Low loader

FAYMONVILLE 60T STZ-3A (+6m) EXTENDABLE / AUSSCHIEBBAHR - 3...

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. Dsdezqiiaepfx Ak Tekt - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: used, overall weight: 26,000 kg, axle configuration: 3 axles, first registration: 04/2006, next inspection (TÜV): 04/2026, Year of construction: 2006, Equipment: ABS, Everything XXL works Dodjy Ag Nwjpfx Ak Tjkt

Condition: new, maximum load weight: 23,920 kg, overall weight: 30,000 kg, axle configuration: 3 axles, NEW VEHICLE Fliegl 3 axle low loader type DTS 300, hot-dip galvanized Total weight 24,000 kg / 30,000 kg Payload 17,920 kg / 23,920 kg Empty weight 6,080 kg Total length 10,900 mm Loading length 8,680 mm Loading bed 6,500 mm including 900 mm approach slope Parabolic suspension Long ramps 2,800 mm with hydraulic operation Wider widths to 3,000 mm with warning signs and rotating beacon Large lashing package with 5.0 and 10.0 ton lashing points Dksdpfxoxb Nmyj Ak Tot 5 pairs of stake pockets Towing eye 40 mm Plus pre-freight / provision from the Wiesmoor storage location 1,280.00 €/ Net Rent-to-own offer: term 48 months, residual value 40%, down payment only VAT. Monthly rate: EUR 500.00

Condition: used, maximum load weight: 33,400 kg, overall weight: 46,000 kg, axle configuration: 3 axles, first registration: 09/1998, Year of construction: 1998, Equipment: ABS, * DOLL S3H * Extendable * Radio-controlled steering axle * Tires approximately 80% tread Dodpfezhy A Sox Ak Tskt * Total weight 46,000 kg * Payload 33,400 kg * Year of manufacture: 1998 * Good condition * Working hours: Mon-Fri 07:30-12:00, 13:00-18:00, Saturday 07:30-17:00. * E-mail: * Tel/WhatsApp/Viber: Alexandar Ilic * Tel/WhatsApp/Viber (English): Mladen Ilic

Condition: used, empty load weight: 9,520 kg, maximum load weight: 38,480 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2020, suspension: air, tire size: 235/75 R17,5 140J, color: other, gearing type: other, front tire size: 235/75 R17,5 140J, rear tire size: 235/75 R17,5 140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Djdpfx Aszxnmmsk Tjkt

Condition: used, axle configuration: 3 axles, first registration: 10/2008, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = Dkodpfx Akezn Ario Tjt - Air suspension - Steering axle = Remarks = Broshuis, 2008, SAF axles, As 3 sent, Extendable = More information = Rear axle 1: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 22,100 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Heavy-duty welded steel low-loader turntable trailer with robust ball-bearing turntable. Folding rear support. Aluminium side underrun protection. Full-width rear mud flap. Quarter mudguards in front of the 1st axle. Extendable loading platform up to 3,000 mm. Integrated storage compartment for timber extension beams. 70 mm timber extension planks included. Two pairs of recessed wheel wells: Front wheel wells behind the gooseneck, approx. 1,600 mm long and 400 mm deep. Rear wheel wells between the axles, approx. 600 mm long and 300 mm deep. Removable steel covers for wheel wells. Main frame spacing approx. 1,280 mm in wheel well area. Lashing Equipment 1 pair of 10 t lashing cut-outs in the gooseneck 4 pairs of 5 t lashing holes in the outer gooseneck frame 7 pairs of recessed 10 t lashing mushrooms Lashing point spacing max. 1,100 mm Recessed stake pockets (70 × 40 mm), convertible to 5 t lashing rings Additional 10 t folding lashing rings on the gooseneck and rear beavertail Drawbar Height-adjustable drawbar with certified 40 mm towing eye. Axles & Suspension SAF drum brake axles Laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption Air suspension with raise/lower valve Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver Braking System Dual-line air brake system Spring parking brake Electronic Stability Program (ESP) Axle load indication via EBS CAN bus Front air couplings with connecting lines Parking sockets for ABS/EBS and air connections 24 V EBS with front connector Trailer Info Module displaying axle loads, mileage and diagnostic data Electrical System 24 V full LED lighting Dedpfxezl Uv Uj Ak Tekt LED side marker lights LED number plate light LED front position lights LED rear outline marker lights Parking sockets for electrical connections Extendable illuminated LED warning boards up to 3,000 mm Loading Platform Steel chequer plate on gooseneck Integrated storage box in transition area Approx. 70 mm timber floor Steel chequer plate over wheel wells Rear beavertail with 70 mm timber decking Total low-bed deck length incl. beavertail: 6,500 mm Loading Ramps Hydraulic steel loading ramps Length: 3,000 mm Width: 750 mm Side-adjustable Foldable lower ramp locking system Mega Grip serrated grating surface with chequer plate ramp tips Hydraulic operation via tractor PTO with flow restrictor Hydraulic connection with SVK coupling (NW 10/3)

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2008, Visit our website, where you’ll find our complete vehicle inventory with many more photos and information in multiple languages. SEL 8001 Meusburger MTS-3 Telescopic / 13,085 - 17,385 mm / Steering axle German registration First registration: 18.11.2008 Technical permissible total weight (kg): 49,000 Permitted total weight (kg): 47,000 Unladen weight (kg): 7,670 VIN: W09TS300980M49145 TIRES AND AXLES: Tires: 245/70 R 17.5 Axle configuration: 3 axles BPW 3rd axle: friction-guided trailing axle Air suspension Drum brakes ADDITIONAL SPECIFICATIONS: Telescopic VEHICLE DOCUMENTS: Registration certificate (Schein) Vehicle Title (Brief) Dodpfx Akoxpl Nto Tjkt M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information provided, we cannot accept liability for errors or omissions. We kindly ask our customers to consult the photos provided. The indicated measurements are approximate values. Our vehicles are sold in their current condition. We invite customers to visit our facility to inspect the vehicle in person. Test drives are also available. Please note the batteries supplied with the vehicle are those currently installed. If new batteries are required, we can provide a quote upon request.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,239 h, lifting height: 10,000 mm, fuel type: diesel, tire condition: 80 %, drive condition: 80 %, color: red, axle configuration: 4x4, operation weight: 3,819 kg, Equipment: all wheel drive, GENIE GS-2669RT - 10 m, 4x4, diesel Construction Year: 2016 Fuel: Diesel Type: scissor lift Category: Working platform Working height: 10 m Lifting force: 680 Kg Weight: 3819 Kg Operating Hours: 1239 Feature Sets: Four wheel drive (4x4). Description: scissor lift GENIE, type: GS-2669RT 4x4 (diesel) with moveable pleateau, 680 kg lifting force (people / material) Dkodpfx Aovndwwjk Tet Immediately operational state. The machine has good condition. If you have some questions about this machine please write me an e-mail. We can speak: - English - German - Hungarian

Condition: used, maximum load weight: 39,950 kg, overall weight: 49,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 07/2027, Equipment: ABS, * MEUSBURGER MTS-3 Tele - Low-bed trailer - 3-axle, extendable semi-trailer * Registered: 05/2018, next inspection: 07/2027 * GVWR: 49t / 47t, permissible load: 39.95t / 37.95t * Unladen weight: 9,050 kg * Mileage: 335,000 km * ABS/EBS * BPW Eco Plus axles, air suspension, lift/lower function, 235/75R 17.5, drum brakes * Integrated pressure gauge on the chassis * 3rd axle: steering axle (trailing-arm steering, lockable) * Excavator arm rest * 2 wheel recesses with solid aluminum approach ramps * 25 lashing points * Widening outriggers up to 3m / warning signs and mounting for a beacon light * Mounting for a beacon light at the rear * 3 ladder beam strips transverse to the loading area * 5 pairs of heavy-duty lashing points in the outer frame * 3 heavy-duty lashing points in the center of the loading area, 2 more in the excavator arm rest * 12 pairs of ladder beam recesses in the outer frame * Mechanical ALTEC aluminum ramps, two-part, foldable and laterally adjustable * Loading height above wheels: approx. 0.92m, sloped at the rear * Loading height in wheel recess: approx. 0.55m * Gooseneck: 0.9m x 2.80m Dkjdpfx Akjzyw Dwj Tjt * Fifth wheel height: approx. 1.05 - 1.20 m * Length to gooseneck: approx. 9.10m, centrally extendable, sliding table + approx. 4m extension * Overall length: 13,085 + 17,385m * Wood/steel floor * 2 possible positions for the kingpin * ---- * We also gladly accept your old vehicle as a trade-in! * Lease purchase for 24 - 72 months with or without a down payment is possible. * Export registration, short-term registration and export clearance are possible. * WhatsApp * ----Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of opening hours, we are available by appointment.