Used Low Loader / Lowbed Trailers for sale (565)

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation ----General components: * Jost mechanical front support legs * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm at the front, on the right side of the chassis * Underrun protection, bolted * Plastic quarter fenders Ljdpfx Akox Hm Rcsksru ----Tipping platform: * Net hooks on each of the bearings of the central locking mechanism, as well as 2 on the front wall * Steel pallet-sided 3-way tipping body with adjustable Strong side panels (continuous side walls with internal tube reinforcement at the top - without center rails - can be folded down with side panel spring-assisted lifters) * Rear frame rails bolted * Combination steel wing doors - rear wall, 2-wing, asymmetrical split - can be pivoted and locked at 270° - not foldable - as well as with additional pivoting frames for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the wing door open * 4 mm sheet metal floor made of fine-grained steel ----Load securing: * 1 x 5-ton lashing eye in each corner * 4 x 3-ton lashing eyes on each side, recessed in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Rear receiving rail for the loading ramps * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment below the loading area in the chassis for the ramps, lockable from the rear ----Tires: * Tires 358/55 R 19.5 ----Painting: * Drawbar, underrun protection, rear frame, folding support legs at the rear hot-dip galvanized * Axles, springs, air tanks and support legs painted in a black tone * Painting of the side panels in a RAL color of your choice (but no special or metallic paint) - can be changed up to approx. 6 weeks before completion ----Information: * Superstructure - reinforced - with load securing certificate * Errors and prior sale subject to change * Sample images ----Delivery time: * Available for immediate delivery from week 47/2026

Condition: new, maximum load weight: 18,275 kg, overall weight: 25,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 860 mm, Equipment: ABS, MAX Low-Loader NEW? Curved loading platform | 18.3 t payload | Ramps | from €49,100 New vehicle – individually configurable according to your application. Robust low-loader trailer for the safe transport of construction machinery, vehicles and heavy equipment. Compact design with high payload and a powerful ramp system for daily use on construction sites.----Highlights ? Approx. 18,275 kg payload ? Curved loading platform with rear slope ? Hydraulic steel ramps, adjustable ? Ramp load capacity up to 40,000 kg per pair ? High-strength steel construction ? BPW axles with air suspension ? EBS braking system with spiral cable----Technical data ? Total weight: 25,000 kg ? Unladen weight: approx. 6,725 kg ? Payload: approx. 18,275 kg ? Loading platform length: 8,600 mm ? Loading height at max. load: approx. 860 mm ? Overall width: 2,540 mm ? Speed: 80 km/h ? Axle spacing: 1,360 mm----Standard equipment Lodjypa Irspfx Akksru ? Curved loading platform with hardwood floor (approx. 48 mm) ? Diamond plate covering over the axles ? Multiple lashing points up to LC 10,000 daN ? Galvanized, one-piece steel ramps with hardwood covering ? Hydraulic ramp lifting mechanism ? High-strength fine-grain steels (S355 / S690) ? BPW axles, air-suspended, drum brakes ? LED lighting ASPÖCK NORDIK ? EBS braking system (2S/2M)----Included options / accessories ? Turntable with drawbar (1,750 mm) and drawbar eye Ø 40 mm ? Electric-hydraulic unit at the rear under the loading platform ? Tire pressure monitoring system TPMS (ECE R141) ? Cover plates between ramps and loading platform ? Operating valves for ramps on the right side ? Galvanized supports under the loading platform slope ? Rotating beacon bracket at the rear ? Extendable warning signs with LED ? Tools & documentation on USB ? Additional license plate holder at the rear right----Further equipment and individual modifications are possible at any time – we configure your vehicle exactly according to your requirements. Example photo. Equipment may vary depending on configuration.

