Tipper

Stas S300CX 50m3 Vol alu Klep/Deuren Liftachse SAF S...

Condition: new, maximum load weight: 32,630 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, loading space volume: 57 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, SCHWARZMÜLLER 3-Axle GRAIN Tipper Body 57m3 6370kg!! BRAND NEW VEHICLE!! Transport Goods: Bulk materials, pallet, and grain transport Weights: - GVW (technical): 39 t - Aggregate load (technical): 27 t - Kingpin load (technical): 12 t - Unladen weight: 6,370 kg Dimensions: - Internal length: approx. 10,500 mm - Internal width: approx. 2,470 mm - Internal height: approx. 2,200 mm - Loading volume: approx. 57 m³ - Overall height unladen: approx. 3,800 mm Frame: - Steel frame welded construction with rear tipping shaft, - Low build height (frame height approx. 280 mm) - 2" kingpin - Frame for fifth wheel height approx. 1,170 mm - approx. 1,250 mm - Mechanical steel landing gears, 2 x 12 t, single-sided operation on the right, - Load compensation Axles: - SAF Intradisc B9 axles with disc brakes ø430 mm (22.5" disc), - Axle load capacity 9 t/axle, On-road version - Axle spacing 1,310 + 1,310 mm - Front axle liftable = raises/lowers depending on load weight, - Additional forced lowering including integrated low-speed start-up aid, push-button operation in cab + function via “3 x brake” action, socket: PIN 12 Wheels: - 6 tires 385/65 R 22.5, 160K, - 6x aluminum rims 11.75 x 22.5, offset 120 mm, polished, brand per factory choice Brakes / Suspension: - Brake system in accordance with EC Directive 71/320 ECE R13, dual-line air brake system - Brake system manufacturer: Knorr - EBS system 2S2M - RSS - stability program - Spring-actuated parking brake - Aluminum air tanks - Brake/air connectors: 2 coupling heads - EBS/ABS socket at the front - Electronic air suspension with automatic lowering device, inductive switch + lowering lock rotary switch + additional lifting and lowering device, operable from cab via CAN bus signal + display (TIM) on trailer Assistance / Safety Systems: - Axle load display via EBS CAN bus signal for display in the cab - TIM - Trailer Information Module by Knorr, display on chassis - SWIT - Schwarzmüller Intelligent Telematics, "BASIC" package - Tire pressure monitoring per ECE regulation 141, with pressure sensors in the wheels Tipping Body: - Aluminum corner tipper in pallet version = smooth inside and outside, - Front and rear walls vertical - Front wall 4 mm with reinforcements - Access steps in the body - Side walls hollow profile 30/3/2 mm with upper stabilizing frame - Rear cross beam = door stop beam swivels, incl. actuation rod - Continuous fixed support over front wall and rear cross beam - Floor plate 8 mm with close cross-ribbing - Side walls internally fully welded and sealed - Combination rear wall 4 mm = double door split in the middle with rubber seal, Iodpfxsyv S Nij Aaiotg - 1 external stainless steel rotary latch - Door hold-back fixture for opened doors - Plus pendulum frame with rubber seal, - Automatic-mechanical 4-hook central locking with lock-off option Slide discharge - 1 grain hatch (approx. 400/400 mm) per door leaf - With side dosing lever and splash guard - Slider plate stainless steel, unpainted - Additional joint for free swinging - Tensioning bolts for closure Hydraulics: - Single-pipe hydraulic system with fixed half-screw coupling HDK BG6 - High-pressure front press for rear tipping, tip angle approx. 48 degrees - Plastic rolling tarpaulin incl. aluminum bar, hand crank + holder at standing platform - Cover sheet has central tube ø 60 mm sewn in with piping attachment on top chord (without customs seal) - 3 locking brackets and catch for rolled-up tarp - Front and rear tarp hooks with zig-zag lacing - 4 removabl

