Used Other Construction Machines for sale (16,988)

Condition: good (used), power: 86 kW (116.93 HP), fuel type: diesel, Year of construction: 2009, operating hours: 594 h, Cifa PC 607/411 D7 trailer pump serial number 13357 Auxiliary engine Deutz 6 cyl. Aspirated kw 86.5 rpm 2300 PC 607 pumping unit max. flow rate 65 mc/h Max. concrete pressure 112 bar Max. oil pressure 350 bar Rigid single-axle trailer, towing drawbar 4 manual stabilizers Hydraulic water pump Bodpjvz T Hhsfx Agbjww Automatic greasing pump Pumping hours 594 Year of construction 2009

Condition: used, Year of construction: 2003, Rebuild boom cylinder for Liebherr LTM 1100. Bwjdjxup R Ejpfx Agbow = Further information = CE marking: yes Serial number: obl

Condition: used, Year of construction: 2015, operating hours: 8,500 h, Please provide reference number upon request: 21694 Bwodpfx Agext Dhcobsw Specifications: 2015 model Certified until 09/2026 Hours: approx. 8500 (may increase) Weight: 22,400 kg 112 kW Undercarriage (see photos) Track width: 60 cm Total width: 299 cm S70 quick coupler Central lubrication Hammer hydraulics Oilquick Rototilt Digging bucket Grading bucket DiGPilot GPS Rear-view camera Rotating beacon Radio/CD Climate control / AC Services done by owner Video Ready for delivery Description:CAT 320EL tracked excavator from 2015.The machine has approx. 8500 hours.Sold with GPS, Rototilt, Oilquick, and 2 buckets.Ready for delivery. Hours: 8500 Own weight: 22400 Year controlled: Yes Year controlled until: 09.26 Width: 299 Kw: 112 Model: 320EL = More information = Serial number: CAT0320EVNAZ0xxxx Please contact ATS Norway for more information

Condition: used, Nordberg-Symons 51" Shorthead Cone Crusher, including infeed chute & lube pump/tank. Unit can be installed as a stationary unit or mounted on a mobile chassis at extra cost. Crusher comes straight out of work. Inspections are welcome. Bwjdpfx Ajxupchogbsw = More information = Empty weight: 22.000 kg

Condition: new, New and unused CAT bucket 320 B LINKAGE GD-CW40 CAT (R) ADVANSYS(TM) 80 Weight: 824 kg / 1,817 lb Bwsdpfx Ajw Dm Sbjgbow 1.19 m³ / 1.56 yd³ 1,200 mm / 48 in = More information = Empty weight: 824 kg CE marking: yes Serial number: MCN32720

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Please provide reference number upon request: 20243 Specifications: - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm - Track controls - Rear hatch does not lock - Chassis should be replaced - Loose track plates - Gps Bwjdpsxdux Hefx Agbow - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9 m/ Graveskuffe og gps = More information = Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2015, operating hours: 10,484 h, Caterpillar 320ELRR Excavator, Made in Japan, 4.128 Engine idle hours, 6.356 Actual working hours, E-rops cab with air conditioning, 6 cylinder turbocharged Caterpillar C6.6 ACERT Technology engine with 163HP (122kW), mono boom, Heavy Lift, check valves, stick length 2.90 Mtr, New Original Cat GP bucket with teeth and cutting edge, bucket width 1.00 Mtr, hammer lines, exta auxiliary hydr. function, undercarriage on average 80% remaining, 700mm triple grouser track shoes, 24,600 Kg operating weight, rear view camera, work lights, beacon, CE marked. Machine comes straight out of work and is in clean condition. Inspections are welcome. Bsdpfx Agexupcbeboww = More information = Empty weight: 24.600 kg Dimensions (LxBxH): 895 x 308 x 315 cm Serial number: 469 Condition undercarriage: 80%

