Used Fliegl Fliegl Tsk 100 4,5M for sale (7,929)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Isdpfx Aaei Ri Eie Hoia Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: new, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus pre-transport / provision ex warehouse location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded structure, continuous tipping shaft at the rear with 80 mm ball bearing Support leg with gear at the front Foldable rear support 2 wheel chocks with holders Steel underride guard Full-width rear mudflaps (not in combination with forklift mounting) Quarter-section mudguards Iisdpfx Aoy Dzlisa Hoa 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable (lock not included) Note! The sideboard touches the storage box when folded down. Lockable compartment for loading ramps under the cargo bed Drawbar system for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles at manufacturer’s choice, with tapered roller bearings and S-cam brakes “Axle/chassis laser alignment” for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" as per manufacturer’s choice Steel rims in factory silver Braking System 2-line compressed air braking system Color-coded lines for easy servicing Hand spindle parking brake 24 Volt ABS and ALB, ABS connector at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure ABS functionality! 2 mistake-proof coupling heads at the front, with connection lines to the truck Electrics 12 to 24 Volts, multi-chamber LED lights, side yellow LED marker lights, license plate lighting in LED (Note! Certain towing vehicles may display diagnostic errors even if functionality is correct) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin mistake-proof plugs at the front, with connection cable 1 additional LED work lamp at rear, activated by reverse light Hydraulics Three-way tipping system, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If required, this must be retrofitted to the truck (trucks with max. hydraulic pumping capacity of 55 l/min) Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Tipper Platform Robust tipper platform with 4 mm steel floor, steel sides, continuous and foldable and swinging sideboards with central locking at the bottom. Removable corner posts at the rear. Drop-down and swinging tailgate, with central locking at the bottom. Platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom. Sideboard retracting springs (not available with foldable front wall) Platform width 2,420 mm 3 pairs of lashing eyes on floor, each rated for 5 t Operating Instructions The specified gross weight is technically possible. Depending on cargo, the gross weight may not be achievable while adhering to permitted axle, support, and kingpin loads. (Poor driving and trailing behavior can result from improper load distribution) Country of Registration / Plates Registered in: Germany With Dekra inspection and certificate (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation "15 years warranty against corrosion through rust" Sideboard/Platform in RAL

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus pre-carriage / provision from storage location 26639 Wiesmoor €1,280.00 net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tipping bearing Support leg with gear at the front Foldable rear support 2 wheel chocks with holders Steel underrun protection Full-width rear mudflaps Quarter-shell fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Note! Sidewall touches the toolbox when folded down. Lockable storage space for loading ramps beneath the loading area WITHOUT ramps Drawbar for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & Suspension BPW drum brake axles "Chassis/undercarriage laser-aligned" to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tyres 235 / 75 R 17.5" manufacturer’s choice Steel rims, factory silver Brake System 2-line air brake system Color-coded line routing for easy service Hand spindle parking brake Integral air tank ABS and ALB, with ABS connector at the front and connection cable Caution: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 non-interchangeable coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lighting, side yellow LED marker lights 2 white position lights at the front 2 white/red lane lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Hydraulics Three-way tipping system, hydraulic multi-piston cylinder with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, needs to be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operated hydraulically via truck PTO Tipping Platform Robust tipping platform with 4 mm steel floor, steel sidewall construction, continuous, fold-down sidewalls Non-swing mounted without central locking underneath. Plug-in corner posts at the rear. Rear wall fold-down and swing-mounted, central locking underneath. Platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom Sidewall retracting springs (not possible with split sidewalls) Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated to 5 tons Operating Notes The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while observing permissible axle/support/kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution) Approval/Country Country of registration: Germany with Dekra inspection and certificate (in accordance with §13 EC-FGV) 24/7 service hotline Iedpfx Aoy Dzlcea Hsia Prepared for single-line number plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation "15-year guarantee against rust-through" Sidewalls/platform RAL 5002 ultramarine blue Note! Platform inside is only primed unless otherwise painted bridge design! Optional loading ramps €1,280.00 net

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus delivery/preparation from storage location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Front support leg with gearbox Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter shell fenders 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Note! Sidewall touches the storage box when folded down. Lockable storage compartment for loading ramps underneath the loading area Central axle trailer drawbar arrangement Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, adjustment range max. 300 mm Axles/Suspension GFA drum brake axles "Axle / Chassis laser measured" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" manufacturer's choice Factory silver steel rims Braking System 2-line air brake system Color-coded line routing for easy servicing Manual spindle-operated parking brake ABS and ALB, with ABS plug at front and connection cable Attention: The trailer may only be towed by tow vehicles that ensure the operation of the ABS system! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red lane control lights at rear 2 x 7-pin foolproof plugs at front, with connection cable Hydraulics Three-way tipper, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, retrofit on truck. Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Tipper Body Sturdy tipper body with 4 mm steel floor, steel sidewalls, sides continuous, foldable and hung on pivots with central locking on bottom. Rear corner posts insertable. Rear wall foldable and hung on pivots, with central locking on bottom. Body length approx. 5,000 mm, sidewalls with 6 bottom hinges. Sidewall return springs (not available with split sidewalls) Body width 2,420 mm 5 pairs of lashing rings in floor, each rated to 5 tons Operating Notes The stated gross vehicle weight is technically possible, but depending on the type of load, the total weight may not be achieved when adhering to permitted axle / support / saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany Iijdpfxsy Dzk Ee Aa Hja with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with reflective strips according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Sidewall/body RAL 9005 deep black Optional: Drive-on ramps €1,280.00 / net

Condition: used, maximum load weight: 8,470 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 06/2018, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,800 kg Unladen weight: 3,330 kg Payload: 8,470 kg Overall length: 6,950 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,420 mm Loading height: approx. 950 mm Further information: - Front support leg - Rear support, foldable Isdoy Arkaepfx Aa Heia - 450 mm drop sides - Large lashing package - Frame hot-dip galvanized incl. passivation - Loading ramps optional: €1,280.00

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75 r17,5, color: red, The images are archive images; the vehicle may still be in use! Further information Steel welded construction, continuous tilt shaft at the rear with 80 mm ball bearings Front transmission support leg, folding rear support, 2 wheel chocks with brackets, steel underride guard, full-width rear mud flaps, quarter-shell fenders, spare wheel, same make as base tire, steel rim, loose, 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note! The side panel touches the storage compartment when folded down. ``` Lockable storage space for loading ramps beneath the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair: 8,000 kg (rear ramp attachment bar). Towbar with tested 40 mm towing eye, towbar height adjustable via spindle, max. adjustment range: 300 mm. BPW drum brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). Dual-line pneumatic brake system. Color-coded cable routing for easy servicing. Manual spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connecting cable. Caution: The trailer may only be towed by towing vehicles that ensure the ABS is effective. 2 interchangeable coupling heads at the front, with connecting cables to the towing vehicle. Isdpfxjlhpzvj Aa Hsia 24-volt multi-chamber lights, yellow LED side lighting, 2 white position lights at the front. 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable connectors at the front, with connecting cable. Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose. Hydraulic operation via the truck's PTO. Sturdy tipping body with 4 mm sheet steel floor, steel side wall construction, continuous side walls, foldable and pivoting with central locking at the bottom. Rear corner stanchions are pluggable. The rear wall is foldable and pivots, with central locking at the bottom. Bedside length approx. 5,000 mm, side walls with 6 hinges at the bottom, bed width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with DEKRA approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for a single-line license plate holder, contour markings with reflective stripes according to ECE R 048, white on the sides and red on the rear

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201012268, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 05/2022, loading space length: 5,000 mm, loading space width: 2,420 mm, tire size: 235/75 r17,5, color: green, operation weight: 3,240 kg, Further information Welded steel construction, continuous tilting shaft at the rear with 80 mm ball tilting bearing, gear support foot at the front, folding rear support, wheel chocks with holder, steel underride guard, rear spray flaps across the entire width (not in conjunction with forklift bracket), quarter-shell mudguards, spare wheel, same make as basic tires, steel rim, loose, plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery)Note! Dropside touches storage box when folded down, lockable storage space for access ramps underneath the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (suspension bar for ramps at the rear) Iodek E Tdaepfx Aa Hjia Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 300 mm BPW drum brake axles, laser-measured axle/chassis Reduction in tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) 2-line compressed air brake systemColor-coded cable routing for easy servicing, hand spindle parking brake Integral air reservoir, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connecting cable to the motor vehicle 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck, hydraulic connection with SVK plug NW 10/3, incl. connecting hose, hydraulic actuation via truck power take-off Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, 5 tons each. Operating instructions: The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions Iodpfx Aaoqmc Ras Heia The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: used, axle configuration: > 3 axles, suspension: air, tire size: 385-65R22.5, Year of construction: 2015, Tandem tipper trailer, 3-way tipper, internal dimensions approx. 4,950 x 2,360 x 900 mm, steel side walls swinging and foldable with central locking, rear wall swinging with automatic opening. Tires 385-65R22.5 - 4x new, air suspension, ABS. 50 mm adjustable towing eye via screw plate, single-circuit hydraulics, dual-circuit air (Duomatic), 24 volts. Permissible total weight 18,000 kg, payload 13,400 kg. Body painted green, chassis gray. Next inspection valid until May 2026. = Additional Information = Tire size: 385-65R22.5 Suspension: Air suspension Iiodpfjwmlnyjx Aa Hja Unladen weight: 4,600 kg Payload: 13,400 kg Gross vehicle weight: 18,000 kg Please contact Jan-Marc Schwickert for further details.

Condition: new, machine/vehicle number: 06b624786df9f4b5c196a36b0, empty load weight: 3 kg, maximum load weight: 11 kg, overall weight: 14 kg, axle configuration: 2 axles, tire size: 285 / 70 r 19,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing 2-speed gearbox support foot at the front Folding rear support Wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 285 / 70 R 19,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Lights completely in LED version (note! with certain towing vehicles, misdiagnosis can occur, although the function is given) 1 x 15-pin plug at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic operation via truck power take-off Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside retraction springs (not possible with split side walls) Rear wall hinged and as 2-leaf door (cannot be folded down), with door holder and protective rubber on the side Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Country of registration / plates Country of registration: Germany Iiedpfx Asi Ri Ipoa Hja with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation15-year warranty against rusting through Dropside/bridge RAL 3002, carmine red Please note! Bridge only primed inside! Attention: Archive pictures!

Condition: new, machine/vehicle number: dd98a7658922be8f2e25bcadb, empty load weight: 2 kg, maximum load weight: 8 kg, overall weight: 10 kg, axle configuration: 2 axles, tire size: 235/75 r 17,5, Further information Chassis central axle trailer low bed Fine-grained steel welded construction Telescopic front support leg Telescopic rear support 2 wheel chocks with holder Mudguards made of sheet steel over both wheels Towing device central axle trailer Tow bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brake Iijdpfx Aaei Ri Ebo Hja Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, TTS bridge Low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor Bridge length 4500 mmTub at the front and sides with Load-Lock profile for attaching tensioning straps (8 straps at the front, 12 straps on each side) Note: Slight floor undulation possible due to welding distortion! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. 2 additional pairs of lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways with grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame RAL 3002 carmine red Hot-dip galvanized drive-on ramps Attention: Archive pictures!

Condition: new, machine/vehicle number: bdf30cb8a53c70e900bdb40a7, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: -, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gearbox support foot at the front 2 wheel chocks with holder Steel underride guard Rear splash guards across the entire width Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Tow bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoted with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Iedsi Riwiepfx Aa Hoia Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 3002 carmine red Rear support, access ramps, storage box are optionally available at extra cost Attention: Archive pictures

Condition: used, maximum load weight: 7,500 kg, overall weight: 10,700 kg, axle configuration: 2 axles, first registration: 08/2003, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, Equipment: ABS, id: 302473 TPS 100 For more information please call: , +????? ?? ????? ???? ????? ???: 420734511212 Iodpfx Asycazlea Hoia

Condition: new, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total width: 2,550 mm, Vehicle / Body: Tandem Low-Bed Trailer First Registration: New vehicle Gross Vehicle Weight: 10,500 kg Unladen Weight: 2,500 kg Payload: 8,000 kg Overall Length: 7,280 mm Loading Length: Platform length approx. 5,500 mm Width: Platform width 2,050 mm / 2,550 mm Loading Height: Platform height 630 mm Additional Information plus freight/preparation from stock location 26639 Wiesmoor €1,280.00 / net - Overall height approx.: 2,900 mm - Side wall height approx.: 400 mm - Frame RAL 5001 Blue Green Chassis: Central axle low-bed trailer Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support Wheel chocks with holder Steel fenders over both wheels Drawgear for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles at our discretion, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235/75 R 17.5" manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air brake system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connection lines to tractor unit, ABS and ALB, with ABS connector at the front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lamps, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe connectors at the front, with connecting cable, TTS Platform low-mounted steel trough, platform floor with steel/chequer plate covering, steel sides solidly welded to the floor Braking system 2-line compressed air brake system Spring-actuated parking brake 2 fail-safe coupling heads at the front, with connection lines to tractor unit, Ijdpfx Aaowwab Aj Hsia 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber LED lamps, side yellow LED lighting, license plate lighting in LED, (Note: with certain tractor units, incorrect diagnostics may occur even though the functions are in operation) 2 white position lights at the front in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin fail-safe connectors at the front, with connecting cable, park sockets for electrics / ABS / air connections on the drawbar TTS Platform low-mounted steel trough, platform floor with steel/chequer plate covering, steel sides solidly welded to the floor Platform length 5,500 mm Trough at front and sides with "Load-Lock Profile" for lashing straps (8 in front, 16 per side) Note: Minor unevenness in the floor due to welding distortion possible! 2 pairs of lashing eyes, 1 x in the front corners of the steel trough and 1 x in the floor rear, each 5t 3 pairs of additional lashing eyes in the floor, each 5t 4 pairs of lashing eyes bolted onto the side walls Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handgrip on the ramps Ramp surface with "Mega Grip" made of serrated grating (contact area with steel/chequer plate) with gas pressure springs for one-man operation

Condition: used, maximum load weight: 33,787 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2017, next inspection (TÜV): 01/2027, loading space length: 7,200 mm, loading space width: 2,350 mm, total width: 2,550 mm, Gross weight: 39,000 kg / 35,000 kg Tare weight: 5,213 kg Iodpeycbi Rjfx Aa Heia Payload: 33,787 kg / 29,787 kg Overall length: 8,200 mm Loading length: 7,200 mm Width: loading width 2,350 mm / total 2,550 mm Additional information - Internal bin height: 1,450 mm - Volume: 24.5 m³ - Fifth wheel height: 1,200 mm - Tarpaulin bar with bracket - BPW axles - Air suspension - Steel round-body in "tub shape" - Rear wall as pendulum tailgate - Work platform with access steps - One-sided roll tarp Vehicle may be wrapped or labeled with advertising.

Condition: new, machine/vehicle number: 074630ca1b8dc2d710f82c15a, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Without support leg Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Stone-repellent surface Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Polished aluminum rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Iedpfsi Ri H Sex Aa Hoia Floor 5 mm thick throughout, Brinell 110Note! Only for transporting sand, grit and rolled gravel with a maximum grain size of up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with step, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Revolution Link: Revolution Link experience report: Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Body R

Condition: new, machine/vehicle number: 357314e4e176f8758d11ba42b, empty load weight: 4,500 kg, maximum load weight: 30,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. 2 wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Iiedpfoi Ri R Iox Aa Hsa Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Automatic tilt lowering with shut-off valve Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear

Condition: new, empty load weight: 900 kg, overall weight: 2,400 kg, color: green, Year of construction: 2026, Buy online at trailer-shop.de Many models available online at ANHÄNGERWIRTZ Convenient online shopping 24/7 Pick up yourself or have it delivered. Iisdpfx Ajyx Sdrea Hea The online pickup market for your new trailer offers strong, brand-name manufacturers! Over 850 new trailers in stock Over 130 used trailers always available. Non-binding example: New price incl. VAT (VAT deductible) Champion Esprit C Hood green tack room kick protection 100 km/h 2400kg Horse trailer Champion Esprit C SK - 2 horses, 2400kg, BPW chassis lowered, 100 km/h-rated with shock absorbers, silver anodized aluminum walls / green polyester roof, lockable tack room, lifting tarpaulin, clear dividing wall without PVC upper section, bonded & sealed rubber floor, rubber on ramp, tread strips, side stops, 13-pin plug with reverse light, automatic jockey wheel, new 2025 model, black wheel trims … Telephone sales and order acceptance at the following times: MON - FRI 08:00 - 12:30 & 14:00 - 18:00 or 24/7 via our online shop at trailer-shop.de Copyright – Trademark protection 03/26 Manufacturer: Böckmann Fahrzeugwerke GmbH Article No.: 1172785GREEN+SET

Condition: used, maximum load weight: 1,979 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,530 mm, loading space height: 350 mm, total width: 1,660 mm, total height: 660 mm, A39 GW26GA00010, Iisdpeyn Ucuefx Aa Hea Rear tipper by STEMA, model ROCKO II SHRK .2, Gross weight: 2,700 kg, year of manufacture: 2022, overrun braked, high loader, rear tipper with aluminium side panels, hydraulically tiltable, with rear pendulum tailgate. Errors and prior sale excepted.

Condition: new, overall weight: 2,400 kg, Year of construction: 2026, Buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models are available online Shop conveniently 24/7 online Self pick-up or delivery available. The online pick-up marketplace for your new trailer offers leading brand models! Over 850 new trailers in stock Over 130 used trailers constantly on offer. Non-binding example: New price, VAT deductible 2026 Portax Esprit horse trailer silver black – 2 horses, 2400kg BPW chassis, lowered, high anodized aluminium walls / black poly roof and front, tarpaulin lift, clear divider wall without PVC top section, sealed and glued rubber floor, rubber on ramp (step strips), tack box, side kick protection, 13-pin plug with RFS... aluminium floor and walls, automatic jockey wheel.... Sales & telephone order acceptance during the following hours: MON. – FRI. 08:00–12:30 & 14:00–18:00 Or 24/7 via our online shop at trailer-shop.de Iijdoyif Ubjpfx Aa Hsa Copyright – Trademark Protection 02/26 1140194+BLACK+SET

Condition: new, empty load weight: 120 kg, maximum load weight: 630 kg, overall weight: 750 kg, loading space length: 4,300 mm, loading space width: 1,580 mm, color: other, working width: 1,580 mm, Equipment: cable winch, Manufacturer: Brenderup Type: Single Jetski Premium PWC10750UB RAX Maximum total weight: 750 kg Payload: 630 kg Empty weight: 120 kg For jet skis up to 3.8 m long/13 feet and 1.60 m wide Tires: 13 inches Including cable winch with winch stand and support wheel. Side with crankable long supports and 2 adjustable keel rollers. This allows for perfect support of the jet ski. - Easy operation of the light holder - Fender with non-slip surface and made of weatherproof plastic - Perfect driving characteristics - Winch position can be adjusted in several ways - Winch position with winch and belt strap - Adjustable and removable light console (extendable) - 13-pin plug Price includes COC papers (vehicle registration document, registration certificate part II) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Unsinn and Neptun We can provide you with a free transfer license plate on request. We repair trailers from all manufacturers. Additional accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints. Suspension axle, independent wheel suspension, cable winch, support wheel, hot-dip galvanized, unbraked, includes guarantee, Brenderup uses galvanized components which optimally protect the trailer against rust, robust and stable chassis construction, 13-pin. Plug with reversing light, protected rear lights, 13 inch tires, including 100 km/h certificate Iiedpfed T Sr Tox Aa Hsa

Condition: used, axle configuration: 3 axles, first registration: 05/2024, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,010 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2024, Equipment: ABS, = Further options and accessories = - EBS - Lifting roof = Remarks = Number of axles: 3, Unladen weight: 5,905 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2024, Lifting roof, Sliding roof, Axle type: SAF = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 12 mm; Tyre tread right: 11 mm Axle 2: Tyre tread left: 12 mm; Tyre tread right: 12 mm Axle 3: Tyre tread left: 12 mm; Tyre tread right: 11 mm Weights Kerb weight: 5,905 kg Payload: 33,095 kg Gross vehicle weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition General condition: Very poor Technical condition: Very poor Optical condition: Very poor Damages: None = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European makes, years, and price categories. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • Competitive prices • Reliable business practices • We speak many languages • We understand our customers Isdpfxsyupdyo Aa Hoia • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of ‘recognisable quality’ • And much more … Please visit our website for special offers and our complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiedpoy Di Ulefx Aa Hja

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiodpfey Di Tnex Aa Hja

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 10/2011, loading space length: 12,450 mm, loading space width: 2,470 mm, loading space height: 2,280 mm, total length: 12,550 mm, total width: 2,550 mm, suspension: air, wheelbase: 8,770 mm, color: red, Year of construction: 2011, Axle configuration Make axles: BPW Rear axle 1: Lift axle; Max. axle load: 10000 kg; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: air suspension Rear axle 2: Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 6.200 kg Carrying capacity: 28.800 kg GVW: 35.000 kg Functional Wall thickness: 7 mm Condition Technical condition: good Visual appearance: good Identification Iodpfxevpvygo Aa Hsia Registration number: OL-52-LX