Used Grimme Precision Planters / Seed Drills for sale (74)

Condition: new, MATRIX 1200 GEN II Grimme Beet Drill Standard equipment scope, additionally equipped with: Foldable row marker, notched disc Row loosener: tine harrow Coupling: Cat. 3 lower link shaft Row spacing: 45 cm Mulch seeding unit Finger press wheel Disc covering device Mechanical pressure support, 4-way adjustable up to 90 kg Additional pressure adjustment for tractor track up to 120 kg Spring-loaded pressure support for press wheel, 3-way adjustable Beet kit – cell wheel, covering ring, ejection pin Seeder coulter with Hardox steel side walls and wear-resistant carbide plates on the underside Lighting and warning plates Operating manual as defined by country of operation Without operator terminal Section Control MATRIX sowing unit – 12 rows Dusdeyt Tdnopfx Agcsr Automatic tramline control Variable planting distance or sowing distance beside the tramline

Condition: new, MATRIX 1800 GEN II Grimme row seeder for sugar beets included as standard, additionally equipped with: Track loosener harrow Row spacing: 45 cm, 18 rows Duodpeyt Tdhjfx Agcer Mulch seeding unit Finger pressure roller Disc covering system Mechanical pressure support, 4-fold, up to 90 kg per seeding unit Additional pressure adjustment for tractor tracks up to 120 kg Spring-loaded pressure support for press roller, 3x reinforced Sugar beet kit – cell wheel, cover ring, ejection pin Seeder coulter with sidewalls made from Hardox, wear-resistant carbide plates underneath the coulter Lighting with warning panels Section control Automatic tramline switching Variable planting or seeding spacing next to the tramline Lower link mounting shaft, CAT. 3

Condition: new, MATRIX 1200 GEN II Grimme beet row drill Standard equipment, additionally with: Foldable track marker with serrated disc Row loosener: harrow Lower link shaft hitch, Cat. 3 Row spacing 45 cm Mulch sowing unit Finger pressure roller Disc row cleaner Mechanical pressure support, 4-way adjustable up to 90 kg Additional pressure adjustment for tractor track up to 120 kg Spring-loaded pressure support for press roller, 3-way adjustable Beet kit – cell wheel, cover ring, ejection pin Seeder coulter with Hardox steel sides and Djdoyt Tduspfx Agceur wear-resistant carbide underside plates Lighting and warning panels Operating manual according to country of use Without operator terminal Section Control MATRIX sowing – 12 rows Automatic tramline switching Variable planting or seeding distance next to the tramline

Condition: used, Year of construction: 2014, operating hours: 2,185 h, GL 420 (0010) Grimme potato planter (0020) * Hydraulic drive Djdpfxjyy Tkpo Agcjur (0030) * VC 50 operator terminal (0040) * MDA computer with hydraulic block (0050) * Fault indicator (0060) * Electric intensive agitator (0070) * 2000 kg tipping hopper (0080) * Green grid cups (0090) * Mechanically movable sieves (0100) * Row cut-off: 2 x mechanical, 2 x electric (0110) * Automatic tramline control (0120) * Furrow openers mounted in parallelogram linkage (0130) * Mechanical depth control of furrow openers (0140) via connection to ridge former. Furrow openers linked. (0160) * Disc marker (0170) * Hydraulic row marker with change-over valve (0180) * Liquid treatment kit (2 nozzles/row) (0190) * Short tine bar with ridge forming plate (0200) * 5 individually adjustable tines ahead of (0210) the covering discs (0220) * Hydraulically operated tramline clearers (0230) * Automatic hydraulic adjustment of tine bar (0240) from the control block (0250) * Tyres 7.50 - 16 AS (0260) * Lighting and warning panels

Condition: used, Year of construction: 2016, GL 420 Grimme potato planter Djdjyy D Ryjpfx Agcjur with standard equipment cage hilling rollers tramline markers

Condition: used, Year of construction: 2022, Equipment: compressed air brake, GL 430 0010 Used Grimme potato planter 0020 Operating hours / Area covered: approx. 465 ha 0030 Chassis no.: 25501691 0040 Year of manufacture: 2022 0050 Operating manual 0060 Incomplete EU type approval 0070 VC 50 control terminal and hydraulic block, 0080 without fault indicator, incl.: 0090 - electric intensive agitator/switch (on/off) 0100 and speed adjustment 0110 Power cut-off when lifting 0120 Hectare counter 0130 End of field function 0140 Power supply via ISOBUS connector 0150 Hydraulic drive of planting elements (single motor for all elements) 0160 ISOBUS operation via tractor or 0170 ISOBUS-compatible terminal 0180 K-80 ball hitch 0190 Long drawbar 0200 Automatic tipping hopper /kg Tipping hopper, flat/ 0220 Row spacing 75 cm 0230 Green grid cups 0240 Black drop-in cups for green planting cups 0250 Grids against contamination 0260 2x electric row shut-off 0270 Automatic tramline switching 0280 Large furrow openers 0290 and depth control via 2 sensing wheels outside 16x6.50-8AS 0300 Hydraulic depth control of furrow openers 0310 via potentiometer – sensing wheels omitted! 0320 4 sprung leaf-spring tines no. 4 in front of carrying wheels 0330 Track marker with tine 0340 Hydraulic track marker with changeover valve 0350 Liquid treatment kit 0360 Automatic speed-dependent adjustment and 0370 electric section control 0380 TS 820 rear, 2 tanks incl. rinsing tank, Dedpoyw Uwfjfx Agceur 0390 control elements and hose kit 0400 Pump for tank system, 0410 hydraulically driven with connection from block 0420 Fertilizer spreader incl. mounting frame 0430 Raised extension for fertilizer spreader 0440 Disc outlet 0450 Cover instead of tarpaulin plus filling chute 0460 Electric fertilizer spreader shut-off for tramline (2x) 0470 Hydraulic drive of fertilizer spreader 0480 Serrated covering discs, 510 mm, individually sprung 0490 Sprung tines with cage roller 0500 Tramline clears hydraulically operated 0510 Automatic hydraulic tine bar adjustment from hydraulic block 0520 4 carrying wheels, tire size 9.5-24 AS 0530 Oscillating axle 0540 Hydraulic axle steering with center finding via hydraulic block 0550 Air brakes 0560 Mounting parts including cable for existing camera 0570 Single-acting hydraulic connection with ball valve, 0580 e.g., for filling conveyor 0590 Lighting and warning panels 0600 Standard identification plate and stickers 2 nozzles per row 2x mechanical 500 mm disc Type: GL 430 Connection of the 4 furrow openers

Condition: used, Year of construction: 2022, operating hours: 100 h, MATRIX 1800 0010 Used Grimme Beet Drill 0020 Standard Equipment: 0030 Row spacing selectable: 45 or 50 cm 0040 Hydraulically folding frame 0050 Standard configuration for mulch seeding 0060 Parallelogram-guided seeding unit 0070 Mechanical pressure support, adjustable in four 0080 steps up to 0090 90 kg per seeding unit 0100 Electric cell wheel drive 0110 6 gauge wheels, size 5.00-15 Optical sensor for placement monitoring 0130 2 leading disc coulters with 0140 Farmflex depth control wheels 0150 Coulter with forward coulter extension 0160 Pendulum-mounted 0170 intermediate press wheel 0180 Disc coverers and finger press wheel 0190 10 l seed hopper 0200 Quick-empty flap 0210 Operation via ISOBUS 0220 Matrix 1800 0230 DE-Germany. Including operator’s manual 0240 in the official language 0250 9.00 m parallel frame 0260 hydraulically folding, 18 rows 0270 Tyres: 6 wheels 5.00-15 (1 double-acting spool valve required) 0290 Row markers foldable within 0300 the machine contour, serrated Duedpoyg Suxofx Agcer 0310 disc with ring 0320 Row looseners: tine harrow 0330 Linkage: lower link shaft, Cat. 3 0340 Row spacing 45 cm 0350 Mulch seeding unit 0360 Disc coverers 0370 Mechanical pressure support 0380 4-step adjustable up to 90 kg 0390 per seeding unit 0400 Spring-loaded pressure support 0410 for the press wheel, 2-step adjustable 0420 Beet kit – cell wheel, R6 0430 Deep placement coulter with high flanks 0440 with wear-resistant carbide plates 0450 Section Control machine licence 0460 VRC activation 0470 Tramline control with variable 0480 seeding rate adjustment next to 0490 the tramline 0500 Lighting and warning panels 0510 Rear support stand 0520 18 tramline markers 0530 Matrix seeding activation

Condition: new, operating hours: 100 h, Equipment: onboard computer, GL 420 0010 Grimme Potato Planter GL 420 0020 0030 Year of manufacture: 2025 0040 0050 GL 420 new 0060 Comfort package: Hydraulic individual row drive (1 hydraulic motor per row) 0070 including MDA computer with hydraulic block 0090 including row monitoring sensor 0100 Electric agitator/switch (on/off) and speed adjustment 0120 Power cut-off when lifting 0130 Hectare counter 0140 Electrical connection for granular applicator 0150 Power supply via ISOBUS plug 0160 Headland management function 0170 Without operator terminal 0180 ISOBUS operation via existing tractor or ISOBUS-compatible terminal 0200 including power supply via ISOBUS socket 0220 Rigid three-point linkage 0230 2,000 kg flat tipping hopper 0240 Row spacing 75 cm 0250 Green grid cups Dusdpfx Agox R Nn Secsr 0260 Short container floor grates 0270 Mechanically movable 0280 Automatic tramline switching 0290 Furrow opener pulled in parallelogram 0300 Hydraulic depth control of the furrow openers 0310 via potentiometer sensor wheels omitted 0320 Attachments for extending the furrow opener 0340 Row marker with disc 0350 Hydraulic operation of row marker with change-over valve 0360 Retrofit kit for furrow treatment: 2 nozzles per row. Including jet angle nozzles, 1 x front in the open furrow, 1 x rear in the soil flow of covering discs 0390 Additional parts in furrow opener for granulate application 0400 Serrated covering discs 510 mm, individually sprung 0410 Ridge forming system: Rigid tine with XL ridge former plate for one ridge circumference, welded former with attached stainless steel speed plates 0430 Stone protection for loosening tines on the tine bar 0440 PE liner for speed plates on XL ridge former plate 0450 2 hydraulic tramline clearers, individually operable right and left 0460 Height adjustment tine bar: Automatic hydraulic adjustment 0470 Tyres 7.50-16 AS 0480 Grimme video system consisting of 3 cameras, 7" multiplex monitor and holder 0500 Machine license section control 0510 Lighting and warning signs 0520 Work lights 0530 Standard nameplate and decals 0540 Operating manual 0550 Operating instructions for operator terminal 0560 Sprung loosening tines behind DFB

Condition: new, Year of construction: 2025, MATRIX 1200 (0010) Grimme Matrix 1200 GEN I 0.00m frame, parallel hydraulic (0030) Foldable, 12 rows. Tires: 4 wheels (0040) 5.00-150 (1 double-acting control unit required) (0050) DE. With B. Instructions in official language (0060) R.00.810 Bout marker within. Machine contour (0070) Serrated disc with ring (0080) R.00.830 Track eradicator: harrow (0090) R.10.820 Hitch, lower steering shaft, Cat. 3 (0100) R.30.810 Row spacing 45 cm (0110) R.40.820 Mulch seeding unit (0120) R.40.830 Finger pressure roller (0130) R.40.880 Disc closer (0140) R.40.900 Mechanical pressure support, 4-way adjustable (0150) Adjustable up to 90 kg per seeding unit (0160) R.40.925 Spring-loaded pressure support Dodewkx D Aspfx Agceur (0170) Pressure roller, 2-way adjustable (0180) R.40.930 Kit Beet cell wheel, cover ring, ejection pin (0190) R.40.944 Rapeseed cell wheel kit 3.1 mm, cover ring (0200) Ejection pin included (0210) R.40.975 Seed coulter with Hardox steel flanks and (0220) wear-resistant carbide plates on (0230) the underside of the seed coulter (0240) R.90.810 Lighting and warning signs (0250) B. Instructions defined by country of use (0260) I.100.205 Isobus control terminal - CCi 1200 (0270) I.100.430 Section Control - Section Control (0280) Terminal License (0290) I.110.100 Section Control (0300) I.110.150 Matrix Seeding 12 Rows (0310) I.110.300 Variable Planting or Seeding Distance (0320) next to the tramline

Condition: used, Year of construction: 2012, power: 360 kW (489.46 HP), maximum speed: 25 km/h, front tire size: Kette, rear tire size: 900/60R32, loading space volume: 22 m³, tire size: 900/60R32, Equipment: additional headlights, air conditioning, cabin, Tyres (front): track, tyres (rear): 900/60R32, row/unit distance: 75 cm, number of rows (4-row), beacon light, hectare counter, central lubrication, self-propelled, cleaning device, bunker or transfer bunker, haulm topper_____Self-propelled, 4 rows at 75 cm, 6 rows at 50 cm possible, digging units available, bunker 22 t, front mulcher FM 300, storage location: customer Duedsyzv Nqopfx Agcor

Condition: used, Year of construction: 2007, Equipment: compressed air brake, SE 150-60 NBR 0010 Used Grimme Potato Harvester 150-60 NBR 0030 Chassis No.: 41601718 0040 Year of manufacture: 2007 0060 Hydraulic axle steering 0070 Automatic axle centering 0080 Hydrostatic wheel drive 0090 Air brake 0100 Automatic ridge centering 0110 K 80 lower hitch 0120 Tyres 700/50-30.5 0130 Automatic slope compensation 0140 Central share unit 0150 Automatic ridge pressure reduction 0160 2nd disc coulter right 0170 V2A steel plates in oscillating frame 0180 Shaker on 1st sieving web hydraulically adjustable 0190 1st sieving web with 40 mm pitch 0200 2nd sieving web with 35 mm pitch 0210 Haulm separation shaft under GKB 0220 hydraulically driven 0230 Hydraulic adjustment for stripper combs 0240 Slip monitoring 2nd sieving web 0250 Slip monitoring 1st separator 0260 Electronic speed adjustment 1st and 0270 2nd separator 0280 Drive with 3-speed gearbox 0290 Drive 1000 rpm 0300 2nd platform with feed chute and 0310 cross discharge conveyor 0320 Automatic for pre-elevator 0330 Stone box with discharge belt 0340 3rd hedgehog belt with double smooth rollers 0350 Scraper for type NB 0360 Hedgehog belt for 3rd separator TLG-40 mm 0370 Roll-floor bunker extension 0380 Lowerable bunker head 0390 Operator terminal GBT 2100 0400 1st haulm belt with TLG 40 mm 0410 2nd haulm belt with TLG 40 mm 0420 2nd haulm belt with elevated hedgehog rods 0430 Row width 75 cm 0440 Intake 580 mm 0450 Ridge drum 390 0460 3-tine share 0470 Outer haulm intake rollers 0480 Coarse haulm belt 1644-327-40 spacing 280 mm Dusdpfx Agsyyrkuocer

Condition: new, Year of construction: 2012, operating hours: 4,810 h, TECTRON 410 Used Grimme Tectron 410 Haulm topper with discharge conveyor, hydraulic pressure relief, Duedpjyy Tlaofx Agcsr hydraulically height-adjustable support wheels, row spacing 75 cm, intake width 620 mm, 2-blade share, split share end piece for rows 3 and 4, intake conveyor with 40 mm pitch, rotor beater in the intake conveyor, 1st sieving belt with 35 mm pitch, cleaning shaft with rubber plates, hydraulically height-adjustable pull-off unit, 2nd sieving belt with 35 mm pitch, 3rd sieving belt with 35 mm pitch, Multi-Sep separator unit with segment rollers incl. 2 pull-off units, clod rollers, fine haulm elevator, autopilot via 2 trailing arms, stone guard track system, comfort package, video package (5 extra cameras), additional lighting speed 20 km/h, various spare parts commission sale machine -> available from 07.2026 approx. 4,810 h, 3,840 ha

Condition: used, Year of construction: 2017, working width: 150 mm, Equipment: compressed air brake, onboard computer, Number of rows: 2, Area performance: 1120, Number of rows (2-row), Trailed, Wide-angle PTO shaft, ridge center detection_____Drawbar eye coupling K 80, PTO shaft 1 3/8" with 6 splines, drive with PTO speed 540 rpm. Row spacing: 75 cm, Pickup width: 580 mm, Ridge drums: D=390 mm, 2-blade share, separately adjustable center share, digging depth adjustment from terminal, automatic ridge pressure control, automatic ridge center detection, 2 disc coulters, sieve channel width: 1500 mm, 1st sieve belt pitch 50 mm, pitch-independent agitator drive with support roller, stainless steel plates in the shaker frame, shaker beater on the 1st sieve belt with speed adjustment, 2nd sieve belt pitch 35 mm, pitch-independent agitator drive for 2nd sieve belt, coarse haulm conveyor spacing 280 mm, adjustment for comb scrapers from terminal, 1 haulm scraper shaft under the coarse haulm conveyor, hydraulic. XXL separation unit incl. speed adjustment for 2 brush / finger belts and height adjustment of stripper roller in the 1st separation unit, 1st separation unit pitch 40 mm, V-profile hedgehog rod, smooth roller stripper on the 1st separation unit, cleaning device in the hedgehog belt of the 1st separation unit, slip monitoring of 1st separation unit and 2nd sieve belt, 2nd separation unit pitch: 40 mm, V-profile hedgehog rod, smooth roller stripper 2nd separation unit, cleaning device in the hedgehog belt of the 2nd separation unit, speed adjustment 1st and 2nd separation unit from terminal, 3rd separation unit pitch 40 mm, V-profile hedgehog rod, height adjustment of finger/brush belt left and right, picking tables (1100 mm), foreign material conveyor (340 mm), pre-elevator with ultrasonic sensor, 7.5 t bunker with wide axle, bunker conveyor with canvas, bunker filling automatic incl. automatic for pre-elevator and fill optimization, bunker head lowering, air brake, automatic axle center detection and tilt control, tires 800/45-30.5, rear view camera, operator terminal VC 50 + joystick box, load-sensing, location: Customer Dusdpfx Aoyygl Tegcjr

Condition: used, Year of construction: 2012, loading space volume: 1,600 m³, number of beds: 2, Number of rows (4-row), rear mounted_____ - Hydraulic element drive - VC 50 operator terminal - GR 300 for combination mounting GL - Support roller (chevron ring) before soil cultivation - 1,600 kg fixed hopper - Hopper extension for 2,000 kg capacity - Row spacing 75 cm - Green planting cups - Electric intensive vibrator / switch on-off and speed adjustment - Mechanically movable grids - Row shutoff 2x electric Djdpfxoyx R Rws Agcjur

Condition: used, Year of construction: 1997, Equipment: compressed air brake, lighting, Number of rows: 2 (2-row), Ridge pressure roller / grid roller, Trailed, Steering axle, Support leg / wheel, Picking table, Wide angle PTO shaft, Ridge drum_____Overloading harvester, Sorting table, Top linkage, PTO shaft, Control unit, DL brake, Location: Customer Dedpfjyv Tacox Agcour

Condition: used, Year of construction: 2022, operating hours: 462 h, rear tire size: 710/50-30.5, loading space volume: 6,000 m³, tire size: 710/50-30.5, Equipment: lighting, Tyres (rear): 710/50-30.5, Operating hours: 462, Row/Body spacing: 75 cm, Trailed, Control terminal, Support leg/wheel, Load-dependent auxiliary hydraulic circuit (Power Beyond, Load Sensing), 540 rpm, Ridge alignment system, K80 ball-type hitch Ø 80 mm, PTO shaft 1 3/8" with 6 splines, PTO drive at 540 rpm, direct drive, Row width: 75 cm, Intake width: 580 mm, Ridge drums: Ø 390 mm, 3-blade long coulter, separately adjustable centre coulter, Depth adjustment from terminal, Automatic ridge relief, automatic ridge alignment, 2 disc coulters, additional external disc coulter, Screening channel width: 1,500 mm, 1st main web pitch 35 mm, variable-speed drive for 1st main web, with support roller, Speed of 1st web: fast, Stainless steel plates in oscillating frame, Oscillating agitator for 1st web with speed adjustment from terminal, 2nd web pitch 32 mm, pitch-dependent PU drive for 2nd main web, Trash conveyor distance 200 mm, 2 additional scrapers for trash conveyor, 1st separation device web pitch 40 mm, H-profile rod roller 1st separator, scraper for 1st separator smooth roller scraper, mechanical inclination adjustment for 1st and 2nd separation devices, height adjustment of scraper roller for 1st separator from terminal, slippage monitoring for 1st separator and 2nd web, Finger belt speed adjustment from terminal, 1st and 2nd separator speed adjustment from terminal, height adjustment of left finger belt from terminal, Speedtronic-Sep: automatic speed adjustment of separation devices, Additional infeed chute (right and left), Extra-wide picking table (930 mm) sorting belt (280 mm), Picking belt with carriers, adjustable sorting belt, differential speed for picking table, Stone bunker with discharge conveyor, Intake elevator with ultrasonic sensor, 6.0 t bunker, Bunker conveyor with fabric, Bunker filling automation incl. automation for intake elevator and optimized filling, Bunker head lowering, Automatic axle centring and automatic slope adjustment, 7" monitor and multiplexer for Grimme video system, 1x camera as reversing camera including illumination, 1x camera monitoring transfer from 1st to 2nd separator incl. illumination, 1x camera for picking table incl. lighting, 1x camera for bunker head incl. illumination, Control terminal VC 50 + joystick box, ISOBUS, Load-sensing kit with control line to tractor, Location: customer Dusdpfx Agoyvrhfscsr

Condition: used, Year of construction: 2003, _____Rear-mounted, 8 rows, long-distance driving device, 75 cm row spacing, support and guide wheels, track marker, storage location: customer Duodpfx Agjyvmr Escor

Condition: used, Year of construction: 2016, _____Hoeing machine, rear-mounted, ridging bodies, 4 rows, 75 cm, spring-loaded ridging bodies, track tines, single row formers, storage location: customer Dujdpfx Aoyvmr Sjgcor

Condition: used, Year of construction: 2019, operating hours: 1,021 h, Equipment: compressed air brake, onboard computer, EVO 290 NB 0010 Used Grimme potato harvester 0020 Side ridge intake with trailed ridge rollers 0030 Spring-mounted disc coulters 0040 Drawbar attachment for hitch (below PTO) 0050 Hydraulic support leg 0060 Hydraulic drawbar steering with automatic ridge center detection 0070 Automatic ridge relief 0080 Sieve channel width 1500 mm 0090 Sieve web with rod spacing of 28, 32, 35, 40, 45, or 50 mm (chain/belt connection) 0100 Stainless steel plates (V2A) in the shaker frame 0110 Sieve web (1st web) 28, 32, 35, 40, or 45 mm rod spacing 0120 Oscillating agitator on 1st sieve web with speed adjustment from terminal 0130 Coarse weed conveyor (200 or 280 mm spacing) 0140 Onboard hydraulics for TG drive 0150 Slippage monitoring of the first separating unit 0160 Height adjustment of scrapers 0170 1st separator controlled from the terminal 0180 Speed adjustment of the 2 finger conveyors from the terminal (with ClodSep separator) 0190 Speed adjustment 1st and 2nd TG from the terminal 0200 Adjustable mix-in conveyor 0210 Variable speed between sorting table and sorting conveyor 0220 Pre-elevator with ultrasonic sensor 0230 Discharge height of hopper: 4450 mm 0240 Automatic hopper filling 0250 Hopper capacity: 9000 kg 0260 Hopper filling automation incl. automation for pre-elevator and fill optimization 0270 2-stage motor for hopper emptying 0280 Warning system for tractor driver 0290 Tires: 710/50-30.5 0300 Hydraulic axle steering 0310 Automatic axle center detection and tilt control 0320 GDI, with ISOBUS diagnostic capability 0330 MemoryControl 0340 Air brake system and lighting 0350 Special equipment: 0360 Ball coupling Ø 80 mm 0370 PTO shaft with 6 splines 0380 PTO drive with 540 rpm 0390 Direct drive Dujdpsxdphijfx Agcor 0400 Row width: 75 cm 0410 Intake width: 600 mm 0420 Ridge rollers: Ø 390 mm 0430 2 long blade shares 0440 Separately adjustable center share 0450 Mechanical lifting depth adjustment 0460 TerraControl 0470 Automatic ridge center detection 0480 2 sieve channels, width 1500 mm 0490 1st sieve web, rod spacing 35 mm 0500 1st sieve web with chain link connection 0510 Partition-independent friction drive 0520 1st sieve web with support roller 0530 1st sieve web – high speed 0540 Stainless steel plates in shaker frame 0550 Oscillating agitator in 1st sieve web, speed adjustable from terminal 0560 2nd sieve web, rod spacing 32 mm 0570 2nd sieve web with chain link connection 0580 Partition-independent friction drive 0590 2nd sieve web, VarioDrive INNOVATION 0600 Coarse weed conveyor, 200 mm spacing 0610 Adjustment for cleaning combs from terminal 0620 Oil cooler for onboard hydraulics (recommended for use above 30° C) 0630 1st separator belt, rod spacing 40 mm 0640 H-profile spiked roller, 1st separator 0650 Scraper, 1st separator 0660 Smooth roller scraper 0670 Tilt adjustment 1st and 2nd separator 0680 Height adjustment of scraper roller 0690 1st separator control from terminal 0700 Angle adjustment of scraper roller, 1st separator, from terminal and 2nd sieve web 0710 Lateral discharge conveyor behind 1st separator 0720 2nd separator: spiked belt with rods 0730 2nd separator belt, rod spacing 40 mm 0740 H-profile spiked roller, 2nd scraper, smooth roller scraper 0750 Tilt automation 1st and 2nd separator 0760 Speed adjustment 1st and 2nd ... (text ends here)

Condition: used, Year of construction: 2008, front tire size: 2x 500/60-22,5, rear tire size: 2x 500/60-22,5, loading space volume: 733 m³, tire size: 2x 500/60-22,5, Equipment: onboard computer, Tyres (front): 2x 500/60-22.5, Tyres (rear): 2x 500/60-22.5, Area performance: 180, Onboard hydraulics, Trailed, Hydrostatic drive, Control terminal, Slope compensation, Stone protection, Sorting table, Ridge-centre detection, K80, Axle steering, Onboard hydraulics, Ridge pressure regulation, Ridge-centre detection, Drawbar steering, Own hydraulic system, Electrohydraulic control, Coarse weed belt, Slope compensation, Stone/clod separating unit, Sorting table, Storage location: Customer Duedpfsyfyw Ejx Agcsr

Condition: used, Year of construction: 2019, rear tire size: 800/45-30.5, total length: 1,200 mm, working width: 150 mm, loading space volume: 7 m³, tire size: 800/45-30.5, Equipment: lighting, onboard computer, Tyres (rear): 800/45-30.5, Number of rows: 2, Trailed, Support leg / wheel, Sorting table, 540 rpm, Ridge center detection, K80 hitch, Hour meter_____Working width: 150 cm, Tyres (rear): 800/45-30.5, Length: 1200 cm, On-board computer / monitor, Automatic filling, Lighting/warning boards, Ridge pressure roller / cage roller, Compressed air brake, Stone trap, Control terminal, Rotating beacon, Shares, Disc coulters, Height adjustment, Stone protection, Support leg / wheel, Canopy / weather roof, Wide-angle PTO shaft, Hectare counter, Rear attachment, 540 rpm, Bunker or transfer bunker, Automatic axle center detection, Ridge drum, Depth control, Centre share, K80 hitch, Hour meter, Location: Customer Dodjx Rtgfopfx Agcour

Condition: used, Year of construction: 2024, operating hours: 1,039 h, Equipment: compressed air brake, onboard computer, EVO 280 (0010) Grimme EVO 280 Gen II (0020) Variant EVO 280 ClodSep (0030) Country of use: Germany (0040) Equipment for Germany (0050) (Collection) (0060) Full vehicle approval (0070) EU type approval (0080) Comfort-Line equipment package (0090) Hitch: ball coupling Ø 80mm (0100) Drive shaft (spline) drive shaft with 6 teeth (0120) PTO speed drive with (0130) PTO speed 1000 rpm (0140) Drive: fully hydraulic drive (0150) of all sieving belts and separating units (0160) Transmission: direct drive unit (0170) Intake width: 600mm (0180) Ridge rollers: Ø 390mm (0190) Spade share: 2-blade, long share (0200) Separately adjustable center share (0210) instead of middle disc coulters (0220) Stone protection for spade share (0240) Digging depth adjustment (0250) Digging depth adjustment from the terminal (0260) Depth control: TerraTronic (0270) Automatic ridge center recognition disc coulters (0290) Sieve channel width: 1500mm (0300) Sieve web pitch: 40mm (0310) Web connection: 1st sieve web with (0320) Locking connection (0330) Drive 1st sieve web: (0340) Pitch-independent friction drive for 1st sieve web with support roller (0360) V2A (stainless steel) sheets in shaker frame (0370) Shaker in 1st sieve web with (0380) Speed adjustment from terminal (0390) Sieve web pitch: 32mm (0400) Web connection: 2nd sieve web with (0410) Drive 2nd sieve web: (0420) Pitch-dependent PU positive drive for 2nd sieve web (0440) Coarse weed web spacing: 200mm (0450) Front retaining spring coarse weed web, standard version (0470) Adjustable stripper combs from the terminal (0490) Haulm shaft under coarse weed web (0500) Oil cooler for self-contained hydraulic system (0510) Web pitch 1st separation unit: 40mm Dujdsyg St Iepfx Agcsr (0520) H-profile rubber finger rod 1st separation unit (0530) 1st separation unit: smooth roller stripper (0540) Tilt adjustment 1st and 2nd separation unit from terminal (0560) Height adjustment stripper rollers 1st separation unit from terminal (0580) Angle adjustment stripper roller 1st separation unit from terminal (0600) Slip monitoring for 1st separation unit and 2nd sieve web (0620) Trash discharge belt behind 1st separation unit (0640) 2nd separation unit: finger belt with rods (0650) 2nd separation unit pitch: 40mm (0660) H-profile rubber finger rod 2nd separation unit (0670) Stripper 2nd separation unit, smooth roller stripper (0690) 2nd separation unit triple stripper roller (0700) Speed adjustment for ClodSep separation unit (upper/lower belt): (0720) Speed adjustment for 2 brush/finger belts (0740) from the terminal (0750) Automatic tilt adjustment 1st and 2nd separation unit (0770) Speed adjustment 1st and 2nd separation unit from terminal (0790) Angle adjustment stripper roller 2nd separation unit from terminal (0810) 3rd separation unit: finger belt with plates (0820) 3rd separation unit ClodSep (upper belt) (0830) Separation unit: two double-row finger stripper belts (0850) Stripper 3rd separation unit: smooth roller/spiral roller stripper (0870) Stripper 3rd separation unit: double stripper roller (0890) Finger belt design: V-shaped finger arrangement for higher throughput (0920) Height adjustment of finger belt, right and left, from terminal (0940) Height adjustment of stripper rollers from 2nd separation unit from terminal

Condition: used, Year of construction: 2023, operating hours: 1,122 h, Equipment: compressed air brake, onboard computer, Grimme EVO 280 (0010) Used Grimme potato harvester (0020) Full EU type approval (0030) Comfort-Line (0040) K80 ball hitch (0050) Drive with PTO speed 540 rpm (0060) PTO shaft 1 3/4" with 20 splines (0070) Direct drive, row spacing 75cm (0080) Intake width 580mm, ridge drums 390mm (0090) 2-blade long share (0100) Separately adjustable center share (0110) in place of middle coulter discs (0120) Harvesting depth adjustment via terminal (0130) Automatic ridge relief (0140) Automatic ridge center finding (0150) 2 coulter discs (0160) Additional external coulter disc (0170) Sieving channel width 1500 mm (0180) 1st sieve web pitch 40 mm (0190) 2nd sieve web pitch 35 mm (0200) VarioDrive: stepless drive for the 1st and 2nd sieve webs (0220) Coarse weed belt spacing 280 mm (0230) Adjustment for stripper combs via terminal (0250) 1 haulm stripper shaft under the coarse weed belt, hydraulically driven (0270) Oil cooler for on-board hydraulics (0280) Web 1st separation unit pitch 40 mm (0290) H-profile rubber finger rods 1st separator (0300) Scraper for 1st separator smooth roller scraper (0320) Tilt adjustment for 1st and 2nd separator via terminal (0340) Height adjustment for scraper roller 1st separator via terminal (0360) Cleaning device in the finger web of the 1st separator (0380) Angle adjustment for scraper roller 1st separator via terminal (0400) Slippage monitoring 1st separator and 2nd sieve web (0420) Discharge conveyor for foreign material behind first separator (0440) 2nd separator: finger web with rods (0450) Web 2nd separator pitch 40 mm (0460) H-profile rubber finger rods 2nd separator (0470) Scraper 2nd separator smooth roller scraper (0490) Triple scraper roller (0500) Automatic inclination control 1st and 2nd separator (0510) Speed adjustment 1st and 2nd separator from terminal (0530) Angle adjustment for scraper roller 2nd separator via terminal (0550) 3rd separator: finger web with rods (0560) EasySep(NB) separator: roller scraper (0570) Band 3rd separator pitch 40 mm (0580) H-profile rubber finger rods 3rd separator (0590) Height adjustment for scraper rollers 2nd and 3rd separator from terminal (0610) Turbo Clean (0620) Picking table (1100 mm) (0630) Comfort package picking table PRO (0640) Illumination for picking table (0650) Picking belt with carriers (0660) Intake elevator with ultrasonic sensor (0670) 8.0 t bunker, bunker belt with fabric (0680) Automatic bunker filling including automatic system for intake elevator and filling optimization (0710) Bunker head lowering, pneumatic brakes (0720) Permitted maximum speed 40 km/h (0730) Automatic axle centering and inclination control (0750) Tyres 850/50 R30.5 (0760) Telescopic axle for left rear wheel (0780) Multifunction lever (ISOBUS capable) (0790) instead of right-hand joystick box (0800) Mineral oil (0810) Load-sensing kit with control line to tractor (0830) Operator’s manual already defined by country of use (0850) Operator’s manual terminal in German (0860) ISOBUS basic equipment (0870) ISOBUS terminal - CCI 1200 (0880) Memory Control (0890) SmartView monitor (0900) SmartView PRO camera package (0910) Visual Protect Pro - function monitoring (0930) Speedtronic-Web: ground speed- and load-dependent sieve web control (0960) Speedtronic-Sep: Automatic Duodpfx Ageytkgyocsr

Condition: used, Year of construction: 2023, Long-distance drive unit, front and rear mounting, lighting, PTO shaft, support wheels, counter blade, storage location: customer Duodjyuab Aopfx Agcsr

Condition: used, Year of construction: 2005, Equipment: compressed air brake, lighting, Number of rows: 2, Number of rows (2-row), Trailed, Steering axle, Support foot / wheel, Wide-angle PTO shaft, Ridge roller, Depth control_____Overloader, 2 rows, 75 cm row spacing, Lighting, Ridge pressure regulation, Operator terminal, Drawbar eye, PTO shaft, Share depth control, Location: Customer Duodpfx Asyt Ab Aogcor