Used Krone Refrigerated Swap Bodies / Swap Body Reefers for sale (1,348)

Condition: used, functionality: fully functional, Year of construction: 2015, color: blue, overall weight: 16,000 kg, loading space length: 7,820 mm, loading space height: 2,700 mm, reception height: 1,120 mm, We sell or rent out approximately 80 double-decker box bodies with roller shutter doors. Double-decker box body. Length: 7,820 mm. Internal height: 2,700 mm. Portal height inside: 2,525 mm. Total height: 2,925 mm. Corner height: 2,900 mm. Closed box body construction. 19 Euro pallet spaces. The box bodies are located in Southern Germany and in 49504 Lotte. Fsdpfx Aew Hxxreaxjpp

Condition: refurbished (used), functionality: fully functional, color: white, 7.82 m BDF Krone Smooth-Sided Swap Body, used (multiple units available) Color: White Drop-off height: 1120 mm The swap body is watertight and the roller shutter door operates smoothly. Approximate external dimensions (mm): Length 7820 x Width 2550 x Height 2925 Approximate internal dimensions (mm): Length 7700 x Width 2480 x Height 2700 Door opening (mm): Width 2370 x Height 2530 Lashing: Keyhole type Permissible total weight for approval/operation: 16,000 kg Intermodal ready, incl. rail coding to DIN EN 13044 Rail approval Code XL (for rail transport at speeds over 120 km/h) Floor frame: 195 mm high floor module incl. floor panel; rectangular tube longitudinal beams with cross members and outer frame as welded construction with underfloor guide tunnel 4 container corner castings on 20' basis, symmetrical overhangs, 4 grab bar profiles 7 pairs of lashing rings at the sides in the rubbing strip Floor: Type: BO WST 27 mm thick, waterproof bonded phenolic resin-coated plywood floor, strength as per DIN EN 283; suitable for forklift axle loads up to max. 5,460 kg 2 ventilation openings at the front in the floor (as per GGVS) Box body: Superstructure type: AB WST Fpsdpfx Aaevxbfmsxjp Internal height: 2700 mm Portal height (internal): 2525 mm Total height: 2925 mm Corner height: 2900 mm Closed superstructure Smooth side walls made of galvanized steel sheet panels Roof made of trapezoidal profiled steel sheets, panel height: 25 mm 2 ventilation grills per side wall Rubbing rail and side wall with recesses; internal forklift impact protection, 3-sided, approx. 300 mm high Front wall smooth, made of galvanized steel sheet panels Interior front wall with 21 mm phenolic resin-coated plywood, 750 mm high, above that continuous 12 mm plywood Exterior front wall upper section offset (optimized for cornering) Rear wall with roller shutter door (net width: 2370 mm), with DB Train Plus approval, replaceable rollers Flat steel impact protection for roller shutter guide rails Side walls internally fully covered with keyhole plates 13 steel guide rails recessed left and right for double-deck load bars 13 LM load beams for double-deck loading Horizontal steel impact protection on rear profile, left and right Note: Actual dimensions and other specific details may vary slightly from the above due to ongoing product improvements.

Condition: used, Year of construction: 2010, color: white, overall weight: 16,000 kg, empty load weight: 2,700 kg, loading space volume: 49.9 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,755 mm, Swap body, sliding curtain BDF system, 7,450 mm long, internal height: 2,930 mm. PAINT & CURTAINS NEW! Used and refurbished swap body with Edscha sliding roof and sliding curtains, BDF system, 7,450 mm length. Hek portal doors with internally mounted locking rods. Interior: Phenolic plywood floor and double-sided 25 mm pallet stop strip. Our services: * New paint finish in RAL 9010 white (other RAL colors available on request) * New side curtains in RAL 9010 white (other colors available on request) * Undercarriage treated with underbody protection * Brand new telescopic or newly painted support legs in RAL 9005 black * New galvanized pull-out ladder * UVV functional inspection certificate All stated values are approximate dimensions in mm and kg. Delivery date upon request. Delivery possible. Offer is non-binding, intermediate sale reserved. Prices are net ex works location D-59558 Lippstadt-Rixbeck. Find further items at pstä. . Fpodpfxexq E Rys Aaxjp