Condition: used, maximum load weight: 2,570 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 09/2026, next inspection (TÜV): 09/2028, * 6000678 - Vehicle ID for telephone inquiries * Manufacturer: Vlemmix, Type: 35VR1535 * 3,500 kg 3-axle low-loader trailer * Tare weight: 930 kg * Payload: 2,570 kg * Internal dimensions (L x W x H): 480 x 180 x 34 cm * Tires: 195/50 R 13 C * Loading height: approx. 34 cm * Steel frame, hot-dip galvanized * Perforated steel loading ramp, 132 cm * 18 x lashing points * 3 x 1,500 kg axles * The trailer is currently still registered! * Delivery possible nationwide upon request! ----Our email address: Our service for you: - Obtaining short-term or customs license plates - Transport / delivery throughout the EU - Customs clearance of vehicles to third countries Whatsapp for English, German, Russian and other languages: Ljdpfxozzuw Ds Akksru

Condition: new, maximum load weight: 33,975 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, total height: 860 mm, Equipment: ABS, MAX Low-Bed Trailer NEW – 9.3 m Loading Area | Ramps | Approx. 34 tons Payload | from €58,600 Lrjdpfoypazlex Akksu New vehicle – can be individually configured according to your area of application. Robust low-bed trailer with a curved loading area and a powerful ramp system for the professional transport of construction machinery, vehicles, and heavy equipment. Designed for high payload, long service life, and safe use on construction sites. Highlights: * Approx. 33,975 kg payload * Curved loading area with rear slope * Hydraulic, adjustable steel ramps * Ramp load up to 40,000 kg per pair * Drawbar version with turntable * High-strength steel construction * BPW axles with air suspension * EBS braking system Technical data: * Gross weight: 42,000 kg * Unladen weight approx.: 8,025 kg (±3%) * Payload approx.: 33,975 kg * Loading area length: 9,300 mm * Overall width: 2,540 mm * Loading height at max. load: approx. 860 mm * Axle track: 1,360 mm * Speed: 80 km/h Standard equipment: * Curved loading area with approx. 48 mm hardwood floor * Diamond plate covering over the axles * Several lashing points up to LC 10,000 daN * Galvanized, one-piece steel ramps (approx. 3,000 × 800 mm) * Hydraulic ramp lifting system * High-strength fine-grain steels S355 / S690 * BPW axles, air-suspended, drum brakes * EBS braking system (2S/2M) with spiral cable * LED lighting ASPÖCK NORDIK Included options / equipment: * Turntable with approx. 1,750 mm long drawbar and tow hitch Ø 50 mm * Coupling height loaded approx. 630–810 mm * Electro-hydraulic unit at the rear under the loading area * Tire pressure monitoring system TPMS (ECE R141) * Cover plates between ramps and loading area * Control valves for ramps on the right side * Galvanized supports under the loading area slope * Rotating beacon bracket at the rear * Extendable warning signs with LED * Reflective tape according to EU regulations * Additional license plate holder at the rear right Further equipment and individual modifications are possible at any time – we configure your vehicle exactly according to your requirements. Example photo. Equipment may vary depending on the configuration.

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3.000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1.100 ¤, hydraulic 1-piece ramps 500 ¤, Also with 8.10 m loading area length + widening in stock , , , , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Lodpfj Aa Ra Njx Akksru

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading area length 9,000 mm, loading height approx. 900 mm, 20 x lashing eyes each 10 t, 16 x stake pockets in the outer frame, drive-on ramps (approx. 3,000 x 750 mm), drive-on ramps laterally adjustable, spring lifter for 1-piece ramps, wooden floor 70 mm thick, storage box with lid for lashing chains or tension belts, contour marking according to regulations, spring-loaded parking brake, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting, rotating beacon = price: ¤ 800, widening to 3 m = price: ¤ 100 hydraul. Surcharge for:, warning signs with lighting and rotating beacon = price: 800 ¤, widening to 3 m = price: 1,100 ¤, hydraulic 1-piece ramps 500 ¤, also with 8.10 m loading area length + widening in stock, , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lsdpfo Aa N Ufjx Akksru

