Chain excavator

KOMATSU PC290NLC*Klima*Löffel*Ketten

Condition: new, machine/vehicle number: 1, empty load weight: 11,000 kg, maximum load weight: 28,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 870 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2020, Equipment: ABS, New Ceylon semi-trailer, ready for registration. Features include: 3 axles, with the first axle liftable and the third axle steering; EBS; double-sided electro-hydraulic ramps; extendable sides; winch preparation; low-level height of 87 cm; length of 9.95 m; overall length of 13.65 m; and Rud couplings. Immediate delivery, subject to availability. Guaranteed. CONCESSIONARIO INTERDRIVE SRL - PARMA. Predpfx Apjh S Aw Re Dea

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood deck, 30 mm thick Loading platform: -Telescoping loading platform with rear slope of approx. 1,000 mm x 8° -1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widening in the lower area -Between the 1st and 2nd axles, a pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm -3-part removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 tons / piece -Recess in the slope and extending into the loading platform to accommodate the excavator arm, approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying at the front in the loading platform (LC 10,000 daN) -5 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) -Cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) One-piece aluminum ramps: -A pair of one-piece aluminum ramps, approx. 2,500 x 600 mm -Ramp with spring lift mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: Psdpfeiu Er Ajx Ap Dsra -BPW axles and suspension, 2 axles rigid, 1 axle steered -Technical axle load: 12,000 kg -Electromagnetic reversing lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Axle tool -Tires 235/75 R 17.5 -TPMS tire pressure monitoring system according to ECE R 141 Included accessories: -One spare wheel with holder in front of the front wall -2" kingpin -One galvanized steel front wall, approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of wheel chocks with holder on the front wall -Mounting in the rear area of the gooseneck for aluminum ramps -Widening, galvanized, extendable by approx. 230 mm on each side -Galvanized folding supports under the slope of the loading platform -One mounting for a rotating beacon on the rear of the trailer -White reflector tape according to EU regulations on the side, on the extension and red at the rear -On the gooseneck and on the rear panel, one mounting each on the left and right for warning signs including socket -On the gooseneck, aluminum side and rear panels that can be plugged in, approx. 2,440 x 400 mm -The rear galvanized slotting strips are removable (length of the structure approx. 2,560 mm) -2 pairs of WADER container pockets in the loading platform for a 20ft or 30ft container -3 pairs of rung pockets for slotting strips 100 x 50 mm in the outer frame of the loading platform -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing strips 20 x 20 mm every 200 mm on the outer frame of the slope of the loading platform -A sand coating is applied to the diamond-patterned plates on the gooseneck and on the loading platform for slip resistance -Four warning signs, each extendable by approx. 400 mm, approx. 423 x 423 mm, with a position light -On the warning signs, a mounting for a rotating beacon -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel structure shot blasted, then the defined visible sur

Condition: good (used), functionality: fully functional, Year of construction: 1999, operating hours: 11,000 h, BULLDOZER CATERPILLAR D 5 M LGP YEAR 1999 11,000 HOURS Prsdpfexxal Uex Ap Dea RIPPER TILT BLADE

Condition: used, Year of construction: 2012, operating hours: 4,499 h, Equipment: all wheel drive, Vehicle number 12110 Errors and prior sale excepted. Prodpfey T Ulhex Ap Doa

Condition: new, machine/vehicle number: PA1268-N1, New long reach boom, suitable for KOMATSU PC 200 - 240, -6, -7, -8 and others, length 55 feet (approx. 16.76 m), including new heavy-duty digging bucket with teeth, width approx. 970 mm Pedpfx Aorhi Sdjp Dora PA1268 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops! The machine may be supplied with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this machine. Please contact us!

Condition: ready for operation (used), functionality: fully functional, overall weight: 24,000 kg, mast type: mono, Year of construction: 2010, operating hours: 9,993 h, Equipment: cabin, standard shovel, TRACKED EXCAVATOR VOLVO EC 240 NLC Predoztqn Aepfx Ap Dea YEAR 2010 9993 HOURS 3 BUCKETS BRH LINE

Condition: used, functionality: fully functional, power: 22.5 kW (30.59 HP), fuel type: diesel, color: yellow, operation weight: 2,460 kg, Year of construction: 2015, operating hours: 516 h, Ammann ARX26 Construction Year: 2015 Fuel: Diesel Weight: 2460 kg Power: 22,5 kW Max. working width: 1,2 m Operating Hours: 516 Transport dimensions: 2330 x 1630 x 2550 mm Received: on stock Prsdpfxjy Rxx Tj Ap Dea Description: The machine has good condition, the engine and hydraulic system are very clean and works well. The price is NETTO export. If you have some questions about this machine please write me an e-mail. We can speak: - English - German - Magyar

Condition: used, Year of construction: 2019, operating hours: 816 h, Please contact Kurt Meurrens for more information. Prodsy Skigepfx Ap Dea