Three-sided tipper truck

VOLVO FMX 420 6x6 Kipper KRAN 21m WINDE FUNK Bordmatik

Condition: used, mileage: 169,000 km, power: 315 kW (428.28 HP), first registration: 04/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 5,000 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Int. No.: 219 Very well-maintained VOLVO FMX 420 6x6 with a powerful HIAB crane * VOLVO * FMX * 6x6 ALL-WHEEL DRIVE * Differential locks * Leaf spring/air suspension * Permissible total weight 26,000 kg (technically 35,000 kg) * Three-way tipper, designed as a rock tipper, made of Hardox * Side loading system (Bordmatik) on the left * CRANE HIAB 232-E5 HiPRO * REMOTE CONTROL for CRANE * 5x hydraulic extensions + 1x manual * 2x fully hydraulic outriggers * Hook height approx. 21 m * Lateral reach, see load chart * WINCH * Central locking * 2-seater * Radio * AIR CONDITIONING * Very good condition Fsdpjz Nugyofx Afdegh * First owner * VAT can be shown!!! Trade-in possible Financing from 4.99% Subject to errors and prior sale! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. The listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Steel floor with anti-slip surface -Including rail for aluminum ramps -2" – Kingpin -Mechanically operated BPW landing gear -550 mm long, 8’ bevel at the end of the gooseneck -Front bulkhead incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted vertically on the front of the gooseneck -3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck -Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized) -Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left -Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right Loading platform, single telescoping: -Closed outer frame with cutouts for lashing straps (LC 1,500 daN) -Fixed section at the front 700 mm -Sheet metal floor with anti-slip surface -Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses -Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -Supports for widening to 3,000 mm -Beveled vehicle rear 8°, 550 mm long -Sled design for easy installation and removal of ramps Fgjdpfx Aoi Ai E Rsfdoh -Continuous mudflap at the rear -1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform -6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform -1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform -1 pair of rail pocket strips approx. in the center of the loading platform -1 pair of rail pocket strips on the fixed section -1 pair of rail pocket strips behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wood deck larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (dismantling system) Chassis: -Axle manufacturer BPW ECO Max -2 ride heights -4 axles á 10 t (technically 12 t) -Twin tires 245/70 R17.5 -2 x fixed axle and 2 x friction-steered axle -Reverse steering lock of the friction-steered axle via reverse gear -Brake system manufacturer Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible) Accessories: -4 chocks with holder -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm -Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included -Plug-in partition sheet at the end of the excavator recess -Electro-hydraulic unit for ramp operation -Ramp operation via wireless remote control -Hydraulic support legs at the rear of the vehicle for support during the loading process -1 pair of additional reversing lights rear, switched on in reverse gear -Wood widening planks - larch (option)

Condition: used, mileage: 169,000 km, power: 315 kW (428.28 HP), first registration: 04/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 5,000 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Int. No.: 219 Very well-maintained VOLVO FMX 420 6x6 with a powerful HIAB crane * VOLVO * FMX * 6x6 ALL-WHEEL DRIVE * Differential locks * Leaf spring/air suspension * Permissible total weight 26,000 kg (technical 35,000 kg) * Three-sided tipper designed as a rock tipper, made of Hardox * Side board * CRANE HIAB 232-E5 HiPRO * REMOTE CONTROL for CRANE Fodsz Nugtopfx Afdogh * 5x hydraulic extensions + 1x manual * 2x fully hydraulic outriggers * Hook height approx. 21m * Lateral reach, see load chart * WINCH * Central locking * 2-seater * Radio * AIR CONDITIONING * Very good condition * 1st owner * VAT can be shown!!! Trade-in possible Financing from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typographical and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany on request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!!

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed Fjdpfx Afjv Sw E Aodjgh * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: excellent (used), mileage: 804,000 km, power: 338 kW (459.55 HP), first registration: 07/2016, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 2016, operating hours: 2,767 h, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, parking heater, power assisted steering, = Additional Options and Accessories = - Adaptive Cruise Control - Alarm System - Rear Work Lights - Heated Mirrors - High Beam Lights - Refrigerator - Air Suspension - Radio/CD Player - Rotating Beacon - Rear View Camera - Sun Visor - Auxiliary Heater - Toolbox - Power Take-Off (PTO) - Central Lubrication System = Notes = 6x2 Euro 6 Palfinger PK 65002-SH (65 t/m crane) 6x hydraulically extendable outriggers Total working height approx. 20 m Operating hours only 2767 Remote control 4-point support Fodpfx Afszr Hmxsdsgh Saddle coupling height 1.30 m In very good condition! Immediately ready for operation. = Additional Information = Axle Configuration Maximum front axle load: 10000 kg Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg; Steerable Weights Unladen weight: 19,860 kg Payload: 12,140 kg GVW: 32,000 kg Functional Body manufacturer: Palfinger PK 65002-SH E CE marking: yes Condition Technical condition: very good Optical condition: very good Identification Registration number: 97-BHJ-8 Additional Information Please contact G. Damen or W. Schischke for further information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, total length: 9,060 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,450 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Fgedpfoy H Hdpsx Afdeh Attractive and fully functional Van Hool 20FT tipper chassis (year of manufacture 2003) with ABS/EBS, SAF axles with disc brakes (Intradisc), 2 lift axles, ADR certification (EXII, EXIII, FL, AT), tipping functionality with 24V connection up to a 20° tipping angle, unladen weight: 5,300 kg, gross permissible weight: 39,000 kg, tyres: 385/65-R22.5 (tread left: 4/11/12 mm; tread right: 9/11/9 mm), Dutch registration = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle make: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: LM rims; lift axle; max. axle load: 9,000 kg; tyre tread left: 25%; tyre tread right: 55% Rear axle 2: LM rims; lift axle; max. axle load: 9,000 kg; tyre tread left: 70%; tyre tread right: 70% Rear axle 3: LM rims; max. axle load: 9,000 kg; tyre tread left: 75%; tyre tread right: 55% Weights Unladen weight: 5,300 kg Payload: 33,700 kg gross vehicle weight (GVW): 39,000 kg Functionality Body make: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Identification Registration number: OH-91-FS Further Information Please contact Arne Honingh for more information.

Condition: used, mileage: 130,000 km, power: 309 kW (420.12 HP), first registration: 02/2001, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro2, total width: 2,550 mm, total height: 4,000 mm, loading space length: 7,370 mm, loading space width: 2,506 mm, Equipment: ABS, crane, SN: 83 Volvo FM12 8x4 BB, split loading platform, flatbed and rear tipper, cruise control, engine brake Crane: Palfinger PK33000ELB, continuous slewing system, 3 hydraulic extensions with hydraulic winch and fly jib with 2 hydraulic extensions, radio remote control Crane: Manufacturer: Palfinger Model: TK 33000 ELB Continuous slewing system 4 outriggers Outrigger width front: 6,150 mm Outrigger width rear: 5,100 mm Outrigger length (front to rear): 7,500 mm Crane support pads: 4 1x spotlight on crane boom Incl. wired remote control Incl. radio remote control Incl. 4x batteries Hydraulic winch with Danfoss motor Standard lifting capacity of hydraulic winch: approx. 1,500 kg Year built: 2001 Crane operating hours: 13,720 Extensions: 3x hydraulic Maximum lifting capacity at outreach (fly jib removed): 21.20 m at 19° inclined straight / 990 kg 20.30 m at 19° / 1,050 kg 18.60 m at 30° / 1,200 kg 15.20 m at 45° / 1,490 kg 10.80 m at 60° / 2,070 kg 5.60 m at 75° / 3,800 kg Minimum lifting capacity at outreach: 5.20 m at 85° / 3,470 kg Fly jib extensions: 2x hydraulic Outreach 13.00 m at 75° / 760 kg, hook height 20.00 m Outreach 21.00 m at 45° / 700 kg, hook height 16.00 m Outreach 26.00 m at 0° / 560 kg, hook height 2.50 m Max. hook height: 29.00 m Platform body: Rear tipper Split loading platform Drop sides foldable and removable Intermediate strut drop sides foldable and removable Drop sides split into 3 sections Overall loading area dimensions LxW: 7,370 x 2,506 mm Tipper length: 4,900 mm Flatbed length: 2,460 mm Drop side height: 600 mm Loading height: 1,433 mm Rear drop side split in two 4 lashing points each side on loading platform Volvo FM12 flatbed 8x4 BB: 1 ignition key Wheelbase: 1,800 + 3,320 + 1,360 mm Suspension: leaf / leaf / leaf / leaf Fgjdpjy Aqhdofx Afdjh Axle configuration: 8x4 Drum brakes Side and rear underrun protection 2 toolboxes right 1 toolbox left External sun visor Mechanical cab suspension ABS Engine brake Cruise control 1 rear window in fixed glazing High-mounted exhaust Parking brake shut-off valve Electric windows Mirror heating Manual lifting roof (roof hatch) 1 sun visor driver’s door Differential lock Air-suspended driver’s seat 2-piece front sun visor Rubber floor mats PTO for crane operation 2 rotating beacons Front metal bumper Gearbox with splitter BekaMax centralized lubrication for truck Total vehicle length: 10,750 mm Spare wheel bracket including spare wheel Tyres: 315/80R22.5 on steel rims Tread depth tyres left: 1st axle: 10 mm, 2nd axle: 8 mm, 3rd axle outer: 18 mm, 3rd axle inner: 18 mm, 4th axle outer: 18 mm, 4th axle inner: 18 mm Tread depth tyres right: 1st axle: 12 mm, 2nd axle: 13 mm, 3rd axle outer: 18 mm, 3rd axle inner: 18 mm, 4th axle outer: 18 mm, 4th axle inner: 18 mm