Container transportation

D-tec Extendable container transport trailer

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied Kodpeyvnd Nefx Actedt * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting...

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2004, * Caster steering axle * Air suspension * Bulkhead * Unladen weight: 6,200 kg -----Internal vehicle number: 9150-----Subject to errors and prior sale. Kjdpewi Edmefx Actjdt

Condition: used, axle configuration: 3 axles, first registration: 07/2002, Year of construction: 2002, Equipment: ABS, = Additional options and accessories = - Air suspension - Disc brakes = Further information = Kdodpjy Sag Uofx Actst Empty weight: 3,840 kg Payload: 34,160 kg Gross vehicle weight: 38,000 kg Damage: none

Condition: used, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Schwarzmüller Platform Flatbed Trailer Lift Axle Permissible total weight: 36,000 kg, Unladen weight: 5,750 kg, Payload: 30,250 kg, SAF axles, Lift axle 1st axle, Kdodpfx Aewqyrhoctet Air suspension, Disc brakes, Underride protection right, left, and rear, 2x storage compartment right, 1x storage compartment left, Rubber rear impact buffer, 2x extensible wide load signs at the front, 2x extensible wide load signs at the rear, 2x crank supports operable from right side, EBS, ABS, Perforated external frame with hole spacing approx. 100 mm, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, External dimensions LxW: approx. 13,840 x 2,550 mm, Loading area LxW: approx. 13,620 x 2,480 mm, Front wall height: approx. 2,400 mm, Loading height: approx. 1,250 mm, Tires: 385/65R22.5, Tread depth tires left front: 4 mm, Tread depth tires left middle: 16 mm, Tread depth tires left rear: 8 mm, Tread depth tires right front: 5 mm, Tread depth tires right middle: 15 mm, Tread depth tires right rear: 10 mm, Further equipment: Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm), Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640 Air suspension with lift and lower function (approx. +120/-80 mm), Automatic setting of driving level from 15 km/h, SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm, Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation), 1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right), Mech. 2 x 12 t support winches, single-sided operation and push compensation, Two-line brake, EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored), RSS - stability program, Spring-loaded parking brake on 2 axles, Aluminum air tank, unpainted, Plywood floor 27 mm, flush with outer frame, 2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame, Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,

Condition: used, maximum load weight: 29,200 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2007, loading space length: 13,470 mm, loading space width: 2,470 mm, Equipment: ABS, Foedisch FOEAPL13.6 Platform Payload 29200 kg Tires 385/65 R 22.5 Lift axle 1st axle Kdsdpeu Ddldefx Actot Trailer length 13800 mm Loading area L x W 13470 x 2470 mm Loading height approx. 1400 mm

Condition: used, machine/vehicle number: SMRS3ARX8N027057, first registration: 10/2008, tire size: 385/65 R22.5, axle configuration: 3 axles, color: other, suspension: air, Year of construction: 2008, Chassis Diameter coupling pin / coupling plate: 2 inc Height of coupling pin / drawbar: 125 cm Structure Container construction: Jost Tank Fuel: ✓ Stack of 3 Sliding container skeletal trailer, Montracon 2008, Suitable for 1 x 45 ft, 1 x 40 ft, 2 x 20 ft and 1 x 30 ft containers,, ABS, Air suspension, Gigant axles, Drum brakes, Tyres 385/65R22.5, King pin height 125 cm, Kingpin diameter 2 inches, Loading height 140 cm, Shipment dimensions : 1230x250x400 cm. = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Gigant Brakes: drum brakes Suspension: air suspension Axle 1: Tyre profile left: 45%; Tyre profile right: 45% Axle 2: Tyre profile left: 45%; Tyre profile right: 45% Axle 3: Tyre profile left: 45%; Tyre profile right: 45% Weights Empty weight: 4.850 kg Carrying capacity: 34.150 kg GVW: 39.000 kg Functional Height of cargo floor: 140 cm Identification Registration number: C272022 Kdedpfxsu H Erwo Actst = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Year of construction: 2000, condition: used, No guarantee. Please contact us if you can't find what you are looking for = More information = Year of manufacture: Feb 2000 Ksdpfouwp T Tex Actjdt New: No

Condition: used, maximum load weight: 32,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2015, next inspection (TÜV): 08/2027, loading space length: 13,630 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 3,331 mm, Year of construction: 2015, Equipment: ABS, 3-axle Krone SD platform semi-trailer with stake pockets VIN: 670643 Chassis / Components: * Air suspension // Raising and lowering * Steerable axle * Jost support legs * 3 x BPW axles with disc brakes * Tires: 385/65 R22.5 * Fifth wheel height approx. 1140 mm * Pallet box * 2 x widening panels Superstructure: * Platform with stake pockets * Steel coil transport * Multilock * 5 x tensioning winches per side with steel cable * 6 x heavy-duty lashing eyes per side * Holder for plug-in stakes, left and right * Stake pockets arranged variably on the platform * 6 x stake pockets per side extendable (for widening) * Certificate: EN 12642 Code XL Weights: * Gross vehicle weight: 39,000 kg * Tare weight: 6,560 kg Kjdsz Dc D Ujpfx Actsdt * Payload: 32,440 kg Other: * German semi-trailer * 1 previous owner * MOT / Inspection / ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and transport of your purchased vehicles within Germany is also possible. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing & spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we place great importance on customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day passes / export license plates We will gladly assist you in obtaining export/short-term license plates.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2023, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 1,350 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 2,950 mm, suspension: air, tire size: 385/65R22,5, color: grey, Year of construction: 2023, Faymonville Maxtrailer F-S43-1AAF. Year of manufacture: 2023. 9-ton BPW axles. Tare weight: 6,858 kg. Payload: 38,142 kg. Gross vehicle weight: 45,000 kg. Kingpin load: 18,000 kg. EBS, ABS, ALB. Galvanized. Prepared for twistlocks. Air suspension. Toolboxes. Tires: 385/65R22.5 (70% tread). Dimensions of loading platform: L: 13,600 mm. W: 2,550 mm. H: 1,350 mm. Overall dimensions: L: 13,900 mm. W: 2,550 mm. H: 2,950 mm. ID No.: 674. Heinhuis' general terms and conditions apply to all advertisements, offers, and quotations from Heinhuis, as well as to all contracts concluded by Heinhuis and the negotiations preceding them. By contacting us in any way, you accept the validity of Heinhuis' general terms and conditions and declare that you have taken note of these general terms and conditions. Our prices are net export prices. = Further information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 70% Kdjdezw Ehrepfx Actjt Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 70% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 70%; Tire tread right: 70% Weights Tare weight: 6,858 kg Payload: 38,142 kg GVW: 45,000 kg Functional Loading platform height: 135 cm Condition Technical condition: very good Optical condition: very good = Company information = For more information:

Condition: used, machine/vehicle number: 231, empty load weight: 7,200 kg, maximum load weight: 28,800 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2004, loading space length: 13,600 mm, loading space width: 2,460 mm, suspension: air, tire size: 385/65 r22,5, color: blue, Equipment: ABS, Disc brake EBS Wheelbase 1,310 mm BPW axles Kjdpenn Dplofx Actedt Lifting and lowering device Errors excepted