Low loader semitrailer

FAYMONVILLE MAX Trailer MAX110 Semi-Tieflader

Condition: used, maximum load weight: 48,300 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, first registration: 03/2025, next inspection (TÜV): 07/2027, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Gooseneck with beveled front corners at approximately 45° and rear bevel of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approximately 30 mm thick. Loading platform with double extension and rear bevel of approximately 500 mm x 8°. 5 pairs of lashing rings that can be folded outwards (LC 5,000 daN). 4 pairs of lashing rings that can be folded outwards (LC 10,000 daN). 1 pair of lashing rings mounted horizontally at the front of the loading platform (LC 10,000 daN). 1 intermediate table approximately 250 mm wide. Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN). Hardwood flooring approximately 48 mm thick, with diamond plate flooring over the axles. Axles: BPW axles and suspension, all axles hydro-mechanically steered. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Tires: 245/70 R 17.5 3PMSF, load index (146/146 F). Kingpin: JOST kingpin (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking system: Complies with EU regulations, with EBS-E (4S3M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Steel construction: Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa). Electrical system: Complies with EU regulations. Lighting: 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connecting strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Includes the following additional equipment: 2-inch kingpin. A galvanized steel front bulkhead, approximately 400 mm high. Yellow-red air couplings on the galvanized front connecting strip. Tjdezqiitopfx Amgob 4 wheel chocks with holders on the front bulkhead. A spare wheel holder in front of the front bulkhead. Electro-hydraulic unit. Trailing steering at the front and rear, operable by cable remote control via push buttons, with single-axle control of the axles (without installation in the tractor unit). TPMS tire pressure monitoring system according to ECE R 14. Load gauge to determine the axle loads, including a load chart. Aluminum side walls and rear wall on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H). The rear galvanized plug-in profiles are removable (overall length approximately 2,560 mm). A galvanized toolbox, integrated in the beveled gooseneck. 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40' or 45' container. 7 pairs of profile pockets for plug-in profiles approximately 100 x 50 mm in the outer frame of the loading platform. Extensions, galvanized, extendable by approximately 230 mm on each side. Sliding attachment rails for aluminum loading ramps at the rear of the vehicle. 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear. Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load status. Central lubrication system with 2 BEKAMAX (Pico) pumps with normal grease NLGI-2, removable protective cover around the pumps. 2

Condition: new, functionality: fully functional, mileage: 10 km, power: 353.04 kW (480.00 HP), fuel type: diesel, tire condition: 100 %, axle configuration: 6x4, fuel tank capacity: 390 l, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2025, Equipment: ABS, additional headlights, air conditioning, cabin, crane, cruise control, differential lock, gripper hydraulics, hydraulics, low noise, onboard computer, parking heater, retarder, soot filter, tilting carriage, trailer coupling, MAN TGS 33.480 6x4 BB – with TN driver’s cab and auxiliary heater PALFINGER PK22002EH-D front crane MEILLER three-way tipper • New vehicle • Automatic transmission • ZF intarder • 480 hp • TN driver’s cab • Water auxiliary heater / stationary heater • Drive: 6x4 • Differential lock on driven rear axles • Emissions standard: EURO 6e • Air-suspended cab • Medium height design • Aluminum diesel tank • Driver-side access steps • Sun visor • 2 x air horns on cab roof • 2 x LED beacon lights on cab roof • 2 x rear-facing LED work lights on cab roof • 2 x LED strobe lights in front grille • 2 x LED strobe lights at rear of vehicle • 2 x LED work lights at rear • Comfort driver’s seat • Multifunction steering wheel • Cruise control • Navigation system • MAN EasyControl panel (4 functions, accessible when door open) • Automatic climate control • Slide-out refrigerator • Towing hitch with trailer equipment • Toolbox • 2 x storage boxes with folding lids by cab • MAN EasyStart roll-away protection • Wide front tyres PALFINGER PK22002EH-D front crane • 5 hydraulic extensions • Radio remote control • High seat with control desk • 180° hydraulically tiltable outriggers • Load hook • Support plates with holders Optional: • Clamshell bucket • Rotator • Rotator hook MEILLER three-way tipper • Internal dimensions: 4,800 x 2,450 x 800 mm • Container width • Double-wall steel sideboards • All sideboards foldable and swinging • Pneumatic pendulum locks on left and rear • Extendable ladder carrier in the front wall • Extendable box sections at rear for tailboard storage • Removable corner posts • 5 pairs of recessed lashing rings in bed floor • 4 lashing rings in front wall • Net hooks on sideboards • Coupling eye in front wall • Aluminium ladder with bracket • Folding underride guard Financing – Leasing / Hire Purchase / Rental – available! Todsxr Dckopfx Amgob

Condition: used, maximum load weight: 36,515 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 05/2027, Equipment: ABS, Excerpt from Equipment List: Gooseneck: Gooseneck with front corners angled approximately 45° and rear taper of approximately 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking approximately 30 mm thick. Extendable Loading Platform: Extendable loading platform with rear taper of approximately 1,000 mm x 8°. 5 pairs of lashing rings that fold outwards (LC 5,000 daN). 3 pairs of lashing rings that fold outwards (LC 10,000 daN). 1 pair of lashing rings lying horizontally at the front of the loading platform (LC 10,000 daN). Hardwood decking approximately 48 mm thick, with diamond plate decking over the axles. Axles: BPW axles and suspension, all axles with hydro-mechanical forced steering. Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve. Axle tool. Tires: Tires 245/70 R 17.5 3PMSF, load index (146/146 F) - manufacturer of our choice. Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load). Braking System: Braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit. Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer. A high-quality 2-component (2K) topcoat, solid color in RAL 3002 carmine red. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint is not possible. Todpfx Aozqiiaomgob Steel Structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Includes the following additional equipment: - 2-inch kingpin - One galvanized steel front wall, approximately 400 mm high. - Yellow-red air couplings on the galvanized connection bar at the front. - 4 wheel chocks with holder on the front wall (± 5kg) - One spare wheel holder in front of the front wall. - Electro-hydraulic unit (± 45kg) - Steering from the front and rear by means of a cable remote control with push buttons, with single-axle steering control (without installation in the tractor unit) - Mounting in the rear area of the gooseneck for aluminum loading ramps. - European reflector signs (red-yellow) on the rear of the trailer. - Yellow reflector tape according to EU regulations on the side, on the extendable section and at the rear of the trailer. - On the gooseneck and on the rear panel, one holder on the left and right for warning signs including socket. - One holder for a rotating beacon on the rear of the trailer. - Galvanized folding supports under the taper of the loading platform. - One mud flap on the rear of the trailer. - Manual and description on a USB stick. - Speed stickers 80 km/h on the rear and on both sides. - Load measuring device for determining the axle loads including load chart.

Condition: new, maximum load weight: 48,930 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * with beveled front corners, approximately 45° and with rear bevel approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) Tjdszlwm Aopfx Amgjb * Hardwood flooring, approximately 30 mm thick Loading platform * in a double-extendable design with rear bevel approximately 500 mm x 8° * 5 pairs of lashing rings, foldable outwards (LC 5,000 daN) * 4 pairs of lashing rings, foldable outwards (LC 10,000 daN) * 1 pair of lashing rings, horizontally at the front of the loading platform (LC 10,000 daN) * 1 intermediate table, approximately 250 mm * Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with diamond plate flooring over the axles Axles * BPW axles, hydro-mechanically forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tires * 245/70 R 17.5 3PMSF, load index (146/146 F) * TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with a 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * according to EU regulations with EBS-E (4S3M) Steel structure * made of high-strength fine-grained steel * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) * S690QL/S700MC (yield strength 690 MPa) Electrical system * according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting * Complete steel structure automatically blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 carmine red, according to the RAL 841GL system * Rims in silver. Rear part metallized and painted in RAL 9010 (pure white) * Metallic paint is not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Including the following additional equipment 2 inch kingpin * Electro-hydraulic unit (± 45 kg) * Follow-up steering from the front and rear, controllable by means of a cable remote control via push buttons, with single-axle control (without installation in the central control unit) * One bracket for warning signs on the left and right of the gooseneck and on the rear panel, including socket * One bracket for a rotating beacon on the rear of the trailer * Aluminum side panels and rear panel on the gooseneck, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized stake pockets are removable. (Length of the superstructure approximately 2,560 mm) (± 46 kg) * A tool box, galvanized, integrated into the beveled gooseneck (± 47 kg) * 4 pairs of WADER container pockets in the loading platform for a 20', 2x 20', 40 or a 45' container (± 40 kg) * 7 pairs of stake pocket for stake pockets approximately 100 x 50 mm in the outer frame of the loading platform (± 21 kg) * Extensions, galvanized

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 310 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, loading space length: 52,000 mm, loading space width: 24,200 mm, loading space height: 8,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, seat heater, soot filter, trailer coupling, - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Particulate filter - Radio/Multimedia system - Rotating beacon - Seat heating - Sun visor - Stability control - Toolbox - Windshield Internal number for customer inquiries: 6-036 MAN TGS 33.480 6x4 BL with tipper body (incl. hydraulic side walls) Three-way tipper with PALFINGER PK24001 SLD5 loading crane Vehicle: - MAN diesel engine, 353 kW (480 hp) power, 1,800 Nm torque, Euro 6e - MAN TipMatic 12.26 OD automatic transmission - MAN TipMatic Performance, Efficiency, and Offroad driving programs, up to 70,000 kg - 6x4 drive - Suspension: leaf spring/air - Differential locks on driven rear axles - 3,600 mm main wheelbase, 1,400 mm wheelbase between rear axles - 310 l fuel tank capacity, 60 l AdBlue tank capacity - Full brake assist - High-performance engine brake MAN EVBec, adjustable - Disc brakes on front axle, drum brakes on rear axles - Trailer coupling RINGFEDER Type 4040/G150A - Cab NN: the practical one (narrow, medium-length, normal height) - Tilting roof, mechanical - Driver comfort seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating - MAN EasyControl control panel, 4 functions, can be operated from outside when the door is open - Sunblind for front windshield, inside, electric - Cool box - MAN SmartSelect infotainment system with touchpad and direct access buttons - MAN Media System Navigation Advanced 7 inch - MAN Sound System Advanced - Navigation map Europe and Russia - Online traffic for navigation function - Standard extended warranty for the driveline for the 3rd year of operation up to 450,000 km, conditions apply, see maintenance record Body: - KH tipper body, three-way tipper body with loading crane mounted directly behind the cab Tedpozmhm Njfx Amgeb Tipper: - Dimensions L x W x H: 4,700 mm x 2,420 mm x 800 mm - Front wall 1,200 mm high Special equipment: - Rear corner pillars, fixed - Lifting aids for the side wall (passenger side) - Hydraulic side wall on the driver's side - Eight lashing eyes recessed in the floor on the left and right (4 per side) - Hydraulic system for crane/tipper/trailer switchable via valve in the cab - Folding rear underrun protection - Rear lights with protective grille - Access ladder on the driver's side - 2-circuit trailer tipping hydraulics - Support leg plates with stainless steel bracket Loading crane: - Palfinger PK 24.001 SLD5 - Lifting moment 226.5 kNm (23.1 mt) - Hydraulic 5-stage extension - Hose equipment for 2 additional devices = 5th & 6th control circuits (for example, a grapple) - Swivel range 400° with swivel angle detection - Electronic overload cut-off system, stability control system HPSC-E - Paltronic 40 - Scanreco - radio remote control with 6 functions with 3 joysticks (2-2-2) - LED work lights - Engine start / stop - RPM + / - Financing / hire purchase, as well as leasing / partial depreciation leasing is available with our leasing partner...

Condition: new, maximum load weight: 46,800 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory with vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Complete equipment list available upon request. Gooseneck * Gooseneck with beveled front corners at approximately 45° and a rear bevel of approximately 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approximately 30 mm thick Extendable platform * with rear bevel of approximately 1,000 mm x 8° * 5 pairs of lashing rings that fold outwards (LC 5,000 daN) * 3 pairs of lashing rings that fold outwards (LC 10,000 daN) * 1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) * Recesses in the outer frame of the platform for attaching tension straps (LC 2,000 daN) * Hardwood flooring, approximately 48 mm thick, with non-slip steel plate flooring over the axles Axles * BPW axles and suspension * 1st axle rigid, all other axles hydro-mechanically forced-steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Axle tool kit * Tires * 245/70 R 17.5 3PMSF * Load index (146/146 F) * TPMS: TPMS tire pressure monitoring system according to ECE R 141 Kingpin * JOST kingpins (mechanical) with 2-speed gearbox for approximately 24 t lifting capacity (approximately 50 t test load) Braking system * in accordance with EU regulations with EBS-E (4S3M) Paint finish * Complete steel construction automatically blasted with a blasting wheel system after welding Tsdpjzk S Dmjfx Amgsb * Second blasting with corundum for optimal adhesion of the coating system * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure the best corrosion protection * Final coating with 2 layers of 2K topcoat * solid color in RAL 3002 carmine red according to the RAL 841GL system * Rims in silver gray. Rear section metallized and painted in RAL 9010 (pure white) * Metallic paint not possible * Paint structure tested in the salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Steel construction * made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system * in accordance with EU regulations Lighting * 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the turn signal * ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets * Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Incl. the following additional equipment * 2-inch kingpin * One galvanized steel front wall, approximately 400 mm high * Electro-hydraulic unit (± 45kg) * Steering from the front and rear via cable remote control, operated via push buttons, with single-axle steering (without installation in the central beam) * 1 pair of recessed lashing rings along the central beam at the rear in the bevel (LC 10,000 daN) (± 3kg) * On the gooseneck, aluminum side boards and rear wall, pluggable, approximately 2,440 x 400 mm (L x H) * The rear galvanized plug-in stakes are removable. (Length of the structure approximately 2,560 mm) (± 46kg) * A galvanized toolbox, integrated in the beveled gooseneck (± 47kg) * 3 pairs of WADER container pockets in the platform for a 20' (30?) or a 40? container (± 30kg) * 6 pairs of stake pockets for plug-in stakes, approximately 100 x 50 mm, in the outer frame of the platform (± 18kg) * Extensions, galvanized, extendable by app

Condition: used, mileage: 220,000 km, power: 350 kW (475.87 HP), first registration: 04/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, total length: 10,800 mm, total height: 3,900 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, compressor, crane, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Actros 2848 6x2 Kroll 14.5m³ Water Recycling Truck First registered: 04.2017 Mileage: approx. 220,018 km Engine: 350 kW / Displacement: 12809 ccm / EURO 6 (OM471) Transmission: Automatic + PTO (G 281-12/14,93-1.0) Suspension: Leaf / Air Wheelbase: 4600 mm Length: 10800 mm / Height: 3900 mm Weight variant (28.0 t) Axle loads: 9,000 kg + 11,500 kg + 9,000 kg L-cab: StreamSpace 2.50m + large seating area/sofa and 2 sleeping berths Approved as self-propelled working machine Tires: 385/55R22.5 + 315/60R22.5 + 385/55R22.5 TÜV (technical inspection): 09.2026 Other: Air conditioning, automatic climate control, auxiliary heater, multifunction steering wheel, multifunction display (large), driver's air-suspended seat, sound system, refrigerator, bi-xenon headlights, fog lights, LED daytime running lights, cornering lights, illuminated Mercedes star, lane keeping assist, cruise control, distance keeping assist, high-performance engine brake, 500-liter fuel tank, and more. Superstructure: Kroll 14.5m³ Water Recycling Truck, suction and pressure HD combination, recycling WRG Type: K 1.0 ? 2.6 ? 11.0 / 29 P Total volume: 10,500-liter tank + side water tanks 2 x 1,300 liters total = 2,600 liters Divided by extension piston with 2 locking mechanisms Piston position 1 = 5.4 m³ + 8.2 m³ water/sludge (with water tanks) Piston position 2 = 7.1 m³ + 6.5 m³ water/sludge (with water tanks) SIMULTAN telescopic boom with suction hose reel DN 125 for approx. 25 meters + transport reel for suction hose DN 75 for approx. 60 meters + large lighting package (ambient lighting + illuminated tool cabinets) + electric winch Vacuum pump: Demag-Wittig AquaStar AL 2700 L Approx. 2700 m³/h HD pump: URACA P3-45 G70 Tjdpfx Aezf Tdwjmgsb Approx. 484 liters/min at 150 bar Year of construction: 2023 Large HD reel DN 32 for approx. 300 meters (plastic) with meter counter Small HD reel: DN 13 for approx. 120 meters (plastic) Water recycling: Manufacturer: Caprari Type: Mec-AZ2/65 B Approx. 570 liters / min Further special equipment, data or pictures on request!!! Information without guarantee / subject to errors! Information provided on the internet are non-binding descriptions and do not constitute guaranteed properties. The seller is not liable for errors, input errors and data transmission errors. Subject to change. Continuous purchase and sale, as well as trade-in and rental of municipal technology / disposal and cleaning vehicles for sewer cleaning and disposal of wet and hazardous goods.

Condition: used, mileage: 20,000 km, power: 335 kW (455.47 HP), first registration: 07/2025, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #511 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure cleaning and suction-pressure tank superstructure ADR Type K 14.0 / 28 PE Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material: S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Telescopic piston with 3 locking positions * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible—"comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * EMPTYING: via pneumatically-actuated piston * SLUDGE WATER DRAIN DN 80: for pushing the dirty water back through the boom into the sewer. Vacuum system CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 Tsdpfxsxc Szij Amgeb * Parallel guidance suction and high-pressure hose via boom * Suction hose reel hydraulic right-side with 30 m DN 75 (can be fully suctioned through) High pressure system Uraca KD 718 approx. 315 l/min at 170 bar * Large HD hose reel for 240 m 1" DN 25, 180° pivotable * Equipped with 160 m DN25 * Small HD hose reel for 80 m DN 13 hydraulically operated * Equipped with 80 m DN13 Special features hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height of suction hose hydraulically via roller guide carriage * Extension arm for suction hose hydraulically and telescopically extendable and 180° pivotable * ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED area lighting * Remote operation of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing unit (heated) * Large cupboard rear left, e.g. for push camera * Reversing camera with 7'' color monitor incl. day/night mode * Noise protection panel in front of pump room * Large tool compartment * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising boards on right and left Special equipment: Chassis cover, axle load measuring system, front axle load 9.0 t, airbag driver's side, 220 Ah battery, battery master switch, standard and DuoMatic brake connectors, interactive multimedia cockpit, air pressure horn, electrical pre-wiring in cab 24V / 100A, driver assist system: high beam assistant and cornering light, driver assist system: traffic sign recognition, suspension: front springs 9.0 t, 4-leaf, tinted windshield with band filter, hazardous goods version ADR type FL, generator 150 A, speed limiter, gearbox 16-speed - type: G 280-16, rear axle crown wheel 300, cab air filter for construction vehicles, 3-piece mudguards, 3-piece mudguards with splash protection, fuel tank: 330 L aluminum left side, cooling system for hot climates, trailing axle 9 t steered, loadable, liftable, navigation system, PTO - flange splined, PTO gearbox-independent and clutch-dependent MB 1.65, parameterizable special module, chassis lowering without residual air pressure regulation, chassis overhang 1350 mm, smoker's package, rain sensor, tire pressure monitoring system, acoustic reverse warning and warning flash light (external warning signal) For further detailed information and/or images, please contact us directly. You can find a wide selection of more vehicles for SALE or RENT at: Changes, prior sale and

Condition: excellent (used), mileage: 38,973 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, wheelbase: 5,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,270 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 2021, Equipment: ABS, EBS, cruise control, trailer coupling, = Additional options and accessories = - Air suspension system - Electrically adjustable seats - Gullet - Power take-off (PTO) - Speed limiter - Steering wheel audio controls - Sun visor = Remarks = Drivetrain PTO: 1739 uur Superstructure Construction year: 2021 2021 MAN TGS 28/470 in absolute top condition with only 39,000 km. This one is configured as a sewer cleaner and has the following specification: Brand: Kroll Type: Combination gully cleaner Model:K14.0/28p Total capacity: 14,000 liters Adjustable partition with 3 positions Water tank position, Sludge tank: 1. 3300 liters, L10600, 2. 5300L 8600, 3. 7300, 6600L Large high-pressure hose reel behind 180m DN 25 HD hose Small high-pressure hose reel behind 60m DN 13 HD hose Suction hose storage cassette with 180-degree telescopic arm High-pressure water gun Sound-insulating panels left and right Remote control High-pressure water pump Brand: Uraca Model: KD718 Capacity 315 liters per minute at 170 bar Vacuum pump Brand: CVS Model: Vacustart 1600 Capacity: 1600 m³ per hour Dutch machine in top condition! = More information = General information Number of doors: 2 Registration number: 60-BRN-8 Technical information Tsdpfx Ajzuc Rromgeb Number of cylinders: 6 Engine capacity: 12.419 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 17.659 kg Carrying capacity: 10.441 kg GVW: 28.000 kg Functional Make of bodywork: Kroll K14.0/28P Water tank: Yes Maintenance APK (MOT): tested until 06/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Number of hand transmitters: 1 Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: new, maximum load weight: 9,500 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 350 mm, total length: 7,160 mm, total width: 2,550 mm, total height: 3,250 mm, Year of construction: 2026, Equipment: ABS, * Body and chassis galvanized * Low design, loading platform between the wheels * One-piece, sliding spring ramps, 2,400 x 540 mm, steel, hot-dip galvanized * Ramp surface made of grating, hot-dip galvanized * Permissible total weight 11,900 kg (or 10,500 kg) * Payload 9,350 kg (8,000 kg) * 2 pairs of lashing rings at 6,000 kg each * 6 pairs of lashing rings at 2,000 kg each Tjdpfx Amjzrq Akjgeb * Loading height 700 mm * Loading area dimensions: 5,000 x 2,010 x 350 mm * Infinitely adjustable drawbar * Reinforced 12 t geared winch with load and fast-running mode * 40 mm spruce wood floor * 2 folding supports at the rear * Parabolic suspension * ABS Price ex works Gersthofen Additional cost for delivery from Bernkastel-Kues: €500 + VAT Additional cost for insertable rear wall: €108 + VAT