Condition: used, Year of construction: 2016, color: white, overall weight: 16,000 kg, maximum load weight: 12,680 kg, empty load weight: 3,320 kg, loading space volume: 49 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,720 mm, first registration: 06/2016, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40301 Krone Swap Body / Container * Year of manufacture: 2016 * 7.45 m length * Fixed roof * Load securing certificate DIN EN 12642 Code XL * Retractable lashing rings Fpodpfsxqlnrox Aaxjp * Roller shutter door * Textile version * Double-deck preparation * Telescopic support legs * Rail-loadable – craneable * Miscellaneous, Other * Gross vehicle weight: 16,000 kg * Unladen weight: 3,320 kg * Payload: 12,680 kg * Permissible gross weight: 16,000 kg * Internal dimensions: L=7,300 mm, W=2,480 mm, H=2,720 mm * Internal volume*: 49 cbm * Corner casting dimensions E=5,853 mm * Overhang dimensions: 799 mm * Parking height: 1,120 mm * Pallet spaces: 18 * Krone Swap Body 745 * KTL primed * Smooth front wall Disclaimer: Subject to change, prior sale, and errors excepted. You can find more images and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Procurement of all (export) documents * Ordering export plates / customs plates * Vehicle preparation: new tarpaulins, signage, paintwork, etc. * Professional loading / load securing * TüV approvals, registration service * Transport of commercial vehicles Please consult our trained specialist staff, we are happy to advise you.

Condition: used, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 02/1999, Equipment: ABS, Krone LAG 0-3-39L Container Chassis BDF Ref. No. for inquiries: 1025803 * Overall condition: very good * ABS * 3 axles, air-suspended * BPW axles * Drum brakes Tyres: * 1st axle: 385 / 55 R22.5 30% air suspension * 2nd axle: 385 / 55 R22.5 30% air suspension * 3rd axle: 385 / 55 R22.5 30% air suspension ----Price: €6,900 + 19% VAT. Fpedpfexplm Eox Aaxjp For further questions, you can reach us at the following numbers: We speak: German, English, Polish, French, and ???? Errors, mistakes, and prior sale excepted.

Condition: used, maximum load weight: 13,020 kg, overall weight: 16,000 kg, first registration: 01/2022, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2022, Vehicle No. G0121647_1 - Manufacturer: Krone. * Simple corner fittings * Side/rear contour markings * Load certificate Code-XL * Portal door with simple external locking bars * Internal keyhole system Fjdpfjxdg D Isx Aaxjpp * Forklift accessible * Telescopic support legs * Suitable for rail transport * Lashing points Smooth furniture floor. Delivery time: IMMEDIATE AVAILABILITY. Furniture equipment. Ø Signs of wear from short-term use - see photos. Technically operational condition with no further repairs required. Undercarriage shows signs of wear. UVV valid. LASI CODE XL!!!. As-new condition! Dimensions are approximate. Offer non-binding, subject to prior sale. Prices are net ex-location D-59302 Oelde. Further details on request by phone or email:

Condition: used, overall weight: 2,600 kg, first registration: 01/2014, loading space length: 7,300 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, loading space volume: 49 m³, Year of construction: 2014, * Krone WP 7.7 LS5-CS swap body Fjdpfsxnfzgsx Aaxepp * Permissible gross weight: 16,000 kg * Unladen weight: 2,600 kg * Edscha sliding roof * Sliding tarp * Portal doors * Cargo area: 7,300 x 2,500 x 2,700 mm * 4 container corner castings based on 20' standard * Parking height: 3,930 mm * Rear sliding step ladder * 27 mm thick, waterproof bonded plywood floor, floor load capacity up to 5,460 kg forklift axle load * Outer beam lower edge: 2,480 mm / Rear portal drive-through height: 2,555 mm * Lashing options inside left and right on the front wall * Folding roof traverse, can be moved with the roof * Multilock rail on the side rail on both sides As viewed or offered, without additional services/accessories. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we will be happy to provide an offer from our partner workshops! The vehicle may feature advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier declarations, etc.! The information provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment is to be verified separately if necessary. We expressly reserve the right to prior sale, as this item is also offered on other platforms. Accessories information is given without guarantee. Subject to changes, prior sale, or errors. We offer and strongly recommend an inspection and review to avoid any misunderstandings regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: used, overall weight: 16,000 kg, first registration: 06/2006, Year of construction: 2006, Serial number: 6W1281265 Year of manufacture: 09/2009 Unladen weight: 2,860 kg Internal dimensions: 7,300 x 2,480 x 2,720 mm Fpedpfx Asxpa Dxsaxsp Rear loading height: 2,460 mm (restricted due to roll-up door) Suitable for textile transport – perforated wall Parking heights: 1,120 – 1,320 mm Modifications, prior sale, and errors expressly reserved. The description serves solely for general vehicle identification and does not constitute a warranty within the meaning of commercial law. Only the description as per the purchase agreement is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops. The vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: new, Year of construction: 2025, color: white, overall weight: 2,710 kg, empty load weight: 16,000 kg, loading space volume: 45.6 m³, loading space width: 2,480 mm, loading space length: 7,280 mm, loading space height: 2,525 mm, Swap body, insulated, BDF system, 7,450 mm, CATERING EQUIPMENT, FACTORY NEW Factory-new insulated swap body, BDF system, 7,450 mm long, high portal doors with double internal rotary bar locks at the rear. CATERING EQUIPMENT: Dimensions and features can be individually configured for a customized price! Specification shown in the photo: - 2 sales openings with electric shutters on the left side (each W: 2.5 m x H: 1.3 m) - 1 single-leaf entrance door on the right side (W: 1.2 m x H: 2.0 m) - Insulated double floor Body painted in RAL 9010 pure white. Telescopic support legs in RAL 9005 black, suitable for parking heights from 920 to 1,320 mm. Side walls, front wall, and roof in sandwich construction with steel top layer, painted outside, PVC-coated inside, panel thickness front wall: 50 mm / roof: 30 mm / side walls: 30 mm - Internal forklift impact protection on 3 sides, approx. 300 mm high. Including load securing certificate according to EN 12642 Code XL Delivery date on request. Delivery possible. Leasing option available. All stated values are approximate measurements in mm and kg. Offer is non-binding, subject to prior sale. Fpsdpfexp Rxtsx Aaxep Prices net ex location D-59558 Lippstadt-Rixbeck. You can find more items at . .

Condition: used, maximum load weight: 34,550 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 06/2011, Equipment: ABS, KRONE SD ----VEHICLE HISTORY * GERMAN VEHICLE * TÜV APPROVED * FROM 1ST OWNER * VIDEO AVAILABLE ON REQUEST VEHICLE EQUIPMENT * MULTI-CHASSIS * 2X20-1X30-1X.40-1X45 (CONTAINER POSITIONS) * FRONT TUNNEL SYSTEM EXTENDABLE * 3 AXLES * BPW ECO PLUS AXLES * DISC BRAKES * AIR SUSPENSION * TIRE SIZE: 385/55 R 22.5 * GROSS VEHICLE WEIGHT: 40,000 KG * PAYLOAD: 34,550 KG * IMMEDIATELY READY FOR OPERATION ----* EXPORT SALE ONLY WITH DEPOSIT (MIN. €500 - €2,000) * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT CUSTOMS CLEARANCE EXW WITHIN 10 MIN (APPROVED EXPORTER); 5 DAY, 30 DAY PLATES AND 17 - 21 DAY AUSTRIAN PLATES EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit of at least €500.00 / €1,000.00 will be required. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied) Subject to changes, errors, and prior sale! You can find more vehicles on our homepage: Fpjdpfsxngxyex Aaxsp Sales are conducted exclusively according to our terms and conditions—see homepage for details. Important notice: Despite careful verification of all details in our offer, errors may occur. In some cases, these are caused by transmission errors in the systems of various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal note: This sales advertisement does not constitute an offer in the sense of §145 BGB. Rather, it is information intended to facilitate contract negotiations. All information provided is without guarantee and does not represent assured characteristics.

Condition: used, maximum load weight: 37,570 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 07/2026, total width: 2,420 mm, Year of construction: 2019, Equipment: ABS, You can find our complete vehicle inventory, including all vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis: * Double-T longitudinal beams welded with cross members, front frame height approx. 147 mm (including kingpin plate) * 'Compact-Rear' chassis design * Exchangeable 2-inch kingpin, 1 position, front overhang approx. 570 mm * Container rails in rectangular tube, approx. 200 x 120 x 8 mm wall thickness, reinforcements at impact edge * Fixed steel rear underrun protection * Rear underrun protection according to EC directive * Side impact protection according to EC directive * Side protection approx. 460 mm high * Quick-Lock full specification – locks at every possible position – locks are theft-protected * Container locks suitable for accommodating the following container: 1 x 20' container flush with the rear * Length from kingpin to rear edge of vehicle: approx. 6,620 mm Landing Gear: * Two mechanical landing legs, 2 x 12 t, semi-round with base plate, single-sided operation on front right (FR) Axles/Aggregate: * Axles with 9,000 kg load capacity each * Wheelbase: approx. 1,410 / 1,310 mm with center alignment * KRONE axles with air suspension and disc brakes, ET 120 * Axle group spacing = approx. 4,625 mm * Brake discs approx. 430 mm diameter * Extended warranty for KRONE axle: 6 years with unlimited mileage for on-road use within the EU * All wear-related components have a 3-year construction and manufacturing warranty, with natural wear excluded. Applies to EU 2014, Norway, Switzerland, Turkey * Fully automatic load-dependent electronic lift axle control for 1st axle * Manual control function via control panel for forced lifting (starting aid per Directive 97/27/EC) and forced lowering via rotary switch * Preparation of lift/trailing axle(s) for operation from the truck (without truck-side installation), according to selected light/signal connector(s) – to be activated through contact 6 of 7-pin auxiliary socket (ISO 3731) and/or contact 12 of the 15-pin socket (ISO 12098) and/or contact 8A of the VBG socket * With lift and lowering device, including automatic ride height reset Tires (Rims): * 6 units, 385/65 R 22.5 * Without spare wheel * Tread: M+S (mud and snow) * Wheel nuts with protective caps * No spare wheel holder Mudguards: * Plastic wheel arch covers * Splash guard according to EC directive Brake System: Fpsdpfxjxmpwpe Aaxop * Brake system according to ECE Regulation 13 (including vehicle stability function) * Spring-loaded parking brake * Diagnostics via ISO7638 socket (EBS supply cable) * Brake line connectors below upper frame edge * 4 wheel chocks with bracket * Wheel chock(s) secured with chain * Standard air connections ISO 1728 (palm coupling) * Brake system manufacturer: Wabco * Note: The trailer may only be towed by vehicles that ensure proper ABS operation! * Audible reversing alarm (activated via reversing light) * EBS system, 2S/2M, 2 sensors on one axle Lighting: * Lighting and signaling equipment per UN ECE Regulation No. 482 * Outline marker lights with rubber arm, LED design * Electrical connections below upper frame edge * LED side marker lights * 24 volt front connection with 15-pin socket per DIN ISO 12098 * Additionally, two 7-pin sockets at the front per DIN ISO 1185 and 3731 * Connector contacts (2x7-pin and/or 15-pin) as per ISO11

Condition: used, maximum load weight: 12,700 kg, overall weight: 16,000 kg, first registration: 01/2004, loading space length: 7,670 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2004, Wagon No. G0105913_1 – Manufacturer: Krone. Fpodpfx Aoxdg D Ujaxep * Double-deck equipment * Standard corner castings * Side/rear contour markings * Load certificate Code-XL * Portal doors with standard external locking bars * Keyhole system inside * Forklift accessible * Fixed support legs * Lashing pockets * Lashing points Double-deck equipment without double-deck load bars (available at extra charge!). Delivery time: AVAILABLE IMMEDIATELY. Technically operational condition with no further repairs required. Undercarriage shows signs of use, some areas with surface rust. Occasional paint peeling on components of the swap body. Isolated rust spots on components of the swap body. Container with markings/decals (see photos). LASI CODE XL!!! Dimensions are approximate. Offer is subject to prior sale; prices are net ex location D-59302 Oelde. For further details, please contact us by phone or email.

