Lowbed

Humbaur Humbaur 13 to Tandem Tieflader 6,2m Pritsche & ALU-BW HBT 136224 BS

Condition: new, overall weight: 1,900 kg, maximum load weight: 14,500 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: full air, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS --- INCLUDING SAF air suspension with lifting/lowering valve INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable Fpelekn N Siohcdw Eoh * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 11,900 kg, empty load weight: 2,500 kg, maximum load weight: 9,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-over with ramp shaft, Typ. HBT 106224 BE (planks can be pushed in) INCLUDING side walls made of aluminium, anodized INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,400 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,140 x 2,550 x 1,400 mm * Aluminium drop sides, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Lockable mounting shaft for optional aluminum ramps in the chassis frame * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear Felhcdskn N R New Esph * BPW axles * 6 pcs. 6 t lashing rings countersunk * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Lockable pick-up shaft * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,200 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp * Approx. 13° drive-on angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function Felhcdwjkn N Rws Eeph * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 11,900 kg, maximum load weight: 9,100 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 400 mm, Year of construction: 2025, total width: 2,550 mm, total height: 3,260 mm, Equipment: ABS, Humbaur HBT 106224 BS Heavy-Duty Low-Load Trailer Tandem High-Load Trailer Standing Planks New Vehicle Overall dimensions in mm: 8400 x 2550 x 3260 Interior dimensions in mm: 6200 x 2450 x 400 Loading height: 920 mm Total weight: 11900 kg Unladen weight: 2800 kg Payload: 9100 kg Tires in inches: 235/75 R 17.5 Ramps in mm: 2600 x 540 Rotating beacon on the ramp, optional Reverse light, optional 2x tool boxes CHASSIS: ? Axles from renowned manufacturers ? Maintenance-free parabolic suspension with load compensation ? Tires of the manufacturer's choice ? Tire Pressure Monitoring System (TPMS) including Auto Locate BRAKING SYSTEM: EBS braking system according to ECE guidelines 2 interchangeable coupling heads red/yellow ISO 1728 Spring-loaded parking brake ELECTRICS: 24-volt lighting system with LED multi-chamber taillights and flashing LED side marker lights 15-pin connector for lighting TOWING DEVICE: Galvanized towbar with 40 mm diameter screw tow eye Coupling height continuously adjustable via crank CHASSIS FRAME: Solid, welded chassis frame, hot-dip galvanized Sloped rear loading area Floor covering made of 40 mm softwood planks, painted/impregnated BODY: Anodized aluminum side walls, 400 mm high, foldable to the side and removable ? Galvanized corner stanchions, pluggable at the front and rear LOAD SECURING: ? 7 pairs of 2-ton lashing points in the outer frame ? 3 pairs of 6-ton lashing points recessed into the deck floor SUPPORTING: ? Reinforced 12-ton geared landing gear with load and high-speed gear ? 2 telescopic folding supports on the left and right at the rear of the vehicle RAMPS: ? 2 foldable, one-piece steel ramps, galvanized, laterally adjustable ? Ramp jacks (1 gas spring per ramp) ? Ramp securing devices on the rear stanchions ? Ramps with grating EQUIPMENT: ? Galvanized steel fenders with anti-spray system ? Side impact protection up to the first axle, foldable ? Contour markings on the sides and rear ? 2 wheel chocks with holder, space for a two-line license plate ATTENTION !!!!! PLEASE READ !!!!! We expressly reserve the right to sell this item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and inspection to ensure that the buyer is not under any misconception regarding its condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome! Images are similar, may contain accessories for an additional charge. The stated interior dimensions are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 Fpjlswfmgbjhcdw Eoh 58285 Gevelsberg Tel.: Fax:

Condition: new, overall weight: 21,000 kg, empty load weight: 4,600 kg, maximum load weight: 166,400 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, loading space height: 3,710 mm, suspension: air/air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- --- HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: Fpjlhcdwjkcuyzo Esh * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 11,900 kg, maximum load weight: 9,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-through (wheels outside), Typ. HS 105020 BS --- INCLUDING galvanized grating on the access ramps at the rear --- HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,500 kg * Loading area approx. 5,000 x 2,010 mm * Loading height unloaded approx. 700 mm * Overall dimensions: LxWxH approx. 7,160 x 2,550 x 3,000 mm * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,400 x 540 mm) with one gas strut lift per ramp * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 850 mm * Reinforced 12 t geared support winch with load and fast gear Fpelhcekn N S Hsdw Ejh * 4 6 t lashing rings (recessed in the corners) * 12 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Low loading and installation height * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp surface * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload TOP! On request, we are happy to offer you a visible paint finish (front, side walls, mudguards and rear cross member) on the galvanized chassis in your corporate color, see example pictures. ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: used, overall weight: 13,600 kg, empty load weight: 3,570 kg, maximum load weight: 10,030 kg, axle configuration: 2 axles, loading space length: 6,300 mm, loading space width: 2,470 mm, first registration: 10/2017, next inspection (TÜV): 10/2025, suspension: other, tire size: 205/65R17,5 ---/124J, color: other, gearing type: other, front tire size: 205/65R17,5 ---/124J, rear tire size: 205/65R17,5 ---/124J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, 10 x lashing eyes, , --  Subject to printing errors, mistakes and changes, Sample images --, More information at: !, More details: ! Fpslewq D E Ejhcdw Ejh

Condition: new, overall weight: 19,000 kg, maximum load weight: 14,600 kg, axle configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: air/air, tire size: 385/65 r22,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19.0 to tandem three-way tipper with Hardox body, Typ. HTK 195024 Gravel tipper PLUS --- INCLUDING HARDOX side walls, rear wall and rear floor, 900 mm high INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES tipper body and superstructure KTL and powder-coated in color of choice Fpolhokn N S Rjcdw Ejh INCLUSIVE with automatic tailgate release INCLUSIVE SAF air suspension and drum brake INCLUSIVE dropside jack in FR left Equipment: * Permissible gross weight 19,000 kg * Payload approx. 14,600 kg * Loading area approx. 5,010 x 2,420 mm * Unloaded loading height approx. 1520 mm * Overall dimensions: LxWxH approx. 7,150 x 2,550 x 2,550 mm * Bridge floor made of 4 mm highly wear-resistant steel, HB 450; * HARDOX superstructure 900x3 mm, swinging side walls with central locking system * Left-hand side wall spring jack in direction of travel * HARDOX rear wall mounted on pendulum bearings, with automatic tailgate release; * Drawbar for coupling heights unbel. approx. 820 - 970 mm * Galvanized drawbar, screwed in, with DIN screw drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Lateral / rear tipping angle: 50 ° / 50 ° * Tipping bridge and superstructure KTL and powder-coated in color of choice * HOT-DIP GALVANIZED CHASSIS & DRAWBAR * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); three-stage telescopic cylinder, 1st stage Oxinite-coated, 2nd + 3rd stage salt-bath nitrided, with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection * 2 pairs of semi-circular mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 385/65 R22.5 tires * SAF air suspension with drum brake axles, electronically controlled for tilt stabilization * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 * Fixed underride guard Your advantages: * Optimum corrosion protection for the chassis/ drawbar thanks to hot-dip galvanizing in an immersion bath * Low tare weight => therefore high payload * Tipper body and superstructure KTL and powder-coated in the color of your choice * HARDOX superstructure for maximum load capacity --- Optional * Roll-up tarpaulin and platform --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 20,000 kg, empty load weight: 4,590 kg, maximum load weight: 15,410 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,540 mm, loading space height: 400 mm, suspension: air, tire size: 235/75R17,5, Equipment: ABS, | Humbaur HBTZ217224 BS tandem low loader 20t version | height-adjustable drawbar with crank 800-1070 mm | solid welded chassis frame, hot-dip galvanized, | 2 hydraulic solid steel ramps can be moved sideways | dimensions loading area: L: 7.20m W: 2.54m Height BW: 0.40m | vehicle rear sloping with rear support | 6 pairs of heavy-duty lashing eyes recessed in the floor | lashing rings in the outer frame, | SAF axle with drum brake | total weight: 20.000 kg, payload:15.360kg | tires: 235/75R17,5 twin tires | operating voltage 24V | floor covering made of 50mm softwood floor | towing eye 50mm diameter | lashing rings in the outer frame, | errors excepted, subject to change and prior sale. Fpolhcdwewkqw Us Eoh

Condition: new, overall weight: 2,500 kg, empty load weight: 700 kg, maximum load weight: 1,900 kg, axle configuration: 2 axles, loading space volume: 10.7 m³, loading space length: 3,280 mm, loading space width: 1,770 mm, loading space height: 1,800 mm, color: silver, construction height: 2,390 mm, working width: 2,295 mm, Manufacturer: Humbaur Type: Box trailer Poly-Alu low loader HK 263217 Zul. Total weight: 2600 kg, wheels on the side Payload: 1900 kg Empty weight: 700 kg Box dimensions: 3280 x 1770 x 1800 mm Tires: 195 50 R13C Loading height: 520 mm - Longitudinal beam chassis hot-dip galvanized - Aerodynamic poly bow and poly hood in black metallic - Construction made of double-walled, anodized aluminum profiles - Door on the front right side with three-point locking, lockable - Interior lighting - 13-pin plug and reversing light - Base plate 18 mm thick with airline rails right and left - Aluminum ramp wall at the rear (1000 kg load capacity) with gas spring support, - lockable - 6 lashing rings for airline rails, length-adjustable on the floor for load securing - Fully automatic support wheel with maneuvering handle - Sliding supports right and left Price including vehicle registration document (registration certificate part II and COC papers) We have a large Number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun If you wish, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Additional accessories on request. Technical changes, price changes and errors reserved. No liability is accepted for errors and misprints. Automatic reversing, rubber spring axle, independent wheel suspension, case, fully automatic support wheel with maneuvering handle, marker lights, hot-dip galvanized longitudinal beam chassis, braked, including guarantee, aerodynamic poly bow and poly hood in black metallic, construction made of double-walled, anodized aluminum profiles, door on the front right side with three-point locking, lockable, interior lighting, 13-pin plug and reversing light, base plate 18 mm thick with airline rails right and left, aluminum ramp wall at the rear (1000 kg load capacity) with gas spring support, 6 lashing rings for airline rails, length-adjustable on the floor for load securing, sliding supports right and left Fpjlhcerazm Esdw Esh