Condition: used, maximum load weight: 17,500 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 03/1995, loading space length: 8,200 mm, loading space width: 2,500 mm, total length: 11,000 mm, total width: 2,550 mm, Total weight: 24,000 kg / 30,000 kg Lrsdpfxjzwbuho Akkeu Unladen weight: 6,500 kg Payload: 17,500 kg / 23,500 kg Loading length: Total approx. 8,200 mm / approx. 6,000 mm low-bed, including rear extension Loading height: 900 mm Further information: - Storage box with recess - Twin tires - Ramps - Tool box - Large lashing kit - 3 m widening - Warning signs

Condition: used, empty load weight: 3,440 kg, maximum load weight: 10,560 kg, overall weight: 14,000 kg, axle configuration: 2 axles, first registration: 08/2011, next inspection (TÜV): 08/2027, loading space length: 6,500 mm, suspension: steel, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 800 mm, twin tires, lashing eyes. -- Subject to printing errors, errors and changes, sample images --. More data available at: !, More details: ! Lrjdsz Td Injpfx Akkju

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Lodpfx Akoz Td H Dokeru

Condition: used, empty load weight: 3,530 kg, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65R17,5 129/127J, color: other, gearing type: other, front tire size: 205/65R17,5 129/127J, rear tire size: 205/65R17,5 129/127J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Like new, twin tires, lashing eyes. -- Subject to printing errors, mistakes and modifications, sample images --. More data available at: !, More details: ! Lodpfxoz Td N Se Akkjru

Condition: used, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 04/2009, total length: 9,495 mm, total width: 2,550 mm, total height: 960 mm, Equipment: ABS, Vehicle identification number: W09PJ300980M49180 Meusburger MPJ-3 - First registration: 04/03/2009 DE, technical inspection due Lrsdez Ew D Ejpfx Akkeu BPW Eco axles with drum brakes Adjustable trailer drawbar - eyelet 40 mm - coupling height approx. 350 mm PLATFORM BODY WITH WHEEL ARCHES - with mounting rails for aluminum ramps, WITHOUT RAMPS!!! Platform length: 2,850 + 5,000 mm, width: 2,550 mm Loading height in the lowered position: 870 mm Central lubrication system Toolbox Tires: 235/75 R 17.5 Changes, prior sale and errors expressly reserved. The description serves for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: new, maximum load weight: 16,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, * T3 Profile 30.0 ----Brakes: * EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking bolt ----Electrical system / Lighting: * SmartBoard as an information tool on the trailer with pressure sensors for pressure indication for total axle load display per axle group * 15-pole power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Side marker lights with turn signal control * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) ----General components: * Side impact protection * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of closed plastic and rear straight, galvanized steel splash guards, each with splash protection * Folding cover (hot-dip galvanized) for the tool box in the turntable platform * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder coated) on the right side ----Low-loader platform: * 4 lashing points on each side, with simultaneous 2-ton lashing capability * Rubber covering on the folding ramps as well as on the approach ramp on the left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from the front to the end beam * Hardwood flooring on the running surfaces of the low-loader platform * Log holder under the loading area in the longitudinal direction * Roller stop in front of the front beam, raised, with 1 x 6.4-ton lashing point on each side ----Load securing package (consisting of): * 5 pairs of UVV lashing rings, pivoting and lowering, loadable in all directions and recessed in the outer frame - 13.4 tons in the corners, otherwise 10 tons. * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) ----Ramps: * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding valves Lodpfx Aketplv Njksru * Hydraulic lateral ramp movement ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump output in the truck of over 40 liters to a maximum of 140 liters / min.) * Hydraulic control block, splash-proof * Two-line hydraulic system ----Rear support: * Rear support hydraulically (single-stage cylinder) ----Loading area dimensions: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach ramp) * Loading height when loaded approx. 890 mm +/- 20 mm air suspension ----Painting: * Chassis, turntable, roller stop, folding extensions & access ramps hot-dip galvanized. * Axles, turntable, drawbar, air tank etc. painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 30,010 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 10,000 mm, loading space width: 2,520 mm, loading space height: 900 mm, total width: 2,550 mm, Brand-new Fliegl 4-axle low-bed trailer with wheel recesses and split ramps, type VTS 400 RM Hire-purchase offer: 48-month term, down payment only the VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-bed trailer First registration: New vehicle Gross weight: 24,000kg/40,000kg Unladen weight: 9,990kg Payload: 14,010kg / 30,010kg Overall length: 12,000mm Loading length: total approx. 10,000mm, gooseneck approx. 2,850mm, load bed including rear taper approx. 7,150mm Width: 2,550mm Loading height: 900mm Further information Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear spray flap Half-shell mudguards 1st and 2nd axle with anti-spray mud flaps behind each axle, anti-spray mud flap behind the 4th axle Excavator arm trough above rear axles, from the rear axle to the rear approx. 1,800mm long, approx. 650mm wide and 150mm deep 2 pairs of lashing holes, each 5t, in the excavator arm trough, on the longitudinal frame approx. 300mm from the front and approx. 200mm before the rear taper Spare wheel bracket for 1 spare wheel, upright on the gooseneck, front center, spare wheel brand same as main equipment, steel rim Toolbox let into the floor on the gooseneck with lid, W=720mm / L=520mm / D=170mm 1st pair of wheel recesses after the gooseneck, let into the deep deck in the driving lane, chamfered for access, length at the bottom approx. 1,600mm, approx. 400mm deep. Note! Frame in the main beam area 400mm higher than the wheel recess. 2nd pair of wheel recesses between the axles, let into the deep deck in the driving lane, chamfered for access, length at the bottom approx. 600mm, approx. 300mm deep. Note! Frame in the main beam area 300mm higher than the wheel recess. Extensions retractable to 3,000mm (no extension at the rear taper and not in the wheel recesses below) (track width of machines or vehicles to be transported must not exceed the outer frame width of 2,550mm) Storage compartment for timber planks underneath the low-bed deck 70mm timber planks for extension to 3,000mm Ledpfx Astrizkekkjru Lashing points – low-bed trailer 1 pair of RIN lashing rings inlaid at the front on the gooseneck, each 5t 4 pairs of lashing holes in the outer frame, each 5t (for securing strap attachments) 8 pairs of lashing mushrooms flush-mounted top and side in the outer frame, each 10t 2 at the front on the gooseneck 6 in the deep deck First lashing ring 250mm from the front, last a maximum of 250mm from the rear, spacing between lashing rings not more than 1,100mm 5 pairs of stake pockets inlaid in the outer frame, inner dimensions 70 x 40mm (convertible to 5t ring lashing eyes, not included) 1 pair of foldable lashing rings additionally inlaid in the floor, each 10t 1 inside next to main frame at start of low-bed section 2 pairs of additional foldable lashing rings, each 10t 1 on the gooseneck (protrudes) 1 behind the last axle inlaid in the floor Towing device for turntable trailer Drawbar with certified 50mm towing eye, towing eye inclined by 8° D-value at least 160kN Axles and Suspension BPW drum braked axles "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5" Manufacturer’s choice, with M + S marking Steel rims in twin arrangement,

Condition: used, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 08/2019, loading space length: 3,090 mm, loading space width: 1,800 mm, loading space height: 1,800 mm, loading space volume: 10 m³, * 20560 - Vehicle ID for telephone inquiries * 3-ton tandem trailer, construction machinery trailer * Type: UBA 3030-14-1800 * Ball hitch Lsdpey Sdv Tsfx Akkjru * Inertia braking system * Adjustable ramps * Galvanized * Storage boxes * Tarpaulin superstructure * FIXED PRICE!! ----Our email address:     Our service for you:       - Obtaining short-term or customs registration plates       - Transport / delivery throughout the EU       - Customs clearance of vehicles to third countries Whatsapp for English, German, Russian and other languages:

Condition: used, maximum load weight: 31,700 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2022, loading space length: 7,920 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 11,940 mm, total width: 2,520 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 8,300 kg Payload: 15,700 kg / 31,700 kg Overall length: 11,940 mm Loading length: approximately 7,920 mm overall Width: 2,520 mm Loading height: 900 mm Additional information: - Galvanized - Parabolic suspension - Hydraulic ramps, steel, with wooden covering, side-shiftable - Storage box with recess - Large lashing kit - Warning signs at the front and rear - Plastic tool box - Foldable rear support - Excavator arm recess starting above the rear axles and extending to the rear, approximately 1,800 mm x 650 mm, approximately 150 mm deep - 3 m widening Lsdpfx Ajz Am U Djkkjru - Storage compartment with wooden planks under the loading platform

Condition: used, empty load weight: 2,640 kg, maximum load weight: 7,360 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 11/2015, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 235/75 R17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R17,5, rear tire size: 235/75 R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 400 mm sideboards, lashing eyes, surcharge for ramps: 1,000 €, printing errors, errors and changes excepted, sample images, more data at: !, More Details: ! Lodpfx Akez Td Sgokeru

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 to BPW Eco axles ----Suspension: * Air suspension with raising and lowering function, controlled by an RtR valve ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking mechanism ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General components: * Lateral underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle: closed plastic fenders, rear axle: straight, galvanized steel mudguards, each with splash protection * Reflective contour strips on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform ----Low-bed platform: * 4 lashing points on each side with simultaneous 2 to lashing capacity * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards stored in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the sides ----Load securing (La-Si package): * 2 lashing points (6.4 to) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and embedded in the outer frame - in the corners 13.4 to, otherwise 10 to. ----Excavator arm rest: * Over the rear axle up to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4 to lashing rings on the sides in the excavator arm rest) ----Loading area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading height: * Unloaded approx. 1,070 mm * Loaded approx. 910 mm ----Tires: Ljdpfsl Tq Euex Akkjru * 235/75 R 17.5 ----Paint finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available for immediate delivery from Egestorf, near the A7 motorway

Condition: new, empty load weight: 250 kg, maximum load weight: 1,250 kg, overall weight: 1,500 kg, loading space length: 3,010 mm, loading space width: 1,260 mm, loading space height: 300 mm, tire size: 145/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT1500 301x126. The standard equipment of the Anssems box trailer with brake includes aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. Lredeq Slqtjpfx Akkou We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: used, empty load weight: 8,200 kg, maximum load weight: 30,000 kg, first registration: 08/2009, tire size: 215/75/17,5, Year of construction: 2009, Internal No. 0002 Viewing strictly by prior appointment only - MOT valid until 12/27 - 40 km/h approval - 80 km/h possible - New air reservoir - New air bellows - New shock absorbers Suspension: • 1st axle: Air suspension • 2nd axle: Air suspension • 3rd axle: Air suspension • 4th axle: Air suspension Brakes: • 1st axle: Drum brakes • 2nd axle: Drum brakes • 3rd axle: Drum brakes with spring-actuated parking brake • 4th axle: Drum brakes with spring-actuated parking brake Tyres: • 1st axle: Twin tyres • 2nd axle: Twin tyres • 3rd axle: Twin tyres • 4th axle: Twin tyres • Tyre size: 215/75/17.5 • Tread depth: 50% • Rim type: Steel Additional equipment: • Unladen weight: 8,180 kg • Payload: 21,820 kg • Loading area: 20.53 m² • Loading volume: 61.58 m³ • ABS • EBS • Lifting roof • Number of axles: 4 • Axle manufacturer: BPW • Spare wheel holder including spare wheel • Hydraulic loading ramps Internal cargo space dimensions (approx.): • Length: 8,050 mm • Width: 2,550 mm • Height: 3,000 mm Sale subject to prior sale, errors, and omissions excepted. Lredeyy Th Ujpfx Akkeu

