Lowbed construction machinery

Humbaur HS 115020 BS / SMB / Baumaschinentransporter

Condition: new, overall weight: 6,500 kg, empty load weight: 1,600 kg, maximum load weight: 4,900 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 330 mm, first registration: 01/2023, suspension: other, tire size: 215/75 r17,5 zoll, wheelbase: 850 mm, Year of construction: 2023, Equipment: ABS, HUMBAUR construction machinery tandem low loader HS 654020 BS INCLUDING ALUMINIUM ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: -Permissible total weight 6,500 kg -Payload approx. 4,900 kg -Loading area approx. 4,000 x 2,000 mm -ALUMINIUM loading ramps -Drawbar permanently mounted -Automatic support wheel -4 3 t lashing rings (in the corners) -10 2 t lashing points recessed in the outer frame -2-circuit compressed air ABS brake system -Sheet steel mudguards -bridge floor made from softwood planks Hot-dip galvanized chassis frame -215/75 R17.5 tires Your advantages: Gjlhcdohmm Ryow Ejbl -Low loading and overall height -Optimal corrosion protection thanks to hot-dip galvanizing in an immersion bath -Safe loading and unloading thanks to supports on the loading ramps -Simple and easy handling of the aluminum ramps -Ideal load securing options thanks to standard lashing options -The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles -Low tare weight => therefore high payload => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers!

Condition: new, overall weight: 6,500 kg, empty load weight: 1,700 kg, maximum load weight: 4,800 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,000 mm, loading space height: 330 mm, first registration: 01/2023, suspension: other, tire size: 215/75 r17,5 zoll, wheelbase: 850 mm, Year of construction: 2023, HUMBAUR construction machinery tandem low loader HS 654520 BS INCLUDING ALUMINIUM ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: -Permissible total weight 6,500 kg -Payload approx. 4,800 kg -Loading area approx. 4,500 x 2,000 mm -ALUMINIUM loading ramps -Drawbar continuously height-adjustable -Automatic support wheel -6 3 t lashing rings (in the corners) -10 2 t lashing points recessed in the outer frame -2 adjustable support feet on the drive-on ramps -2-circuit compressed air ABS brake system -Sheet steel mudguards -bridge floor made from softwood planks Hot-dip galvanized chassis frame -215/75 R17.5 tires Your advantages: -Low loading and overall height Gbjlhcshmm Rrodw Esl -Optimal corrosion protection thanks to hot-dip galvanizing in an immersion bath -Safe loading and unloading thanks to supports on the loading ramps -Simple and easy handling of the aluminum ramps -Ideal load securing options thanks to standard lashing options -The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles -Low tare weight => therefore high payload => Freight costs for delivery: 2.90 euros plus VAT per km => Prices are from D-86368 - Gersthofen Your direct contact: Mr. Hirn Tel. DOLL FAHRZEUGBAU *Subject to prior sale and changes! *Price valid from D-86368 - Gersthofen* *Sales only to commercial customers!

Condition: new, overall weight: 5,000 kg, empty load weight: 1,500 kg, maximum load weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 330 mm, suspension: other, tire size: 215, wheelbase: 850 mm, Year of construction: 2023, Equipment: ABS, HUMBAUR construction machinery tandem low loader HS 654020 BS INCLUDING ALUMINIUM ramps at the rear HOT-DIP GALVANIZED CHASSIS FRAME Equipment: -Permissible total weight 6,500 kg -Payload approx. 4,900 kg -Loading area approx. 4,000 x 2,000 mm -ALUMINIUM loading ramps Height-adjustable drawbar -Automatic support wheel -4 3 t lashing rings (in the corners) -10 2 t lashing points recessed in the outer frame -2-circuit compressed air ABS brake system -Sheet steel mudguards -bridge floor made from softwood planks Hot-dip galvanized chassis frame -215/75 R17.5 tires Gbelhcshmm Rvedw Eol Your advantages: -Low loading and overall height -Optimal corrosion protection thanks to hot-dip galvanizing in an immersion bath -Safe loading and unloading thanks to supports on the loading ramps -Simple and easy handling of the aluminum ramps -Ideal load securing options thanks to standard lashing options -The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles -Low tare weight => therefore high payload

Condition: used, overall weight: 6,500 kg, maximum load weight: 4,930 kg, axle configuration: 2 axles, first registration: 03/2022, total width: 2,545 mm, total height: 2,850 mm, Subject to errors and prior sale! Internal number: 1458. GW251082359 ----For equipment and condition, see pictures. ----The vehicle is unfinished! Nationwide delivery is available for an additional charge. Gbjlhcdwewh Et Ee Esl Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing is also available without a down payment! Do you have any questions? We'd be happy to advise you!

Condition: used, Year of construction: 2023, Humbaur tandem low loader in standard equipment Technical data: Inner dimensions: approx. 5,000 mm x 2,010 mm x 250 mm Overall dimensions: approx. 7,160 mm x 2,550 mm x 3,200 mm Max. Total weight: 10,500 kg Payload: approx. 8,050 kg Wheelbase: 990 mm Tires: 235/75 R 17.5 inches Loading height: approx. 700 mm Drawbar length: approx. 1,800 mm Coupling height: approx. 700-950 mm Drive-on angle: approx. 15° Plane length: approx. 2,600 mm Plane width: approx. 540 mm 2 pairs of lashing rings, 3,000 kg per lashing point Lashing rings recessed in the bridge floor 6 pairs of lashing rings, 1,000 kg per lashing point Lashing rings in the outer frame Standard equipment: Axles Axles from well-known manufacturers; Suspension: Maintenance-free parabolic suspension with load compensation; Tires: Tires of the manufacturer's choice on steel rims; Braking system: ABS braking system in accordance with ECE guidelines, with ALB function; ABS plug connection ISO 7638; Spindle parking brake; 2 interchangeable coupling heads red/yellow ISO 1728; Towing device: Towing tube with DIN screw towing eye Ø 40 mm, galvanized, continuously adjustable via crank; Electrics: 24 volt lighting system with multi-chamber rear lights and LED side marker lights; 15-pin connector plug for lighting; Frame: Solid, welded chassis frame, hot-dip galvanized; Low construction, loading area straight between the wheels; Fixed, hot-dip galvanized front and side walls; Corner stakes can be plugged in at the rear; Floor: Floor covering made of 40mm softwood flooring; Support: Reinforced 12 t geared support winch Gslhcdwotqgk Te Eebl with load and fast gear; 2 x support on the frame, foldable and telescopic; Ramp covering made of galvanized grating; Ramp jack 1 gas pressure spring per ramp; Ramp lock on rear stanchion; Equipment Galvanized steel fender with anti-spray mats; Side impact protection rigidly attached, from the start of the bridge to the 1st axle; Contour marking on the side and rear; 2 wheel chocks with holder; Space for two-line license plate;

Condition: new, overall weight: 3,500 kg, empty load weight: 700 kg, maximum load weight: 2,800 kg, axle configuration: 2 axles, loading space volume: 1.1 m³, loading space length: 3,500 mm, loading space width: 1,640 mm, loading space height: 210 mm, color: other, construction height: 1,960 mm, working width: 2,150 mm, Manufacturer: Humbaur Type: Construction machinery transporter HS 353718 Zul. Total weight: 3500 kg Payload: 2800 kg Empty weight: 700 kg Box dimensions: 3500 x 1640 x 210 mm Tires: 13 inches Loading height: 450 mm - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Professional cast overrun device with extra low handbrake lever - 13-pin plug and reversing light - Aluminum ramps (1510 x 370 mm) standing, with anti-slip coating and integrated support feet - Incl. 6 x welded lashing points - Extra stable support wheel fully automatic - Walkable aluminum checker plate fender Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, you will receive a free Transfer license plate. We repair trailers from all manufacturers. Additional accessories on request. Technical changes, price changes and errors reserved. No liability is accepted for errors and misprints. Automatic reversing, rubber spring axle, independent wheel suspension, aluminum ramps (1510 x 370 mm) standing, extra stable support wheel fully automatic, marker lights, hot-dip galvanized, braked, including guarantee, welded side wall/frame construction made of sheet steel, professional cast overrun device with extra low handbrake lever, 13-pin plug and reversing light, with anti-slip coating and integrated support feet, including 6 x welded lashing points, walkable aluminum checker plate fenders Gsloh Uh Nujhcdw Ejbl

Condition: new, overall weight: 3,000 kg, maximum load weight: 2,270 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,600 mm, loading space height: 485 mm, Year of construction: 2025, total width: 2,200 mm, total height: 2,020 mm, * Humbaur HS 303016 construction machinery transporter * New vehicle * Construction machinery transport trailer * Transport trailer * Weight730 kg * Total weight3,000 kg * Payload2,270 kg * Total dimensions:4,960 mm x 2,200 mm x 2,020 mm * Internal dimensions3000 mm x 1,600 mm x 485 mm * Tires14 inches * Welded side wall/frame construction made of sheet steel Gbjlhcdwjvvgkcj Esl * Screwed V-drawbar, hot-dip galvanized * 13-pin plug and reversing light * Hot-dip galvanized steel ramps (1530 x 360 mm) standing, * Load capacity per ramp 1500 kg, with anti-slip mesh covering and integrated support feet * Lashing rings mounted in the outer frame 12 pieces (6 pairs) ,Tensile force 1000 kg per lashing ring * Fully automatic support wheel * Walkable steel fenders that close with the side walls * VAT can be shown ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The data provided is approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg , Am Sinnerhoop 17 Opening times: Monday ? Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, overall weight: 3,000 kg, maximum load weight: 2,340 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,600 mm, loading space height: 270 mm, total width: 2,200 mm, total height: 2,015 mm, HUMBAUR HS 30 30 16 - 3000 kg Machine transporter Technical data: Weight: 660 kg Total weight: 3,000 kg Payload: 2,340 kg Inner length: 3,000 mm - Total length: 4.0 mm Inner width: 1,600 mm Total width: 2,200 mm Inner height: 270 mm - Total height: 2,015 mm Loading height: 485 mm Tires: 14 inches Drawbar length approx. 1,530 mm Coupling height approx. 440 mm Plane length approx. 1,530 mm Plane width approx. 360 mm Standard equipment: Welded side wall/frame construction made of sheet steel, hot-dip galvanized Screwed V-drawbar, dip bath hot-dip galvanized 13-pin plug and reversing light Hot-dip galvanized steel ramps (1530 x 360mm) standing, load capacity per ramp 1500 kg, with anti-slip mesh covering and integrated support feet Lashing rings mounted in the outer frame 12 pieces (6 pairs) for 3000 mm and 14 pieces (7 pairs) for 3750 mm box length, pulling force 1000 kg per lashing ring Fully automatic support wheel Solid walkable steel fenders Other sizes, designs and equipment on request. PLEASE CALL US - we will be happy to advise you! NEW PRODUCT - Incl. invoice with VAT, 3 years TÜV and 2 years guarantee. The vehicle registration document can be sent after a deposit (550.00 euros) or payment in advance so that you can register the trailer for collection. Some of the pictures do not correspond to the basic equipment If desired, the handover can also take place in 06618 Wethau, Klein Wethau (Gmach company) near Leipzig. Tel., Fax for an additional charge of 200.00 euros. IMPORTANT! - If you would like to pick up in Wethau near Leipzig, please call us beforehand to check availability! Opening times: Monday - Friday 8.00 a.m. - 12.00 p.m. and 1.00 p.m. - 5.00 p.m. Saturday 9.00 a.m. - 1.00 p.m. Gbelhcdor Nnnmjw Ejl Outside of these times, you can also send your enquiries at any time by fax:

Condition: new, overall weight: 11,900 kg, maximum load weight: 9,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-through (wheels outside), Typ. HS 105020 BS --- INCLUDING galvanized grating on the access ramps at the rear --- HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,500 kg * Loading area approx. 5,000 x 2,010 mm * Loading height unloaded approx. 700 mm * Overall dimensions: LxWxH approx. 7,160 x 2,550 x 3,000 mm * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,400 x 540 mm) with one gas strut lift per ramp * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 850 mm * Reinforced 12 t geared support winch with load and fast gear * 4 6 t lashing rings (recessed in the corners) * 12 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt Golhekn N S Hscdw Eobl * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Low loading and installation height * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp surface * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload TOP! On request, we are happy to offer you a visible paint finish (front, side walls, mudguards and rear cross member) on the galvanized chassis in your corporate color, see example pictures. ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, Functionality: fully functional, overall weight: 11,900 kg, empty load weight: 2,550 kg, maximum load weight: 9,350 kg, operation weight: 1,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 350 mm, tire size: 235/75 R17,5, ground clearance: 700 mm, color: orange, Year of construction: 2023, machine/vehicle number: 1136622, Equipment: tail-lift, trailer coupling, Double axle truck trailer for transporting machinery Humbaur brand Model HS 105020 BS Golhcetwat Dodw Esbl RAL orange 2011 Trailer with soft wooden slatted floor, treated for strength and durability Outer wheels, with lowered floor - loading angle approximately 16° Pair of 540 mm gridded rear loading ramps, adjustable in width and can be fixed to the flatbed With galvanized 40 mm diameter eyelet 15-pin plug With toolbox mounted on the front External dimensions 7150x2550x3250 mm Internal dimensions 5000x2010x350 mm Docking height 765 - 965 mm Height of loading platform 700 mm Equipped with: - 2 pairs of load retaining rings recessed in the cargo bed, traction force 3000 kg each - 6 pairs of load securing rings recessed in the outer frame, traction force 1000 kg each - Pair of telescopic supports fixed on the frame, foldable In prompt delivery Viale Italia, 171 Conegliano (TV) - Berton

Condition: new, overall weight: 2,500 kg, empty load weight: 660 kg, maximum load weight: 1,840 kg, axle configuration: 2 axles, loading space volume: 1.4 m³, loading space length: 3,000 mm, loading space width: 1,600 mm, loading space height: 270 mm, color: other, construction height: 2,015 mm, working width: 2,200 mm, Manufacturer: Humbaur Type: Construction machinery transporter HS 253016 Perm. weight: 2500 kg Weight: 2500 kg Payload: 1840 kg Unladen weight: 660 kg Box dimensions: 3000 x 1600 x 270 mm Tires: 14 inch Loading height: 480 mm - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Bolted V-drawbar, hot-dip galvanized - 13-pin plug and reversing light - Hot-dip galvanized steel ramps (1530 x 360 mm) upright, Load capacity 1500 kg per ramp, with anti-slip grid covering and integrated support feet - Lashing rings mounted in the outer frame 12 pieces (6 pairs), tensile force 1000 kg per lashing ring - Fully automatic support wheel - Walk-on steel mudguards that are flush with the drop sides Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is accepted for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, hot-dip galvanized steel ramps (1530 x 360mm) upright, jockey wheel, marker lights, hot-dip galvanized, braked, incl. guarantee, welded side wall, welded side wall, welded side wall, welded side wall, welded side wall. Guarantee, Welded side wall/frame construction made of sheet steel, Bolted V-drawbar, 13-pin plug and reversing light, Load capacity 1500 kg per ramp, With anti-slip grid covering and integrated support feet, Lashing rings mounted in the outer frame 12 pieces (6 pairs), Tensile force 1000 kg per lashing ring, Walk-on steel mudguards that are flush with the side walls. Gbjlhcdwjr Eim Dj Esl

Condition: new, overall weight: 3,500 kg, maximum load weight: 2,770 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 1,600 mm, loading space height: 270 mm, Year of construction: 2025, Humbaur HS 353016 Construction machinery transporter New vehicle Construction machinery transport trailer Transport trailer Model: 2025 Weight 730 kg Total weight 3,500 kg Payload 2,2770 kg Total dimensions: 4,960 mm x 2,200 mm x 2,020 mm Internal dimensions 3,000 mm x 1,600 mm x 485 mm Tires 14 inches Welded side wall/frame construction made of sheet steel Screwed V-drawbar, hot-dip galvanized 13-pin plug and reversing light Gelettfngohcdw Esbl Hot-dip galvanized steel ramps (1,530 x 360 mm) standing, Load capacity per ramp 1,500 kg, with anti-slip mesh covering and integrated support feet Lashing rings mounted in the outer frame 12 pieces (6 pairs) ,Tensile force 1000 kg per lashing ring Fully automatic support wheel Walkable steel fenders that close with the side walls VAT can be shown ATTENTION !!!!! READ THIS ITEM !!!!! We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! The data provided are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday ? Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, Functionality: fully functional, overall weight: 11,900 kg, empty load weight: 2,550 kg, maximum load weight: 9,350 kg, operation weight: 1,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 350 mm, tire size: 235/75 R17,5, ground clearance: 700 mm, color: orange, Year of construction: 2023, machine/vehicle number: 1157628, Equipment: tail-lift, trailer coupling, Double-axle truck trailer for transporting machinery Humbaur brand Model HS 105020 BS RAL orange 2011 Trailer with soft wooden slatted floor, treated for strength and durability Exterior wheels, with lowered floor - loading angle approximately 16° Pair of 540 mm gridded rear loading ramps, adjustable in width and can be fixed to the flatbed With galvanized 40 mm diameter eyelet 15-pin plug External dimensions 7150x2550x3250 mm Internal dimensions 5000x2010x350 mm Docking height 765 - 965 mm Height of loading platform 700 mm Equipped with: - 2 pairs of load retaining rings recessed in the cargo bed, traction force 3000 kg each - 6 pairs of load securing rings recessed in the outer frame, traction force 1000 kg each - Pair of telescopic supports fixed on the frame, foldable - With gas lift pistons Geletwaqvohcdw Esbl In prompt delivery Viale Italia, 171 Conegliano (TV) - Berton

Condition: new, overall weight: 3,000 kg, empty load weight: 820 kg, maximum load weight: 2,280 kg, axle configuration: 2 axles, loading space volume: 2.2 m³, loading space length: 3,750 mm, loading space width: 1,850 mm, loading space height: 270 mm, color: other, construction height: 2,015 mm, working width: 2,453 mm, Manufacturer: Humbaur Type: Construction machinery transporter HS 303718 Zul. Total weight: 3000 kg Payload: 2280 kg Empty weight: 720 kg Box dimensions: 3750 x 1850 x 270 mm Tires: 14 inches Loading height: 480 mm - Welded side wall/frame construction made of sheet steel, hot-dip galvanized - Bolted V-drawbar, hot-dip galvanized - 13-pin plug and reversing light - Hot-dip galvanized steel ramps (1530 x 360mm) standing, load capacity per ramp 1500 kg, with anti-slip mesh covering and integrated support feet - Lashing rings mounted in the outer frame 12 pieces (6 pairs), pulling force 1000 kg per lashing ring - Fully automatic support wheel - Walkable steel fenders that close with the side walls Price includes vehicle registration document (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun If you wish, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Additional accessories on request. Technical changes, price changes and errors reserved. No liability is accepted for errors and misprints. Automatic reversing, rubber spring axle, independent wheel suspension, hot-dip galvanized steel loading ramps (1530 x 360mm) standing, support wheel, marker lights, hot-dip galvanized, braked, includes guarantee, welded side wall/frame construction made of sheet steel, bolted V-drawbar, 13-pin plug and reversing light, load capacity per ramp 1500 kg, with anti-slip mesh covering and integrated support feet, lashing rings mounted in the outer frame 12 pieces (6 pairs), pulling force 1000 kg per lashing ring, walkable steel fenders that are flush with the side walls. Gslhcdjvyc Ixjw Eobl

