Used Humbaur 3-Achs-Tieflader Htd 30-K V5 for sale (53,012)

Condition: new, empty load weight: 6,650 kg, maximum load weight: 23,350 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 3-AXLE LOW-LOADER => FULL-SUSPENSION (front and rear) => HOT-DIP GALVANIZED Perm. total weight 30,000 kg Payload approx. 23,350 kg Chassis frame hot-dip galvanized Air suspension SAF axle with drum brake EBS electronic braking system 235/75R17.5 tires - 12-ply Drop deck length approx. 6500 mm 3 pairs of lashing rings 10 to. recessed in the low bed 2 pairs of lashing rings 10 to. recessed in the high bed 4 pairs of lashing points 3 to. on the outer frame Fedohmm N Ujpfx Adqspg 3 pairs of lashing eyes 6 to. on the outer frame 6 pairs of stanchion pockets 90 x 50 mm in the outer frame Storage box at the top front of the plateau, with hinged lid 3-meter widening package without slope, with hinged extension arm Spring ramp jack 4 x warning signs Rotating beacon Storage compartment under the cargo bed 1 part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps Extras if required : Hydraulic ramp lift 2690.00 + VAT => Freight costs for delivery: 2,90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact person: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: used, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2023, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 24,000kg / 30,000kg Empty weight: 6,300kg Payload: 17,700kg / 23,700kg Total length: 10,900mm Loading length: Total 8,600mm, 6,500mm including rear incline, 2,100mm cranking Width: 2,550mm Loading height: 900mm Additional info: - Robust welded construction from high-strength fine-grained steel - Hot-dip galvanized - Rear support - Twin tires 235/75R17.5 - Warning signs - LED reverse lights - Lashing points outer frame - Lashing eyes 4x cranking, 6x low bed (10,000 daN) - One-piece hot-dip galvanized drive-on ramps (3,100mm x 750mm) with 50 mm softwood covering, laterally movable Fjdpfjwrv Saox Adqjpg - Storage box in cranking - Plastic toolbox - Collision protection - Floor with 50mm softwood covering - Climbing strips at the rear end of the drive-on ramp

Condition: new, empty load weight: 6,000 kg, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, Year of construction: 2026, Equipment: ABS, center pivot plate, 3-AXLE HUMBAUR LOW LOADER including: 3 pairs of 6-tonne outer frame => HOT-DIP GALVANIZED CHASSIS FRAME => HOT-DIP GALVANIZED BOGIE FRAME => HOT-DIP GALVANIZED ACCESS RAMPS Fsdpfxjd U A Tgj Adqepg => 10 PIECES 10 TONS LASHING POINTS => 10 PIECES 3 TON lashing points, outer frame => 8 PIECES 2 TONS OF TOWING POINTS, above wheels => SPRING LIFTING MECHANISM FOR THE ACCESS RAMPS => Ø 40 mm DRAWING FORK => DRIVING RAMPS approx. 2,700 MM LONG => EXPANDING ROMPS approx. 750 MM WIDE => TWIN TIRES 235/75 R17.5 INCH => LOAD HEIGHT LOADED ONLY approx. 860 MM => CUPD SIZE / B SIZE approx. 10,720 MM => FRONT CORNERS BEVELED => TWO FOLDING SUPPORTS AT THE REAR => UVM. => freight costs for delivery: 2.90 Euro plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: used, empty load weight: 6,740 kg, maximum load weight: 23,260 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2019, next inspection (TÜV): 01/2027, suspension: air, tire size: 235/75 R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75 R17,5 ---/140J, rear tire size: 235/75 R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, stake pockets, -- Printing errors, mistakes and changes reserved, sample images -- More data at: !, More details: ! Fpjdpfxey Rlkpe Adqog

