Used Fliegl Szs 280 Jumbo Plateau for sale (1,553)

Condition: new, machine/vehicle number: 1acf251a278ec5cde4067a7b1, empty load weight: 5,800 kg, maximum load weight: 22,200 kg, overall weight: 28,000 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, saddle plate with replaceable 2 king pins Outer frame slightly slanted new design with Load-Lock profile for tensioning strap attachment 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Free support foot corner dimension or free swing radius to the rear approx. 1920 mm 2 wheel chocks with holder Aluminum side impact guard Steel underride guard Quarter-shell mudguards in front of and behind each axle 1 spare wheel holder for 1 e-wheel, with wheel fastening set 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Axles + suspension Fjdpfx Ajkv Uvzodqjpg Drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Floor Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / front corner stanchions 25 mm aluminum hollow profile, approx. 1 350 mm high, steel corner stanchions in volume design Approval country / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Attention! These are archive pictures!

Condition: new, machine/vehicle number: e7fbe178b85a202cade7e95af, empty load weight: 5 kg, maximum load weight: 22 kg, overall weight: 29 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis saddle forwarding Welded fine-grained steel construction, saddle plate with replaceable 2 king pins, with 2 king pin positions Slightly angled outer frame with load-lock profile for attaching lashing strapsNote! To attach the straps in conjunction with drop sides, the drop sides must be opened! 2 pairs of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the low bed, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminum side bumper Steel underride guard Quarter-shell mudguards in front of and behind axle unit 2 Stainless steel stowage box, w=600/h=400/t=500 mm, with polished door, lockable 2 pairs of stake pockets recessed in the outer frame on gooseneck, 70 x 40 mm internal dimensions 6 pairs of stanchion pockets in the outer frame recessed in the deep bed, 70 x 40 mm Fpodpfx Aei Ri Hvodqeg Internal dimension!!! Internal width between the stanchions 2420 mm!!! 3 lashing/stanchion rails in the drop-down bed, embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 2170 mm), approx. 100 mm high. With 20 mm round steel slats, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). For lashing and inserting stanchions 80 x 80 mm. Piece of stanchions W=80/ D=50/ L=1200 mm, hot-dip galvanized Piece of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, with support beam, can be loaded with 2000 kg over the entire width at the load center of gravity at approx. 500 mm, can be loaded with 1000 kg over the entire width at 1000 mm and can be loaded with 500 kg over the entire width at 1500 mm, incl. extendable underride guard with lighting, 2 pairs of stanchions W=80/ D=80/ L=1200 mm, hot-dip galvanized Open storage compartment for stanchions, on the front wall or underneath the loading area (for 10 stanchions 80 x 50 x 1200 mm and 4 stanchions 80 x 80 x 1200 mm) Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales). Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light 1

