth 6/10 9/14

Condition: used, machine/vehicle number: 284, empty load weight: 4,340 kg, maximum load weight: 13,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/1996, loading space length: 4,800 mm, loading space width: 2,360 mm, loading space height: 1,000 mm, loading space volume: 11 m³, suspension: air, tire size: 385/65 r22,5, wheelbase: 1,310 mm, color: blue, Equipment: ABS, Drum brake Swinging steel drop sides SAF axles Folding underride guard Errors excepted Itjdsi Dzc Djpfx Afnsc

Condition: used, machine/vehicle number: 330, empty load weight: 7,630 kg, maximum load weight: 27,370 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2006, loading space length: 10,600 mm, loading space width: 2,450 mm, loading space height: 900 mm, loading space volume: 23 m³, suspension: air, tire size: 385/65 R 22,5, color: silver, Equipment: ABS, EBS Disc brake Isdpfx Afeiuit Henotc Wheelbase 1,310 mm Roll-up tarpaulin Platform Fold-down side walls Tailgate swinging and swiveling to the right Lashing rings DC axles Aluminum rims Lifting and lowering device Folding underride guard Errors excepted

Condition: used, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, Model year * Model year: 2011 Iodewrku Nspfx Afnetc Other dimensions and weights * Payload: 28,200 kg * Permissible total weight: 35,000 kg ----Vehicle location: Noris Truck Center GmbH, 90518 Altdorf near Nuremberg Errors and changes reserved

Condition: used, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2011, color: red, gearing type: mechanical, Unladen weight: 6800kg, permissible total weight: 35000kg, Vehicle location: Noris Truck Center GmbH, 90518 Altdorf near Nuremberg. Errors and changes excepted. Itedpfx Afswri Nfenec