Condition: used, overall weight: 3,500 kg, maximum load weight: 2,680 kg, axle configuration: 2 axles, loading space length: 3,750 mm, loading space width: 1,850 mm, loading space height: 270 mm, first registration: 04/2022, next inspection (TÜV): 04/2026, Year of construction: 2022, total width: 2,453 mm, total height: 2,020 mm, Humbaur HS 353718 * Construction machinery transport trailer * Transport trailer * Aluminum floor * 100 km/h approval * Year of manufacture: 2022 * EZ: 05.04.2022 * HU: 05-2026 * Weight: 820kg * Total weight: 3500kg * Payload: 2680kg * Overall dimensions: 5730mm x 2453mm x 2020mm * Internal dimensions: 3750mm x 1850mm x 270mm * Tires: 14 inches * Welded side wall/frame construction * Bolted V-drawbar, hot-dip galvanized * 13-pin plug and reversing light * Hot-dip galvanized steel ramps Golhcdwjvm R S Se Eobl * Ramp 1500 with anti-slip Grid covering and integrated support feet * Lashing rings mounted in the outer frame 12 pieces (6 pairs), tensile force 1000 kg per lashing ring * Fully automatic support wheel * Walkable steel fenders that close with the side walls The VAT is deductible. ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to delivery, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, overall weight: 6,500 kg, maximum load weight: 4,900 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,540 mm, loading space height: 2,860 mm, Year of construction: 2025, total width: 2,540 mm, total height: 2,860 mm, Equipment: ABS, Humbaur HS 654020 BS * Construction machine transporter * NEW 2025 * Bolted construction machinery tandem low loader * HOT-DIP GALVANIZED * Permissible total weight: 6500 kg * Empty weight: 1600 * Payload: approx. 4900 kg * Loading area: approx. 4000 x 2000 mm * External dimensions: approx. 6200mm x 2540 mm x 2860mm * Loading ramps with expanded metal covering, hot-dip galvanized * Loading angle 15° * Drawbar continuously height-adjustable * Automatic support wheel Gbjlhcotnatwsdw Esl * 2 wheel chocks * 2 pairs of 3 t lashing rings (in the corners) * 5 pairs of recessed lashing brackets in the outer frame * 2 support feet on the ramps * 2-circuit compressed air ABS brake system * Sheet steel fender * Bracket for the electrical and compressed air connections on the drawbar * Bridge floor made of softwood planks * Chassis frame including structure hot-dip galvanized * Tires 215/75 R17.5 * Drawbar continuously height-adjustable (different coupling heights) * Low loading or construction height * Safe loading and unloading * Non-slip profiled ramp covering * Low dead weight and therefore high payload ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. We strongly recommend a viewing and inspection so that the buyer does not have any false ideas about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8.30 a.m. to 5 p.m., Saturday 8.30 a.m. to 2 p.m. Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, overall weight: 13,600 kg, empty load weight: 3,570 kg, maximum load weight: 10,030 kg, axle configuration: 2 axles, loading space length: 6,300 mm, loading space width: 2,470 mm, first registration: 10/2017, next inspection (TÜV): 10/2025, suspension: other, tire size: 205/65R17,5 ---/124J, color: other, gearing type: other, front tire size: 205/65R17,5 ---/124J, rear tire size: 205/65R17,5 ---/124J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, 10 x lashing eyes, , --  Subject to printing errors, mistakes and changes, Sample images --, More information at: !, More details: ! Gbslhcowhk Stodw Esl

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,200 kg, axle configuration: 2 axles, loading space length: 7,250 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,200 kg * Loading area approx. 7,250 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp * Approx. 13° drive-on angle * Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm * DIN screw-type drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing Gbjlhcdskn N Rwow Eol * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, overall weight: 11,900 kg, maximum load weight: 9,100 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,450 mm, loading space height: 400 mm, Year of construction: 2025, total width: 2,550 mm, total height: 3,260 mm, Equipment: ABS, Humbaur HBT 106224 BS Heavy-Duty Low-Load Trailer Tandem High-Load Trailer Standing Planks New Vehicle Overall dimensions in mm: 8400 x 2550 x 3260 Interior dimensions in mm: 6200 x 2450 x 400 Loading height: 920 mm Total weight: 11900 kg Unladen weight: 2800 kg Payload: 9100 kg Tires in inches: 235/75 R 17.5 Ramps in mm: 2600 x 540 Rotating beacon on the ramp, optional Reverse light, optional 2x tool boxes CHASSIS: Gelhcdswfmgbjw Eobl ? Axles from renowned manufacturers ? Maintenance-free parabolic suspension with load compensation ? Tires of the manufacturer's choice ? Tire Pressure Monitoring System (TPMS) including Auto Locate BRAKING SYSTEM: EBS braking system according to ECE guidelines 2 interchangeable coupling heads red/yellow ISO 1728 Spring-loaded parking brake ELECTRICS: 24-volt lighting system with LED multi-chamber taillights and flashing LED side marker lights 15-pin connector for lighting TOWING DEVICE: Galvanized towbar with 40 mm diameter screw tow eye Coupling height continuously adjustable via crank CHASSIS FRAME: Solid, welded chassis frame, hot-dip galvanized Sloped rear loading area Floor covering made of 40 mm softwood planks, painted/impregnated BODY: Anodized aluminum side walls, 400 mm high, foldable to the side and removable ? Galvanized corner stanchions, pluggable at the front and rear LOAD SECURING: ? 7 pairs of 2-ton lashing points in the outer frame ? 3 pairs of 6-ton lashing points recessed into the deck floor SUPPORTING: ? Reinforced 12-ton geared landing gear with load and high-speed gear ? 2 telescopic folding supports on the left and right at the rear of the vehicle RAMPS: ? 2 foldable, one-piece steel ramps, galvanized, laterally adjustable ? Ramp jacks (1 gas spring per ramp) ? Ramp securing devices on the rear stanchions ? Ramps with grating EQUIPMENT: ? Galvanized steel fenders with anti-spray system ? Side impact protection up to the first axle, foldable ? Contour markings on the sides and rear ? 2 wheel chocks with holder, space for a two-line license plate ATTENTION !!!!! PLEASE READ !!!!! We expressly reserve the right to sell this item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and inspection to ensure that the buyer is not under any misconception regarding its condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome! Images are similar, may contain accessories for an additional charge. The stated interior dimensions are approximate. For new vehicles, additional costs for vehicle documents and freight may apply. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Showroom: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, overall weight: 3,500 kg, maximum load weight: 2,870 kg, axle configuration: 2 axles, loading space volume: 2 m³, loading space length: 3,750 mm, loading space width: 1,850 mm, loading space height: 280 mm, first registration: 08/2021, next inspection (TÜV): 08/2025, total width: 2,100 mm, total height: 2,020 mm, Welded side wall/frame construction made of hot-dip galvanized sheet steel, excavator bucket storage mounted on the V-drawbar, solid walkable steel fenders, loading ramps (LxW) 1530x360 mm, load capacity per ramp 1500 kg, with anti-slip grid covering and integrated support feet, screen-printed floor, 6 x lashing eyes per side, AL-KO axle(s), support wheel at the front, overrun brake, handbrake, 13-pin trailer socket, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us! Gjljwbxzpehcdw Esbl

Condition: new, overall weight: 7,500 kg, maximum load weight: 5,600 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,000 mm, loading space height: 330 mm, Year of construction: 2024, Equipment: ABS, * Drum brakes * Ramps spring-supported & can be moved sideways * Frame completely hot-dip galvanized * 18 lashing rings recessed in the bridge floor * Loading height approx. 630 mm * Height-adjustable tow arm * Trailer available immediately * Suspension: leaf * Payload: 5,600 kg * Tires: 215/75R17.5 Gslomw U Abjhcdw Esbl ----Information non-binding - errors not excluded - sale reserved

Condition: new, overall weight: 21,000 kg, empty load weight: 4,600 kg, maximum load weight: 166,400 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,540 mm, loading space height: 3,710 mm, suspension: air/air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 216524 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle --- --- HOT-DIP GALVANIZED CHASSIS/TRACTION TUBE Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 6,500 x 2,540 mm * Loading height unloaded approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk Gbslekcuyzjhcdw Eol * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-ply) * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: used, overall weight: 3,500 kg, maximum load weight: 2,870 kg, axle configuration: 2 axles, loading space volume: 2 m³, loading space length: 3,750 mm, loading space width: 1,850 mm, loading space height: 280 mm, first registration: 08/2021, next inspection (TÜV): 08/2025, total width: 2,100 mm, total height: 2,020 mm, Welded side wall/frame construction made of hot-dip galvanized sheet steel, excavator bucket storage mounted on the V-drawbar, solid walkable steel fenders, loading ramps (LxW) 1530x360 mm, load capacity per ramp 1500 kg, with anti-slip grid covering and integrated support feet, screen-printed floor, 6 x lashing eyes per side, AL-KO axle(s), support wheel at the front, overrun brake, handbrake, 13-pin trailer socket, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Gbelhev Hvw Tecdw Ejl Please contact us!

Condition: new, overall weight: 13,000 kg, empty load weight: 2,800 kg, maximum load weight: 10,200 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 3,260 mm, tire size: 245/70 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 13.0 to tandem low-loader drive-over with rear bevel and folding steel ramps, Typ. HBT 136224 BS INCLUDING galvanized grating on the rear ramps INCLUDING aluminium drop sides, anodized HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 13,000 kg * Payload approx. 10,200 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,350 x 2,550 x 3,260 mm * 400 mm high side walls made of aluminium, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear Gjlhjkn N R Tecdw Eobl * Loading area slanted at the rear * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,600 x 540 mm) with one gas strut jack per ramp * Infinitely height-adjustable drawbar for coupling heights unbel. approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 6 6 t lashing rings recessed * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * Tires 245/70 R17.5 * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp covering * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,540 mm, suspension: full air, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS --- --- INCLUSIVE SAF air suspension with raise/lower function INCLUSIVE central axle lift on 1st axle INCLUSIVE galvanized 400 mm high solid steel bulkhead INCLUSIVE protected rear lights recessed in the end beam INCLUSIVE reinforced drawbar height adjustment by means of a spindle HOT-DIP GALVANIZED CHASSIS/DRAWBAR Equipment: * Permissible total weight 21,000 kg * Payload approx. 16,400 kg * Loading area approx. 7,200 x 2,540 mm * Unloaded loading height approx. 870 mm due to wheel wells * Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm * Galvanized 400 mm high solid steel bulkhead * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) * Spring jack as standard (hydraulic ramp jack at extra cost) * Approx. 13° drive-on angle * Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm * DIN screw-type towing eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Climbing rails welded to the drive-on slope * 8 10 t lashing rings countersunk * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection; * Spring-loaded parking brake * Steel mudguards, hot-dip galvanized * Floor and ramps with softwood planks * Chassis frame with towing tube hot-dip galvanized * 235/75 R17.5 tires (8-wheel) Geljkn N Sxohcdw Eobl * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope * Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works