Flatbed truck

Mercedes-Benz Axor 1833 L 4x2 mit Heckkran Hiab XS 133 K-2

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Hsdpok Af Svefx Ap Hsfl Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: used, machine/vehicle number: WDB9506042L758582, mileage: 250,500 km, power: 213 kW (289.60 HP), first registration: 01/2013, tire size: 315/80 R22.5, axle configuration: 6x2, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro5, suspension: steel-air, total length: 10,200 mm, total width: 2,550 mm, total height: 3,750 mm, loading space length: 6,350 mm, loading space width: 2,500 mm, loading space height: 700 mm, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - Sper = Remarks = Cabin Right hand drive: ✓ Chassis Chassis height: 100 cm Wheelbase: 490 cm (1-2) 135 cm (2-3) Fuel tank capacity: 350 L Structure Open box: ✓ Tank Fuel: ✓ Crane Number of hydraulic extensions: 2 Number of support legs: 2 Remote control: ✓ Rotator: ✓ Squeeze Box: ✓ Maximum crane load capacity : 1325 kg Maximum crane reach: 7.90m NON-DUTY FREE, REQUIRES CUSTOMS CLEARANCE // RIGHT-HAND DRIVE // Fassi F110 A.0.22 loading crane with grappler and rotator, Year of construction 2013, 2 Hydraulic extensions, 2 Support legs, Radio control, Max reach 7.90 M, Max Loading capacities 1325 kg at 7.90M, Platform dimensions 635x250x70 cm, Load height 130 cm // Truck 6x2, Euro 5, Adblue, Manual gearbox with 8 gears, Diff. lock, Steel front suspension, Air rear suspension, 3rd axle lift axle, Day cabin, Airconditioning, RIGHT-HAND-DRIVE, Digital tachograph, Shipment dimensions 1020x255x375 cm = More information = Axle configuration Tyre size: 315/80 R22.5 Axle 1: Steering; Tyre profile left: 70%; Tyre profile right: 75%; Suspension: leaf suspension Axle 2: Double wheels; Tyre profile left outer: 65%; Tyre profile right outer: 50%; Suspension: air suspension Axle 3: Lift axle; Tyre profile left: 60%; Tyre profile right: 60%; Suspension: air suspension Weights Empty weight: 11.240 kg Carrying capacity: 13.760 kg GVW: 25.000 kg Hfodpfju H H Rnjx Ap Hjl Functional Crane: Fassi F110, year of manufacture 2013, on rear of chassis Height of cargo floor: 130 cm Identification Registration number: PJ13CVH = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Hodpfol Sl Izjx Ap Hsfl Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: excellent (used), mileage: 227,937 km, power: 331 kW (450.03 HP), first registration: 02/2015, fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2015, Equipment: crane, = Additional options and accessories = - PTO = Further information = Unladen weight: 21,255 kg Payload: 15,745 kg GVW: 37,000 kg Crane: HMF 5020 Hsdsutv N Eopfx Ap Hjfl Technical condition: very good Optical condition: very good

Condition: used, mileage: 260,451 km, power: 141 kW (191.71 HP), first registration: 04/1980, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Equipment: crane, Hello! We are pleased to welcome you. We are offering you the vehicle with the following equipment: Please be sure to leave us your telephone number in your message! * Crane truck/mobile crane * Year of manufacture 1980 * MKG crane works perfectly and everything is sealed * Support legs work and are also sealed * Tires still have approx. 60% tread * Engine and transmission also OK! * Crane height up to 30 meters!!! Our services: - Fresh TÜV+ASU - Delivery throughout Germany - Test drive possible at any time - Attractive financing conditions - Vehicle trade-in Opening hours also on Sundays by appointment We look forward to seeing you! Hfedpfx Astpr Sgsp Hel