Condition: refurbished (used), functionality: fully functional, 7.82 BDF Krone smooth wall swap body, used (several available) The swap body including the roof is painted on the outside in the customer's color. Common RAL color The substructure and parts of the support feet are not painted, this is not visible after setting it down on the ground. Fpjdpfx Aajvv R Ifoxop Parking height 1120 mm The swap body is waterproof and the roller door is standard. External dimensions in mm approx: Length 7820 Width 2550 Height 2925 Inner dimensions in mm approx: Length 7700 Width 2480 Height 2700 Door openings in mm: Width 2370 Height 2600 Lashing: keyhole For registration/operation maximum permissible. Total weight: 16,000 kg KLV-capable, including rail coding according to DIN EN 13044 Rail approval Code XL (for rail transport over 120 km/h) Floor frame 195 mm high floor assembly including floor; rectangular tube longitudinal beams with cross beams and outer frame as a welded construction with guide tunnel underneath 4 container corner fittings on a 20' base, symmetrical overhangs 4 gripper bars 7 pairs of lashing rings on the side in the rub rail Floor Type: BO WST 27 mm thick, waterproof glued screen-printed panel floor, strength according to DIN EN 283; for floor loads up to max. 5,460 kg forklift axle load 2 ventilation openings at the front in the floor (according to GGVS) Case housing Structure TYPE AB WST Inner height: 2700 mm Portal height i. L. 2525 mm Total height: 2,925 mm Corner height: 2,900 mm Closed structure Smooth side walls made of galvanized sheet steel cassettes Roof made of trapezoidal profiled sheet steel, construction height: 25 mm 2 ventilation gills per side wall # Rubbing strip and side wall with recesses Forklift collision protection inside, 3-sided, approx. 300 mm high Smooth front wall made of galvanized sheet steel cassettes Inside front wall with 21 mm screen-printed panel, 750 mm high, above it a continuous 12 mm screen-printed panel Outside front wall at the top with offset (optimized for cornering) Rear wall as roller door (width in length 2370 mm), with DB approval Train Plus, rollers can be replaced Flat steel collision protection for roller door guide rail Inside side walls completely covered with keyhole plates 13 steel guide rails each set into the left and right to accommodate double-decker loading beams 13 LM loading beams for double-decker loading Steel impact protection horizontally on the rear profile, left and right Please note: Actual dimensions and other specific details may differ slightly from the above information due to continual product improvement.

Condition: used, maximum load weight: 35,050 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 02/2014, Equipment: ABS, Vehicle Identification No.: WKESD00000604647 SLIDER CHASSIS - MULTI Telescopic front + rear 2 x 20", 1 x 30", 1 x 40", 1 x 45", 1 x 45" long tunnel German vehicle inspection due Own weight: 5,950 kg VALX axles with disc brakes LIFT AXLE Tires: 385/55 R 22.5 Changes, prior sale, and errors are expressly reserved. The description serves as a general identification of the vehicle and does not constitute a warranty under the sales law. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. Fjdpfx Asxpa A Ueaxopp

Condition: used, Year of construction: 2011, color: white, overall weight: 18,000 kg, empty load weight: 3,020 kg, loading space volume: 45.9 m³, loading space width: 2,470 mm, loading space length: 7,300 mm, loading space height: 2,545 mm, Swap body, corrugated steel, BDF system, 7,450 mm long, NEW PAINT!! Used, fully refurbished corrugated steel swap body. BDF system, 7,450 mm long Fpodpfxoxmkuve Aaxop * Superstructure completely blasted, primed, and NEWLY PAINTED in RAL 9010 white. * Substructure blasted, primed, and treated with underbody protection. * Installation of factory-new aluminum double-wing doors with galvanized rod locks and new rubber seals. * Factory-new telescopic support legs in black * Forklift pockets, corner locks in the roof – stackable * Interior with keyhole plates in the corrugations * Wooden floor * Access ladder at the rear * New UVV (accident prevention regulation) Delivery possible. All stated values are approximate measurements in mm and kg. This offer is subject to change and prior sale. Prices are net ex location D-59558 Lippstadt-Rixbeck. You will find more items at . .

