Used Swap Bodies With Flatbed for sale (121)

Condition: used, maximum load weight: 12,200 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,240 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, loading space volume: 43 m³, total length: 7,450 mm, total width: 2,600 mm, total height: 2,720 mm, Year of construction: 2016, Vehicle No. G0123006_1 – Manufacturer: Schmitz. Gsdpfsz H Hfhex Afdjbu * Floor: Aluminum floor * Double-deck configuration * Simple corner fittings * Rear door design: Rear portal doors * Contour marking, side/rear * Refrigeration unit * Loading beams * Portal door with double twist-lock closures (external) * Forklift accessible * Front wall niche * Telescopic support legs * Temperature recorder * Temperature recorder * Locking rods on rear doors: 2 * Device for rail loading * Lashing points * ATP certificate – new. External thermometer / analog. Leakage test – new. Double-deck configuration without double-deck loading beams (available at an extra cost!). Financing available upon request. Financing possible. Flat fuel tank 60 L / Note: Flat tank extends the box!. Rear portal / portal door with simple twist-lock closures / external, made of stainless steel. Delivery time: IMMEDIATELY. Portal door with double twist-lock closures (external). Solar panel for monitoring start-up voltage – new. Technically ready for use, no further repairs required. Partial paint job. Temperature recorder / DATACOLD incl. printer. Temperature recorder test – new. Test run down to -18° C – ok!. Undercarriage galvanized. Valid safety inspection certificate. Safety inspection documents available. PAINT – NEW!!!. Available in multiple units!. Dimensions are approximate. Offer subject to change; sale is subject to prior sale. Prices are net ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 14,050 kg, overall weight: 16,000 kg, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2006, Vehicle No. G0122419_1 – Manufacturer: Krone. * Support legs fixed * Device for rail loading * Lashing recesses Gbodpfx Afjz A Rr Dodou * Lashing points Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use, no further repairs required. Substructure with signs of wear and tear, some surface rust. Isolated paint chipping on components of the swap body. Isolated surface rust on components of the swap body. Deformations/stops on components – see pictures. Available in multiple units! Dimensions are approximate. Offer subject to change; we reserve the right to sell in the meantime. Prices are net, ex works D-59302 Oelde. Further details upon request by telephone or email.

Condition: used, maximum load weight: 13,320 kg, overall weight: 16,000 kg, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2006, Vehicle No. G0123309_1 – Manufacturer: Krone. * Double corner fittings * Roller shutter door (aluminium) Gbsdjz A Rl Dspfx Afdeu * Suitable for forklift access * Fixed support legs * Equipment for rail loading Delivery time: AVAILABLE IMMEDIATELY. Undercarriage with signs of use, partial onset of rust. Occasional paint chipping on components of the swap body. Isolated rust formation on parts of the swap body. Deformations/impact marks on components – see photos. Dimensions are approximate. Offer is non-binding, subject to prior sale; prices are net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, maximum load weight: 13,340 kg, overall weight: 16,000 kg, first registration: 01/2008, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2008, Wagon No. G0123913_1 – Manufacturer: Krone. * Double corner fittings * Suitable for forklift trucks Gbjdpjz A Rnxsfx Afdeu * Fixed support legs * Equipped for rail loading Delivery time: IMMEDIATELY AVAILABLE. Technically operational condition, no further repairs needed. Subframe shows signs of use and partial surface rust. Isolated paint flaking on parts of the swap body. Occasional rust on components of the swap body. Deformations/impact marks on components—see pictures. Dimensions are approximate. Subject to prior sale, quotation non-binding. Prices are net ex stock D-59302 Oelde. Further information available upon request by phone or email.

Condition: used, first registration: 01/2000, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 2,700 mm, 3x BDF plywood box containers, interchangeable system. Dimensions: 7.30 x 2.44 x 2.70 m. Gbedpfezttybox Afdou 3x lashing bars, new, estimated. Price per unit: 900 euros net, fixed price. =Daily purchase of commercial vehicles, as well as trade-ins possible.=

Condition: used, maximum load weight: 13,200 kg, overall weight: 16,000 kg, first registration: 04/2016, loading space length: 7,040 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 38 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2016, WhatsApp WECON Curtainsider Sliding-Platform-BDF Swap body Duke type WPR 715 SG Year of construction German first ownership! 4 pieces WPR 715 SG with the following equipment: WECON standard sliding curtainsider swap body Duke type WPR 715 SG External dimensions Body length: 7,150 mm Body width: 2,550 mm Interior dimensions Body length: 7,040 mm Body width: 2,480 mm Tare weight: 2,590 kg Permissible total weight: 16,000 kg Interior height 2,200 mm with sliding roof included External height 2,450 mm (corner height 2,450 mm = C 00) Side loading height: 2,120 mm Rear through-loading height: 2,165 mm Forklift pockets at the rear in the floor frame Gedju Uxr Rjpfx Afdjbu Reinforced version of the zinc tubes for carrying a truck-mounted forklift. Bracket required for securing chains on the body. --> Limited centering tunnel due to reinforced design Suitable for continuous use! Floor frame: Made of galvanized quality steel, height 215 mm, Container corner fittings 4-fold on 20' base, 4 gripping edges acc. to EN 284, wheel freewheel 120 mm Floor covering for swap bodies: Multi-glued plywood floor approx. 25 mm thick, can be driven on with a forklift truck, suitable for an axle load of up to 5,460 kg Rigid support legs, parking height 1320 mm, galvanized version 15 pairs of lashing rings. Distribution: From VK STW to the middle of the 1st pair of lashing rings approx. 400 mm, then even distribution of the remaining lashing rings Lashing rings, 1 pair, mounted on the inclusive inside of the end wall stanchion Height 1000 mm from top edge of floor Pallet stop edge 30 mm high on one side on the left in the direction of travel, normal tarpaulin side. Lashing options through slotted holes (approx. 15 x 30 mm) Distance between slotted holes approx. 200 mm. The loading height is reduced by 30 mm. Front wall: smooth, bolted steel front wall, full height in cassette construction (galvanized cassettes) Screen printing plate on the inside of the front wall 1500 mm high, 12 mm thick Front wall inside with collision protection consisting of 300 mm high, galvanized sheet steel Portal double wing door smooth, sandwich, 4 internal espagnolette locks, 4 hinges per door wing. Left-hand side panel sliding tarpaulin in accordance with DIN EN 12641-2: quality 890 g/m², belt grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN. VA belt buckle with pressure safety device. 1 central stanchion, symmetrically arranged --> left-hand direction of travel Stanchions each with 3 rows of slat pockets included and one row of collection pockets (approx. 600 mm high) on the floor 8 aluminum insertable slats, driving direction left, approx. 100 mm high Wecon RAPIDO RIGHT vertical steel profiles attached to the side tarpaulin and guided by rollers in the upper and lower running rails. - Vertical tarpaulin tensioners are omitted - Center stanchions are omitted - Horizontal insertion slats are omitted Fixed tarpaulin roof design as sliding roof Standard only fixed. Canopy with side-by-side running rails, width between the running rails approx. 2,370 mm, distance from lower edge of running rail to lower edge of bows approx. 90 mm Coating: Base frame and support legs hot-dip galvanized, superstructure parts dip primed and powder-coated in a standard RAL color, Roof tarpaulin: RAL 9010 (pure white) Side tarpaulin: RAL 9010 (pure white) Front wall: RAL 9010 (pure white) Rear portal: RAL 9010 (pure white) TÜV certificate Code XL included The certificate confirms the load securing effect of the ve

Condition: used, maximum load weight: 12,780 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,670 mm, loading space width: 2,470 mm, loading space height: 2,745 mm, loading space volume: 52 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2016, Vehicle No. G0124136_1 – Manufacturer: Krone. Godpfx Ajz Hhzqefdebu * Simple corner fittings * Insertion bar (aluminum) * Outline marking on the side/rear * Load certificate Code-XL * Keyhole system inside * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing recesses * Lashing options Financing available upon request. Delivery time: IMMEDIATELY. New tarpaulin. Newly painted. Technically ready for use, body and support legs newly painted. Door seals NEW! Undercarriage (KTL) cleaned and treated with underbody protection. Valid UVV (occupational safety inspection). UVV documents available. The interchangeable body has been newly painted in pure white (RAL 9010). PAINT NEW!!!. LASI CODE XL!!!. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request via telephone or email.

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/1995, loading space length: 7,050 mm, loading space width: 2,400 mm, loading space height: 2,400 mm, total length: 7,150 mm, Interchangeable body: Box body + sliding tarpaulin + drop-side panels Tare weight: approximately 2,600 kg Gross vehicle weight: approximately 16,000 kg Body length: 7,150 mm Internal dimensions: approx. 7,050 x 2,400 x 2,400 mm Gbodpfx Afszwagcodou No identification plate - year of manufacture unknown!

Condition: used, maximum load weight: 13,250 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,995 mm, loading space volume: 57 m³, total length: 7,820 mm, total width: 2,550 mm, total height: 3,150 mm, Year of construction: 2016, Vehicle No. G0123106_SAMPLE – Manufacturer: WECON. * Simple corner brackets * Insertion bar (aluminum) * Contour marking, side/rear * Load certificate, Code-XL * Mechanical lift roof * Portal door with double rotating bar locks (inside) * Side sliding tarpaulin * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing recesses * Lashing points * Perforated pallet stop rail Gedez A Rk Tjpfx Afdebu LASI CODE XL!!!. Delivery time upon consultation. Tarpaulin is used. Technically ready for operation without further repairs. Substructure is galvanized. Valid UVV (accident prevention regulations). UVV documents available. Isolated paint flaking on components of the swap body. Deformations/stops on components – see pictures. Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details upon request by telephone or email.

Condition: used, overall weight: 16,000 kg, first registration: 01/2020, loading space length: 7,359 mm, loading space width: 2,496 mm, loading space height: 2,505 mm, Year of construction: 2020, WECON WPR – INTERCHANGEABLE PLATFORM – GALVANIZED – VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Wecon Interchangeable Platform – Year of Manufacture 2020 * Internal dimensions: 7.359 m L × 2.505 m H × 2.496 m W * Interchangeable platform * Year of manufacture 2020 * Permissible total weight: 16,000 kg * Unladen weight: 2,450 kg * Stainless steel support legs * Galvanized frame * Height from the ground: 1.22 m ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 € - 2000 € EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (AUTHORIZED EXPORTER), 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 Gbsdpezz Effsfx Afdsu TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU and non-EU countries, a deposit of at least 500.00 € / 1,000.00 € will be charged. Subject to change, errors and prior sale! You can find more vehicles on our website. Sales are exclusively subject to our general terms and conditions – see homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the purpose of initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: used, maximum load weight: 12,420 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,775 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,000 mm, Year of construction: 2012, Wagon No. G0114002_1 - Manufacturer: Krone. * Simple corner fittings * Roller shutter door (aluminum) * Internal keyhole system * Side walls with partially integrated folding tables * Forklift accessible * Front wall recess * Fixed support legs * Device for rail loading * Lashing points Storage container, weatherproof and secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATE AVAILABILITY. Technically ready for operation with no further repairs required. Subframe shows signs of use, some areas with onset of rust. Isolated paint flaking on swap body components. Occasional rust on swap body components. Deformations/impacts on components/see images. Several units available! Dimensions are approximate. Offer is subject to prior sale, prices quoted are net ex location D-59302 Oelde. For further details, please enquire via phone or email. Gsdjz A Rrqspfx Afdobu

Condition: used, maximum load weight: 15,190 kg, axle configuration: 2 axles, first registration: 07/2016, Equipment: ABS, Kögel – SAF axle drawbar trailer + Krone WAB side walls Everything at a glance: · First registration: 07/08/2016 · Color: Gray · Tare weight: 2,810 kg trailer · Payload: 15,190 kg · Tires: 385/55 R 22.5 · Note: Available immediately Special equipment: Gbodpfx Asz Htgljfdou · Drawbar trailer · Krone interchangeable platform with 70 cm high side walls and 9 lashing points · Adjustable drawbar · SAF axles · Underrun protection · ABS · EBS · 1 x 15-pin electrical connection · A-frame Standard equipment: · 2-axle · Lifting and lowering valve Errors, typos and prior sale are subject to change. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Any use, reproduction or distribution – even in excerpt – is not permitted without express written consent. _____ Internal number for inquiries: TR26277 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact persons for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. We probably speak yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as semi-trailer tractors, trailers, trucks and vans. Contact persons for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2014, loading space length: 7,290 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2014, Wagon no. G0101011_1- Manufacturer: Krone. * Double-decker equipment * Double corner fittings * Contour marking side/rear * Load certificate Code-XL * Portal door double espagnolette locks (outside) * Keyhole system inside * Forklift accessible * Telescopic support legs * Device for rail loading * Lashing recesses * Lashing options Gbedpfxsz A Rtuj Afdju Double-decker equipment without double-decker loading beams (available at extra cost!). Financing on request. Financing possible. NEW paint finish: Color selection in RAL. color possible when ordering! Delivery time after consultation! Technically ready for use, body and support legs newly painted. Door seals NEW ! Underbody (KTL) cleaned and provided with underbody protection. UVV valid. UVV documents available. Swap body has been repainted in pure white (RAL 9010). Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details on request by phone or e-mail:

Condition: used, axle configuration: 3 axles, first registration: 10/2015, Equipment: ABS, 6 units available, optionally with BDF bridge coupling; 6 units available. Gbedpfxez I Hq To Afdju

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Container No. G0123027 – Manufacturer: Kögel. * Sliding roof cover * Double corner brackets * Insert strip (wood) * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double rotating bar locks (inside) * Side sliding cover * Forklift-accessible * Fixed support legs * Device for rail loading * Lashing points Godjz N Rcwepfx Afdebu * Perforated pallet stop strip Used roof cover. Financing available upon request. Financing possible. Storage container, weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY. Multi-lock outer frame. Cover used. Technically ready for use, no further repairs required. Substructure with signs of use. Valid safety inspection certificate. Safety inspection documents available. Interchangeable container with lettering (see photos). LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 12,980 kg, overall weight: 16,000 kg, first registration: 01/2016, loading space length: 7,710 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,180 mm, Year of construction: 2016, Vehicle No. G0123199 – Manufacturer: Krone. * Simple corner brackets * Insertion bar (aluminum) * Rear contour marking * Mechanical lift roof * Pallet stop bar * Portal door with double rotating bar locks (inside) * Side sliding tarpaulin * Forklift-accessible * Device for rail loading * Lashing recesses * Lashing points Gjdez A Rppepfx Afdobu * Perforated pallet stop bar Storage container – weather-resistant, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Multi-Lock outer frame. Tarpaulin/roof tarpaulin used/labeled, with repair spots, partially damaged (see photos). Tarpaulin used. Substructure with signs of use, partially with rust. Isolated paint chipping on components of the swap body. Isolated rust on components of the swap body. Deformations/stops on components – see images. Swap container with labeling (see photos). Dimensions are approximate. Offer subject to change; subject to prior sale. Prices are net ex works D-59302 Oelde. Further details available upon request via telephone or email.

Condition: used, maximum load weight: 13,140 kg, overall weight: 16,000 kg, first registration: 01/2012, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2012, Wagon No. G0117899_1 - Manufacturer: Krone. * Load Certificate Code-XL * Roller shutter door (aluminum) * Keyhole system inside * Suitable for forklift entry * Fixed support legs * Equipment for rail loading * Lashing points Gbsdpfjz A Rh Esx Afdou Storage container, weatherproof and secure, lockable, floor in good condition, with no further repairs required. Delivery time: IMMEDIATELY. Technically operational condition, no additional repairs needed. Undercarriage shows signs of wear, partial surface rust. Occasional paint peeling on swap body components. Isolated rust formation on swap body parts. Deformations/dents on components - see photos. Several units available! Dimensions are approximate. Offer subject to prior sale, prices net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, overall weight: 16,000 kg, first registration: 04/2016, Year of construction: 2016, Visit our website, where you will find our complete vehicle inventory with many more photos and information in several languages. SEL 8478 Krone WP 7.3 LS5-CS/BW EDSCHA | Aluminum side panels OVERVIEW Year of manufacture: 04.2016 Color: Blue SPECIFICATIONS Gross vehicle weight (kg): 16,000 Unladen weight (kg): 2,580 VIN: W0703924 OTHER SPECIFICATIONS EDSCHA Aluminum side panels BODY Measure Inside Outside: Internal dimensions Height (m): 2.51 / 2.38 Gjdpjz Axpasfx Afdebu Width (m): 2.48 Length (m): 7.3 VEHICLE DOCUMENTS & INSPECTION No road registration Our vehicles are sold in "as is" condition. We invite customers to visit our company to personally inspect the condition of the vehicle. In addition, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are the ones currently installed. If the customer desires new batteries, we are available to provide pricing information. CONTACT PERSONS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Liza Obodynska Ukrainian, Russian, English Jovana Marjanovic Bosnian, German, English j.

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,300 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 2,500 mm, Year of construction: 2013, Wagon No. G0113716_1 – Manufacturer: Krone. * Simple corner fittings Gjdpfxjz A Rlwe Afdsbu * Suitable for forklift access * Fixed support legs * Equipment for rail transport * Lashing pockets * Lashing options Financing on request. Financing available. NEW paintwork: RAL color of your choice possible when ordering! Delivery time upon consultation! Newly painted. Technically ready for operation, superstructure and support legs newly painted. Chassis (KTL) cleaned and treated with underbody protection. UVV valid. UVV documentation available. NEW PAINT!!! Dimensions are approximate. Offer subject to prior sale, prices are net ex location D-59302 Oelde. More details upon consultation via phone or email:

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2017, Container No. G0123196 – Manufacturer: Kögel. * Sliding roof tarpaulin * Double corner fittings * Insertion strip (wood) * Multi-hole strip * Portal door with double rotating bar locks (inside) * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing recesses * Lashing points * Perforated pallet stop strip Storage container – weatherproof, securely sealed, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY. Multi-lock outer frame. Substructure with signs of wear, partially with some surface rust. Isolated paint flaking on components of the swap body. Isolated surface rust on components of the swap body. Deformations/stops on components – see pictures. Swap container with lettering (see photos). Gbjdpfxez A Rnfe Afdeu Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: used, overall weight: 16,000 kg, first registration: 02/2002, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,690 mm,

Condition: used, maximum load weight: 13,370 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Vehicle No. G0123008 – Manufacturer: Krone. * Sliding roof cover * Insertion bar (aluminum) * Outline marking on the side/rear * Load certificate Code-XL * Portal door with double rotating rod locks (inside) * Side sliding cover * Forklift accessible * Fixed support legs * Device for rail loading * Lashing recesses * Lashing options Financing available upon request. Financing possible. Storage container – weather-resistant, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Cover is used. Technically ready for operation without further repairs. Substructure (KTL) coating with signs of use. Valid UVV certificate. UVV documentation available. Isolated paint peeling on components of the swap body. Deformations/stops on components – see images. LASI CODE XL!!! Gbodpfoz A Rq Hox Afdeu Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request; please contact us by telephone or email.

Condition: used, overall weight: 16,000 kg, first registration: 08/2010, Year of construction: 2010, Visit our website, where you will find our complete vehicle inventory with many more photos and information in several languages. SEL 8471 Kögel ENCS 74 Aluminum side panels OVERVIEW Year of manufacture: 08.2010 Country of registration: Germany Color: Blue SPECIFICATIONS Permissible total weight (kg): 16,000 Unladen weight (kg): 2,581 VIN: WK0E00047400134566 OTHER SPECIFICATIONS Aluminum side panels Previous owner data digitally deleted Gbjdpjzuqzljfx Afdju BODY Internal dimensions Height (m): 2.53 / 2.43 Width (m): 2.46 Length (m): 7.34 Our vehicles are sold in their current condition. We invite customers to visit our company to inspect the vehicle's condition in person. We also offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are the ones currently installed. If the customer requires new batteries, we are available to provide pricing information. CONTACT PERSONS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Liza Obodynska Ukrainian, Russian, English Jovana Marjanovic Bosnian, German, English j.

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,270 mm, loading space width: 2,425 mm, loading space height: 2,740 mm, loading space volume: 48 m³, total width: 2,550 mm, total height: 2,980 mm, Year of construction: 2007, Vehicle No. G0123602_1 – Manufacturer: Spier. * Double corner brackets * Roller shutter door (aluminum) * Side walls with partially integrated folding tables * Forklift accessible * Front wall niche * Fixed support legs * Device for rail loading Storage container – weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Substructure galvanized. Isolated paint chipping on components of the demountable body. Deformations/stops on components – see pictures. Dimensions are approximate. Offer subject to change; sale is reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email. Gedpfx Aoz A Rqaofdebu

Condition: used, maximum load weight: 28,295 kg, overall weight: 30,480 kg, first registration: 01/2024, loading space length: 5,895 mm, loading space width: 2,345 mm, loading space height: 2,392 mm, total width: 2,440 mm, total height: 2,600 mm, 20' (6m) Shipping Container - 2x Forklift pockets - 1x Double door (one side with two locking bars, one side with a single locking bar) - 1x Anti-theft lock device Total weight: 30,480 kg Tare weight: 2,185 kg Gjdev D Smxjpfx Afdsbu Payload capacity: 28,295 kg External dimensions: Length: 6,060 mm Width: 2,440 mm Height: 2,600 mm Internal dimensions: Length: 5,895 mm Width: 2,345 mm Height: 2,392 mm Includes 5 lashing rings per side on the floor (total 10) >> Sample images, several units available