Walking floor semitrailer

KRAKER CF-200, 92m³, 8mm Boden, Cramaro, Luft-Lift, SAF

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Predpefi Nmwefx Ahkjc Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, functionality: unexamined, empty load weight: 8,100 kg, maximum load weight: 24,500 kg, Year of construction: 2009, The moving floor trailer is designed for the flexible transport of a wide variety of goods. Bulk materials such as wood chips, waste, or sawdust can be easily transported and unloaded using the standard moving floor system. It is also suitable for handling palletized goods and general cargo. Additionally, the trailer is equipped with an integrated blowing system. Material is conveyed to the center of the vehicle via a screw conveyor and then dosed into the airstream using a rotary valve. This allows, for example, wood pellets to be blown into storage rooms or animal feed to be conveyed into silos. Other free-flowing bulk materials can also be blown in reliably and in a controlled manner using this system. The moving floor was replaced in 2001. No blower on the trailer Predpeybbq Sjfx Ahksc Payload approx. 24 t Volume 90 m3 Tropper Wood pellets Blowing Pumping

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Pjdpfxofi Nmpe Ahksrc Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: used, overall weight: 44,000 kg, axle configuration: 3 axles, first registration: 04/2020, Year of construction: 2020, Equipment: ABS, 12172 FLATBED SEMI-TRAILER WOOD SCHWARZMÜLLER 3-axle Y series / STAKE SEMI-TRAILER LONG / SHORT Manufacturer: SCHWARZMÜLLER First registration: 04/2020 Psdpfx Ahow Higmokjrc Dimensions: 13,150 x 2,550 x 2,800 mm Gross vehicle weight: 44,000 kg Unladen weight: 5,820 kg Payload: 32,480 kg Fifth wheel load: 12,000 kg Air suspension Air suspension lift/lowering function Disc brakes Spare wheel holder Axle manufacturer: SAF HD 430 mm Lifting axle Chassis paint: RAL 7021 black grey Tyres: 6 Tread depth: 15/15/16/16/12/12 mm Rear axle tyres: 385/65 R 22.5 Ideal for long timber, short timber, or sawn timber Lightweight frame made from high-strength NAXTRA special steels Steel chequer plate cover between the frame beams above the running gear and at the front Grapple protection plates on the frame beams Reinforced steel profile front wall, approx. 2,500 mm high with central support 2 x steel box-section cross supports, chamfered on both sides 8 ECCO STEEL 9 t stakes Suitable for sawn timber transport Stakes mounted via welded clamp fittings = repositionable Each stake on left and right with one lashing bracket for strap hooks Aluminium air tanks / standard approval for 40,000 kg gross weight Approval up to 44,000 kg gross weight with permit All information without guarantee, subject to prior sale! If you have any questions regarding this or other vehicles, please call us. If you have any questions about this or another trailer/car, please call us.

Condition: used, empty load weight: 8,200 kg, maximum load weight: 26,800 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 04/2023, loading space length: 13,460 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, loading space volume: 82 m³, total length: 13,460 mm, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: grey, Year of construction: 2023, operating hours: 87,097 h, mileage: 87,097 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 40978 Reisch, sliding floor trailer * Year of manufacture: 2023 * ABS, Anti-lock Braking System * Alloy wheels * Air suspension * Lift axle * Tarpaulin, neutral color * Used tarpaulin * Portal door * Air connection, coupling head (red + yellow) * Connection plug, 2x7-pin * Connection plug, 15-pin * Lifting and lowering device * Storage box / toolbox * Platform * Roller shutter tarpaulin * Suspension: Air * Total weight: 35,000 kg * Tare weight: 8,200 kg * Payload: 26,800 kg * Permissible total weight: 35,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 60% - 60% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 60% - 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% - 60% - Tire size: 385/65 R22.5 Pedpfx Aoyv Upxshkorc * Tire sizes: 385/65 R22.5 * Interior dimensions: L=13460 mm, W=2450 mm, H=2500 mm * Internal volume*: 82 m² * Pallet spaces: 33 * Wabco SmartBoard * Mileage: 87,097 km * Remote control * Tire pressure monitoring * Cargo-Floor CF 500mm * 7mm thick XD Extra Duty * Saddle height 1150mm * Full-LED lighting * Color 7012 Basalt Grey * Upon request, we will send you a video * Construction details and further images Disclaimer: Subject to changes, prior sale, and errors. You can find more images and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.