Used Special Construction Machinery for sale (820)

Year of construction: 2013, condition: used, Please provide reference number upon request: 21650 Description: We have a 2013 Wessex RMX560 lawn mower for sale. It is a tri-deck design with three cutting decks for smooth cutting. The cutting width is 5.6 meters and is designed for efficient and even mowing of large areas such as golf courses, sports facilities and public green areas. Cgodoxq Dp Iepfx Ahysr Ready for delivery Own weight: 1 Model: RMX560 gressklipper = More information = Please contact ATS Norway for more information

Year of construction: 2012, condition: used, Please provide reference number upon request: 21360 Specifications: - 2012 model - S70 attachment - Max Working Pressure 220 bar - Max rotation pressure: 35 bar - 1838 kg - Ready for delivery   Description: We have a 2012 Trevi benne BVR15E rotating sun bucket w/ S70 attachment for sale. Sun lounger has been used very little for its age and has always been stored inside after use. Everything works as it should, according to the owner. Cgjdpfxoxdrt Ie Ahyjr Own weight: 1838 Model: BVR15E = More information = Serial number: vxxxx Please contact ATS Norway for more information

Year of construction: 2021, condition: used, Please provide reference number upon request: 21665 Specifications: 2021 model Weight: 1011 kg S60 attachment Ready for delivery Description: We have a 2021 Hardlife 100-SC-NL Hydraulic Solder Bucket w/ S60 Attachment for sale. Everything works as it should and the drawer has been used little according to the owner. Ready for delivery Csdpfx Ahsxq Df Nsyegr Own weight: 1011 Model: 100-SC-NL hydraulisk soldeskuffe m/ S60 feste = More information = Serial number: mz20210422xxxx Please contact ATS Norway for more information

Condition: used, Please provide reference number upon request: 21085 Description:Various laboratory equipment supplied by HECO for stone quality control.Sold together with the container.The equipment was recently in use and is functioning properly.A complete equipment list is attached as an image.Quick delivery possible. Own weight: 3000 Model: Laboratorieutstyr til steinprøver Cgsdpfx Asw Nvgdehyor = More information = Please contact ATS Norway for more information

Year of construction: 2002, condition: used, Please provide reference number upon request: 20126 Specifications: Model Year: 2002 230V 4 amp settings: 60, 100, 150, and 200 Cuts all types of steel Cgedpfxswaf Tco Ahysr Plate size: up to 2500x6000 mm Recently replaced drive motors Description:This is an Esab UXE-P 3500 with both plasma and gas burner on the same carriage. You can choose between 4 amp settings depending on the thickness of the steel to be cut: 60 amp, 100 amp, 150 amp, and 200 amp. It can cut all types of steel, including aluminum, stainless/acid-resistant, Hardox, and regular mild steel from 2 mm to 30 mm. With the gas burner, you can cut thicknesses up to 150 mm.Plasma and gas burner can also be operated simultaneously. The machine can handle plate sizes up to 2500x6000 mm.It has been regularly serviced, and the drive motors have recently been replaced. = More information = Serial number: 2020xxxx Please contact ATS Norway for more information

Year of construction: 2020, condition: used, Please provide reference number upon request: 22191 Specifications: 2020 model Weight: 950 kg Mounting for truck, tractor and wheel loader Display replaced Description: 2020 Vama PA 4.2 pole setter.Suitable for use on trucks, tractors and wheel loaders.According to the owner, it has installed just under 10,000 poles.The display has been replaced.Available for delivery on short notice. Cedoya Ubuspfx Ahyegr Own weight: 950 Model: 2020 Vama PA 4.2 Stikkesetter = More information = Serial number: 240xxxx Please contact ATS Norway for more information

Year of construction: 2010, condition: used, Please provide reference number upon request: 21293 Specifications: Approx. 2010 model S70 coupling Functions as it should 645 kg 172 bar Ready for delivery Own weight: 645 Model: HS11000 = More information = Csdpfx Ahjxb N Dreysgr Please contact ATS Norway for more information

Year of construction: 1974, condition: used, Please contact J.A.J. Jansen for further information. Codpfxjyl Rhho Ahyegr

Condition: used, Please provide reference number upon request: 22136 Description: Plumett tensioner for sale on behalf of a customer.According to the owner, the machine is in working condition.Ready for delivery. = More information = Cgedpfx Asx Ty Rcjhyer Please contact ATS Norway for more information

Year of construction: 2025, condition: used, New: Yes CE mark: yes Serial number: DPX-27550 Cgjdpfxeu H Tp Do Ahyjr Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Year of construction: 2014, condition: used, New: Yes Empty weight: 6.650 kg Serial number: T8041047-010 Transport dimensions (LxWxH): 6,058x2,438x2,591 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information Cedexxn I Repfx Ahyegr

Year of construction: 2008, condition: used, Empty weight: 11.000 kg Serial number: 280736 Csdpoxxn Rrefx Ahyjgr Transport dimensions (LxWxH): 12,192x2,438x2,89 Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or Ronald van der Laar for more information

Condition: used, Restproducten te koop: Surplus items for sale: DPX-25082 - CAT AVR 365-2076 - € 1.750,- DPX-25081 - CAT 254-2267 - € 50,- DPX-25080 - CAT AVR 582-9033 - € 750,- DPX-30022 - CAT Control unit 604-9581 - € 250,- Cgedpfx Ahsw Sq Uneysr DPX-34103 - DSE 8620 MKII Controller - € 2.000,- DPX-35030 - Aisikai ASKW1-3200 Breaker 2500A - € 2.750,- DPX-00000 - CAT DE165GC Canopy - € 1.000,- DPX-25006 - DPX Remote control for generator set - €750,- DPX-25092 - FPT Iveco Air filter pn 8037883 - €165,- = More information = Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Year of construction: 2016, condition: used, Used tank Capacity:1000 Liter 2 identical units available = More information = Empty weight: 150 kg CE mark: yes Transport dimensions (LxWxH): 1,05x1,2x2,2 Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information Cgodpfxjx Am Aue Ahyor

Year of construction: 2023, condition: used, Rated current (A): 1000 Poles: 3 Cjdpfjxq Upxjx Ahyegr = More information = New: Yes Empty weight: 41 kg Serial number: P21410070W Transport dimensions (LxWxH): 3,4x2,9x4,1 Production country: JP Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information

Condition: used, Beschikbare containers: Available containers: DPX-29037 - 20FT USED 2011 silent container - €12.500,- (photo 1) DPX-29040 - 20FT NEW 2015 silent container - €15.00,- (photo 2) DPX-29046 - 20FT NEW 2015 silent container - €15.000,- (photo 3) DPX-29048 - 40FT HC NEW 2017 silent container - €18.500,- (photo 4) DPX-29049 - 40FT HC NEW 2017 silent container - €18.500,- (photo 5) DPX-29050 - 40FT HC NEW 2023 silent container - €25.000,- (photo 6) DPX-29081 - 40FT HC USED 2008 silent container - €15.000,- (photo 7) Cedpfexpcwnox Ahyegr = More information = Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Year of construction: 2017, condition: used, New: Yes Empty weight: 13.500 kg Cedpfx Aoxxn Nushysgr Serial number: T8053258-021 Transport dimensions (LxWxH): 12,192x2,438x2,592 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information

Condition: good (used), power: 86 kW (116.93 HP), fuel type: diesel, Year of construction: 2009, operating hours: 594 h, Cifa PC 607/411 D7 trailer pump serial number 13357 Auxiliary engine Deutz 6 cyl. Aspirated kw 86.5 rpm 2300 PC 607 pumping unit max. flow rate 65 mc/h Max. concrete pressure 112 bar Max. oil pressure 350 bar Rigid single-axle trailer, towing drawbar Cgsdpfovz T Hhex Ahysr 4 manual stabilizers Hydraulic water pump Automatic greasing pump Pumping hours 594 Year of construction 2009

Year of construction: 1995, condition: used, Please contact J.A.J. Jansen for further information. Cedpfxjyc Dmfs Ahyjgr

Condition: good (used), RIPPER with cylinder Cjdpfx Aheyc Nn Ieyegr

Condition: used, Gierkink GMT 050 Felling Head Maximum Gripper Opening: 122cm Maximum Cutting Diameter: 50cm Minimum Cutting Diameter: 8cm Weight of Felling Gripper: 395kg Maximum Gripping Load: 2,500kg Recommended Hydraulic Flow: 45-80 liters/minute Maximum Operating Pressure: 250 bar Saw Blade Length: 64cm Effective Saw Blade Length: 50cm Saw Motor: 10cc piston motor Cedpfx Ajyfvwuohyjgr Optional: We are happy to install the felling gripper to your carrier vehicle in our vehicle workshop—simply inquire. We are an official distribution and service partner for GMT, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete GMT product range! Subject to errors and prior sale! Rental possible = More information = New: Yes Please contact Marius Herden for further information.

Condition: used, Westtech Woodcracker CL320 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended oil flow main circuit (l/min): 70 – 150 Recommended operating pressure main circuit (bar): 280 Recommended oil flow auxiliary circuit (l/min): 45-60 Recommended operating pressure auxiliary circuit (bar): 200 Carrier vehicle operating weight (t): 12 – 20 Optional: Autospeed Optional: Collecting grapple Optional: Cylinder slewing unit: 2 x 48° Cgodpfx Ahoyfvp Rsyer Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are an official Westtech Woodcracker sales and service partner, Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products. Rental possible = Further information = New: Yes Please contact Marius Herden for further information.

Condition: used, Westtech Woodcracker C550 Available immediately Equipment: - Collection grapple - Endless rotatable tiltator - Autospeed function - Cutting diameter (softwood): 600 mm - Cutting diameter (hardwood): 550 mm - Grapple opening width: 1,600 mm - Shear opening: 900 mm - Hydraulic flow: 100–190 l/min - Hydraulic flow for auxiliary functions (e.g. rotation): 50–70 l/min - Recommended operating pressure: 280 bar - Carrier vehicle operating weight: 24–30 t - Integrated Multigrip Also available from stock with Powertiltator! Adapter plates available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We offer the complete range of Westtech Woodcracker products! Rental available = Further information = Cgsdpfxoyfu E Re Ahysr New: Yes Please contact Marius Herden for more information.

Condition: used, Westtech Woodcracker CS510 Crane Grapple saw for cardanic mounting Immediately available Cjdpfx Aoyfu Eqehyegr Features: - Cutting diameter: 540 mm - Grapple opening width: 1,270 mm - Own weight (base with full equipment): 360–400 kg - Recommended hydraulic flow: 50–110 l/min - Recommended operating pressure: 200–280 bar - Saw chain lubrication: Oil We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range! Rental possible = Further information = New: Yes Please contact Marius Herden for more information.

Year of construction: 2024, condition: used, For inquiries about the crawler, Mr. Herden will be happy to assist you by phone. Seppi M. MAX 75 HP / 75 PS / Radio-Controlled Crawler Vehicle / Recovery Winch / Seppi M. MICROFORST rc 155 Forestry Mulcher / Seppi M. H 5 rc 175 Mulcher / In stock & immediately available Price for crawler without attachments: €126,190.00 net / €150,166.10 gross Standard configuration and features: Dimensions*: - Total width with tracks retracted: 1,650 mm - Total width with tracks extended: 2,450 mm - Depth: 2,600 mm - Height: 1,250 mm - Track length: 1,570 mm - Track width: 230 mm - Lateral/longitudinal incline: 55° - Weight (without equipment): 2,200 kg Engine: - Perkins 4-cylinder diesel engine - Power: 55 kW / 75 HP - Torque: 270 Nm at 1,800 rpm - Displacement: 2,200 cc - Cooling with automatic reversible fan (automatic fan cleaning) Drive: Hydraulic system for attachments: - High-flow hydraulic circuit (closed loop) for attachments (double-acting): - Capacity: max. 93 l/min at 2,750 rpm - Pressure: 380 bar Service hydraulic system: - Low-flow hydraulic circuit for attachments (double-acting): - Capacity: max. 15 l/min at 2,750 rpm - Pressure: 200 bar Vehicle hydraulic system: - Capacity: max. 154 l/min at 2,750 rpm - Max. pressure: 400 bar Undercarriage: - HIGH GRIP: Stability and traction on inclines up to 55° under optimal conditions - Hydraulically adjustable vehicle width 800 mm (2x400 mm) - AUTO TRACK TENSION: Active automatic track tensioning - Patented track derailing protection - Stability and traction due to robust tread and large contact area of the tracks Control: - Radio remote control with graphic display (vital machine parameters and tilt indicator) - Range: 150 m - Potentiometer for speed control with variable travel speed from 0 to 100% Cedpsyfrpgjfx Ahysgr Lifting system: - FLOAT: Lifting mechanism with assisted float position (contact pressure regulation) Standard equipment: - Vehicle with rollover protection bar - LED headlights - Internal components protected by highly robust steel covers - Underguard to protect engine and hydraulics - Colour: anthracite RAL7021 | red RAL3020 OPT 573 Bio hydraulic oil OPT 221 Rear forestry protection with recovery winch. Optional: SEPPI M. MICROFORST rc 155 – Hydraulic forestry mulcher Price: €23,130.00 net / €27,524.70 gross Optional: SEPPI M. H5 rc 175 – Hydraulic mulcher Price: €13,770.00 net / €16,386.30 gross We have a large selection of various Seppi M. products in stock and immediately available! Mr. Herden (Tel.) will be happy to assist you. Upon request, we can also provide financing offers. We are an official Seppi M. distributor and service partner. We supply the complete Seppi M. product range! Errors and prior sale excepted! Rental available = More information = New: Yes Contact Marius Herden for further information.