Condition: used, mileage: 257,976 km, power: 240 kW (326.31 HP), first registration: 01/2011, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 2,920 mm, loading space length: 4,300 mm, loading space width: 2,440 mm, loading space height: 600 mm, Equipment: ABS, crane, electronic stability program (ESP), soot filter, Mercedes-Benz 1833 Axor 2-way tipper + PK 10500 building materials crane 4x2 Suspension: leaf-leaf Wheelbase: 3.90 m PALFINGER crane Hfjdpjq Hy Tyefx Ap Hol Type: PK 10500 2x hydraulic extension 2x hydraulic support points 2-way tipper Length: 4.30 m Width: 2.44 m Height: 0.60 m Equipment: - Engine brake - Digital speedometer - Radio-CD-Aux - Electric window lifter - Hill start assist - Sunroof We are also happy to support you in the area of financing/leasing with our partners. All information without guarantee. Errors and intermediate trade reserved.

Condition: used, mileage: 107,000 km, Year of construction: 1999, Year of construction: 1999 Hedpfsy Ny Aqex Ap Hsfl

Condition: used, Year of construction: 2004, operating hours: 10,021 h, Information in English: Manufacturer: Liebherr Type: LTM 1030-2 Year of manufacture: 2004 Fuel: Diesel Chassis number: W092625004EL05333 Mileage: 48,393 km Crane hours: 15,285 h Hfjdpfx Apjy Dzato Hjl Superstructure hours: 11,021 Lifting capacity: 30,000 kg Maximum boom length: 30 m Jib: 9 - 14 m Boom sections: 3 Number of hook blocks: 1 Number of winches: 1 Driving speed: 70 km/h Number of axles: 2 Drive/Steering: 4x4x4 Tire manufacturer/size: Michelin / 445/95 R 25 Tire condition: 75% Gearbox type: Automatic Engine manufacturer/type: Mercedes-Benz / OM906LA Capacity in kW: 205 Capacity in HP: 280 We can arrange worldwide shipping. FOR OUR FULL STOCK, CHECK OUR WEBSITE: Additional information: * Payload: 30,000 kg Tony Trucks B.V. | More photos on Contact | Michel Kurt | Tel: | WhatsApp: | Email: Tony | Tel: | WhatsApp: Export costs | Please contact us for the rates to your country. Location | Bergschenhoek (NL) | 130 km from the German border | 10 km from Rotterdam The Hague Airport Disclaimer: Prices and availability subject to change without notice. The stated prices exclude BPM (Dutch vehicle tax) and are only valid for export.

Condition: used, mileage: 753,000 km, power: 206 kW (280.08 HP), first registration: 11/2000, fuel type: diesel, overall weight: 19,000 kg, gearing type: mechanical, emission class: euro2, Equipment: ABS, crane, Atego 1828 6-speed split gearbox Tipper with aluminium side walls Hiab 102 crane 2x hydraulically extendable with rotator Leaf suspension front and rear French registration Good condition Price: €18,750 net Hjdpfx Aswximwop Hofl

Condition: used, mileage: 443,865 km, power: 205 kW (278.72 HP), first registration: 11/2006, fuel type: diesel, empty load weight: 9,710 kg, maximum load weight: 8,290 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: air, number of seats: 2, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, cabin, crane, cruise control, differential lock, immobilizer system, low noise, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Kz. House, 1x comfort seat, rear window, electric mirror, electric window left, electric window right, radio, cruise control, switch 8, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, front exhaust, differential lock, work lights, storage box, air suspension, low-noise G1, lashing eyes, U-protection, swivel drop sides, roof hatch, crane behind house, emergency stop, foldable, 2-point hydraulic outrigger, 2x hydr. extensions, yellow environmental sticker Hsdpfxevhhxls Ap Hofl Wheelbase: 5700 mm Body: platform body with crane Palfinger PK9501-A, radio control 7.5t front axle, rear axle H6 13t disc wheel 440, disc brakes on front and rear axle, Telligent brake system with ABS and ASR, front underride guard, parameterizable special module (PSM), long-distance cockpit, pollen filter, Telligent maintenance system, tank capacity: 210l, auxiliary drive countershaft MB 131-2. Load diagram: 3.6m-2400kg, 5.5m-1560kg, 7.4m-1140kg. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .