Tipper

Stas

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration 07/2024, from first owner Mileage only 69,324 km Internal dimensions (L x W x H) 13,513 x 2,475 x 2,536 / 2,752 mm >>> Saddle height 1,200 to 1,250 mm Axle distance 1,310 mm Unladen weight 7,880 kg Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with anti-roll system RSS WABCO Smartboard with axle load indicator >>> 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank made of aluminum Tire size 6x 385/65 R 22.5 Crank-operated saddle JOST full-load Lighting ASPÖCK full LED 4 x LED work lights Toolbox on the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 planks, material thickness 10 mm, ribbed >>> with floor reinforcement for forklifts and full load, sliding bearings Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails 2 pieces, reinforced waste disposal version Roof tarpaulin, reinforced version >>> Rear crossbar swivels, can be operated from the ground with grain slide in the left door leaf Lasdpsy S Nqcsfx Aldoc RENTING is the new BUYING, and it is immediately available with us, even in FULL-SERVICE LEASING.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Reinforced continuous chassis design, new body manufactured using a self-supporting construction with corresponding reinforcements in the lower belt for exceptionally high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semitrailer construction max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EU regulation, without central control unit option), (optional: 1st and 3rd axles can be lifted via a control). Lsdpegcw Rmefx Aldeac Tires and Wheels 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims, silver, 11.75x22.5 ET 120. Landing Gears Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot. Braking System According to E.G. standard, EBS E-system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System According to the guidelines of the EU standards 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint 3 integrated into the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated into the U-protection. Body/Dump Body: Body fully welded inside. Reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum dump body, side walls with 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor designed as a sliding floor system on 140 mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30 mm thick with 2 swivel rod locks, attached in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side. Hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, sliding rear discharge wall with Kevlar liner approx. 1,800 mm length plus side Kevlar sealing, service door in the front wall with ladder swinging inwards. Hydraulic System: Cargo - Floor Sliding Floor System Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE/HD sliders plus anti-lifting slide bearings, type CF 10 mm floor design, hydraulics with approx. 200 mm working stroke, fixed elements on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed elements, line size NW 21, fixed elements with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated into a l

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2019, loading space volume: 58 m³, wheelbase: 8,710 mm, color: red, Year of construction: 2019, Equipment: ABS, = Additional options and accessories = - Alcoa Dura-Bright wheels - Aluminum chassis - EBS (Electronic Braking System) - Grain sliding mechanism - LED work lights - Light alloy rims - Light alloy rims - Steerable axle - Air suspension - Trailing steerable axle - SAF axles - Disc brakes = Further information = Axle configuration Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Unladen weight: 6,340 kg Payload: 32,660 kg GVW (Gross Vehicle Weight): 39,000 kg Condition Technical condition: very good Optical condition: very good Damage: none Lodozgb Dhopfx Aldjac Identification Registration number: OR-54-YJ = Company information = Would you like to finance this vehicle? No problem. We can quickly arrange a favorable financing lease agreement for you with a term of 12, 24, 36, 48, or 60 months. You can find all photos and further information at [website address] or contact us directly.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2021, next inspection (TÜV): 08/2023, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,740 mm, loading space volume: 90 m³, Year of construction: 2021, Equipment: ABS, ecoSTAR 90 cbm graphite black ECOSTAR FE CHASSIS - V13500 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Laodezfdgiopfx Aldec Internal length of the body: 13500 MM Internal width of the body: 2475 MM Internal height of the body: 2650/2740 MM Volume of the body: 90 cbm Saddle height: 1150-1180 MM TECHNICAL DESCRIPTION 1. FRAME SUBFRAME High-quality steel S355JR (= ST52.3) construction. Chassis not painted but galvanized (EN ISO 1461), hot-dip galvanizing. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 tons Suspension: Original SAF air suspension Brakes: large disc - INTEGRAL Offset: ET 120 BVA: with BRAKE WEAR INDICATOR LIFT AXLE FUNCTION The third axle is a trailing steering axle (internal height front/rear 2650/2740 mm) + First axle is a lift axle STARTING ASSISTANCE is activated when a button in the truck is pressed (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. TIRES 6 x 385/65 R 22.5 on steel rims. ET 120. SADDLE BRACKETS JOST module with outrigger pads for air-suspended vehicles. Steering with single-hand operation and 2 speed levels. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-line compressed air brake system according to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets REAR LIGHTING IN THE UNDERBODY PROTECTION. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. WORK LIGHT ON THE FRAME 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console. EXTRA WORK LIGHT 1 work light (Workpoint LED) on the front wall (INSIDE - right) - with switch in the front. HYDRAULIC SYSTEM Pressure: ? Female. Return line: 1 Female. HYDRAULIC POSITION Connection on the front wall. With additional connection option below the body in front of the support legs. Aluminum ladder (3.7 m) attached to the side impact protection (right). RETRACTABLE LADDER AT THE REAR integrated into the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking, with a 1-piece cover plate (floor cover not possible). TOOLBOX PVC with key (800 x 460 x 430 mm). Rear LEFT POSITION CONTROL CONSOLE + BOX TEM The control console is mounted on the rear left. The box for operating the floor system is also mounted on the rear left. FENDERS 6 plastic single wheel fenders. 2 Clear Pass spray guards are permanently attached to the plastic fenders. 2. BIN FRONT WALL The front wall consists of 30 mm thick aluminum plank profiles, type 600, with reinforced corner joints. COVERING INSIDE BETWEEN FLOOR-FRONT WALL Solid seal between the floor and the front wall by means of an aluminum profile and PVC sealing. SIDE WALLS Side walls with smooth design inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. FLOOR SYSTEM CARGO FLOOR CF 500 SL-C E-operation. 21 floor slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. Rear end plate made of aluminum. OPERATION OF THE FLOOR SYSTEM E-operation - Electrical with remote control (original Cargo Floor + multifunctional).

Condition: used, mileage: 298,630 km, power: 132 kW (179.47 HP), first registration: 11/1998, fuel type: diesel, wheelbase: 3,700 mm, fuel: diesel, gearing type: automatic, emission class: euro2, suspension: steel, total length: 7,340 mm, total width: 2,400 mm, total height: 3,350 mm, loading space length: 4,240 mm, loading space width: 2,340 mm, loading space height: 610 mm, Year of construction: 1998, Equipment: crane, = Additional options and accessories = - Adjustable steering wheel - Driver seat air suspension - Heated mirrors - PTO = Remarks = Laedpfxouwu Ipo Aldoc Additional information : Brand: VOLVO Model: FL 608 Structure: crane flatbed ( PK 8200 - boom 8 m / 930 kg - box L=4249 mm / W=2340 mm / H=615 mm ) Year: 11.1998 Mileage: 298630 km VIN: ... B211381 Wheel formula: 4x2 WB: 3700 mm Engine: D6A180 132 Kw / 180 Hp / Euro 2 Gearbox: automatic Suspension: steel / steel Brakes: drum Dimensions: L/W/H: 7340 mm / 2400 mm / 3350 mm Masses: full/empty: 8000 kg / 6290 kg Reach : 8.0 m Max lifting capacity at the end of a jib : 930 kg Axle configuration : 4x2 Suspension type : leaf_spring Brakes : Drum Suspension type : leaf_spring Brakes : Drum = More information = Cab: single Suspension: leaf suspension Empty weight: 6.290 kg Carrying capacity: 1.710 kg GVW: 8.000 kg Crane: Palfinger PK 8200, year of manufacture 1986

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 04/1982, loading space length: 12,250 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, total length: 12,500 mm, total width: 2,450 mm, total height: 2,450 mm, suspension: steel, tire size: 385/65-R22.5, Year of construction: 1982, = Additional Options and Accessories = - Leaf spring suspension - Drum brakes = Notes = 1982 STAS HEAVY DUTY platform trailer with ROR axles with drum brakes, 7-leaf leaf spring suspension, robust chassis, hardwood floor, 2 heavy-duty tie-down points on the side members, 2 x 3 tie-down points in the center, loading area dimensions: 12.25 x 2.42 m (L x W), front wall height 1.05 m, 3.5-inch kingpin, unladen weight 6,390 kg, permissible total weight: 32,000 kg, tires 385/65-R22.5 (L: 7/7/12 mm; R: 8/13/13 mm), Belgian registration with valid main inspection until 03/14/2027 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: ROR DRUM Brakes: Drum brakes Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 50% Rear axle 2: Max. axle load: 8000 kg; tire tread depth left: 45%; tire tread depth right: 80% Rear axle 3: Max. axle load: 8000 kg; tire tread depth left: 75%; tire tread depth right: 80% Weights Unladen weight: 6,390 kg Payload: 25,610 kg GVWR: 32,000 kg Functional Body brand: STAS 0-3-32-B-ST55 Ledpfx Alezfaigsdjac Maintenance, History and Condition APK (Technical Inspection): valid until 04/2027 Technical condition: very good Optical condition: good Additional information Please contact Arne Honingh for further information.

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2008, Axle configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle 2: Aluminum rims; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Rear axle 3: Aluminum rims; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 4,890 kg Payload: 33,110 kg GVW: 38,000 kg Lodpfxszdy Srj Aldeac Condition Damage: None

Condition: used, mileage: 406,578 km, power: 100 kW (135.96 HP), first registration: 11/1997, fuel type: diesel, fuel: diesel, color: blue, gearing type: mechanical, emission class: euro2, number of seats: 2, total width: 2,500 mm, loading space volume: 8 m³, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 1997, Equipment: ABS, EBS, crane, trailer coupling, Engine capacity: 4.249 cc GVW: 7.490 kg Ljdpfxext Tnfs Aldoac Crane: Palfinger Selling price: € 12.000, US$ 13.980 Purchase on credit is possible: Yes Leasing is possible: Yes

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "X-Shape" First registration 10/2024 Mileage 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous 5 mm HardoX steel HB450 floor Front wall and side walls 4/3 mm HardoX steel HB450 Angled front wall, internal access 2-wing portal doors with pneumatic post-release 1 grain hatch in the right door leaf Reinforced rollover tarp, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators below body Lasdpfeyy Haksx Aldjc SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminum folding ladder Holder for shovel and broom Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available for immediate delivery as FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 Lodpfxexriu Eo Aldjac 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: used, mileage: 351,885 km, power: 294 kW (399.73 HP), first registration: 12/1996, fuel type: diesel, empty load weight: 11,800 kg, maximum load weight: 14,200 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 2, total length: 2,500 mm, total width: 3,250 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, 1x air seat, rear window, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 16, ABS (anti-lock braking system), constant throttle, air suspension, tow bar air-light-hydr., environmental badge red Wheelbase: 4200 mm Body: Marrel hook MA 26.70 for 6.5 m container VA wheels 385 / 65 R 22.5, 6-cylinder turbo engine!!! converted to 6x2 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ljdpevhg Ryjfx Aldeac

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, condition: like NEW Mileage: 62,270 km Dimensions inside (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (conical design in width) Unladen weight: only 7,820 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4 / 3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing rear portal doors with pneumatic remote unlocking GRAIN SLIDE with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, type Alpha, suitable for high and low pressure Crank landing legs, rated for full load 2x pneumatic vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO trailer EBS with RSS roll stability control WABCO Smartboard Automatic tipping lowering system Hydraulic lift and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium wheels Aluminium access ladder Shovel and broom holder Right-hand toolbox 4x LED reverse lights RENTING is the new BUYING – also available from us as a FULL-SERVICE RENTAL, immediately available----- Lodpfxsyl Tfvs Aldsac

Condition: used, maximum load weight: 34,900 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 10/2026, loading space length: 10,000 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,861 mm, Year of construction: 2021, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "AGRAR-LINER" First registration 04/2021 Mileage 203,910 km Internal dimensions (LxWxH): 10,000 x 2,350 / 2,450 x 2,280 mm (conical body design) Unladen weight only 7,100 kg Z-chassis, cranked design Floor made completely of 3 mm Hardox steel HB450 Front wall and side walls 3 mm Hardox steel HB450 Inclined front wall, interior access Single-leaf aluminum combination door with swinging function, pneumatic rear unlocking 1 grain discharge slide Reinforced roof roll tarp HYVA tipping cylinder, Alpha type, suitable for both high and low pressure Full-load aluminum landing legs Laedpfoy Nvrzox Aldoc 2x pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm First axle is a lift axle WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard Raise and lower device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING – immediate availability also on full-service rental with us-----

Condition: used, maximum load weight: 28,240 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, Year of construction: 2013, Equipment: ABS, Air, lift, MB disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguard, UFS foldable, trough made of HB 450 floor 4mm, side walls 3.2mm thick, rear wall 1/2 + 1/2, ladder and walkway, roof frame, loading pressure gauge, 2xWZK, roll-up tarpaulin with central locking Laedpfxouwhrus Aldsc

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 11/2026, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, STAS Biostar Walking Floor +/- 92 cbm, 'Cargo-Floor' floor with 21 slats, 6 mm, complete emptying (moving bulkhead), push-pull function, wireless remote control for floor, double-wing rear door with rotary bar lock, front access and standing platform, roll tarp, service door in front wall, folding beam above doors, ABS, EBS, SAF Intradisk+ axle(s), 1st axle is a lift axle, disc brake system, Wabco Smartboard, air suspension with lifting and lowering device, support legs, stainless steel storage box. The vehicle may have advertisement stickers and/or lettering attached. Lajdpfeyzvxxsx Aldoc SI86735 Our offer generally does not include a new roadworthiness inspection (TÜV). If a new TÜV inspection is required, we will gladly provide an offer from our partner workshops! The vehicle may have advertisement stickers and/or lettering attached. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this item. Please do not hesitate to contact us!