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,795 mm, Year of construction: 2025, Equipment: ABS, Type: External length: 11,106 mm Floor length: 9,890 mm External width: 2,550 mm Internal height: 2,100 mm Track width: 2,040 mm Fifth wheel height: 1,200 mm Wheelbase: 1,310 mm Rear overhang: 1,418 mm Floor height: 1,525 mm Height at max. tipping angle: 10,064 mm Max. cylinder tipping angle: 46° Unladen weight: 6,100 kg Volume: 50.8 cbm Roll tarp: 900g/m² Water tank: 30 l Toolbox: 165 l Aluminum ladder: 2,840 mm Tension chain between sidewalls Super Light chassis frame, straight, longitudinal members with recessed kingpin area Welded structure, weight-optimized made of high-strength S700 steel Air suspension Side underrun protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Distance kingpin to 2nd axle: 6,810 mm Axle spacing: 1,310 mm Rear underrun protection made of steel Foldable rear underrun protection Fifth wheel height unladen: 1,200 mm Number of axles: 3 6x tires 385/65/22.5 Standard (Bridgestone/Hankook) Without spare wheel rim 6x Aluminum rims ABERG AluPro BRUSHED 22.5x11.75 ET-120 Rigid axles No axle lift on the 3rd axle 1st lift axle SAF disc brake axles 3x9000 kg 22.5 INTRADISC CD 2-speed landing gears, full load (BPW Gen2 FL/SAF Hercules) No spare wheel carrier and winch Aluminum ladder L=2,840 mm Toolbox - 165 L (mounted in the middle on chassis, left side) Water tank - 30 L (mounted in the middle on chassis, left side) Shovel and broom on chassis above fender Extendable rear ladder Front wall inclined 20 degrees Side walls SL, inside thickness 2.5 mm, fully welded Internal height 2,100 mm Double-wing aluminum combi door, aluminum (1/2 + 1/2) vertical with portal beam 2 grain sliders 2 bottom tension locks Pallet-width version 5 mm floor Floor crossmember spacing under the floor: 360 mm Trough damping: Polyp Tension chain between sidewalls Operator stand attached to the front wall, access on FR left PVC roll tarp 680 g/m² with quick-release and aluminum winding tube (with vertical rear closure and extension triangle at front and rear, center tube welded into the tarp) Reinforced tarp 900g/m² Brake system: Knorr IVL or Wabco as per manufacturer's choice Spring pressure gauge Steel air tank Control line for lift axle from driver's cab Hydraulic connection kit 1" Iedey Sklbopfx Aaijtg Hydraulic cylinder, eye mounting above The system is designed for semi-trailers and trailers and is used to monitor the tire pressure and temperature of the vehicle. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the rims and a device connected to the EBS. No tire pressure sensor for spare wheel Tipping angle indicator The manufacturer provides a 24-month warranty on the vehicle, subject to the statutory provisions of the respective market. The warranty applies according to the sales and delivery conditions and requires adherence to the maintenance intervals specified in the warranty booklet. Warranty period for ON-ROAD/OFF-ROAD products: - 24 months for the entire product from date of first registration - 36 months on the vehicle frame from date of first registration (excluding surface rust) - 10 years warranty against chassis rust-through (understood as rust formation from the inside out) Export plates and insurance available upon request at extra charge! For export business, we can handle export declarations and registration for you on request for a fee. For exports to third countries, a deposit of 19% of the purchase price applies.

Condition: used, maximum load weight: 33,620 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,800 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5669 Approx. 48m³ Benalu Tipper Semi-Trailer with Swing Tailgate and Smooth Sidewalls / Also available for rent with purchase option ---- * Manufacturer: Benalu * Model: Agriliner FL 8800 * First registration: 09/2025 * Gross weight: 39,000 kg * Unladen weight (as per registration): 5,380 kg * Payload: 33,620 kg * Axles: 3 x Jost with 1st axle as lift axle and traction aid * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R 22.5 on Speedline satin-finished aluminium rims * EBS Wabco * Colour: Chassis RAL 9006, tipper body RAL 9006, tarpaulin grey * Main inspection (TÜV): 09/2026 * Capacity: approx. 48m³ (8.80m long x 2.41m wide x 2.20m high) * Swing tailgate * Central grain discharge chute * Individual wheel arches * Aluminium landing legs (full load) * Folding underrun protection * Automatic lowering when tipping * Load manometer * LED work lights * Grain funnel with dust bag * Rolling tarpaulin with tension straps * Internal access at front left of semi-trailer * Water tank * Operator platform at front with left-hand access Itsdpsy Hn Najfx Aaisg * 3.5m aluminium access ladder at front right under chassis * 1 owner German vehicle!! German documents!! Rental with purchase option possible!! Notice regarding possible errors in this listing: Despite careful preparation of this advertisement, errors in the text or specifications may occur. We do not accept liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or clarify additional questions.