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2016, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Fedpfx Aoy Rxmwodqopg Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702019232, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 24,000 kg, axle configuration: 2 axles, first registration: 06/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Year of construction: 2016, The images provided are archive photos! The vehicle may currently be in use! 2-Axle Platform Semi-Trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Aggregate load capacity, permissible/technical: 16,000 kg Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis/Frame Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" king pin, with “Load-Lock profile” for lashing strap attachment, 14 pairs of lashing rings (2.5 t each), 24t, two-speed landing gear, one-sided operation, wheel chocks with holder, aluminium side underrun protection, hot-dip galvanized steel rear underrun guard, quarter-circle mudguards in front of and behind the axle assembly Axles & Suspension SAF small disc axles with disc brakes, air suspension Braking System 2-line compressed air braking system, spring-loaded parking brake, two fail-safe coupling heads at front, EBS, raising & lowering valve, Electronic Vehicle Stability Control System Note: This trailer may only be towed by tractors that guarantee effective ABS operation! Wheels and Tyres 385/55 R19.5", steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, yellow side LED lighting, two white front position lights, two white/red lane marker lights at rear, two 7-pin fail-safe sockets at front, without connecting cable Floor Birch plywood panels approx. 30 mm thick, with Omega inserts at cross joints, mounted on longitudinal supports for high point load capacity; suitable for forklift axle loads up to max. 7,100 kg Note: Floor swell due to weather conditions is possible! Front Wall/Corner Posts 25 mm aluminium hollow section, approx. 1,350 mm high, corner posts in steel, volume version, with “holes” for forklift drivers Registration / Signage With Dekra inspection and appraisal, 24/7 service hotline, prepared for single-line license plate holder, warning plate according to ECE-70, contour marking with reflective tape according to ECE R 048, white at sides, red at rear Fpjdpfxsy Rxl Hs Adqsg Paintwork Frame RAL 3002 carmine red, landing legs black coated Note: The images provided are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: Fuhrpark, empty load weight: 6,000 kg, maximum load weight: 20,000 kg, overall weight: 26,000 kg, axle configuration: 2 axles, first registration: 04/2018, tire size: 205 / 65 r 17,5, Further information Welded fine-grained steel construction, saddle plate with replaceable 2 king pins Reinforcer mounting point for gallows mounting and with sturdy grinding plates drum profile made of flat steel underneath the outer frame. Outer frame slightly inclined with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! Fpodemp Ug Djpfx Adqeg 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder, aluminum side bumpers, offset inwards as far as technically possible, steel underride guard, as much ground clearance as possible, quarter-shell mudguards in front of and behind each axle, suspension strip for aluminum ramps at the rear, plastic toolbox, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) SAF drum brake axles, with axle stopsAxle distance 1600 mm, air suspension with lifting & lowering valve 205 / 65 R 17.5, twin steel rims, factory silver 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable front coupling heads, without connecting cable, EBS, electronic brake system with EBS socket at the front, without connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 24 volt, multi-chamber lights, amber LED lighting integrated in outer frame profile at the side, offset inwards by approx. 25 mm, 10 lights per side 2 white position lights at the front, protected, 2 white/red lane departure lights at the rear, additional LED work light(s) at the rear, switched via reversing light 2 x 7-pin and 1 x 15-pin swap-proof sockets at the front, without connecting cable Screen printing plates approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Special floor installation: test of new profiles, without bolting Steel/checker plate covering in the wheel arch area, front wall/front stanchions, 25 mm aluminum hollow profile, approx. 800 mm high, steel corner stanchions in volume design, with viewing windows on both sides. Approval country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33901014232, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 2,638 mm, suspension: air, tire size: 235/75 R17,5, color: other, Year of construction: 2025, Chassis Saddle (Spedition configuration) Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin. Drivable and loadable with construction/agricultural machinery up to a maximum gross weight of 24,000 kg and for construction machine widths up to 2,480 mm (however, the track width of the machinery or vehicles to be transported must not exceed 2,200 mm). Rear-mounted hook-on bracket for aluminium ramps (wider construction/agricultural machinery may not be loaded). Outer frame, slightly angled, new version featuring "Load-Lock profile" for attaching tie-down straps. 14 pairs of recessed lashing rings in the outer frame, each rated to 2.5 t. 6 pairs of recessed lashing rings in the outer frame, each rated to 5 t. 24 t, 2-speed landing gear, single-side operation, with straight lower section, without compensation for push. Free landing gear corner dimension or free rear swing radius: approx. 1,920 mm. Foldable rear support. 2 wheel chocks with holders. Aluminium side underrun protection. Steel rear underrun protection. Quarter-shell mudguards in front of and behind each axle. With anti-spray mud flaps behind each axle. 1 spare wheel holder for 1 spare wheel including mounting set. 1 spare wheel, identical brand to primary tires, steel rim. Axles & suspension: SAF drum brake axles. "Axles/chassis laser measured" to reduce tyre wear and fuel consumption. Air suspension. 1st axle with automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting aid, no truck installation required (starting aid operates up to 30% axle overload and max. speed of 25 km/h). Brake system: 2-line compressed-air braking system. Color-coded wiring for easier maintenance. Spring-actuated parking brake. 2 non-interchangeable coupling heads at front (without connecting lines). 24 Volt EBS (Electronic Braking System) with EBS socket at front, no connection cable. Note: The trailer may only be towed by towing vehicles that guarantee the functionality of the ABS! Including lifting & lowering valve. Vehicle driving stability system. "TPMS" Tire Pressure Monitoring System according to ECE R 141, display through the towing vehicle via EBS, without truck installation (requirement must be present in the truck; only on standard tires). Wheels and tires: 12x 235/75 R17.5 twin tires. 12x steel rims, factory silver. Electrics: 24 Volt, multi-chamber lights, yellow LED side lighting. Yellow LED side lighting linked to indicator—flashing side marker lights. 2 white LED position lights at the front. 2 white/red lane marker lights at the rear. 2 x 7-pin non-interchangeable sockets at the front, without connection cable. Fjdpfx Ajxb D Swjdqopg Floor: Phenolic resin-coated plywood panels, approx. 30 mm thick, designed for high point load, suitable for forklift axle loads up to max. 5,600 kg. Front bulkhead / corner stanchions: 25 mm aluminium hollow profile, 1,350 mm high, corner stanchions in high-volume steel version. Bulkhead additionally fitted with 1,250 mm high phenolic resin-coated plywood panel on the inside.

Condition: new, machine/vehicle number: 3c70e9a5d82cfb3ada79baf95, empty load weight: 8 kg, maximum load weight: 17 kg, overall weight: 26 kg, axle configuration: 2 axles, tire size: 205 / 65 r 17,5, Further information Chassis semitrailer forwarding Welded fine-grained steel construction, fifth wheel plate with replaceable 2 kingpins, rear bevel to approx. 1920 mm, suspension bar for ramps at the rear and front on gooseneck, grinding rollers at the rear, drop center after cranking up to the axle unit. Drawing approval required from customer in case of order! Pair of lashing lugs at the top and side of the outer frame, 10 tons each Pair of lashing eyes embedded in the outer frame on gooseneck, 5 tons each 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support, mounted on the outside Wheel chocks with holder Aluminum side collision protection Steel underride guard for EG, if technically possible Quarter-shell mudguards with anti-spray flaps according to EG 1 pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, sloping towards the entrance. Length at bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on rear slope. Depth approx. 200 mm. Note! Frame in main beam area 200 mm higher than wheel recess. In the event of an order, a precise technical inspection is still required. Wheel recess cover can be pulled out from the drop deck with hardwood inserts, on rear slope with hardwood inserts. Electric cable winch, 24 volt, pulling force 5500 kg, mounted in the offset gooseneck, not reaching into the loading area, operation with radio remote control, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller on rear slope. Axles + suspension SAF or BPW drum brake axles of our choice Air suspension with lift & lower valve + auto-reset function Wheels and tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 to tire load capacity at max. 90 km/h at the manufacturer's discretion Twin steel rims, factory silver Fsdoi Ri Hropfx Adqjpg Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Haldex, electronic brake system with EBS socket at the front, without connecting cable (sent to the customer for approval brake calculation.15.07.2021) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for display via display in the cab, truck must be prepared accordingly, no truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering 30 mm screen-printed floor, in the drop floor between the longitudinal beams in the middleIn the tramline area covered with toothed grating in the wheel recesses with steel/checker plate covering. Access ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for entering the drop deck Pair of steel ramps for crossing on gooseneck Drop sides Approval / plates Country of approval: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Contour markings with reflective strips to ECE R 048, yellow at the sides and red at the rear Warning sign according to ECE -

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Fpedoy Niuispfx Adqjg

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fodpfxsy Nitrs Adqjpg

Condition: used, maximum load weight: 23,730 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 04/2022, Sliding tarp left/right, sliding roof, EcoLift lifting roof approx. 380 mm raisable, AAC Basic, toolbox, SAF landing gears, fire extinguisher holder, colour grey Fedpfxeyf Sy Sj Adqepg

Condition: used, functionality: limited functionality, empty load weight: 6,575 kg, overall weight: 35,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2011, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5, tire condition: 30 %, wheelbase: 1,360 mm, Year of construction: 2011, Equipment: ABS, Used open semi-trailer Steel front wall with recess for long steel bars Floor reinforced with steel profiles Side pockets for stanchions Storage box for plug-in stanchions Fpedoy Ercbepfx Adqog

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, The images shown are archive photos. Further Information Chassis Center Axle Trailer Fine-grain steel welded construction Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Folding rear support 2 wheel chocks with holders Steel underrun protection, galvanized Quarter shell mudguards 1 plastic toolbox with shelf, dimensions: w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 open storage compartment for insert stakes, located under the loading area 4 pairs of stake pockets integrated into the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centered in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of insertable stakes, B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets/insert stakes are not designed for securing long loads, pipes, etc. by themselves without additional lashing Tandem trailer coupling Drawbar with certified 40 mm towing eye Drawbar mechanically adjustable in length 4 x 500 mm, from 1800 to 3800 mm, set to 1800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes Laser-measured axles/running gear to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line air brake system Spring-loaded parking brake Integral air tanks 2 non-interchangeable trailer couplings at the front with connecting lines to the truck ABS and ALB, with ABS plug at the front with connecting cable Caution: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front Fpsdei Ri H Djpfx Adqog 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Floor About 30 mm thick phenolic plywood, designed for high point loads Note: Warping of the floor possible due to weather conditions! Platform length approx. 6,200 mm Operating Notes The specified gross weight is technically feasible; depending on the type of cargo, the gross weight may not be achievable in compliance with permissible axle, support, and saddle loads. Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame color: DB 7350 Nova Grey Attention: Archive photos!