Condition: used, mileage: 1 km, first registration: 06/2007, overall weight: 16,000 kg, color: white, loading space volume: 47 m³, loading space width: 2,460 mm, loading space length: 7,300 mm, loading space height: 2,600 mm, Swap body with rear rolling door, keyhole side walls, anti-slip plywood flooring. Vehicle may be stickered and/or lettered with advertising. Multiple units in stock! Fpodpexbvv Ijfx Aaxep Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops! The vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: used, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 01/1991, GERMAN Visit our website, where you will find our complete vehicle stock with many more photos and information in several languages. SEL X005 Krone SDC 24 German registration First registration: 24.01.1991 Gross weight (kg): 35,500 Authorized gross weight (kg): 35,500 Empty weight (kg): 5,760 VIN: MW1030785 TIRES AND AXLES: Tires: Fpodpfxswmiwlj Aaxop Axle configuration: 3 axles BPW Drum brakes VEHICLE DOCUMENTS: Registration certificate Title In total, we have 5 semi-trailers for container transport for sale. Krone SDC 24 / 21-11-1992 / NW1049223 Renders N2SG31L / 26 WRA3SCO392CML0787 Renders N2SG31L / 26 WRA3SCO392CML0790 Renders N2SG31L / 26 WRA3SCO392CML0786 M. BUFANO m. (Italiano, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC d. (German, Bosnian) L. OBODYNSKA Ukrainian, Russian) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH Although every effort has been made to ensure the accuracy of the information, we cannot guarantee errors or omissions. We ask our customers to consult the available photos. The specified measurements are approximate values. Our vehicles are sold in the AS-IS condition in which they are found. We invite customers to visit our company to personally check the condition of the vehicle. Furthermore, we offer the possibility of a test drive. It is important to note that the batteries supplied with the vehicle are those currently installed. If the customer wishes for new batteries, we are available for price information.

Condition: used, maximum load weight: 12,980 kg, overall weight: 16,000 kg, first registration: 01/2022, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2022, Wagon No. G0121646_1 - Manufacturer: Krone. * Simple corner fittings * Side/rear contour markings * Load certificate Code-XL * Portal doors with simple external locking bars * Internal keyhole system * Forklift accessible * Telescopic support legs * Rail loading equipment * Lashing options Smooth furniture floor. Delivery: AVAILABLE IMMEDIATELY. Furniture equipment. Average signs of use from short-term service - see pictures. Technically ready for operation without further repairs. Undercarriage with signs of wear. UVV (accident prevention regulations) valid. LASI CODE XL!!! As-new condition! Fjdpfx Aaexdg Dzsxopp Dimensions are approximate. Offer subject to prior sale, prices quoted are net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, functionality: fully functional, color: other, maximum load weight: 16,000 kg, empty load weight: 3,200 kg, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,520 mm, 7.45 BDF Smooth wall swap body Parking height Standard parking height The swap body is rainproof and the roller shutter is standard. External dimensions in mm approx: Length 7450 Width 2550 Height 2750 Interior dimensions in mm approx: Length 7300 Width 2480 Height 2520 Door openings in mm: Width 2370 Height 2370 Lashing: Keyhole Weight: Tare 3200 kg Max payload: 12800 kg Max Gross: 16000 kg Capacity: 45,0 m Pallet capacity (in mm) Euro 800x1200 18 Fpedpfxotui Ave Aaxep Metric 1000x1200 14 Mesh box 835x1240 16 "Aussie" 1170x1170 12

Condition: used, maximum load weight: 35,050 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 02/2014, Equipment: ABS, Vehicle identification number: WKESD00000604646 SLIDER CHASSI - MULTI telescopic at the front + rear 2 x 20", 1 x 30", 1 x 40", 1 x 45", 1 x 45" long tunnel DE HU due Own weight: 5,950 kg VALX axles with disc brakes Fsdpfsxn Edbex Aaxopp LIFT AXLE Tires: 385/55 R 22.5 Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.

