Low loader

Ozgul LW4 EU FIX

Condition: new, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = TECHNICAL SPECIFICATIONS WEIGHTS & DIMENSIONS Gross Vehicle Weight (kg): 70,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 48,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 13,000 Loading Platform Height (mm): 920 Payload (kg): 57,000 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty and extra durable BOX-type chassis, all welded S355 steel. Outer frame is a UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automatic robot welding. Axle (Type): Özkoç Trax or Osman Koç, Turkish brand, drum brakes, 4 x 12-ton axles. Axle Lifting: 1st axle automatic, 4th axle manual lifting. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): 1 position with 1 x coupling pin 2” (EU approved), Çayırova brand. Tires: 16 + 1 units, 245 / 70 R 17.5, Fulda or Pirelli or Goodyear brand. Rims: 16 + 1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive, with ADR adaptation. Brake Chamber: 2 axles with 4 units of emergency brake chambers. 2 axles with 4 units of service brake chambers. Electric System: 24V, 2 x 7 + 1 x 15 pin sockets, according to SAE standard with ADR adaptation, SABA brand. • 2 x Rear stop lights. - 4 x Side LED lights. • 2 x White LED lights - 2 x Front LED lights • 2 x Registration plate lights - 2 x Rotating lights Floor: Above the tires and edges of the platform, the floor is covered with chequered sheet and hardwood; the middle surface is covered with flat sheet steel. Rear Loading Ramps: Hydraulically operated rear ramps with electro-pump for rear ramp hydraulic function, with cable push-button for remote control. Folding-type rear ramps, length 2500 mm + 1500 mm, width 900 mm, fully steel. Rear ramps are sliding, both internally and externally, using hydraulics. Short steel ramps behind the gooseneck. Color: Upon Request Paint Application: Sand blasting, chemical cleaning, HYZINC coating, epoxy coating, and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 8 pcs of heavy-duty lashing rings mounted on the outer frame, mushroom type. • 4 x Certified spray mud flaps. • 1 x Plastic water tank. Lhjdpfezn Td Njx Ai Toi • 2 x Wheel chocks and holders. • 2 x 8 Galvanized side extension brackets, 250 mm + 250 mm. • 2 x Side protections, aluminium. • 1 x Tool box. • 1 x Spare wheel carrier with 1 tire (on the gooseneck). • 2 x Manual support legs at the rear. • 2 x Reflective tape and reflector signs at the rear and sides. • 2 x Side extension reflectors. • Steel front panel (height: 400 mm). • Aluminium side panels on gooseneck section (height: 400 mm). • 1 plaque placed on rear ramps or bumper. = Further Information = Unladen weight: 13,000 kg CE marking: yes

Condition: new, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = TECHNICAL SPECIFICATIONS WEIGHTS & DIMENSIONS Gross Vehicle Weight (kg): 70,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 48,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 13,000 Loading Platform Height (mm): 920 Payload (kg): 57,000 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty and extra durable BOX-type chassis, all welded S355 steel. Outer frame is a UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automatic robot welding. Axle (Type): Özkoç Trax or Osman Koç, Turkish brand, drum brakes, 4 x 12-ton axles. Axle Lifting: 1st axle automatic, 4th axle manual lifting. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): 1 position with 1 x coupling pin 2” (EU approved), Çayırova brand. Tires: 16 + 1 units, 245 / 70 R 17.5, Fulda or Pirelli or Goodyear brand. Rims: 16 + 1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive, with ADR adaptation. Brake Chamber: 2 axles with 4 units of emergency brake chambers. 2 axles with 4 units of service brake chambers. Electric System: 24V, 2 x 7 + 1 x 15 pin sockets, according to SAE standard with ADR adaptation, SABA brand. • 2 x Rear stop lights. - 4 x Side LED lights. • 2 x White LED lights - 2 x Front LED lights • 2 x Registration plate lights - 2 x Rotating lights Floor: Above the tires and edges of the platform, the floor is covered with chequered sheet and hardwood; the middle surface is covered with flat sheet steel. Rear Loading Ramps: Hydraulically operated rear ramps with electro-pump for rear ramp hydraulic function, with cable push-button for remote control. Folding-type rear ramps, length 2500 mm + 1500 mm, width 900 mm, fully steel. Rear ramps are sliding, both internally and externally, using hydraulics. Short steel ramps behind the gooseneck. Color: Upon Request Paint Application: Sand blasting, chemical cleaning, HYZINC coating, epoxy coating, and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 8 pcs of heavy-duty lashing rings mounted on the outer frame, mushroom type. • 4 x Certified spray mud flaps. Ledpfszn Tbbjx Ai Tohi • 1 x Plastic water tank. • 2 x Wheel chocks and holders. • 2 x 8 Galvanized side extension brackets, 250 mm + 250 mm. • 2 x Side protections, aluminium. • 1 x Tool box. • 1 x Spare wheel carrier with 1 tire (on the gooseneck). • 2 x Manual support legs at the rear. • 2 x Reflective tape and reflector signs at the rear and sides. • 2 x Side extension reflectors. • Steel front panel (height: 400 mm). • Aluminium side panels on gooseneck section (height: 400 mm). • 1 plaque placed on rear ramps or bumper. = Further Information = Unladen weight: 13,000 kg CE marking: yes

Condition: new, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = TECHNICAL SPECIFICATIONS WEIGHTS & DIMENSIONS Gross Vehicle Weight (kg): 70,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 48,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 13,000 Loading Platform Height (mm): 920 Payload (kg): 57,000 Height of 5th Wheel (mm): 1,310 CONSTRUCTIONS Base Chassis Heavy-duty and extra-durable BOX type chassis, designed with all-welded S355 steel. Outer frame is UPE 240 profile. Welding (Chassis): Automatic ARC submerged. Welding (Superstructure): Automatic robot welding. Axle (Type): Özkoç Trax or Osman Koç, Turkish brand, drum brakes, 4 x 12-ton axles. Axle Lifting: 1st axle automatic, 4th axle manual lifting. Suspension (Type): Air Suspension. Steering Axles: - Kingpin (Type): 1 position with 1x coupling pin 2" (EU approved), Çayırova brand. Tires: 16+1 units, 245 / 70 R 17.5, Fulda, Pirelli, or Goodyear brand. Rims: 16+1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated by one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive with ADR adaptation. Brake Chamber Lhodezn S Tispfx Ai Tsi 2 axles with 4 units emergency brake chambers. 2 axles with 4 units service brake chambers. Electric System 24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR adaptation, SABA brand. • 2 x Rear Stop Lights. - 4 x Side LED Lights. • 2 x White LED Lights - 2 x Front LED Lights • 2 x Registration Plate Lights - 2 x Rotating Lights Floor Above the tires and edges of the platform, it is covered with chequered sheet and hardwood; the middle surface is covered with flat sheet steel. Rear Loading Ramps : Hydraulically operated rear ramps with an electro-pump for the rear ramp hydraulic function, with a cable push-button for remote control. Folding-type rear ramps, length 2500 mm + 1500 mm, width 900 mm, covered in all steel. Rear ramps are sliding, internal and external hydraulic. Short steel ramps behind the neck. Color: Upon Request Paint Application Sand blasting, chemical cleaning, HYZINC coating, epoxy coating, and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 8 pcs of heavy-duty lashing rings mounted on the outer frame, mushroom type. • 4 x Certified spray mud flaps. • 1 x Plastic water tank • 2 x Wheel chocks and holders • 2 x 8 galvanized side extension brackets, 250 mm + 250 mm. • 2 x Side protections, aluminum. • 1 x Tool box. • 1 x Spare wheel carrier with 1 tire (on the gooseneck). • 2 x Manual support legs at the rear. • 2 x Reflective tape and reflector sign at the rear and sides. • 2 x Side extension reflectors. • Steel front panel (height: 400mm). • Aluminum side panels on the gooseneck section (height: 400mm). • 1 plaque placed on the rear ramps or bumper. = Further Information = Unladen weight: 13,000 kg CE marking: Yes

Condition: new, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = TECHNICAL SPECIFICATIONS WEIGHTS & DIMENSIONS Gross Vehicle Weight (kg): 70,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 48,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Unladen Weight (kg): 13,000 Loading Platform Height (mm): 920 Payload (kg): 57,000 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty and extra durable, BOX-type chassis designed with all-welded S355 steel. Outer frame is UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automatic robot welding. Axle (Type): Özkoç Trax or Osman Koç Turkish Brand, drum brakes, 4 x 12-ton axles. Axle Lifting: 1st axle automatic, 4th axle manual lifting. Suspension (Type): Air Suspension. Steering Axles: - Kingpin (Type): 1 position with 1 x coupling pin 2” (EU approved), Çayırova Brand. Tires: 16 + 1 units, 245 / 70 R 17.5, Fulda, Pirelli, or Goodyear Brand. Rims: 16 + 1 units, 6.75 x 17.5 steel rims, Jantas or Ako Brand. Landing Gear: Mechanically operated by one side, two-speed. Gos Brand. Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive with ADR adaptation. Brake Chamber: 2 axles with 4 units of emergency brake chambers. 2 axles with 4 units of service brake chambers. Electric System: 24V, 2 x 7 + 1 x 15 pin sockets, according to SAE standard with ADR adaptation. SABA Brand. Ljdpfx Aijzn S S Eo Tjhi • 2 x Rear Stop Lights. - 4 x Side LED Lights. • 2 x White LED Lights - 2 x Front LED Lights • 2 x Registration Plate Lights - 2 x Rotating Lights Floor: Above the tires and edges of the platform, there is checkered sheet and hardwood covering; the middle surface is covered with flat sheet steel. Rear Loading Ramps: Hydraulically operated rear ramps with an electro-pump for the hydraulic function, with a cable push-button for remote control. Folding-type rear ramps, length 2500 mm + 1500 mm, width 900 mm, fully steel-covered. Rear ramps slide internally and externally using hydraulic power. Short steel ramps behind the gooseneck. Color: Upon Request Paint Application: Sandblasting, chemical cleaning, HYZINC coating, epoxy coating, and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 8 pcs of heavy-duty lashing rings mounted on the outer frame, mushroom type. • 4 x Certified spray mud flaps. • 1 x Plastic water tank. • 2 x Wheel chocks and holders. • 2 x 8 Galvanized side extension brackets 250 mm + 250 mm. • 2 x Side Protections, Aluminium. • 1 x Tool box. • 1 x spare wheel carrier with 1 tire (on the gooseneck). • 2 x Manual support legs at the rear. • 2 x Reflective tape and reflector sign at the rear and sides. • 2 x Side extension reflectors. • Steel front panel (height: 400 mm). • Aluminum side panels on the gooseneck section (height: 400 mm). • 1 plaque placed on rear ramps or bumper. = Further Information = Unladen Weight: 13,000 kg CE Marking: Yes

Condition: new, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - Electronic Braking System (EBS) - Lift axle - Spare wheel = Notes = TECHNICAL SPECIFICATIONS WEIGHTS & DIMENSIONS Gross Vehicle Weight (kg): 70,000 Loading Platform Length (mm): 9,000 Weight of Axle Group (kg): 48,000 Total Length (mm): 13,550 Kingpin Capacity (kg): 22,000 Total Width (mm): 2,550 Curb Weight (kg): 13,000 Loading Platform Height (mm): 920 Payload (kg): 57,000 Height of 5th Wheel (mm): 1,310 CONSTRUCTION Base Chassis Heavy-duty and extra durable BOX-type chassis, all welded S355 steel. Outer frame is a UPE 240 profile. Welding (Chassis): Automatic ARC submerged welding. Welding (Superstructure): Automatic robot welding. Axle (Type): Özkoç Trax or Osman Koç, Turkish brand, drum brakes, 4 x 12-ton axles. Axle Lifting: 1st axle automatic, 4th axle manual lifting. Suspension (Type): Air suspension. Steering Axles: - Kingpin (Type): 1 position with 1 x coupling pin 2” (EU approved), Çayırova brand. Tires: 16 + 1 units, 245 / 70 R 17.5, Fulda or Pirelli or Goodyear brand. Rims: 16 + 1 units, 6.75 x 17.5 steel rims, Jantas or Ako brand. Landing Gear: Mechanically operated from one side, two-speed, Gos brand. Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive, with ADR adaptation. Brake Chamber: 2 axles with 4 units of emergency brake chambers. 2 axles with 4 units of service brake chambers. Electric System: 24V, 2 x 7 + 1 x 15 pin sockets, according to SAE standard with ADR adaptation, SABA brand. • 2 x Rear stop lights. - 4 x Side LED lights. • 2 x White LED lights - 2 x Front LED lights • 2 x Registration plate lights - 2 x Rotating lights Floor: Above the tires and edges of the platform, the floor is covered with chequered sheet and hardwood; the middle surface is covered with flat sheet steel. Lhjdpfozn S Nwjx Ai Toi Rear Loading Ramps: Hydraulically operated rear ramps with electro-pump for rear ramp hydraulic function, with cable push-button for remote control. Folding-type rear ramps, length 2500 mm + 1500 mm, width 900 mm, fully steel. Rear ramps are sliding, both internally and externally, using hydraulics. Short steel ramps behind the gooseneck. Color: Upon Request Paint Application: Sand blasting, chemical cleaning, HYZINC coating, epoxy coating, and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories: • 2 x 8 pcs of heavy-duty lashing rings mounted on the outer frame, mushroom type. • 4 x Certified spray mud flaps. • 1 x Plastic water tank. • 2 x Wheel chocks and holders. • 2 x 8 Galvanized side extension brackets, 250 mm + 250 mm. • 2 x Side protections, aluminium. • 1 x Tool box. • 1 x Spare wheel carrier with 1 tire (on the gooseneck). • 2 x Manual support legs at the rear. • 2 x Reflective tape and reflector signs at the rear and sides. • 2 x Side extension reflectors. • Steel front panel (height: 400 mm). • Aluminium side panels on gooseneck section (height: 400 mm). • 1 plaque placed on rear ramps or bumper. = Further Information = Unladen weight: 13,000 kg CE marking: yes

Condition: new, Year of construction: 2024, Equipment: ABS, = Further options and accessories = - Electronic braking system (EBS) - Lifting axis - Spare wheel = Notes = TECHNICAL SPECIFICATIONS MEASURES & DIMENSIONS -Gross Vehicle Weight (kg): 70,000 -Loading Platform Length (mm) : 9,000 -Weight of Axle Group (kg): 48,000 -Total Lenght (mm): 13,550 -Kingpin Capacity (kg) :22,000 -Total Width (mm): 2,550 -Curb Weight (kg): 13,000 -Loading Platform Height (mm): 920 -Pay Load (kg): 57,000 -Height of 5th Wheel (mm) : 1,310 CONSTRUCTIONS -Base chassis -Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis -Outer frame is UPE 240 profile -Welding (Chassis) : Automatic ARC submerged -Welding (Superstructure): Automatic robot welding -Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand -Drum brakes 4 x 12 Ton axles -Axle Lifting: 1st axle automatic 4th axle manual lifting -Suspension (Type): Air Suspension -Steering Axles :- -King pin (Type) : 1 position with 1x coupling-pen 2” -Tires: 16+1 units, 245 / 70 R 17.5 -Rims: 16+1 units, 6.75 x 17.5 steel rims -Landing Gear: Mechanically operated by one side, two speed -Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation -Brake Chamber -2 axles with 4 units emergency brake chambers. -2 axles with 4 units service brake chambers. Electric system -24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA Brand -2 x Rear Stop Lights. - 4 x Side LED Lights -2 x White LED Lights - 2 x Front LED Lights -2 x Registration Plate Lights - 2 x rotating Lights Floor Lsdpfjy E Nxasx Ai Tshi -Above tires and edges of platform are covered checkered sheet and hard wood -The middle surface is covered by flat sheet steel Rear loading ramps -Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable -push button for remote control -Folding type rear ramps length 2500 mm +1500 mm width 900 mm -Rear ramps are sliding internal and external hydraulic -Short steel ramps behind neck. Paint Application -Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint TECHNICAL SPECIFICATIONS ACCESSORIES -2 x 8 pcs of heavy duty lashing rings mounted on the outer frame mushroom type -4 x Certificated Expray mud flaps. -1 x Plastic water tank -2 x Wheel chocks and holders -2 x 8 Galvanized side extensions brackets 250 mm + 250 mm -2 x Side Protections, aluminum -1 x tool box. -1 x spare wheel carrier with 1 tire (on the gooseneck) -2 x manual support legs at the rear. -2 x Reflective tape and reflector sign at the rear and sides. -2 x side extension reflectors -Steel front panel(height:400mm) -Aluminum side panels on gooseneck section(height:400mm) -1 plaque places on rear ramps or bumpers = Further information = Curb weight: 13,000 kg CE marking: yes

Condition: new, Year of construction: 2024, Equipment: ABS, = Further options and accessories = - Electronic braking system (EBS) - Lifting axis - Spare wheel = Notes = TECHNICAL SPECIFICATIONS MEASURES & DIMENSIONS -Gross Vehicle Weight (kg): 70,000 Ledpfx Aioyil Ihj Tehi -Loading Platform Length (mm) : 9,000 -Weight of Axle Group (kg): 48,000 -Total Lenght (mm): 13,550 -Kingpin Capacity (kg) :22,000 -Total Width (mm): 2,550 -Curb Weight (kg): 13,000 -Loading Platform Height (mm): 920 -Pay Load (kg): 57,000 -Height of 5th Wheel (mm) : 1,310 CONSTRUCTIONS -Base chassis -Heavy duty and extra durability designed BOX type chassis All welded S355 steel chassis -Outer frame is UPE 240 profile -Welding (Chassis) : Automatic ARC submerged -Welding (Superstructure): Automatic robot welding -Axle (Type) : Özkoç Trax or Osman Koç Turkish Brand -Drum brakes 4 x 12 Ton axles -Axle Lifting: 1st axle automatic 4th axle manual lifting -Suspension (Type): Air Suspension -Steering Axles :- -King pin (Type) : 1 position with 1x coupling-pen 2” -Tires: 16+1 units, 245 / 70 R 17.5 -Rims: 16+1 units, 6.75 x 17.5 steel rims -Landing Gear: Mechanically operated by one side, two speed -Brake System: Wabco EBS (4S/3M) with RSS according to EC Directive with ADR Adaptation -Brake Chamber -2 axles with 4 units emergency brake chambers. -2 axles with 4 units service brake chambers. Electric system -24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA Brand -2 x Rear Stop Lights. - 4 x Side LED Lights -2 x White LED Lights - 2 x Front LED Lights -2 x Registration Plate Lights - 2 x rotating Lights Floor -Above tires and edges of platform are covered checkered sheet and hard wood -The middle surface is covered by flat sheet steel Rear loading ramps -Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable -push button for remote control -Folding type rear ramps length 2500 mm +1500 mm width 900 mm -Rear ramps are sliding internal and external hydraulic -Short steel ramps behind neck. Paint Application -Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint TECHNICAL SPECIFICATIONS ACCESSORIES -2 x 8 pcs of heavy duty lashing rings mounted on the outer frame mushroom type -4 x Certificated Expray mud flaps. -1 x Plastic water tank -2 x Wheel chocks and holders -2 x 8 Galvanized side extensions brackets 250 mm + 250 mm -2 x Side Protections, aluminum -1 x tool box. -1 x spare wheel carrier with 1 tire (on the gooseneck) -2 x manual support legs at the rear. -2 x Reflective tape and reflector sign at the rear and sides. -2 x side extension reflectors -Steel front panel(height:400mm) -Aluminum side panels on gooseneck section(height:400mm) -1 plaque places on rear ramps or bumpers = Further information = Curb weight: 13,000 kg CE marking: yes