Lowbed

Fliegl SDS 470 T Standard

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2025, 3-axle MULTIMAX *PLUS semi-trailer low loader, air-suspended and hydraulically forced steered axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Total weight: 49500 kg 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin turning radius to the rear approx.: 2,100 mm Fifth wheel height when loaded approx.: 1,205 mm Loading area length approx.: 9,600 mm Extendable by approx.: * Loading area width approx.: 2,540 mm Loading height with max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle distance: 1,360 mm *Total weight depends on the fifth wheel load: Yes Special permit required if the country-specific legislation is exceeded: Technical description Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,900 mm, with a bevel at the rear approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading area: Loading area, length approx. 9,600 mm with a bevel at the rear approx. 900 mm x 6°. Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps with a length of approx. 4920 mm and a width of approx. 900 mm. Open grating surface. Ramp tips that can be opened hydraulically. Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load and ramp angle according to technical data sheet: C470319 Maximum incline angle with lowered loading area: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF twin tires. Make of our choice Load index 143/141J (144/144F) Brake system: WABCO EBS-E brake system in accordance with EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Version in accordance with EU regulations. (ASS 3) Metallization Complete HRM metallization (High Resistance Metallization) Complete steel construction shot blasted, then hot-finished with ZINACOR 850 (zinc 85% - aluminum 15%). Paint 6-K final treatment: Complete steel construction shot blasted after welding. 1 layer of zinc-based base paint, 1 layer of adhesion primer. Final painting with 2 layers of 2-component paint (acrylic) in a single color in RAL colors of your choice, then sealing the cavities with special wax. Rims in silver. Multi-color and special painting for an additional charge. Steel construction: Steel construction made of high-strength fine-grain steel. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welder tested according to DIN-EN 287-1. MAG welding process according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 iFront wall made of steel, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM, attached at the height of the Phjdpfeizu Ntjx Ahzoa outer frame profile. i ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets 24N connection in accordance with ISO-1185 24S connection in accordance with ISO-3731 15-pin connection in accordance with ISO-12098 If your pin assignment differs from the ISO connection standard, please let us know. i "Anderson"

Condition: new, machine/vehicle number: 56c59c8aba35227ffb44c9f75, empty load weight: 11,350 kg, maximum load weight: 26,650 kg, overall weight: 38,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Chassis Jumbo semi-trailer Welded steel construction with narrow cross member spacing and reinforced design, low loader external frame profile, for transporting construction machinery up to 32000 kg and up to a max. external width of the construction machinery of 2550 mm, fifth wheel plate with replaceable 2 king pins. Rear inclination to approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/checker plate, In the low bed Omega rail on the side at the bottom of the outer frame as a suspension strip for tarpaulin and spacer for the lashing points, not in the wheel area. With lift table on an additional fixed lightweight outer frame with omega profile, lift table can then be raised with closed tarpaulin! 24 t. 2-speed support winch, single-side operation, with semicircular lower section and straight connecting plate, with thrust compensation, free swing radius to the rear approx. 1950 mm, Folding rear support 2 wheel chocks with holder Aluminum side bumpers Quarter-shell mudguards in front of and behind each axle With anti-spray flaps behind each axle Steel underride guard Rear spray flaps across the entire width 4 stainless steel storage box, w=800/h=350/t=350 mm, with polished door, lockable 2 x in FR-left and 2 x in FR-right in front of the 1st axle Lifting table to gooseneck, approx. 3000 mm long, can be raised hydraulically for transfer to gooseneck, with mechanical locking when raised. (inclined cylinder for good ground clearance, Fliegl standard). Operation in FR-right + additional operation with radio remote control (same as ramp operation) Lifting table can be raised with closed tarpaulin! Tarpaulin suspension in the lift table area on an additional fixed lightweight outer frame with Omega profile, lift table can be raised with closed tarpaulin! Lashing mushrooms can also be used when lowered! Lashing eyes Gooseneck: 4 pairs of 5 to lashing eyes embedded in the outer frame 2 pairs of lashing points at the top and sides of the outer frameLow bed 8 pairs of lashing mushrooms at the top and sides of the outer frame, each 10 tons 9 pairs of 5to embedded in the outer frame Axles+suspension SAF drum brake axles last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Pedpfji Riw Aox Ahzoha Air suspension with lift & lower valve + auto-reset function H & S function with quick air release 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle lift below the recomm. Driving height, therefore no warranty for tire damage Wheels and tires 235 / 75 R 17,5 from leading manufacturers Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection in the truck via EBS, without truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front, in LED 2 white/red lane departure lights at the rear, 1 rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illum

Condition: new, empty load weight: 10,900 kg, maximum load weight: 37,100 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 9,600 mm, loading space width: 2,540 mm, loading space height: 890 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, operation weight: 10,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm, with a bevel at the rear of approx. 1,000 mm x 6° -Technical fifth wheel load: 18,000 kg -For tractor units: 4 x 2 and 6 x 2 Loading area: -Loading area, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6° -Loading area can be raised and lowered hydraulically after the gooseneck, length approx. 3,000 mm, load capacity up to approx. 9,000 kg -Grating and sheet metal floor approx. 5 mm as additional reinforcement on the bevel of the loading area Ramps: -A pair of two-part AXS steel ramps with a length of approx. 4,675 mm and a width of approx. 900 mm -Grating floor -Hydraulically hinged ramp tips -Ramps can be moved hydraulically by approx. 235 mm outwards and approx. 365 mm inwards -Painted sand coating on the outer frame of the ramp and on the ramp tip -Flashlights on the outside of the ramp tips with switch next to the ramp controls -Ramp secured in driving position using a quick release Axles, suspension and tires: -BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle with self-steering -1st Axle with traction aid -Operation via the brake pedal in the tractor unit -Technical axle load: 12,000 kg -Air suspension with lifting and lowering valve -235/75 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 -TPMS tire pressure monitoring sensors mounted in all wheels including spare wheels Phsdpfx Ajuadk Nohzsa Braking system: -WABCO EBS-E brand braking system in accordance with EU regulations Paintwork: -Semi-trailer MB 7350 Nova gray Accessories included: -Bulkhead made of steel, plug-in, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -JOST module B - static test load = 50,000 kg -Continuous grating with 5 mm sheet metal underlay as additional reinforcement -Painted sand coating -Cutouts in the outer frame of the loading area and the lifting bed for hanging control valves for the hydraulic ramps on the right of the vehicle -2" kingpin -Central lubrication system with 1 pump, brand BEKAMAX -On the gooseneck 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized -Electric cable winch, approx. 5,400 kg pulling force, with radio remote control -Wire cable approx. 24 m long, cable ø approx. 9.5 mm, including cable pressure roller -WABCO Smart Board System -4 extendable warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Condition: used, mileage: 415,025 km, power: 331 kW (450.03 HP), first registration: 04/2019, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2027, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: air conditioning, Internal vehicle number: G300181 German vehicle Available immediately at our premises in Kaufungen - Kassel For more information, contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Unladen weight: 7,335 kg With tipping hydraulics Air-suspended leaf spring Automatic with Opticruise clutch 4x2 450 HP Financing example: * Internal number: G300181 * Purchase price: €42,900.00 * Down payment: 10% * Term: 60 months Pedpew Itw Rofx Ahzsha * Monthly installment: €671.57 * Final residual value: €8,180.00 If you are interested in this offer or wish to adjust it according to your requirements, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----

Condition: good (used), mileage: 273,639 km, power: 302 kW (410.61 HP), first registration: 06/2019, fuel type: diesel, tire size: 385/65 22.5, axle configuration: 8x4, wheelbase: 4,350 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, total length: 9,100 mm, total width: 2,550 mm, total height: 3,400 mm, loading space length: 5,630 mm, loading space width: 2,430 mm, loading space height: 1,600 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, differential lock, electric window regulation, = Additional Options and Accessories = - AP axles - Euro 6 - Rear air suspension - Center armrest - Radio - Sun visor - Power take-off (PTO) = Notes = - Rear tipper (Type SCA 03 01), 17m³ - Tipper body (internal) dimensions: length 563 cm x width 243 cm x height 160 cm - 9-ton front axles - 13-ton rear axles - Opticruise, 3 pedals = Further Information = Pjdpfexl Ad Hjx Ahzeha General Information Number of doors: 2 Registration number: 97-BVJ-2 Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Axle Configuration Front axle 1: Tire size: 385/65 22.5; Max. axle load: 9,000 kg; Steered; Left tire tread: 60%; Right tire tread: 60%; Suspension: leaf springs Front axle 2: Tire size: 385/65 22.5; Max. axle load: 9,000 kg; Steered; Left tire tread: 70%; Right tire tread: 70%; Suspension: leaf springs Rear axle 1: Tire size: 315/80 22.5; Dual tires; Differential lock; Max. axle load: 13,000 kg; Left inside tire tread: 60%; Left outside tire tread: 60%; Right inside tire tread: 60%; Right outside tire tread: 60%; Reduction: outboard planetary axles; Suspension: air suspension Rear axle 2: Tire size: 315/80 22.5; Dual tires; Differential lock; Max. axle load: 13,000 kg; Left inside tire tread: 70%; Left outside tire tread: 70%; Right inside tire tread: 70%; Right outside tire tread: 70%; Reduction: outboard planetary axles; Suspension: air suspension Weights Unladen weight: 15,280 kg Payload: 21,720 kg Gross vehicle weight (GVW): 37,000 kg Functionality Tipper: Rear Condition Technical condition: good Visual condition: good Product Safety Manufacturer: Clean Mat Trucks B.V. Wageningsestraat 17 6673DB ANDELST, NL