Condition: used, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, tire size: 445/45 r19,5, Year of construction: 2014, Further information Fine-grained steel welded construction 1 gear support foot at the front, with straight lower section and single-sided operation in FR right Wheel chocks with holder, aluminum side bumpers, steel underride guard Half-shell mudguards protrude slightly over the main frame, bumpers at the rear Tandem trailer towing device Towbar with tested 50 mm towing eye, forwarding agent version, under-coupler towbar Axles + suspension BPW disc brake axles, manufacturer's choice Fsdponi Udzsfx Adqjpg Air suspension with lift & lower valve Wheels and tires 445 / 45 R 19.5, manufacturer's choice, steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake, Duomatic connection at the front, with connecting cable to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable Make Haldex, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Floor: Platform length approx. 7,300 mm, screen-printed floor Front wall: aluminum approx. 1,200 mm, steel corner stanchions in volume design Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin plug at the front, with connecting cable Approval / plates Country of registration: Germany, with Dekra approval and certificate 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT22001011091, empty load weight: 5,340 kg, maximum load weight: 12,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2021, tire size: 235/75 r17,5, Year of construction: 2021, Further information Chassis Central axle trailer Fine-grain steel welded construction Type TPS 200 (special permit required) Fpsdpfx Aop N Dgusdqjg Gear support leg at front Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear mudflap Mudflaps in front of each axle and anti-spray mudflaps behind each axle 1x spare wheel holder for 1 spare wheel, with wheel mounting kit 1x spare wheel, brand same as original tires, steel rim 1x stainless steel toolbox, b=600/h=400/d=500 mm, with polished, lockable door Low-loader lashing rings 5 pairs of stake pockets recessed in outer frame, inner dimensions 70 x 40 mm (convertible to 5 t ring lashing eyes, not included) 7 pairs of lashing mushrooms recessed on top and side in outer frame, each rated at 10 t 2 additional pairs of folding lashing rings recessed in low-bed area, each rated at 10 t (1 pair at the front and 1 pair in rear slope) Central axle trailer drawbar Drawbar with certified 50 mm towing eye Axles & suspension SAF drum brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Axle spacing 1810 mm (allows 10 t axle load, technical) Air suspension Brake system 2-line compressed air brake system, color-coded for easy service Spring-actuated parking brake Duomatic connection at front with connecting line to the towing vehicle EBS, electronic brake system with EBS plug at front and connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN-bus signal for display in cab, truck must be pre-equipped, no truck installation (no calibrated scale) Wheels and tires 235/75 R17.5 Fulda brand Steel rims, factory silver Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 1 x 15-pin plug at front with connection cable 1 additional LED work light at rear, switched via reverse light 1x LED beacon with holder, controlled via parking light (removable beacon) Floor 70 mm softwood floor, in wheel arch area with steel/chequer plate covering Rear slope with Mega Grip surface made of serrated grating Low-loading platform including rear slope: 6500 mm Front bulkhead / corner posts 25 mm aluminum hollow section, 400 mm high, detachable Ramps Steel ramps, 3600 mm long, 750 mm wide, split with cable pull extension, laterally adjustable Ramp spacing, minimum gap approx. 600 mm, maximum outside width approx. 2880 mm Ramp surface with Mega Grip made of serrated grating Hydraulic operation via own electrohydraulic unit mounted in steel box; operation on right side of vehicle. Note: NATO socket with connection cable on truck required. Connection cable must not be connected while driving! Hydraulic lateral displacement of ramps, individually controllable (only in combination with hydraulic ramp operation)

