Low loader trailer

SCHWARZMÜLLER Tieflader mit gekröpftem Plateau

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Hfsdpjy Aug Rofx Ah Sjh Weights: * Gross vehicle weight (permissible): 24 t * Gross vehicle weight (technical): 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, beveled corners approx. 5,350 mm = lowbed platform – flat loading area approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or with extensions approx. 3,000 mm) * Loaded loading height approx. 870 mm * When assembling trains, the legally permissible overall height and total train length must be observed! Chassis: * Steel welded construction with front gooseneck and rear bevel * Ramp slope with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the lowbed, 1x on the raised platform) * 7 pairs of recessed, retractable approx. 10 t lashing rings (4x in the lowbed, 1x on the ramp slope, 2x on the raised platform) * Standard ball-bearing turntable Chassis attachments: * Lowbed platform can be extended on both sides with approx. 50 mm softwood boards (track width of machines to be transported must not exceed the external frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform between the longitudinal beams, 1 pair at the very back in the bucket recess left and right, 1 pair at the front on the raised platform in front of the gooseneck between the longitudinal beams, 1 pair at the rear of the lowbed in front of the ramp slope in the bucket recess left and right Drawbar: * Fixed drawbar with swivel eye approx. 40 + 50 mm, cranked design, silent bushing mounting, drawbar retaining spring with tensioner * Truck coupling height from approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support system: * 2 automatic folding supports at the rear Axles: * SAF air suspension low-bed axles with drum brakes, axle load capacity 11 t/axle, S-cam brake approx. 300/200 mm, automatic brake adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand according to manufacturer’s selection Brake system/Suspension: * Brake system compliant with ECE regulation R13 * Dual-line compressed air brake system * Wabco make, EBS system 4S3M, sensors on 1st and 2nd axle * RSS/RSP – stability program * Spring-actuated parking brake on 2nd and 3rd axle * Brake/air connection lines with 2 individual couplings (yellow/red) * EBS/ABS connection cable * Air suspension with lift and lower function (rear axles only), automatic ride height adjustment from 15 km/h (RTR), with axle stop on front axle Assistance/Safety systems: * SWIT – Schwarzmüller Intelligent Telematics * Axle load display via EBS Canbus signal for display in the cab (truck must be properly prepared; not a calibrated scale) * Tire pressure monitoring according to ECE regulation 141, with pressure sensor in the wheels, for display in cab (display must be present in tractor unit) Flooring: * Approx. 50 mm impregnated softwood floor, protruding approx. 5–10 mm above the top of the frame * Steel chequer plate cover above the wheels Ramps: * 2 foldable, single-piece lightweight steel loading ramps, length approx. 2,800 mm, width approx. 750 mm, with approx. 35 mm impregnated hardwood floor * Ramps adjustable

Condition: new, maximum load weight: 30,860 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available upon request. Chassis: Hfjdpfxoy Auhne Ah Ssh * Steel welded construction with front neck, front corners chamfered and rear taper, drive-on ramp with central excavator bucket recess = depression at the rear between the longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 4 pairs of approx. 4 t lashing brackets, 7 pairs of recessed retractable approx. 10 t lashing rings (2x on the raised platform, 1x in the front neck slope, 3x in the low bed between the wheel recesses, and 1x in the entry ramp) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located in front after the neck with one-piece drive-over aluminium cover, for max. surface load approx. 11,650 daN/piece * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), between the 3rd and 4th axle with one-piece drive-over aluminium cover, suitable for the transport of wheel loaders with wheelbase approx. 2,700 - 3,600 mm and wheel diameter approx. 1,485 - 1,740 mm, maximum rear wheel loader overhang 2,220 mm * Width between the wheel recesses approx. 1,255 mm (outer/outer longitudinal beams) Chassis attachments: * 5 pairs of stake pockets in the outer frame for box section posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised platform) * Extensions with softwood planks approx. 50 mm, extendable on both sides of the low bed platform (the track width of the construction machines to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of foldable approx. 10 t lashing rings, distribution: 1 pair front on the raised platform, inside the longitudinal beams, 1 pair fully at the rear in the excavator bucket recess left and right, 1 pair front on the raised platform before the neck, inside the longitudinal beams, 1 pair rear in the low bed before the drive-on slope, in the excavator bucket recess left and right Drawgear: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, with silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 775 mm to 975 mm * Drawbar length approx. 1,800 mm Support equipment: * 2 hydraulic rear supports - operated individually, controls installed in separate stainless steel box underneath Axles: * SAF air-suspended low loader axles with drum brakes, load capacity approx. 11 t/axle, S-cam brake approx. 300/200 mm, automatic slack adjusters Wheels: * 16 tyres 245/70 R 17.5, 146/146F, make Conti HTR2 (tyre load capacity approx. 12 t / axle) Brake system/Suspension: * Brake system per ECE directive R13, dual-line pneumatic brake system * Brake system make Wabco EBS system 4S3M, 1st + 3rd axles with sensors * RSS/RSP – stability program * Spring-actuated parking brake on 3rd + 4th axle * Aluminium air tanks for gross weight 44 t * Brake/air connection lines with 2 single coupling heads yellow/red * EBS/ABS connection cable * Tensioning rubber as holder for EBS and electrical plug * Air suspension with lift/lowering facility, operated separately front and rear * Automatic leveling to programmed driving height from 15 km/h Assistance/Safety systems: * SWIT - Schwarzmüller Intelligent Telematics Floor: * Softwood floor approx. 50 mm, impregnated, protruding approx. 5 - 10 mm above frame upper edge * Steel chequer plate cover over rear wheels