Tipper semitrailer

Schmitz SKI 18 SL 7.2, Stahlmulde ca. 22m³

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable platform: Platform with hardwood planks with a rear slope of approx. 1,000 mm x 8° 1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single-color in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Bjdpfxek Eammo Adwslp Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt Sockets 24N, 24S & 15-pole Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with raising/lowering function The trailing lift axles with electro-magnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 435/50 R 19.5 Included accessories: Yellow-red air couplings on the galvanized connecting strip at the front 4 pieces of chocks with holder 2" kingpin A galvanized steel front bulkhead approx. 1600 mm high. EN12642-XL White reflector tape according to EU regulations on the side, on the extension and red at the rear Platform with strong hardwood floor 9 pairs of socket pockets for plug-in profiles 100 x 50 mm in the outer frame of the platform 1 spare wheel holder under the platform on the right in the direction of travel Galvanized folding supports under the slope of the platform Adjustable mounting rails for ALU loading ramps at the rear of the vehicle European reflector signs (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer One bracket for a rotating beacon at the rear of the semi-trailer On the gooseneck and on the rear plate, left and right, one bracket each for the warning signs including socket One tool box HDPE 620x360x610 under the platform on the left in the direction of travel 4 pairs of WADER container pockets in the platform, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of socket pocket strips, mounted transversely in the platform, for plug-in profiles 100 x 50 mm Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading condition Speed stickers 80 km/h at the rear and on both sides Four warning signs approx. 423 x 423 mm that can be extended by approx. 400 mm with an LED position light. The warning signs have a bracket for a rotating beacon Load manometer for determining the axle loads including load diagram HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallized