Trailer with working platformES-GE
Tandemanhänger - Bordwände, CV
Trailer with working platform
ES-GE
Tandemanhänger - Bordwände, CV
Condition
New
Location
Essen 

Basic data
Price & Location
- Seller location:
- Heegstraße 6-8, 45356 Essen, Germany

Call
Technical details
- Maximum load weight:
- 15,825 kg
- Overall weight:
- 20,500 kg
- Axle configuration:
- 2 axles
- Loading space length:
- 6,550 mm
- Loading space width:
- 2,550 mm
- Total width:
- 2,550 mm
- Equipment:
- ABS
Details about the offer
- Listing ID:
- A217-08-993
- Reference number:
- 37014
- Update:
- 13.05.2026
Description
You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.
Partial list of equipment. Full equipment details available upon request.
Chassis:
* Steel welded construction with welded longitudinal beams and through Z cross-members, narrow cross-member spacing for high floor load capacity
* Ramp storage between the longitudinal beams behind the axle assembly, under the loading floor, with two insertion pockets for one loading ramp each, locking plate in rear header
Underrun Protection:
* According to EU regulations
Front Landing Legs:
* Landing legs with single-sided operation
Rear Support:
* Two adjustable drop-down supports
Axles:
* 2 x 10 t air suspension axle assemblies by SAF, drum brakes approx. 300 x 200 mm, centrally mounted wheels for twin tires, ABS, total air suspension travel approx. 200 mm (lift approx. 140 mm, lowering approx. 60 mm), control via hand lever with latching function
Tires:
* 8 units, 235/75R 17.5 – make of our choice, on steel rims 6.75 x 17.5, mounted with offset
Splashguards:
* PVC, fitted in front of and behind the axles as per EU regulations
Load Securing:
* Around the outer frame, one hole every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with the side walls closed, chamfered outer frame)
* 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t
* Stake pockets for 80/50 plug-in posts: 3 pairs of stake pockets on the outer frame, evenly distributed
Brake System:
* Pneumatic brake system in accordance with EU regulations with EBS
* Two coiled lines for connection to the towing vehicle, red/yellow coupling heads
* Spring-loaded parking brake acting on one axle
Floor:
* Approx. 28 mm thick Z-type hardwood floor recessed into the outer frame
Front Wall:
* Made from 25 mm side wall, removable
Lighting System:
* Lighting according to EU regulations, 24 volt, multi-chamber tail lights, license plate lights, side marker lights, and lane marker lights at the rear, connection plate on the left at drawbar including connection cable with 15-pin and 2 x 7-pin plugs
Accessories:
* 2 wheel chocks with holder
* Removable beacon at the rear
* Supplied with an additional 40 mm towing device (GVW max. 13,500 kg)
Rjdpfx Aoy Auhbebnju
Painting:
* Chassis shot-blasted, cleaned and hot-dip galvanized to latest technical standards
* Body parts cleaned, primed, and hot-dip galvanized
Chassis:
* Hot-dip galvanized + RAL 3002 carmine red
* Side walls: RAL 3002 carmine red
* Kinnegrip stakes: RAL 3002 carmine red
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Attachments: galvanized / KTL black
Conspicuity Marking:
* According to EU, yellow on sides and rear
Including Special Accessories:
* Rear extension by approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable drawbar adjustable in length, 6 x approx. 100 mm, bolted drawbar eye approx. 50 mm, according to DIN 74053
* 4 rows of crosswise stake pockets on the loading platform, evenly distributed
* 12 galvanized plug-in stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1x20' container, extendable to approx. 2,820 mm, as per ISO 1496, EN 284, or EN 452
* 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles
* 6 pieces of
The listing was translated automatically. Translation errors are possible.
Partial list of equipment. Full equipment details available upon request.
Chassis:
* Steel welded construction with welded longitudinal beams and through Z cross-members, narrow cross-member spacing for high floor load capacity
* Ramp storage between the longitudinal beams behind the axle assembly, under the loading floor, with two insertion pockets for one loading ramp each, locking plate in rear header
Underrun Protection:
* According to EU regulations
Front Landing Legs:
* Landing legs with single-sided operation
Rear Support:
* Two adjustable drop-down supports
Axles:
* 2 x 10 t air suspension axle assemblies by SAF, drum brakes approx. 300 x 200 mm, centrally mounted wheels for twin tires, ABS, total air suspension travel approx. 200 mm (lift approx. 140 mm, lowering approx. 60 mm), control via hand lever with latching function
Tires:
* 8 units, 235/75R 17.5 – make of our choice, on steel rims 6.75 x 17.5, mounted with offset
Splashguards:
* PVC, fitted in front of and behind the axles as per EU regulations
Load Securing:
* Around the outer frame, one hole every approx. 150 mm for lashing straps, lashing force approx. 2.5 t (lashing straps can be hooked in with the side walls closed, chamfered outer frame)
* 6 pairs of folding lashing rings, evenly distributed, lashing force approx. 8 t
* Stake pockets for 80/50 plug-in posts: 3 pairs of stake pockets on the outer frame, evenly distributed
Brake System:
* Pneumatic brake system in accordance with EU regulations with EBS
* Two coiled lines for connection to the towing vehicle, red/yellow coupling heads
* Spring-loaded parking brake acting on one axle
Floor:
* Approx. 28 mm thick Z-type hardwood floor recessed into the outer frame
Front Wall:
* Made from 25 mm side wall, removable
Lighting System:
* Lighting according to EU regulations, 24 volt, multi-chamber tail lights, license plate lights, side marker lights, and lane marker lights at the rear, connection plate on the left at drawbar including connection cable with 15-pin and 2 x 7-pin plugs
Accessories:
* 2 wheel chocks with holder
* Removable beacon at the rear
* Supplied with an additional 40 mm towing device (GVW max. 13,500 kg)
Rjdpfx Aoy Auhbebnju
Painting:
* Chassis shot-blasted, cleaned and hot-dip galvanized to latest technical standards
* Body parts cleaned, primed, and hot-dip galvanized
Chassis:
* Hot-dip galvanized + RAL 3002 carmine red
* Side walls: RAL 3002 carmine red
* Kinnegrip stakes: RAL 3002 carmine red
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Attachments: galvanized / KTL black
Conspicuity Marking:
* According to EU, yellow on sides and rear
Including Special Accessories:
* Rear extension by approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable drawbar adjustable in length, 6 x approx. 100 mm, bolted drawbar eye approx. 50 mm, according to DIN 74053
* 4 rows of crosswise stake pockets on the loading platform, evenly distributed
* 12 galvanized plug-in stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1x20' container, extendable to approx. 2,820 mm, as per ISO 1496, EN 284, or EN 452
* 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles
* 6 pieces of
The listing was translated automatically. Translation errors are possible.
Seller
Note: Register for free or log in, to access all information.
Registered since: 2003
77 listings online
Send inquiry
Telephone & Fax
+49 201 8... show
These listings may also fit your interest.
Listing
Essen
7,650 km
Trailer with working platform
ES-GETandemanhänger - Bordwände, CV
ES-GETandemanhänger - Bordwände, CV
Listing
Selm
7,668 km
Van
Mercedes-Benz313 CDI Sprinter DOKA Pritsche AHK
Mercedes-Benz313 CDI Sprinter DOKA Pritsche AHK
Listing
Gralla
8,462 km
Low loader trailer
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Listing
Grevenbroich
7,655 km
Tipper
EduardEDUARD Heckkipper 1500kg sofort online verfügbar im trailershop
EduardEDUARD Heckkipper 1500kg sofort online verfügbar im trailershop
Listing
Legden
7,634 km
Standard tractor unit
IVECOStralis AS440T/P 4x2 Hydraulikanlage EURO 6
IVECOStralis AS440T/P 4x2 Hydraulikanlage EURO 6
Listing
Gevelsberg
7,684 km
Three-way tipper trailer
HUMBAURDreiseitenkipper HTK 10 50 24, GG:10,5 to.
HUMBAURDreiseitenkipper HTK 10 50 24, GG:10,5 to.
Listing
Gevelsberg
7,684 km
Three-way tipper trailer
HUMBAURHTK 754020 Dreiseitenkipper GG:7,5to
HUMBAURHTK 754020 Dreiseitenkipper GG:7,5to
Listing
Groenlo
7,596 km
Tower crane
LiebherrMK88 Plus Valid Inspection, 45 m Flight, 8t Cap, P
LiebherrMK88 Plus Valid Inspection, 45 m Flight, 8t Cap, P
Listing
Lüdersfeld
7,728 km
Car carrier trailer
TEMATemared Carkeeper 4521/2 S 3,0t Autotransporter
TEMATemared Carkeeper 4521/2 S 3,0t Autotransporter
Listing
Lüdersfeld
7,728 km
Car carrier trailer
TEMATemared Carplatform 5121/2 S 3,5t 3.500kg Platt...
TEMATemared Carplatform 5121/2 S 3,5t 3.500kg Platt...
Your listing has been deleted successfully
An error has occurred








































































































































