Lowbed semitrailer for transportation of construction machinery

Recker semirimorchio culla vasca allungabile

Condition: used, functionality: fully functional, empty load weight: 13,000 kg, maximum load weight: 37,100 kg, overall weight: 50,100 kg, axle configuration: 3 axles, first registration: 07/1995, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: blue, Year of construction: 1995, Equipment: ABS, de angelis extendable cradle trailer, year 1995, payload up to 37 tons, 3 axles with pneumatic suspension, abs, 2nd and 3rd steering axle, extendable chassis with additional 3.50m central extension, 5.0m closed cradle, height from ground 44cm, removable headroom above axles, manual rear ramps, good condition, INTERDRIVE SRL-PARMA DEALER Lrjdpswa T T Rofx Ahrer

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,700 mm, loading space width: 2,540 mm, loading space height: 890 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, approx. 3,700 mm long, rear end with chamfer approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Loading Deck: - Loading deck, approx. 9,700 mm long with hydraulically folding and lowering rear section, plus hydraulically liftable front section for driving onto the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manual switch - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF, twin tyres - TPMS tyre pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electrohydraulic auxiliary steering for self-steering axle of 3-axle assembly - Automatic control of the self-steering axle when reversing using a gyroscope sensor - Manual control for steering in forwards and reverse, via separate radio remote control - Manual operation enabled up to 10 km/h - System supplied via a separate electro-hydraulic unit Included Accessories: - Removable steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit - Outer beams on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then every 400 mm - One mounting hole in the upper rear area of the outer beams for a bolted lashing ring - On the gooseneck and rear chamfer: grating floor with 5 mm steel reinforcement - 2" kingpin - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - Round NATO socket on the front interface (Maeler & Kaege VG 96 917) - On the gooseneck: 1 pair of removable ALU sidewalls, approx. 400 mm high, anodized - 4 wheel chocks - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Wire rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - Winch mounted front inside the gooseneck - Continuous grating floor with 5 mm steel plate reinforcement for additional strength, designed for point load: - on the lift bed - on the loading deck - on the hydraulically lowerable rear section - Painted sand coating on the gooseneck cover plates and in the transition areas between neck and lift bed, lift bed and loading deck, and loading deck and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, load capacity in raised position while driving: 9,000 kg - Hydraulic cylinders equipped with load-holding valves Lrodjyw Sakspfx Ahror - Cut-outs in the outer frame of the loading deck and lift bed for inserting tensioning straps - Extensive lashing points - Hydraulic rear section lowerable for loading/unloading and liftable for reducing overall length - Load capacity when horizontal while driving: 10,000 kg - Reduction of overall length when raised: 2,350 mm - Painted sand coating on the complete ramp except extendable galvanized part - Hydraulically extendable rear extensions for loading/unloading - Radio remote control: - Operation of the hydraulic lift bed - Operation of the hydraulic lift of the rear extension - Operation of the hydraulic extension of the rear extension - 1st axle with starting aid - Central lubrication system with 1 pump - 4 extendable warning panels, approx. 423 x 423 mm

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 05/2011, loading space length: 13,550 mm, loading space width: 2,540 mm, loading space height: 910 mm, total length: 13,550 mm, total width: 2,540 mm, total height: 910 mm, suspension: air, wheelbase: 10,410 mm, Year of construction: 2011, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Nooteboom Gooseneck trailer, 18,000 kg 4 axles, 10,000 kg each Unladen weight: 12,120 kg Payload: 45,880 kg!!! Axles 1 and 2: fixed Axles 3 and 4: self-steering Double hydraulic ramps (5 m) MOT (periodic technical inspection) valid until 02/2027 Special trailer for heavy-duty transport! Low unladen weight and high payload. = Further Information = Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Max. axle load: 10,000 kg Rear axle 2: Twin tires; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 12,120 kg Payload: 45,880 kg GVWR (Gross Vehicle Weight Rating): 58,000 kg Functional Ljdpfx Ahszq Dphererr Loading platform height: 90 cm Maintenance MOT (periodic technical inspection): valid until 02.2027 Condition Technical condition: very good Optical condition: good Damage: none Financial Information Price: Upon request Product Safety Manufacturer: Nooteboom NL Further Information Please contact David F Middelman for further information.