Condition: new, maximum load weight: 31,100 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 10,410 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Total weight: 24,000kg/40,000kg Empty weight: 8,900kg Payload: 15,100kg/31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm offset, 7,920mm loading bed including rear bevel Width: 2,520mm Loading height: 900mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/net Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear splash guards across the entire width (not in conjunction with forklift bracket) Half-shell mudguards 1st + 2nd axle with anti-spray splash guards behind each axle, Anti-spray flaps in front of and behind the 3rd and 4th axle Excavator arm recess above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons. in the excavator arm recess on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear bevel 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in the floor on a crank with lid, W=720 mm/ L=520 mm / D= 170 mm Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width 2,550 mm) Storage compartment for wooden planks below the low-loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts in the longitudinal beam at the front on a crank, 10 tons each. 4 pairs of lashing holes in the outer frame, each with 5 tons (tension belt attachment) 9 pairs of lashing mushrooms, embedded in the outer frame at the top and sides, each with 10 tons 2 x at the front on the bend 7 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 3 additional pairs of folding lashing eyes, each with 10 tons 1 x on the bend (sticks out) 1 x at the beginning of the low bed, embedded inside on the longitudinal beams 1 x embedded in the floor behind the last axle Towbar with tested 50 mm towing eye Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free Steel-rubber bearings and mechanical axle load compensation at the front and rear (rocker compensation) Wheels and tires 235 / 75 R 17.5" Ljdpfx Aerducpokkeru at the manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the towing vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 12-24 volts, multi-chamber LED lights, yellow LED lighting on the side, license plate lighting in LED, (Note! Incorrect diagnoses can occur with certain towing vehicles, although the function is present) 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear in LED 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm drop sides, steel drop sides, hot-dip galvanized, lateral with central stanchion, pluggable, chassis: hot-dip galvanized, wooden floor, 16 lashing eyes in the outer frame, rear slanted, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood! Loading height: 880 mm, , Also available in loading area length 6.70 m Immediately available, , Rental price from 580 Euro, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Lredpfx Ao Aawb Tjkkju

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm side walls, steel side walls HOT-DIP GALVANIZED, with central stake on the side, plug-in, chassis: hot-dip galvanized, wooden floor, 14 lashing eyes in the outer frame, bevelled at the rear, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood!, Loading height: 880 mm, , Also available in loading area length 7.20 m, available for immediate delivery., , Rental price from 580 euros, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Lrsdpfs Aawcwjx Akksu

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm drop sides, steel drop sides, hot-dip galvanized, lateral with central stanchion, pluggable, chassis: hot-dip galvanized, wooden floor, 16 lashing eyes in the outer frame, rear slanted, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood! Loading height: 880 mm, , Also available in loading area length 6.70 m Immediately available, , Rental price from 580 Euro, , -- Misprints, errors and changes excepted, Sample pictures --, More data under: !, More Details: ! Lrode Aawgvspfx Akkeu

Condition: used, empty load weight: 2,680 kg, maximum load weight: 6,320 kg, overall weight: 9,000 kg, axle configuration: 2 axles, first registration: 06/2008, next inspection (TÜV): 05/2027, loading space length: 5,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Tie-down points, height of the lashing eye approximately 880 mm, -- subject to printing errors, mistakes and modifications, sample images --, more data can be found at: !, More Details: ! Lrjdpfj Aduy Uex Akkeu

Condition: used, empty load weight: 5,560 kg, maximum load weight: 24,440 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 07/2019, loading space length: 10,500 mm, suspension: air, tire size: 235/75 R17,5, color: other, gearing type: other, front tire size: 235/75 R17,5, rear tire size: 235/75 R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 10,500 mm, sold on behalf of, , --  Misprints, errors and changes reserved, sample images --, more details at: !, More Details: ! Lredpfx As Adpgijkksu