Condition: new, maximum load weight: 23,600 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, * Humbaur HTD 308525 * New vehicle * Low loader * GVW: 30,000 kg * Unladen weight: 6,400 kg * Payload: 23,600 kg * Overall dimensions: 10,780 mm x 2,540 mm x 3,780 mm * Internal dimensions: 6,500 mm x 2,520 mm * Loading height: 890 mm * Tyres: 12 x 235/75 R17.5 * Ramp angle 10 degrees * Parabolic or air suspension * 24V EBS braking system * 24V electrical system * Heavy-duty welded construction from fine-grain steel * Warning panel (4-way) * Rotating beacons * 3 pairs of 10-tonne lashing rings recessed in the low bed * 2 pairs of 10-tonne lashing rings recessed in the gooseneck * 4 pairs of 3.0-tonne lashing rings on the outer frame * 4 pairs of 2.0-tonne lashing rings above wheel arches * 50 mm softwood floor * Chassis frame and bogie hot-dip galvanized in immersion bath * One-piece hot-dip galvanized loading ramps * We are happy to provide a tailored quote * Several vehicles in stock * Also available in other sizes and weight classes ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to prior sale, as we offer this item on other portals as well. We strongly recommend inspection and examination to avoid any misunderstandings about the condition or suitability. Inspections and examinations can be arranged at any time by appointment and are expressly encouraged!!! Images similar; may include optional accessories at additional cost. Fpjdpfotyh Dpex Adqjg Stated internal dimensions are approximate. For new vehicles, additional costs for freight and documents may apply. TRADE-INS ACCEPTED FOR ALMOST ANYTHING!!! PART-EXCHANGE AND CASH-UP DEALS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, total width: 2,540 mm, total height: 3,780 mm, Year of construction: 2026, Equipment: ABS, * Humbaur HTS 30 K * Heavy-duty semi-trailer * Low loader * NEW * Immediately available * Fully galvanized * Robust construction * Overall dimensions: 12,630mm x 2,540mm x 3,780mm * Internal dimensions: 12,000mm x 2,540mm * Loading height: 890mm * Fifth wheel height: 1,230mm * Fifth wheel platform: 3,500mm * Low bed: 8,680mm * Gross weight: 48,000kg * Payload: 38,000kg * Tyres: 235/75R17.5 * SAF low-loader axles with lift and trailing steering axle * Air suspension with raise/lower function * Twin tyres * EBS brake system * 24-volt lighting system * LED side marker lights * Wabco Smart Board * 2-inch kingpin * Chassis frame hot-dip galvanized by immersion * Heavy-duty, welded chassis frame * Climbing strips on the ramp incline * 50mm softwood floor * Recess for excavator arm * 3m equipment package * Steel toolbox under the loading platform * Gooseneck with 400mm front wall * 400mm aluminium side drop-down boards * Front storage box with lid * 3 pairs of 6t lashing rings * 3 pairs of 3t lashing rings * 5 pairs of 10t lashing rings * 6 pairs of 3t lashing rings * 6 pairs of 2t lashing rings * Ramps with rubber covering * Spare wheel with holder on the front wall * LED reversing lights * Visible surface painting available upon request * Further equipment options possible upon agreement ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right of prior sale, as this item is also listed on other platforms. We strongly recommend a viewing and inspection to ensure the buyer has a clear understanding of the condition and suitability of the trailer. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! The internal dimensions provided are approximate. For new vehicles, additional costs for freight and documentation may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGE AND ADDITIONAL PAYMENT POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday–Friday 8:00 to 17:00, Saturday 8:00 to 14:00 Always over 500 new and used trailers in stock!!! Tel.: Fax: Fsdpfx Ador Ic Rwjqspg

Condition: as good as new (ex-display), empty load weight: 10,000 kg, maximum load weight: 30,000 kg, overall weight: 40,000 kg, axle configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2025, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Perm. total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Perm. total weight special equipment: 40,000 kg Payload special equipment: approx. 30,000 kg Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical total weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg each Lashing points in the low-bed outer frame 4 pairs of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the high-bed outer frame 1 pair of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the low-bed outer frame Suspension: Air suspension unit including lifting and lowering acting on the rear axle unit Brake system: Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake including two external test ports for brake/modulator and bellows pressure Electrics: LED lighting with indicator function for side marker lights, multivoltage (12–24V) Turntable: Heavy-duty welded construction with low-maintenance ball-bearing turntable Fpsdpoiciutsfx Adqjg Towing equipment: Cranked drawbar with 50 mm towing eye, low-maintenance silent bushings including height adjustment for drawbar Chassis: Heavy-duty welded construction made of high-tensile fine-grained steel, through-running cross-members for maximum stability Wheel recesses front (approx. 2,500 mm upper length, 410 mm depth) and rear (approx. 1,470 mm upper length, 370 mm depth); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cutouts above the rear wheels with 2,010 mm wheelbase, front corners chamfered, rear with climbing strips on ramp incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) on high-bed outer frame 1 pair of stake pockets (90x50 mm) on low-bed outer frame Floor: 50 mm softwood flooring (painted/impregnated) Ramps: One-piece hot-dip galvanized loading ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, direct-acting upright spring-assist for easiest handling Finish: Chassis frame hot-dip galvanized in immersion bath Support: 2 foldable supports at the rear left and right of the vehicle Equipment: Folding side underrun protection Front semi-circular plastic mudguards; rear straight steel mudguards with anti-spray 2 wheel chocks with holders; contour markings according to ECE regulation R48 Front wheel recess cover: With 3 pairs of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00888 Hardwood covering for front wheel recess cover Rear wheel recess cover: With 1 pair of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00897 Hardwood covering for rear wheel recess cover 3 pairs of bolted lashing eyes, 6 t 3 m equipment package without incline B=11,200 Folding outriggers with softwood boards 970.04199-36 LED warning package HTD, cranked Aspöck warning boards 4 times, electrics and revolving beacon 1 pair of storage compartments for 3 m wood planks package (2 pieces mounted lengthwise under the loading area in front of the wheel recess) Rubber coat

Condition: new, empty load weight: 9,650 kg, maximum load weight: 30,350 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,740 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 4-AXLE LOWBED TRAILER WITH TOP-SPEC EQUIPMENT! => HOT-DIP GALVANIZED (CHASSIS FRAME, BOGIE FRAME, ACCESS RAMPS) => FULL AIR SUSPENSION => WITH LIFTING AND LOWERING FUNCTION (REAR AXLE MODULE!) => SAF LOWBED AXLES => LASHING PACKAGE => OUTER FRAME WITH PERFORATIONS FOR ADDITIONAL LASHING POINTS => CLEAT STRIPS AT REAR OF ACCESS SLOPE => 6 LASHING POINTS IN THE EXCAVATOR ARM TROUGH AT THE REAR => LONG ONE-PIECE ACCESS RAMPS => LOW APPROACH ANGLE Permissible gross weight: 40,000 kg Payload approx. 30,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Access ramps hot-dip galvanized Air suspension SAF axle with drum brakes EBS electronic braking system Tyres: 235/75R17.5 – 16 units Lowbed length approx. 7,160 mm Trough for excavator arm resting, approx. 3,000 x 730 x 180 mm at rear of lowbed 4 pairs of 10-ton recessed lashing rings in lowbed 2 pairs of 10-ton recessed lashing rings in raised deck 4 pairs of 3-ton lashing points on outer frame of lowbed 3 pairs of 6-ton lashing eyes on outer frame 4 pairs of stake pockets in outer frame of raised deck 4 pairs of stake pockets in outer frame of lowbed 3-meter widening kit with folding outriggers (flat, no slope) 4 x warning panels with lights Rotating beacon at rear LARGE STEEL STORAGE BOX under the loading area 2 storage compartments with hinged lids in raised deck Hydraulic ramp lifters 1-piece ramps, approx. 3,150 x 750 mm Softwood floor on loading area and ramps 40,000 kg GVW only with special permit as per Section 70 => Delivery freight costs: €2.90 plus VAT per km => Prices ex works D-86368 Gersthofen Your direct contact: Mr. Hauptmann Tel. DOLL Fahrzeugbau Fpedpfohvxgzjx Adqeg *Subject to prior sale and modifications!* *Price valid ex works D-86368 Gersthofen* *Sale to commercial customers only!* *Images may differ and are for general guidance only — may show/accessorise options available at extra cost*

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Fpsdpfx Asy Igu Dodqsg

Condition: used, empty load weight: 11,130 kg, maximum load weight: 36,870 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2019, suspension: air, tire size: 235/75 R 17,5 140J, color: other, gearing type: other, front tire size: 235/75 R 17,5 140J, rear tire size: 235/75 R 17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 4 x wheel recesses with covers, lashing rings, electro-hydraulic pump for ramps and supports, -- Printing errors, inaccuracies, and changes reserved, sample images --, More data at: !, More details: ! Fedpfjy Igvhex Adqopg

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,540 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 3,790 mm, Year of construction: 2026, Humbaur HTD 30 85 25 K 3-Axle Turntable Low Loader with Air Suspension, TPMS Tire Pressure Monitoring System, and 30,000 kg Gross Vehicle Weight. Professional heavy-duty low loader for daily use in construction, machinery, and heavy transport sectors. Its robust hot-dip galvanized design, SAF low loader axles, air suspension with lift and lower function, and high payload make it ideally suited for excavators, tracked vehicles, rollers, wheel loaders, or other heavy construction machinery. The lowered deck with inclined loading ramp, climbing strips, and heavy-duty steel ramps ensures comfortable and safe loading of various machines and vehicles. Features & Highlights: • SAF low loader axles • Air suspension with lifting and lowering function • TPMS tire pressure monitoring system • Twin tyres • EBS braking system with stability program • 3-axle turntable version • Heavy-duty welded chassis frame made from fine-grained steel • Chassis and turntable frame hot-dip galvanized • Low-maintenance ball race turntable • Lowered deck with inclined loading ramp • Climbing strips on loading ramp • 3m equipment package with folding outriggers • Painted/impregnated softwood floorboards • Lockable tool box under the loading area • Storage box at the front of the platform • Warning package and rotating beacon • 2 heavy-duty steel ramps • 3 pairs of recessed lashing rings (10 t) in the low deck • 2 pairs of recessed lashing rings (10 t) in the raised deck • 4 pairs of lashing points (3 t) on the outer frame • LED multi-chamber tail lights • LED side marker lights • 15-pin connector plug Technical Data: • Permissible gross weight: 30,000 kg • Payload: approx. 23,500 kg • Unladen weight: approx. 6,500 kg • Number of axles: 3 • Internal dimensions: approx. 8,540 x 2,540 mm • Lowered deck length: approx. 6,500 mm • Overall dimensions: approx. 10,760 x 2,540 x 3,790 mm • Loading height: approx. 890 mm • Tyres: 235/75 R17.5 • Ramp dimensions: 3,150 x 750 mm Ideal for: • Tracked excavators • Tracked vehicles • Rollers • Wheel loaders • Heavy construction machinery • Machinery and special transports -- Price ex stock Gersthofen. On request, handover ex stock Leer plus €1,000 net transfer costs. Fodoy H T Nropfx Adqspg Nationwide delivery directly to your door available for a surcharge of €2,000 net. Many other Humbaur heavy-duty trailers, low loaders, three-way tippers, and construction machinery transporters are permanently in stock and available at short notice. Feel free to contact us—we will check suitable models and equipment options directly for you. New equipment with VAT shown separately. Special equipment and individual modifications available on request. Please contact us for your personal offer. Errors, changes and prior sale excepted. Illustrations may differ. The vehicle may include optional special equipment at extra cost.

Condition: new, maximum load weight: 18,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, Gross weight: 24,000kg / 30,000kg Tare weight: 5,600kg Payload: 18,400 / 24,400kg Total length: 10,290mm Loading length: 5,900mm including rear incline Width: 2,520mm Loading height: 860mm Further information plus pre-carriage / preparation ex storage location 26639 Wiesmoor €1,280.00 / net Chassis Lowbed Trailer Steel welded construction Turntable with heavy-duty ball-bearing slewing ring Rear supports foldable 2 wheel chocks with holder Rear mudflaps across entire width (not compatible with forklift holder) 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Prepared for extensions to 3,000 mm (holes in outer frame with cover, not in the rear incline) Lashing points low loader 1 pair lashing cutouts in front longitudinal beam embedded in the goose neck, each 10t 7 pairs of lashing mushrooms recessed into the outer frame, each 10t (top and side) 1x at the front on the goose neck 5x in the lowbed 1x in the rear incline 12 pairs of lashing holes in the outer frame, 5t each (for securing straps) 5x on the goose neck, 6x lowbed, 1x rear incline Drawbar turntable coupling Drawbar with certified 40 mm towing eye Drawbar height adjustment by spring Axles & suspension Drum brake axles, according to manufacturer's choice "Axles/chassis laser-measured" to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker equalization) Wheels and tires 235/75 R 17.5'' manufacturer's selection Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 foolproof coupling heads at the front, with connecting lines to the towing vehicle, lines extended by approx. 60 cm without ABS, but with mechanical ALB, then max. 60 km/h approval Electrics 12 Volt, multi-chamber lamps, without side yellow LED lighting, side reflectors 2 white position lights at front 2 white/red marker lights at rear 1x 7-pole 12 Volt plug at front, with extension cable, extended by approx. 60 cm 1 LED beacon with holder, switched via parking light (removable beacon) 2 pairs of warning boards, illuminated and extendable to 3,000 mm Floor Gooseneck area with steel / checker plate covering Toolbox recessed into transition to goose neck then approx. 70 mm softwood floor, steel/checker plate covering in wheel arch area Rear incline with 70 mm softwood floor Lowbed area incl. rear incline 5,900 mm Loading ramps Fpsdpfx Aoynvrwjdqeg Steel ramps approx. 3,000 mm long, 750 mm wide, laterally slidable covered with wood (tip area steel/checker plate) Hydraulically operated via tractor PTO with throttle, control on driver’s side left Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operating instructions For 10,000 kg axle load, exemption required, indivisible load only!!! The specified gross weight is technically feasible, depending on cargo the gross weight may not be achievable due to axle/support/kingpin load limits. (Poor driving and tracking behavior due to incorrect load distribution possible) Country of registration / Plates Registration country: Germany with Dekra approval and certificate, for max. 60 km/h registration, towing vehicle LoF (agriculture/forestry), (Switzerland: max. 40 km/h possible) prepared for two-line license plate holder without contour marking / reflective tape per ECE R 048 Paintwork Frame hot-dip galvanized incl. passivation “15-year warranty against through corrosion” (text incomplete)

Condition: new, empty load weight: 10,650 kg, maximum load weight: 39,350 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 9,830 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 r17,5 zoll, Year of construction: 2026, Equipment: ABS, center pivot plate, 5-AXLE TURNTABLE LOW-LOADER HOT-DIP GALVANIZED => FULLY AIR-SUSPENDED => HOT-DIP GALVANIZED IN TOP - EQUIPMENT!!!! * AS LIFT AXLE Fodpfehmm Rcjx Adqjpg * AS SELF-STEERING AXLE -SAF - LOW LOADER AXLES -LIFT SPRING -1-PART LONG RAMPS -HYDRAULIC RAMP JACK -HYDRAULIC REAR STABILIZERS -HYDRAULIC SIDE SHIFT -HYDRAULIC SYSTEM UP TO 150 LITERS/MINUTE -EXCAVATOR STICK TROUGH -HOT-DIP GALVANIZED CHASSIS AND BOGIE FRAME -EXTERIOR FRAME ADDITIONALLY PAINTED IN RED DRIVE-ON RAMPS HOT-DIP GALVANIZED -10 to. LASHING POINTS RECESSED IN THE LOADING AREA -3 to. LOCKING POINTS IN THE EXTERIOR FRAME High plateau -6 to. LASHING POINTS IN THE OUTDOOR FRAME Low bed -4 pairs of lashing points 3 tons in the outer frame low bed -LASHING POINTS IN THE EXCAVATOR TROUGH -3 METER WIDENING PACKAGE -KLAPPAUSLEGER -WOODEN PLANKS IN THE STEEL BOX UNDER THE LOADING AREA -SECOND STEEL STOWAGE BOX UNDER THE LOADING AREA -WARNING TABLES -ROTATING BEACON AT THE REAR -CLIMBING RAILS AT THE REAR -2 STOWAGE BOXES IN THE HIGH PLATEAU -DIGITAL AXLE LOAD INDICATOR -WABCO-SMART-BOARD -AIR SUSPENSION -LIFT/LOWER VALVE AT THE REAR (REAR LOWERING FOR LOADING AND UNLOADING) -stake pockets in the outer frame -TWO STAKE POCKETS INCL. STANCHIONS ON THE FRONT SIDE -EBS - ELECTRONIC BRAKING SYSTEM B-DIMENSION = approx. 11,790 MM => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers! *Pictures may vary and are for rough orientation only => may include/show accessories at extra cost*

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Fpsdpey Rr Ihofx Adqog

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Fpedpfx Asy Izwyedqsg

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0: * EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes Fjdpjl Th Nnofx Adqjpg * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at the rear * Side underrun protection * Swing-down support legs at the rear of the chassis frame * Mechanically adjustable warning panel kits front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel splash guards, each fitted with spray protection * Reflective contour markings on the sides and rear * Toolbox made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED rear lights * Rotating beacon (removable) at the rear * Towing bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each also equipped with lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left and right on the main frame of the turntable platform, 6 pairs of UVV swing-down and retractable lashing rings, loadable in all directions and recessed in the outer frame – 13.4 t load capacity at the corners and 10 t elsewhere * 6 pairs of mechanical folding outriggers for a total width of 3 m (not on the rear chamfer) * Widening planks stored in the center of the loading area * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way valve block for retrofitting hydraulic side ramp shift * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, towing bar, and ramps hot-dip galvanized * Axles, springs, air reservoir, etc. painted in black * 235/75 R 17.5 twin tires * Curb weight approx. 5,980 kg * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from calendar week 11/2026

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning plate packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Side and rear reflective contour tape * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm Fpjdjl Th I Aspfx Adqsg * Hinged lid (hot-dip galvanized) for the tool box on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Coupling arm with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power connector * Four stake pockets per side (no stakes included), with integrated lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 6 pairs of swiveling and lowerable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stowed in the center of the loading platform * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, towing arm and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 11/2026

Condition: new, empty load weight: 120 kg, maximum load weight: 630 kg, overall weight: 750 kg, loading space length: 2,050 mm, loading space width: 1,095 mm, loading space height: 300 mm, loading space volume: 0.7 m³, color: other, construction height: 805 mm, working width: 1,545 mm, Manufacturer: Humbaur, Type: Steely low loader, Gross vehicle weight: 750 kg, Payload: 615 kg, Unladen weight: 135 kg, Box dimensions: 2050 x 1095 x 300 mm, Tires: 13 inch, Loading height: 495 mm, incl. 100 km/h approval, - 13-pin plug - 9 mm floor plate - Side walls made of hot-dip galvanized sheet steel - Tailgate with tension locks - 4 tie-down rings on the inside of the side walls - Pre-assembled fastening buttons for attaching the tarpaulin to the side walls - Humbaur multifunctional lighting integrated in the underride guard - Corner stanchions with insertion option - Folding V-drawbar Price incl. Vehicle registration certificate (registration certificate part II and COC papers), We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints, independent suspension, drop sides made of hot-dip galvanized sheet steel, unbraked, incl. warranty, 13-pin plug, 9 mm floor plate, tailgate with tension locks, 4 tie-down rings on the inside of the drop sides, pre-assembled fastening buttons for attaching the tarpaulin to the drop sides, Humbaur multifunctional lighting integrated in the underride guard, corner stanchions with insertion option, folding V-drawbar Fjded T Synspfx Adqepg

Condition: new, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, loading space length: 2,050 mm, loading space width: 1,095 mm, loading space height: 300 mm, loading space volume: 0.7 m³, color: other, construction height: 805 mm, working width: 1,545 mm, Manufacturer: Humbaur, Type: Steely DK low loader, Gross vehicle weight: 750 kg, Payload: 615 kg, Unladen weight: 135 kg, Box dimensions: 2050 x 1095 x 300 mm, Tires: 13 inch, Loading height: 495 mm, incl. 100 km/h approval, with folding drawbar Trailer can be positioned vertically against the wall in the garage - 13-pin plug - 9 mm base plate - Side walls made of hot-dip galvanized sheet steel - Tailgate with tension locks - 4 tie-down rings on the inside of the side walls - Pre-assembled fastening buttons for attaching tarpaulins to the side walls - Humbaur multifunctional lighting integrated in the underride guard - Corner stanchions with insertion option - Folding V-drawbar Price incl. Vehicle registration certificate (registration certificate part II and COC papers), We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints, independent suspension, drop sides made of hot-dip galvanized sheet steel, unbraked, incl. warranty, 13-pin plug, 9 mm floor plate, tailgate with tension locks, 4 tie-down rings on the inside of the drop sides, pre-assembled fastening buttons for attaching the tarpaulin to the drop sides, Humbaur multifunctional lighting integrated in the underride guard, corner stanchions with insertion option, folding V-drawbar Fedpfx Aeflw Scodqjpg

Condition: used, empty load weight: 8,680 kg, maximum load weight: 31,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2018, suspension: other, tire size: 235/75R17,5, color: other, gearing type: other, front tire size: 235/75R17,5, rear tire size: 235/75R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, ABS, widening with warning signs, vehicle is sold on behalf of., , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Fjdpfsy Irt Eex Adqepg

Condition: new, maximum load weight: 31,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,230 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 3,810 mm, Year of construction: 2026, Humbaur HTD 40 85 25 K 4-Axle Turntable Low Loader with Air Suspension and 40,000 kg Gross Vehicle Weight. Professional heavy-duty low loader for the highest demands in construction, machinery, and specialized transport. Thanks to its robust hot-dip galvanized construction, SAF low loader axles, air suspension with raise/lower function, and its enormous payload, it is ideally suited for large excavators, tracked vehicles, rollers, wheel loaders, or other heavy machinery. The lowered deck with drive-on slope, climbing strips, and heavy steel ramps allows for comfortable and safe loading of various construction machines and vehicles. Equipment & Highlights: • 4-axle turntable design • SAF low loader axles • Air suspension with lifting and lowering function • Twin tires • TPMS tire pressure monitoring system • EBS braking system with stability program • Heavy-duty welded chassis frame made from high-tensile steel • Chassis and turntable frame hot-dip galvanized • Low-maintenance ball-bearing slewing ring • Lowered deck with drive-on ramp Fpodsy H T N Sspfx Adqeg • Climbing strips on the ramp • 2 recessed toolboxes with lids • 3 coupling positions for the drawbar • Wheel recesses above the rear wheels • 2 storage compartments at the front of the platform • Excavator stick storage recess • Heavy-duty steel ramps • 3 pairs of recessed 10 t lashing rings in the low deck • 2 pairs of recessed 10 t lashing rings in the high deck • LED multi-chamber lights • LED side marker lights • 15-pin plug connection Technical Data: • Gross vehicle weight: 40,000 kg • Payload: approx. 31,500 kg • Tare weight: approx. 8,500 kg • Axles: 4 • Internal dimensions: approx. 9,230 x 2,540 mm • Low bed length: approx. 6,620 mm • Overall dimensions: approx. 11,200 x 2,540 x 3,810 mm • Loading height: approx. 890 mm • Tyres: 235/75 R17.5 • Ramp dimensions: 3,150 x 750 mm Ideally suited for: • Large tracked excavators • Tracked vehicles • Heavy rollers • Large wheel loaders • Special machinery • Heavy-duty and specialized transport ---Price ex works Gersthofen. Delivery from Leer location available upon request for an additional €1,000 net transfer fee. Germany-wide direct delivery to your door possible for a €2,000 net surcharge. Many more Humbaur heavy-duty trailers, low loaders, three-way tippers, and construction machine transporters are permanently in stock and available at short notice. Please do not hesitate to contact us – we will check suitable models and specifications directly for you. New equipment with VAT. Special equipment and individual modifications available upon request. Please contact us for your personal offer. Errors, changes and prior sale excepted. Images may differ. The vehicle may include optional equipment at extra cost.

Condition: new, empty load weight: 7,300 kg, maximum load weight: 26,700 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, anti-slip strip on the outside of the ramps and rear slope, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators, Surcharges for: last axle as steering axle: €3,500, warning signs + lighting and beacon: €200, widening to 3 m with timber inserts: €300, hydraulic ramp shifting: €1,000, -- Errors, misprints and changes excepted, sample images --, More data under: !, More Details: ! Fedpfx Aoy Rx Unodqopg

Condition: new, empty load weight: 6,870 kg, maximum load weight: 24,130 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: Hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, climbing strip on outside of ramps and rear slope, one-piece ramps with spring assist, loading height: 880 mm, incl. axle load indicators. Additional options: last axle as steering axle: €3,500, warning boards + lighting and beacon: €200, widening to 3 m with wooden inserts: €300. Also available with K80 drawbar eye! Subject to errors, misprints, and modifications. Sample images. More data at: ! Fjdpfxsy Rx T Rs Adqspg

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Surcharges: last axle as steering axle: €3,500; warning signs + lighting and beacon: €200; widening to 3m with wooden planks: €300; hydraulic ramp shift: €1,000. Also available with K80 towing eye! -- Errors, omissions and changes excepted, sample images -- More data at: !, More Details: ! Fjdpfx Adsy Rr Eysqspg

Condition: new, empty load weight: 6,950 kg, maximum load weight: 24,050 kg, overall weight: 31,000 kg, axle configuration: 3 axles, loading space length: 7,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, wooden floor 70 mm thick, 18 lashing rings, 12 stake pockets, 2 ramps each 3,110 mm long x 760 mm wide, hydraulic one-piece ramps, loading height: 880 mm, incl. axle load indicators. Surcharges: last axle as steering axle: €3,500; warning signs + lighting and beacon: €200; widening to 3m with wooden planks: €300; hydraulic ramp shift: €1,000. Also available with K80 towing eye! -- Errors, omissions and changes excepted, sample images -- More data at: !, More Details: ! Fpjdpfx Asy Rlifedqeg