Car carrier van

Scania LB81

Condition: used, mileage: 560,004 km, first registration: 10/1980, Year of construction: 1980, Please contact Klaas Gerrits, Peter Gerrits, or Mr. Gerrits for further information. Gkelhcdezc E Rrow Njb

Condition: new, functionality: fully functional, empty load weight: 990 kg, maximum load weight: 2,510 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,620 mm, loading space width: 1,950 mm, loading space height: 350 mm, suspension: parabolic leaf (spring), tire size: 185/70R13C, trailer brake: trailer braked, Year of construction: 2025, Ifor Williams TT3621 ► Rear tipper with a large tipping angle ► Platform size: approx. 362x195x35 cm (LxWxH) ► Permissible total weight: 3500 kg ► Unladen weight: approx. 990 kg Gkjlhsxc I Urecdw Nsb ► 12 V electric hydraulic pump with dedicated battery ► Battery recharging via towing vehicle ► Full aluminium bed ► Tailgate can be opened at both top and bottom ► Max. tipping angle: 50° ► Full-size spare wheel Extras: ► Light guard mesh ► 8 x lashing rings, each 800 kg ► Ramp holders ► Aluminium ramps – pair load capacity: 3000 kg ► Tyres with off-road profile – 185/70R13C ► Lockable toolbox

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide Golhcek Af Svjdw Nskb -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, mileage: 325,000 km, Year of construction: 2004, Year of manufacture: 2004 Gkolhcdwjzibmzs Neb

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Gjlhel Sl Izecdw Njkb Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: used, mileage: 260,451 km, power: 141 kW (191.71 HP), first registration: 04/1980, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Equipment: crane, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! * Crane truck/mobile crane * Year of manufacture 1980 * MKG crane works perfectly and everything is sealed * Support legs work and are also sealed * Tires still have approx. 60% tread Goljtpr Sgshcdw Nekb * Engine and transmission also OK! * Crane height up to 30 meters!!! Our services: - Fresh TÜV+ASU - Delivery throughout Germany - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment We look forward to seeing you!

Condition: used, Year of construction: 2004, operating hours: 10,021 h, Information in English: Manufacturer: Liebherr Type: LTM 1030-2 Year of manufacture: 2004 Fuel: Diesel Chassis number: W092625004EL05333 Mileage: 48,393 km Crane hours: 15,285 h Superstructure hours: 11,021 Lifting capacity: 30,000 kg Maximum boom length: 30 m Jib: 9 - 14 m Boom sections: 3 Number of hook blocks: 1 Number of winches: 1 Driving speed: 70 km/h Number of axles: 2 Drive/Steering: 4x4x4 Tire manufacturer/size: Michelin / 445/95 R 25 Tire condition: 75% Gearbox type: Automatic Engine manufacturer/type: Mercedes-Benz / OM906LA Capacity in kW: 205 Capacity in HP: 280 We can arrange worldwide shipping. Gjlhcdwjy Dzate Nokb FOR OUR FULL STOCK, CHECK OUR WEBSITE: Additional information: * Payload: 30,000 kg Tony Trucks B.V. | More photos on Contact | Michel Kurt | Tel: | WhatsApp: | Email: Tony | Tel: | WhatsApp: Export costs | Please contact us for the rates to your country. Location | Bergschenhoek (NL) | 130 km from the German border | 10 km from Rotterdam The Hague Airport Disclaimer: Prices and availability subject to change without notice. The stated prices exclude BPM (Dutch vehicle tax) and are only valid for export.

Condition: used, machine/vehicle number: 053, mileage: 270,950 km, first registration: 06/2016, color: white, gearing type: automatic, emission class: euro6, IVECO 100E21, Year 2016, White color, Euro 6, 3105 wheelbase, km 270,950, ZF automatic transmission, differential lock, air conditioning, PTO, new tires, like new, with 10 Ton BOB Italev unloader system, hydraulic box lock, hydraulic upright roller Gjlhjpahmlscdw Nokb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: YV2ASW0G99A684509, mileage: 442,321 km, first registration: 05/2009, fuel type: diesel, empty load weight: 23,965 kg, maximum load weight: 20,035 kg, overall weight: 44,000 kg, tire size: 315/80R22,5, tire condition: 50 %, axle configuration: 8x4, wheelbase: 3,206 mm, axle spacing: 3,206 mm, fuel: diesel, brakes: other, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: parabolic leaf (spring), number of seats: 2, Year of construction: 2009, Equipment: ABS, AdBlue, air conditioning, airbag, car registration, crane, cruise control, differential lock, electric window regulation, fog lights, onboard computer, power assisted steering, tachograph, traction control, trailer coupling, truck registration, Vehicle with HDS superstructure PALFINGER PK60002 Performance + PJ170 19.5 tons lifting capacity 5 + 4 sections + rotary rotator HDS has undergone thorough servicing Gjlhcdoym U Iujw Nskb New brake linings on all axles Vehicle ready for operation Insurance valid until July 2026 Inspection valid until February 2027

Condition: used, mileage: 342,000 km, power: 240 kW (326.31 HP), first registration: 08/2011, fuel type: diesel, empty load weight: 10,950 kg, maximum load weight: 7,050 kg, overall weight: 18,000 kg, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 5,100 mm, brakes: engine braking, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,200 mm, total width: 2,550 mm, total height: 3,650 mm, loading space length: 6,100 mm, loading space width: 2,470 mm, loading space height: 950 mm, Equipment: ABS, additional headlights, air conditioning, cabin, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. Features: 1 comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio/CD player, cruise control, Telligent transmission, 16-speed gearbox, ABS (anti-lock braking system), traction control system (ASR), constant throttle, auxiliary drive, front exhaust, differential lock, fog lights, work lights, tool box, leaf-air suspension, trailer hitch with air and light connections, aluminum fuel tank, low-noise G1, tie-down points, underbody protection, side aluminum fender, hinged flaps, roof hatch, crane at the rear, emergency stop, gripper control, elevated seat, 2-point hydraulic support, 2 hydraulic extensions, green environmental badge. Gelhcdwovhhw Uo Nskb Wheelbase: 5100 mm. Body: Platform body with rear crane Hiab XS 133 K-2 Pro, elevated seat, 7.5t front axle, H6 13t rear axle, 440 ring gear, disc brakes on front and rear axles, Telligent braking system with ABS and ASR, front underrun protection, parameterized special module (PSM), pre-equipment for toll collection, comfort cockpit, pollen filter, Telligent transmission, On-Board Diagnostics 2, reinforced clutch, fuel tank capacity: 300l, transmission oil cooler, tractor unit package, auxiliary drive MB 124-10c MPA n-/m speed. Load chart: 3.7m-3700kg, 4.7m-3000kg, 7.1m-1960kg, 9.6m-1440kg. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!