Semitrailer

GOLDHOFER 3-Achs SPZ-DL3-38/80 Spezial 20,5meter + 3xLenk

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 12/1997, Equipment: ABS, Goldhofer 3-axle special trailer / long material transporter Type: SPZ-DL 3-38/80 Permissible total weight: 48,000 kg Permissible front axle load: 18,000 kg Bsdpfx Abozt T Rmsvell Permissible rear axle load: 30,000 kg Air suspension + 3 x STEERABLE axles Overall length: 20,500 mm ! German registration! For further dimensions, please refer to the drawing. Upon request, this can also be sent in PDF format in high resolution. ! Further information available upon request via email! Information provided without guarantee/subject to errors! Information provided on the internet is a non-binding description and does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, and data transmission errors. Subject to change. Continuous buying and selling as well as trade-in and rental of crane and lifting vehicles as well as construction machinery and heavy-duty vehicles.

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers Bledok Af Svspfx Abvjl -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, mileage: 465,082 km, power: 368 kW (500.34 HP), first registration: 05/2018, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, soot filter, Vehicle Identification Number: WMA30XZZ1JM791210 Tipper hydraulics Mileage: 465,082 km German MOT (HU) due Unladen weight: 9,338 kg Axle loads: Axle 1: 8,000 kg, Axle 2: 11,500 kg ----XL driver’s cab ZF-Intarder, Digital tachograph Automatic climate control, auxiliary heater, single bunk, Radio-USB/Bluetooth/DAB, toll pre-installation, multifunction steering wheel, refrigerator, seat heating, Bljdpfx Ajwik Htjbvjl lane departure warning system Leaf spring suspension front / air suspension rear Wheelbase: 3,300 / 1,380 mm Tank: 400 l diesel Fifth wheel height: 1,300 mm = 2.0 inches Tyres: 1st axle: 385/65 R 22.5 2nd + 3rd axle: 315/80 R 22.5 Subject to change, prior sale, and errors excepted. The description serves solely for the general identification of the vehicle and does not constitute a warranty in the legal sense. The binding description is as per the purchase contract. Our offer generally does not include new TÜV (MOT) inspection. Should a new TÜV inspection be required, we are happy to provide a quote from our partner workshops. Vehicle may carry advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.