Mini crane

Maeda MC 285 CRME Diesel + Electric!

Condition: good (used), fuel type: hybrid, color: green, mast type: telescopic, Year of construction: 2008, operating hours: 596 h, Maeda MC 285 CRME. Kodpfez A A Taox Actjdt Year of manufacture: 2008. Operating hours: 596. Weight: 2120 kg. CE compliant. Diesel and electric drive. 4-point outrigger support. Hook block. Lifting capacity: 2.85 t. Non-marking tracks. Condition of undercarriage: 70%. Max. reach: 8.205 m. Max. working height: 8.575 m. Dimensions: L: 3500 mm. W: 700 mm. H: 1450 mm. 2 units available! ID No.: 177. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By making any form of contact, you accept the validity of Heinhuis’ General Terms and Conditions and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further Information = General Information Year of manufacture: 2008 Serial number: P00709 Technical Information Fuel type: Hybrid (electric and diesel) Drive: Tracked Unladen weight: 2,120 kg Dimensions (L x W x H): 350 x 70 x 145 cm Functional Lifting capacity: 2,850 kg CE marking: yes Condition Technical condition: good Optical condition: good Product safety EU responsible: tom kienhuis Darwin 16 7609RL Almelo = Company Information = For more information:

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included Kjdsk Af Svopfx Actedt -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, machine/vehicle number: WDB9506042L758582, mileage: 250,500 km, power: 213 kW (289.60 HP), first registration: 01/2013, tire size: 315/80 R22.5, axle configuration: 6x2, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: steel-air, total length: 10,200 mm, total width: 2,550 mm, total height: 3,750 mm, loading space length: 6,350 mm, loading space width: 2,500 mm, loading space height: 700 mm, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - Sper = Remarks = Cabin Right hand drive: ✓ Chassis Chassis height: 100 cm Wheelbase: 490 cm (1-2) 135 cm (2-3) Fuel tank capacity: 350 L Structure Open box: ✓ Tank Fuel: ✓ Crane Number of hydraulic extensions: 2 Number of support legs: 2 Remote control: ✓ Rotator: ✓ Squeeze Box: ✓ Maximum crane load capacity : 1325 kg Maximum crane reach: 7.90m NON-DUTY FREE, REQUIRES CUSTOMS CLEARANCE // RIGHT-HAND DRIVE // Fassi F110 A.0.22 loading crane with grappler and rotator, Year of construction 2013, 2 Hydraulic extensions, 2 Support legs, Radio control, Max reach 7.90 M, Max Loading capacities 1325 kg at 7.90M, Platform dimensions 635x250x70 cm, Load height 130 cm // Truck 6x2, Euro 5, Adblue, Manual gearbox with 8 gears, Diff. lock, Steel front suspension, Air rear suspension, 3rd axle lift axle, Day cabin, Airconditioning, RIGHT-HAND-DRIVE, Digital tachograph, Shipment dimensions 1020x255x375 cm = More information = Axle configuration Tyre size: 315/80 R22.5 Axle 1: Steering; Tyre profile left: 70%; Tyre profile right: 75%; Suspension: leaf suspension Axle 2: Double wheels; Tyre profile left outer: 65%; Tyre profile right outer: 50%; Suspension: air suspension Axle 3: Lift axle; Tyre profile left: 60%; Tyre profile right: 60%; Suspension: air suspension Weights Empty weight: 11.240 kg Carrying capacity: 13.760 kg GVW: 25.000 kg Functional Crane: Fassi F110, year of manufacture 2013, on rear of chassis Height of cargo floor: 130 cm Identification Registration number: PJ13CVH = Dealer information = Ksdpfx Aceu H H Rnstjdt For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, Year of construction: 1987, Liebherr 35 K stationary crane With transport axles in very good condition Kdsdjpbvn Nspfx Actjt

Condition: new, Year of construction: 2025, Equipment: all wheel drive, Mecalac 9 MWR Wheeled Excavator > Demo machine > Approx. 5 operating hours > Approx. 8,200 kg own weight > Water-cooled 4-cylinder Deutz diesel engine with 55.4 kW / 75 HP output > Travel speed 35 km/h > 500/45 R20 tires including mudguards > Four-wheel, front-wheel, and crab steering > Adjustable boom > Articulated boom > 2 x proportional auxiliary circuits on joystick > Dozer blade > Rear-view and side cameras > Refueling pump > Air conditioning > Rotating beacon > Work lights > Central lubrication system > Powertilt with Lehnhoff HS08 quick coupler (hydraulic) > Air-suspended driver's seat > Radio with speaker > 1 x 1600 mm rigid ditch cleaning bucket > 1 x 400 mm tooth bucket > 1 x 800 mm tooth bucket Transport? No problem! Kdjdpfx Acjxbmadjtst Financing? Just ask us!