Condition: used, CE marking: yes Bjdpfsxdlrkox Agboww Serial number: TBA

Condition: used, Year of construction: 2020, operating hours: 9,262 h, Please provide reference number upon request: 20531 Specifications: - 2020 model - 10262 hours - Certified to: 09/25 - 284 kW - 53050 kg - Track width: 60 cm - Machine width: 349 cm - 2 cam track shoes - Full track guides - Hammerglass - Serviced by owner - Undercarriage - Cleaning bucket - ​​S90 attachment - Extra hydraulics - Central lubrication - Lights - Air conditioning/ac Bwjdpfx Aswl Ua Nogbjw - Lights - Ready for delivery Description: We have a 2020Volvo EC480 E excavator w/ cleaning bucket for sale. The machine is in weekly operation so the number of hours may increase. It is also certified. The owner has serviced it continuously and the machine is working as it should according to the owner. Ready for delivery Hours: 9262 Own weight: 53050 Total Weight: 53050 Year controlled: Yes Year controlled until: 09/25 Width: 349 Kw: 284 CE: Yes Model: EC480E = More information = CE mark: yes Serial number: 31xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2008, operating hours: 132 h, Caterpillar D7G Ex-Army Dozer, Only 132 Hours on meter! E-rops cab, 6 cylinder turbocharged Caterpillar 3306DI engine with 200HP (149kW), 3 speed powershift transmission, straight blade with tilt, MS rear ripper with full set of teeth, undercarriage on average 90% remaining, 610mm track shoes, full set track guards, 22,000 Kg operating weight, front and rear work lights. Machine has exceptionally low hours and is in very clean condition. Inspections are welcome. Machine can be repainted in Cat yellow at extra costs. Multiple units available from stock! = More information = Empty weight: 22.000 kg Dimensions (LxBxH): 657 x 362 x 332 cm Serial number: 060 Bedpfx Agsxun Szebsww Condition undercarriage: 90%

Year of construction: 2025, condition: used, New: Yes CE marking: yes Bsdsw U T Rqopfx Agbjww Serial number: 1/4

Condition: used, Year of construction: 2016, operating hours: 11,000 h, Please provide reference number upon request: 19936 Specifications: Certified until: October 2025 Model year: 2016 Operating hours: Approximately 12,100 hours Power: 197 kW Weight: 31,600 kg Chassis: See pictures New chains Leica GPS Engcon Tiltrotator S70 quick release Sanding bucket Excavator bucket Webasto Central lubrication Additional work light Rotor beam LED bar Rear camera Radio/CD Air conditioning/AC Description: Bodov Ngc Ejpfx Agbsww Hitachi ZX300 crawler excavator from 2016. This excavator is equipped with Leica GPS, two buckets, and Engcon tilt, as well as new chains. It is certified and ready for immediate operation. The machine can be delivered at short notice. Hours: 11000 Own weight: 31600 Total Weight: 31600 Kw: 197 Model: ZX300LC-6 Beltegraver m/ 2 skuffer, tilt og GPS = More information = Serial number: HCMDDN50J0006xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2021, operating hours: 4,908 h, Hitachi ZX210LC-6 Excavator, 1.985 idle hours, 2.923 actual working hours, E-rops cab with air conditioning, 4 cylinder turbocharged Isuzu 4HK1 engine with 172HP (128,4kW), EPA Compliant, EU Stage IV/Tier 4 Final emission, mono boom, stick length 2.90 Mtr, hammer lines, check valves, hydr. quick coupler, New GP bucket with teeth, bucket capacity 1.40 M3, Trimble Earthworks Ready, undercarriage on average 80% remaining, 700mm triple grouser track shoes, rear and side view cameras, work lights, beacon, refuelling pump, 23,100 Kg operating weight, CE marked. Machine has low hours and comes straight out of work. Inspections are welcome. Bwsdpfjxun Susx Agbsw = More information = Empty weight: 23.100 kg Dimensions (LxBxH): 959 x 309 x 307 cm Serial number: 408 Condition undercarriage: 80%

