Swap body semitrailer

KÖGEL 3-Achs-Containerchassis 20'

You can find our entire vehicle inventory, including immediately and soon available vehicles, on our website.

Excerpt from the equipment list. Complete equipment details available upon request.

Chassis:
* Chassis frame made of high-quality steel, but without an outer frame
* Coupling plate with a dual-kingpin according to DIN 74080 / ISO 337
* With cross member and container locks for accommodating: a) 1 x 20' container flush with rear, b) C715
* Vehicle equipped with Quick-Lock fastenings!

Running Gear:
* Lift axle mechanism on axle 1
* Fully automatic, load-dependent lift axle control. Start assist: activation by pressing the brake 3 times, 30% overload up to a speed of 25 km/h
* SAF three-axle assembly, with disc brakes approx. Ø 430 mm, offset approx. 120 mm. Air suspension with approx. 180 mm travel

Vehicle Tyres:
* Wheels with internal sensors according to UN ECE R141
* 6 tyres 385/65 R 22.5, AUSTONE ATH155
* 6 steel rims 22.5 x 11.75, offset approx. 120 mm (ET 120)

Chassis Attachments:
* JOST landing gear, mechanical with compensating foot, approx. 24 t lifting capacity. Single side operation to the right in the direction of travel
* Spray suppression system in accordance with Regulation (EU) No 109/2011, consisting of: 3 pairs of semi-circular mudguards with mud flaps
* 2 wheel chocks with holder
* Fixed rear underrun protection from steel according to ECE-R58, bolted design

Brake / Air Suspension System:
* EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connecting lines), parking brake as spring-loaded brake, external pneumatic connections and external EBS diagnostic connector via ISO 7638 socket
* WABCO EBS system
Hjdey Rwx Sjpfx Aaiefg
* Air suspension system incl. 1 raise and lower valve, installed between 1st and 2nd axle in the direction of travel
* 2 fool-proof coupling heads at front ISO 1728
* Air tanks for brake system and air supply made of steel (EN 286-2)

Impact Protection:
* Solid steel rear bumper attached to the end cross member

Electrics / Electronics:
* Steel light carrier, arranged above the underrun protection
* KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED front marker lights and reflectors - flashing LED side marker lights - Superseal and bayonet connectors for the lights
* 2 multi-chamber LED tail lights with integrated LED outline markers on arm
* Spiral adapter connection cable (4m) from 15-pin socket to 2x7-pin plugs. Not ADR-compliant!
* 15-pin socket at front ISO 12098 (without connecting cables)
* 2 LED reversing lights (manufacturer as per our choice) mounted at rear. The operator must ensure sufficient electrical protection of the tractor unit (ISO 12098 Pin 8, ISO 3731 24V-S Pin 3)
* Complies with vehicle class EX/II, EX/III, FL, AT

Information Systems:
* Tyre pressure monitoring system according to UN ECE R141

Accessories:
* 1 fire extinguisher 6 kg with pressure gauge (European approval). Mounted including holder and protective cover on the left side of the landing leg in the direction of travel

Paintwork:
* The surface coating of assembly units (e.g. front frame extension, folding container locks, center supports) in Kögel black (KÖGEL KTL system, nano-ceramic and KTL coating)
* The frame receives, in addition to KTL coating, a full-surface paint in deep black RAL 9005

Documents:
* EX III version - ADR certificate

The listing was translated automatically. Translation errors are possible.