Condition: used, Year of construction: 2016, color: white, overall weight: 16,000 kg, empty load weight: 3,320 kg, loading space volume: 49.2 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,720 mm, Swap body, smooth steel, BDF system, 7,450 mm, rear aluminum roller shutter. Used steel swap body, BDF system, 7,450 mm long. Smooth side walls, aluminum roll-up door at the rear. Semi-jumbo, parking height: 1,120 mm With repaired lock panel - different from photo Interior equipped with full-surface keyhole system + double-deck loading with 12 steel guide rails mounted both left and right. 7 pairs of locking bars fitted laterally in the rubbing rail. All stated values are approximate dimensions in mm and kg. Delivery available. This offer is subject to change without notice and prior sale. Fsdpfx Aotyph Aeaxspp Prices quoted are net ex-location D-59558 Lippstadt-Rixbeck. More items available at ...

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,300 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 2,500 mm, Year of construction: 2013, Wagon No. G0113716_1 – Manufacturer: Krone. * Simple corner fittings Fodpfx Asxb Iw Rjaxspp * Suitable for forklift access * Fixed support legs * Equipment for rail transport * Lashing pockets * Lashing options Financing on request. Financing available. NEW paintwork: RAL color of your choice possible when ordering! Delivery time upon consultation! Newly painted. Technically ready for operation, superstructure and support legs newly painted. Chassis (KTL) cleaned and treated with underbody protection. UVV valid. UVV documentation available. NEW PAINT!!! Dimensions are approximate. Offer subject to prior sale, prices are net ex location D-59302 Oelde. More details upon consultation via phone or email:

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2023, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,760 mm, Year of construction: 2023, Wagon No. G0115525_1 - Manufacturer: Krone. * Simple corner fittings * Contour markings side/rear * Code XL cargo certificate * Aluminum roller shutter door * Forklift accessible * Fixed support legs * Rail loading facility Fpsdpfx Aajxbw R Hexep * Lashing options LASI CODE XL !!!. Multiple units available!. Like-new condition!. Delivery time: IMMEDIATELY. UVV (German accident prevention regulations) valid. Dimensions are approximate. Offer subject to change without notice. Prices are net ex works, D-59302 Oelde. Further details are available by phone or email:

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2010, loading space length: 7,280 mm, loading space width: 2,470 mm, loading space height: 2,500 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,735 mm, Year of construction: 2010, Trolley no. G0115598_2- Manufacturer: Krone. * Simple corner fittings * Contour marking side/rear * Load certificate Code-XL * Roll-up door (aluminum) * Forklift accessible * Fixed support legs * Device for rail loading 2 rows of lashing rails. Financing on request. Financing possible. Delivery time: IMMEDIATELY. Newly painted. Technically ready for use, body and support legs newly painted. Underbody (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. Swap body has been repainted in pure white (RAL 9010). NEW PAINT !!!. LASI CODE XL !!!. Multiple available! Fpodpfx Aoxbw S Dsaxep Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. For further details please contact us by phone or mail:

Condition: used, maximum load weight: 13,020 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Wagon No. G0117970_1 – Manufacturer: Krone. * Simple corner fittings * Side/rear contour markings Fedpfxexbw Tuj Aaxepp * Portal door with simple external locking rods * Internal keyhole system * Forklift accessible * Telescopic landing legs * Rail loading device * Lashing/tie-down points Delivery time: AVAILABLE IMMEDIATELY. Technically ready for use without further repairs. Subframe shows signs of use. UVV inspection valid. Deformations/impacts on components – see photos. Dimensions are approximate. Offer is non-binding, subject to prior sale. Prices are net ex location D-59302 Oelde. Further details upon request by phone or email: