Lowbed semitrailer for transportation of construction machinery

CTC ZA90SRT47 Tieflader 11.87m+hydr. Rampen

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm Rsdpfxoxqkaye Abnsu - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: used, mileage: 550,000 km, power: 368 kW (500.34 HP), first registration: 05/2010, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, loading space length: 8,500 mm, Equipment: air conditioning, parking heater, * Iveco AS320S50X construction machinery transporter, 4 axles * First registration: 2010 * 550,000 km * Euro 5 * Cursor C13 engine * 500 hp * Leaf-air suspension * 8x2 axle configuration * 2nd axle: lift axle * 4th axle: steering, lift axle * Air conditioning * Retarder * Auxiliary heater * PTO (power take-off) * Automatic transmission * Hydraulic ramp * Water tank * Loading platform: 8.50 m * Wheelbase: 6.10 m * Axle distance 1-2: 4.65 m * Axle distance 1-4: 7.50 m Rodpfx Abjxybz Hensu * Unladen weight: 14,150 kg * Gross vehicle weight: 32,000 kg * Payload: 17,850 kg

Condition: excellent (used), functionality: fully functional, empty load weight: 9,800 kg, maximum load weight: 30,200 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 02/2026, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 870 mm, total length: 13,700 mm, suspension: air, tire size: 245.70 R 17.5, color: red, trailer brake: trailer braked, Year of construction: 2022, Equipment: ABS, tail-lift, Used Komodo low loader semi-trailer with ramps, year 2022, 3 axles with lowered gooseneck platform, 1st axle liftable and 3rd steering, EBS, 10m low deck with ground clearance 87cm, double grating ramps 4.0m long, width adjustable, side extensions, RUD side and floor hooks 8t, removable side boards on neck, air suspension, deck in wood and steel, side toolbox, large neck box, dual speed landing legs, excellent condition, inspected until 28.02.2026 – DEALER INTERDRIVE SRL-PARMA Rsdpfxsyfwdio Abnju

Condition: used, mileage: 328,120 km, first registration: 06/2020, color: green, IVECO AS260S46, Year 2020, Euro 6, Green color, 328,120 km, Wheelbase 4200+1395 mm, ZF automatic transmission, intarder, retarder, 1st axle rated at 8 tons, 3rd intelligent steering axle, differential lock, air conditioning, large cab, low roof, equipped with brand-new BOB Italev 26-ton hooklift system with slewing function, hydraulic front and rear locking, vertical roller, hydraulic setup for crane body and trailer. Rjdpfx Aexu Dzfsbnsu

Condition: used, axle configuration: 3 axles, total length: 13,400 mm, total width: 2,540 mm, Year of construction: 2022, Year of manufacture: 2022 Rear axle 1: Double wheels; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40% Rodpfsy R N Tuox Abnou Rear axle 2: Double wheels; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Rear axle 3: Double wheels; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Empty weight: 10.770 kg Carrying capacity: 34.230 kg GVW: 45.000 kg Double Hydraulic Ramps 240 cm + 150 cm Hydraulic Sliding Left to Right APK approved until 30.05.2026 Bed = 930cm Neck = 330cm Floor height 83cm

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,700 mm, loading space width: 2,540 mm, loading space height: 890 mm, suspension: air, tire size: 235/75 R 17.5, color: grey, Equipment: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading deck length, approx. 3,700 mm long, rear end with chamfer approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 Loading Deck: - Loading deck, approx. 9,700 mm long with hydraulically folding and lowering rear section, plus hydraulically liftable front section for driving onto the gooseneck Axles and Tyres: - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle self-steering - 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manual switch - Technical axle load: 12,000 kg - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF, twin tyres - TPMS tyre pressure monitoring system according to ECE R 141 BPW Auto Reverse Control: - Electrohydraulic auxiliary steering for self-steering axle of 3-axle assembly - Automatic control of the self-steering axle when reversing using a gyroscope sensor - Manual control for steering in forwards and reverse, via separate radio remote control - Manual operation enabled up to 10 km/h - System supplied via a separate electro-hydraulic unit Included Accessories: - Removable steel front wall, approx. 400 mm high - 3 kW electro-hydraulic power unit - Outer beams on the gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then every 400 mm - One mounting hole in the upper rear area of the outer beams for a bolted lashing ring - On the gooseneck and rear chamfer: grating floor with 5 mm steel reinforcement - 2" kingpin - Guide plate on the gooseneck for the fifth wheel, approx. 500 mm wide - Round NATO socket on the front interface (Maeler & Kaege VG 96 917) Rodpeyw Saksfx Abneu - On the gooseneck: 1 pair of removable ALU sidewalls, approx. 400 mm high, anodized - 4 wheel chocks - Electric cable winch, approx. 5,400 kg pulling force, with radio remote control - Wire rope approx. 24 m long, rope ø approx. 9.5 mm, incl. rope press roller - Winch mounted front inside the gooseneck - Continuous grating floor with 5 mm steel plate reinforcement for additional strength, designed for point load: - on the lift bed - on the loading deck - on the hydraulically lowerable rear section - Painted sand coating on the gooseneck cover plates and in the transition areas between neck and lift bed, lift bed and loading deck, and loading deck and ramps - 1 spare wheel - Hydraulic lift bed, approx. 2,500 mm long, load capacity in raised position while driving: 9,000 kg - Hydraulic cylinders equipped with load-holding valves - Cut-outs in the outer frame of the loading deck and lift bed for inserting tensioning straps - Extensive lashing points - Hydraulic rear section lowerable for loading/unloading and liftable for reducing overall length - Load capacity when horizontal while driving: 10,000 kg - Reduction of overall length when raised: 2,350 mm - Painted sand coating on the complete ramp except extendable galvanized part - Hydraulically extendable rear extensions for loading/unloading - Radio remote control: - Operation of the hydraulic lift bed - Operation of the hydraulic lift of the rear extension - Operation of the hydraulic extension of the rear extension - 1st axle with starting aid - Central lubrication system with 1 pump - 4 extendable warning panels, approx. 423 x 423 mm