Condition: used, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 06/2014, Equipment: ABS, Visit our website, where you will find our complete vehicle inventory with many more photos and information in multiple languages. SEL 7566 Fliegl SZS 270 German registration / single owner First registration: 24.06.2014 Technical gross weight (kg): 27,000 Permitted total weight (kg): 25,000 Curb weight (kg): 5,100 VIN: WFDFLT22701003772 TIRES AND AXLES: Tires: 205/65 R 17.5 Axle configuration: 2 SAF axles Air suspension Drum brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 9.21 + Side panel height (m): 0.58 VEHICLE DOCUMENTS: Registration certificate (Schein) Vehicle title (Brief) German vehicle approval form M. BUFANO m. (Italiano, English, Deutsch) Fsdpfex Ep Eyex Adqjpg J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosnian) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot be held liable for any errors or omissions. We kindly request that our customers consult the available photos. The specified dimensions are approximate values. Our vehicles are sold as-is, in their current condition. We invite customers to visit our facility to personally inspect the vehicle’s condition. Furthermore, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer prefers new batteries, we are happy to provide pricing information.

Condition: new, axle configuration: 3 axles, color: grey-black, gearing type: mechanical, Colour natural, lifting axle, electronic braking system EBS, connection plug 1x15-pin, equipment outer frame slightly slanted, new version with "Load-Lock profile" for attaching tensioning belts, 13 pairs of lashing eyes additionally in the outer frame, each 5 to 24 tonnes. 2-speed support winch, one-sided operation, with semi-circular lower section and straight forklift ram protection made of steel on the outer frame on the side. and rear 1 spare wheel holder for 1 electric bike, with wheel fastening kit 1 plastic tool box 650mmx520mmx670mm 7 pairs of stake pockets embedded in the outer frame, 83 x 83 mm SAF disc brake axles with 430 mm air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes Wheels and tires 6 385/65 R22.5" Make 6 steel rims, factory silver Floor screen-printed panels approx. 30 mm thick, cross joints with omega insert, for high point load capacity for forklift axle load up to max. 7 100 kg Front wall / corner stanchions front 25 mm aluminum hollow profile, 1 950 mm high, corner stanchions steel in volume design + 2 center supports "crash blocker", bottom inside at approx. 140 mm height Side walls 25 mm aluminum hollow profile, 700 mm high Paintwork frame hot-dip galvanized including passivation "15 year guarantee against rust through" side walls ALU anodized, errors and changes reserved. Fpsdpotcwmiefx Adqjg

Condition: new, maximum load weight: 23,340 kg, overall weight: 30,000 kg, axle configuration: 3 axles, NEW VEHICLE Fliegl 3 axle platform low loader DTL - S - 300 Agrar, frame and chassis hot-dip galvanized Total weight: 24,000 kg / 30,000 kg Payload: 17,340 kg / 23,340 kg Fpodpfsllwhnox Adqog Empty weight: 6,660 kg Total length: 11,625 mm Platform length: 9,000 mm including 900 mm approach slope Loading height: 900 mm Large lashing package Draw fork 40 mm Tires 235 / 75 R 17.5" twin Without ABS, max. 60 km/h approval Electrical system 12 volt, LED rotating beacon Ramps with spring lift, ramp length 2,800 mm Vehicle from ongoing production - approx. 14 days in advance. Plus Pre-freight / provision from the Wiesmoor storage facility 1,280.00 ¤/ net Towing vehicle LoF, agricultural or forestry registration Rent-purchase offer: term 48 months, residual value 40%, down payment only VAT monthly rate: 599.00