Condition: used, power: 55 kW (74.78 HP), tire condition: 80 %, axle configuration: 4x4, Year of construction: 2022, operating hours: 1,124 h, Equipment: all wheel drive, = Additional Options and Accessories = - Rear view camera - Quick-attach coupler = Remarks = Caterpillar 908M CE certified. Bwodow Smi Uspfx Agbow Comes with forks and bucket EPA Tier 4 Immediately available. = Further Information = Tire tread: 80% Unladen weight: 6,460 kg CE marking: yes

Condition: used, Year of construction: 2013, operating hours: 6,650 h, Please provide reference number upon request: 21354 Specifications: 2013 model Hours: 6650 (may increase) 270 kW 6-wheel drive Decent tires Passenger seat Repainted Service and maintenance done in-house Rear-view camera Video included Ready for delivery Description:Doosan DA30 with only 6650 hours.The machine has two error codes: hydraulic tank temperature and AdBlue tank sensor.Service and maintenance have been carried out by the owner. Hours: 6650 Own weight: CE: Yes Model: DA30 = More information = CE mark: yes Bodpfxjxdrw Ho Agbjww Serial number: DINDDA30T3074xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2014, operating hours: 5,905 h, Caterpillar 938K, Made in USA, Delivered new in 2014, E-rops cab with air conditioning, 6 cylinder turbocharged Caterpillar C6.6 ACERT Technology engine with 175HP (129kW), hydrostatic transmission, full steer, dual axis joystick, Ride Control, hydraulic quick coupler, bucket with cutting edge, 650/65R25 Michelin XLD tyres, 15,800 Kg operating weight, rear view camera, front and rear work lights, CE marked. Machine has low hours, comes straight out of work and is in clean condition. Inspections are welcome. = More information = Bwsdpfxoxun Sne Agbew Empty weight: 15.800 kg Dimensions (LxBxH): 768 x 297 x 334 cm Serial number: 160 Condition undercarriage: 45%

Condition: used, Year of construction: 2017, operating hours: 6,925 h, Please provide reference number upon request: 19775 Specifications: - 2017 model - ca 7300 Hours - Certified to: 10/25 - Machine width: 232 cm - 8300 kg - 53.7 kW - Quick release - Central grease - Extra hydraulics - Cutter - Replaced control arms - Rubber belts - Rototilt - Sanding bucket - Climate - Light - Radio - Ready for delivery Description: Eurocomach ES85 SB4 Excavator with rototilt and sanding bucket for sale. The machine functions as it should according to the owner. The control arms and cylinder have just been replaced on it. New, used belts are also installed on the machine. Some looseness in the boom attachment, otherwise in good condition. Ready for delivery. Hours: 6925 Total Weight: 8300 Year controlled: Yes Year controlled until: 10.25 Width: 232 Kw: 53.7 = More information = Serial number: DM0xxxx Bwjdsxc Drgspfx Agbjw Please contact ATS Norway for more information

Condition: used, Year of construction: 2019, operating hours: 2,950 h, Please provide reference number upon request: 21692 Specifications: 2019 model Hours: approximately 2,950 Certified until 03/26 86 kW Weight: 9,500 kg Central lubrication 2013 Multiskopan folding wing drawer Tokvam snow mill Planning bucket Tires (see pictures) Webasto Good with light Rear view camera AC/climate Radio/DAB Bwedpfx Asxt Dh Asgbew Ready for delivery   Description: 2019 CAT 918M wheel loader w/ grading bucket, flap wing bucket and snow blower. The machine is certified until March next year. Is there a video? Ready for delivery. Hours: 2950 Own weight: 9500 Year controlled: Yes Year controlled until: 03/26 Kw: 86 Model: 918M hjullaster m/ planering skuffe, klappvinge skuffe og snøfres. SE VIDEO = More information = Serial number: CAT0918MHH260xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2015, Please provide reference number upon request: 21323 Specifications : - 2015 model - 10,000 hours approx. - Weight: 23,000 kg - 116 kW. - Sanding bucket - Engcon tiltrotator - S70 Quick Release - Chassis (see pictures) - Radio - Rear view camera - Leadable - Ready for delivery Description : 2015 model Komatsu pc228 uslc-10 with rotary tilt and sanding bucket for sale. The excavator has run for approximately 10,000 hours. This is ready for delivery.   Hours: 10.000 Own weight: 23000 Total Weight: 23000 CE: Yes Engine hours: 10000 Model: PC228 USLC-10 m/ pusseskuffe og rotortilt! = More information = CE mark: yes Bwedpfsxctihsx Agbsw Serial number: Serie nr: M6xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 1985, machine/vehicle number: L12xxxx, Please provide reference number upon request: 21706 Specifications: 1985 model About 106 hours 6 cylinder 230v 150 kVA Generator Ready for delivery Description: Bedpfsxt Dhpox Agbsww We have a 1985 Man-Stamford diesel generator with low hours for sale. 6 cylinder diesel generator with stamford sc4340 generator This one has barely four hours in relation to its age. It has been used as an emergency power unit. Mudguards and various exhaust parts included. Ready for delivery Own weight: 1 Engine hours: 106 Model: dieselaggregat m/ lite timer = More information = Field of application: Construction Please contact ATS Norway for more information

Condition: used, Year of construction: 2017, Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Bedpfx Agoxr Tx Ijboww   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps = More information = Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2017, Please provide reference number upon request: 21690 Specifications: 2017 model 9836 engine hours 3126 stroke hours 168kW 17200kg Leica GPS 2560 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Bsdsxr Txuepfx Agbsww     Description: We have a 2017 Atlas copco smartroc T40-11 Drilling rig w/ 2560 hammer, CME grinder and Leica gps for sale. Everything works as it should according to the owner. Services and maintenance have been taken continuously. The model is known for its versatility, precision and ability to operate effectively under tough conditions. Ready for delivery. Own weight: 17200 Engine hours: 9836 Model: smartroc T40-11 Borerigg m/ 2560 hammer, CME sliper og Leica gps = More information = Serial number: tmg17sed0500/8992 xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2012, Please provide reference number upon request: 21691 Specifications: 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Bwodpfx Asxr Txhegbjw Description: We have a 2012 Atlas Copco Flexiroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Own weight: 16600 Engine hours: 13265 Model: Flexiroc T40-11 borerigg m/2540 hammer,CME sliper og gps = More information = Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2014, operating hours: 1,920 h, Please provide reference number upon request: 21682 Specifications: 2014 model Hours: Approx. 1920 Weight: 5600 kg 33.8 kW Undercarriage (see photos) 1 new rubber track Track width: 40 cm Blade Total width: 200 cm S40 quick coupler Indexator RT20 Rototilt Digging bucket SMP grading bucket Hammer hydraulics Radio/CD Climate control/AC Service and maintenance done by owner Video attached Ready for delivery Notes: Engine was replaced at 100 hours, done by the dealer. Description:Eurocomach ES57 from 2014.The machine has only 1920 total hours; the engine was replaced by the dealer at 100 hours.Sold with rototilt and 2 buckets.Ready for delivery. Hours: 1920 Own weight: 5600 Width: 200 Kw: 33,8 Model: Eurocomach ES57 Beltegraver m/ Rototilt og 2 skuffer. 1920 timer. = More information = Bwjdpfx Ajxr Tw Rsgbow Serial number: DE0xxxx Please contact ATS Norway for more information

Condition: used, Please provide reference number upon request: 21681 Specifications: Size: 17.5 R25 2 Hilo tires 1 Bridgestone tire 1 rim Previously mounted on Volvo L60E Ready for delivery Bodpfx Ajxq U T Rogbjww Description:2 Hilo tires, 1 Bridgestone tire, and 1 rim for wheel loader. The tires were previously mounted on a Volvo L60E. Ready for delivery. Own weight: 111 Model: Dekkene har stått på en Volvo L60E = More information = New: No Field of application: Construction Please contact ATS Norway for more information