Condition: used, mileage: 456,492 km, power: 125 kW (169.95 HP), first registration: 05/2000, fuel type: diesel, overall weight: 7,490 kg, color: green, gearing type: mechanical, number of seats: 2, Equipment: crane, * Remote control Kdjdpfor A Adcsx Actst * 28 meters lifting height * Max load capacity : 500Kg * Klaas superstructure * Hatz diesel engine

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Ksdpfel Sl Izex Actedt Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: used, mileage: 526,060 km, power: 170 kW (231.14 HP), first registration: 03/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: silver, gearing type: mechanical, emission class: euro3, loading space length: 7,370 mm, loading space width: 2,480 mm, loading space height: 500 mm, Year of construction: 2006, Equipment: ABS, air conditioning, crane, Equipment: * Body/Structure: Flatbed with crane superstructure, * Air conditioning * Towing hitch with two-line trailer brake, * Ball head towing hitch, * Driver seat: comfort suspension seat, * Middle seat with seatbelt, * Roof hatch (steel), * 6-speed manual transmission Superstructure: * Flatbed with aluminum side walls, * Internal dimensions: 7,370 mm x 2,480 mm x 500 mm, * Front wall protection grid, * Lashing eyes, * Toolbox, Crane: Atlas crane 85.2-7.3/2, year of manufacture 2002, Lifting capacity/outreach: * 2.25 t at 3.85 m * 1.52 t at 5.55 m * 1.14 t at 7.25 m Technology: * Radio navigation system, * Electrically adjustable and heated exterior mirrors, * Voltage converter 24V / 12V 8A, * Circuit breaker, Safety/Environment: * Telligent brake system with ABS, * Rear axle differential lock, * Engine brake with constant throttle, Other: * German first delivery, * 1 previous owner, * Engine: 6.4 L - 170 kW Diesel (OM 906 LA), * Suspension: leaf / air, * Payload 3,835 kg according to registration certificate, * Permitted gross vehicle weight 11.99 t Since 1972, your reliable partner for cars/commercial vehicles in 28832 Achim am Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly holds approx. 200 vehicles from the areas of vans, commercial vehicles and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Kjdpfx Acjuvfqqjtodt Delivery of your “new” commercial vehicle is possible via our external partners for an additional charge. The information given in advertisements, on the Internet, price tags and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typographical errors or data transmission errors. Listed equipment items must be checked separately where applicable. Subject to prior sale and errors.

Condition: used, functionality: fully functional, mileage: 291,200 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,998 mm, fuel: diesel, color: white, driver cabin: day cab, emission class: euro3, Year of construction: 2006, Equipment: crane, IVECO DAILY 65C17 Kdodpfxjzlp Urj Actet 4x2 - Year 2006 DIESEL/ Euro 3 Mileage: 291,200 km Manual transmission/ Engine displacement: 2998 cc/ Power: 122 kW GVW: 65 quintals/ Driving license: C Payload: 2,750 kg/ Wheelbase: 3,450 mm Equipment: - TIPPING BODY: 3140x2220 mm - PM 3523 crane

Condition: like new (used), functionality: fully functional, mileage: 285,000 km, first registration: 02/2018, fuel type: diesel, maximum load weight: 13,370 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 3 axles, fuel: diesel, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 7,600 mm, loading space width: 2,550 mm, Equipment: ABS, AdBlue, USB port, air conditioning, cable winch, central locking, cruise control, differential lock, electric window regulation, hill-start assist, lane keeping assist, power assisted steering, power mirror, seat heater, traction control, IVECO 260S36 LOW-BED/FLATBED 3 AXLE 6X2 for transporting cars, commercial vehicles, agricultural vehicles, etc. CODE: 12262 YEAR: 2018 KM: 285,000 WHEELBASE: 4,800 mm EURO 6 AUTOMATIC TRANSMISSION + RETARDER REAR AIR SUSPENSION BED SIZE: 8.00 x 2.55 m – USEFUL INTERNAL LENGTH: 7.60 m DEmountable Flatbed Function HYDRAULIC WINCH LIFTING AND STEERING THIRD AXLE REAR STABILIZERS REMOTE CONTROL FOR RAMP + WINCH PAYLOAD: 13,370 kg FITTED WITH /70 TYRES DIFFERENTIAL LOCK STEEL BUMPER Kedpex Uyt Hofx Actodt AIR CONDITIONING CAB WITH REAR WINDOW CENTRALIZED DOOR LOCKING EXTERNAL SUN VISOR Vanzetto Industrial Vehicles Via Rovigana, 47/G 35043 Monselice (PD) Contact: Umberto Vanzetto We have available: TRUCKS, LORRIES, IVECO, MERCEDES, VOLVO, RENAULT, DAF, MAN, SCANIA, FIAT, DAILY, EUROCARGO, STRALIS, TRAKKER, TIPPER, DEMOUNTABLE, CURTAIN SIDE, TARPAULIN, VAN, BOX BODY, REFRIGERATED, FRIDGE, INSULATED, FIXED BODY, TRACTOR UNIT, TRAILERS, RIGID TRUCKS, DRAWBAR TRAILERS, SEMITRAILERS, CHASSIS, Stralis 310, 330, 420, 450, 460, STRALIS 480, 500, eurocargo, 75, EURO CARGO 80, 90, 100, eurocargo 120, 140, 150, eurocargo 160, eurocargo 180, 190, eurostar, eurotech, eurotek, turbo star, cursor, moving floor, crane, fitting, sides, waste, farid, compactor, tanker, tub, used, Italy, Monselice, Solesino, Padova, LOW-BEDS, FLATBEDS, CAR TRANSPORT, TRACTOR TRANSPORT, ROADSIDE ASSISTANCE, Veneto, for sale, commercial industrial vehicles, for sale. RECOVERY TRUCK / FLATBED / LOW-BED / MACHINERY TRANSPORT.