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total width: 2,550 mm, Total weight: 18,000kg/ 21,000kg Empty weight: 4,800kg Payload: 13,200kg/ 16,200kg Total length: 9,450mm Loading length: 7,500mm including rear bevel Width: 2,520mm Loading height: 860mm Further information - Frame painted in stock color Nova gray - Wooden floor 70 mm - Steel ramps 2,800mm long x 750mm wide, can be moved sideways - With spring jack support - Folding rear support - Aluminum side impact protection - Plastic tool box - Widening package 3m - Large lashing package - 5 pairs of ring lashing eyes embedded in the outer frame (can be converted to stake pockets), 5 tons each, 7 pairs of lashing mushrooms embedded at the top and side of the outer frame, each 10 ton. - 50mm towing eye - Air suspension - Raise & lower valve - Axle load detection via EBS-Canbus signal - Tires 235/75R17.5 - 2 x 7-pin connector at the front - LED rotating beacon - 2 pairs of warning signs with double LED lighting, extendable 3m Fsdpsr Da Uvofx Adqjpg plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: new, maximum load weight: 8,665 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 910 mm, total width: 2,550 mm, NEW VEHICLE Fliegl Tandem Trailer for Timber Transport with Stakes, Model TPS 118 Holz Total weight: 11,800 kg Unladen weight: 3,135 kg Payload: 8,665 kg Overall length: 8,350 mm Loading length: 6,200 mm Width: 2,550 mm Loading height: 910 mm Additional information plus freight/handling ex stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: Central axle trailer Fine-grained steel welded construction Outer frame slightly sloped with "Load-Lock profile" for attaching lashing straps Front telescopic support leg Folding rear support 1 plastic toolbox, width = 600 / height = 425 / depth = 460 mm, lockable Open storage compartment for stake inserts under the loading platform 4 pairs of stake pockets recessed in the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centrally recessed in the floor, reinforced to the main frame, 83 x 83 mm internal dimensions 6 pairs of insertable stakes B = 80 / D = 80 / L = 2,000 mm, hot-dip galvanized Note: Stake pockets/inserts are not suitable for securing long materials, pipes, etc. without additional lashing Side underrun protection aluminium Tandem trailer towing assembly Drawbar with certified 40 mm towing eye Drawbar mechanically adjustable by 4 x 500 mm within 1,800 - 3,800 mm, standard drawbar set to 1,800 mm (Note! Observe load distribution and drawbar load) Axles & Suspension GFA or BPW axles, manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle equalization (rocker balancing) Fsdow N U I Hopfx Adqopg Wheels and Tires 235 / 75 R 17.5" Steel rims, factory silver Braking System 2-line compressed air brake system Spring-loaded parking brake Integrated air reservoir 2 non-interchangeable coupling heads at the front, with connection lines to the truck ABS and ALB, with front ABS plug, including connection cable Attention: This trailer may only be towed by towing vehicles capable of ensuring full ABS function! Electrics 24 Volt, LED multi-chamber rear lamps, lateral amber LED lamps, LED license plate light (note: With some towing vehicles, false diagnostics may appear even if lighting functions are correct) 2 front white LED position lamps 2 rear white/red lane marker LED lamps 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Antislip plywood, approx. 30 mm thick, designed for high point loads Note: Floor waviness is possible due to environmental impacts! Platform length approx. 6,200 mm Operating Notes The total permissible weight given is technically possible, but depending on load, actual usage may be limited by max. axle, drawbar, or kingpin loads. Special permit required if total towing length exceeds 18,750 mm. National regulations must be observed. Registration / Plates Registration country: Germany With DEKRA inspection and certificate 24/7 service hotline Prepared for single-line license plate holder Outline marking with ECE R 048 reflective tape, white sides and red rear Paintwork Chassis hot-dip galvanized including passivation "15-year corrosion warranty" Note: Floor warping can occur due to hot-dip galvanization! Vehicle from current production – delivery time approx. 2–3 weeks.

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Fjdpfxsi Ri Szs Adqopg Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Condition: new, machine/vehicle number: 56c59c8aba35227ffb44c9f75, empty load weight: 11,350 kg, maximum load weight: 26,650 kg, overall weight: 38,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis Jumbo semi-trailer Welded steel construction with narrow cross member spacing and reinforced design, low loader external frame profile, for transporting construction machinery up to 32000 kg and up to a max. external width of the construction machinery of 2550 mm, fifth wheel plate with replaceable 2 king pins. Rear inclination to approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/checker plate, Fpjdpfxji Riw Ao Adqog In the low bed Omega rail on the side at the bottom of the outer frame as a suspension strip for tarpaulin and spacer for the lashing points, not in the wheel area. With lift table on an additional fixed lightweight outer frame with omega profile, lift table can then be raised with closed tarpaulin! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation, free swing radius to the rear approx. 1950 mm, Folding rear support 2 wheel chocks with holder Aluminum side bumpers Quarter-shell mudguards in front of and behind each axle With anti-spray flaps behind each axle Steel underride guard Rear spray flaps across the entire width 4 stainless steel storage box, w=800/h=350/t=350 mm, with polished door, lockable 2 x in FR-left and 2 x in FR-right in front of the 1st axle Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically for transfer to gooseneck, with mechanical locking when raised. (inclined cylinder for good ground clearance, Fliegl standard). Operation in FR-right + additional operation with radio remote control (same as ramp operation) Lifting table can be raised with closed tarpaulin! Tarpaulin suspension in the lift table area on an additional fixed lightweight outer frame with Omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms can also be used when lowered! Lashing eyes Gooseneck: 4 pairs of 5 to lashing eyes embedded in the outer frame 2 pairs of lashing points at the top and sides of the outer frameLow bed 8 pairs of lashing mushrooms at the top and sides of the outer frame, each 10 tons 9 pairs of 5to embedded in the outer frame Axles+suspension SAF drum brake axles last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lift & lower valve + auto-reset function H & S function with quick air release 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Wheels and tires 235 / 75 R 17,5 from leading manufacturers Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front, in LED 2 white/red lane departure lights at the rear, 1 rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illum

Condition: new, machine/vehicle number: 207ad28f83705ed0d38a4f174, empty load weight: 3 kg, maximum load weight: 11 kg, overall weight: 14 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis Wechel central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 flush with rear (for 7.15 swap bodies not flush with rear, forklift pockets/frame protrude) Telescopic front support leg 1 pair of front gear support legs, with straight lower section and single-sided operation in FR right Wheel chocks with holder Aluminum side bumpers Steel underride guard Half-shell mudguards Bracket for truck-mounted forklift at the rear, including 2 fork pockets, 2 extendable support tubes, bracket for chain safety device with pin. Underride guard with light unit can be folded away. Including 2 loose rubbers to protect the rear wall, we recommend counterweight! Partially low ground clearance with forklift, poor tracking behavior possible, without warranty! (Forklift tare weight up to max. 1500 kg for trailers). (With proximity switch for forklift control in conjunction with lift axle)The axles are shifted to the rear by the forklift bracket, observe load distribution when driving without forklift. Customer risk! (For swap body trailers, driving with a forklift is only permitted in conjunction with a swap body) Forklift bracket as AU 203670 adapted to 7.45 m swap bodies Counterweight at the front between the frames, approx. 300 kg, if necessary, exact check still required Towing device central axle trailer Tow bar with tested 50 mm towing eye, forwarding agent version (not suitable for trucks with tail lift, or exact testing still required if ordered) Lower coupler drawbar without length adjustment drawbar Axles + suspension SAF drum brake axles of the manufacturer's choice Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-applied parking brake Duomatic connection at the front, with connection line to the engine trolley, in FR-left Duomatic connection at the front, with connection line to the motor vehicle, connection in FR-right EBS, electronic brake system with EBS plug at the front, with connecting cable, in FR-left Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in each case in lowering / lifting position Vehicle - driving stability system Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, 4 x 3 chamber lights + 1 round reversing light and + 1 round rear fog light, amber LED lighting on the side, lights mounted in a protected position! Fodpfx Adei Ri Iaeqopg 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin plug at the front, with connecting cable, in FR-left 2 x 7-pin sockets in FR left rear for truck-mounted forklift 1 x 15-pin socket in FR left rear for truck-mounted forklift LED work lights on both sides behind the 2nd axle (switched via reversing light) Additional LED work light(s) at the rear, switched via reversing light Approval / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame

Condition: new, machine/vehicle number: 06017a31026c05fc8f6ccf5ae, empty load weight: 3,055 kg, maximum load weight: 14,945 kg, overall weight: 18,000 kg, axle configuration: 2 axles, tire size: 235/75 r17,5, Further information Chassis Changing turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with sturdy ball bearing slewing ring 2 wheel chocks with holder Aluminum side bumper Steel underride guard Quarter-shell mudguards at the front and half-shell mudguards at the rear Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake systemColor-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the motor vehicle, EBS, electronic braking system with EBS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve, holding function in both lowering and lifting position Wheels and tires 235/75 R17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights in LED with resistor, amber LED lighting at the side, license plate lighting in LED, (Note! with certain towing vehicles, misdiagnosis may occur although the function is given) 2 white front position lights in LED 2 white/red rear lane departure lights in LED 1 x 15-pin plug at the front, with connecting cable, Additional LED work light(s) at the rear, switched via reversing light Approval / plates Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Fpedpfxoi Ri Rcj Adqog Paint finish Frame DB 7350 nova gray Attention: Archive pictures!

Condition: new, machine/vehicle number: c13a96854ea37997845c1bf36, empty load weight: 6,860 kg, maximum load weight: 28,140 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 235/75 17,5, Further information Chassis saddle forwarding Fine-grained steel welded construction, fifth wheel plate with replaceable 2 king pins Suspension strip for feeder ramps on the rear extension across the entire width, outer edge chamfered to prevent damage. Frame in reinforced design for vehicle loading (up to outer frame) Outer frame with Load-Lock profile approx. every 400 mm, for lashing strap attachment Fpedpfx Adslf Dtmjqog 10 pairs of lashing mushrooms embedded in the top/outside of the outer frame, 10 tons each, starting from the neck area 24 t. 2-speed support winch, single-side operation, with straight connecting plate 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Sheet metal as splash guard riveted to the floor at the bottom, in the neck area above the axle of the SZM and above the axle unit Half-shell mudguards with anti-spray flaps according to EG Container locking, 4 pairs of locking cut-outs embedded in the floor for 2 x 20 foot or 1 x 40 foot containers, 4 pairs of container locking adapters, (additional cross support required at the front and rear of the container, the container must rest evenly across the width in conjunction with the locks, cross supports are not included in the scope of delivery) Caution! Damage to the Lohrblech floor by the cross supports possible! Mechanical rear extension with hand crank, can be extended by approx. 1,500 mm, can be locked every 500 mm, incl. extendable underride guard with lighting, (then no access ladder at the rear) Covered with Lohr plate in the tramline area, steel checker plate in the middle. Attention! Ramp loading via rear only possible with rear extension in retracted position! Storage space for access ramps integrated in rear extension, can only be used if rear extension is extended 1000 mm - then excess length For transporting the ramps with the rear extension retracted - Storage space for ramps in FR on the right in front of the axles 1 pair of ramps 3,000 mm long, 300 mm wide, load capacity per pair 6,000 kg, (suspension bar for ramps on rear extension) Rear sloping to approx. 500 mm Electric cable winch, 24 volt, pulling force approx. 8165 kg, mounted centrally at the front, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller rope window and removable guide rollers Axles + suspension Drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) with central lift arm Axle lift below the recomm. Driving height, therefore no warranty for tire damage Brake system 2-line compressed air brake system Colored line routing for easy service. Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 235/75 17.5 tires of the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white LED position lights at the front 2 white/red rear lane departure lights 2 additional LED work lights at the rear, switched via reversing

Condition: new, machine/vehicle number: d24246f092ae53c0e155d19dd, empty load weight: 2,400 kg, maximum load weight: 13,600 kg, overall weight: 16,000 kg, Further information Fjdpskt Ni Usfx Adqopg Chassis tandem trailer Welded steel construction with approx. 152 mm high floor assembly, load-oriented and torsion-resistant steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and with guide tunnel at 600 mm intervals, tunnel with guide at the top and sides, tunnel height approx. 45 mm, 4 x swap body corner fittings on 20ft base. 4 x support legs for Jumbo parking height 970 mm, extendable and foldable sideways by 90° with short safety strut and safety catch, bolt safety catch on the frame, stable drop latch as second transport safety catch, -symmetrical arrangement of support legs form A 2 for CWB C 745 / 782 for parking height of approx. 970 mm Reinforcement between the support legs 7 pairs of lashing eyes embedded in the outer frame, 2.5 tons each Heavy-duty pallet stop on both sides, approx. 20 - 25 mm high, with lashing option every 200 mm, loading height reduced by approx. 20 - 25 mm Door stop on the side Impact protection at the rear made of flat iron Floor Screen printing plates approx. 27 or 30 mm thick, manufacturer's choice, for high point load capacity, for forklift axle load up to max. 4400 kg Front wall/front stanchions 2,800 mm high, rest with tarpaulin, steel corner stanchions in volume design, release device for side tarpaulin on front wall Center stanchions 1 pair of sliding stanchions can be moved along the entire length, with 4 insertion pockets and a long pocket at the bottom. Insertion slats 3 rows of aluminum V-insertion slats or wooden insertion slats of the manufacturer's choice, 1 additional row/rows of aluminum V-slats Rear wall/rear stanchions Rear corner stanchions, steel up to lower edge of roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal espagnolette locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Stainless steel tension locks Roof Sliding roof, rear end lift can be folded up, with roof can be pushed from rear to front, L-shaped roof rail for automotive industry, internal width between the roof rails approx. 2,490 mm, tarpaulin color: white EcoLift - lifting roof can be raised by approx. 380 mm, with gas pressure damper support, Approval / plates Country of approval: Germany Manufacturer's certificate in accordance with EN 12642 XL Paint finish Hot-dip galvanized frame Front corner stanchions hot-dip galvanized Front wall aluminum Rear corner stanchions Hot-dip galvanized Rear wall white Tarpaulin RAL 9005 jet black with advertising lettering Attention! These are archive pictures.