Low loader semitrailer

LANGENDORF SATÜV 30 - 8.900 mm + 4.200 mm telesk.

Condition: new, axle configuration: 3 axles, Year of construction: 2026, We have all Europe documents!      Nwsdpfx Acsqx Nfgowod We can delivery the trailers with FOB-EXW-CPT-CFR-CIF      If you have an interest please contact with us 

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional Nedpotx Nwnofx Acwowd

Condition: excellent (used), functionality: fully functional, machine/vehicle number: WMA30XZZ4HM729049, mileage: 233,992 km, power: 368 kW (500.34 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 9,950 kg, overall weight: 33,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, next inspection (TÜV): 01/2027, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro6, number of seats: 2, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 13,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2016, Equipment: ABS, additional headlights, air conditioning, airbag, differential lock, hydraulics, low noise, navigation system, onboard computer, parking heater, soot filter, traction control, Location: D - 73230 Kirchheim unter Teck Model: TGX 33.500 6x4 BLS Weight specification: 26 t / 33 t (9.0 t / 13.0 t / 13.0 t) Permissible gross combination weight: 120,000 kg Unladen weight: 9,950 kg Fifth wheel load (technical): 36,000 kg Engine: 368 kW (500 hp) EURO 6 Low noise G1 Drive: 6x4 Manual gearbox: ZF 16 S 252 OD with ZF Intarder Tyres: Front axle 385/65 R22.5 / 2 x Rear axle 315/80 R22.5 Cab: XLX medium-height sleeper cab Leaf/air suspension Fuel tank: 400 l and AdBlue tank 60 l, right side Fifth wheel coupling: 3.5" Jost JSK 38C (fifth wheel load 36 t) Cross-member for trailer coupling PTO NH/1C without flange (pre-installed) NATO socket for additional power supply Retarder: 6-stage Central lubrication system Longitudinal and transverse differential locks Wheelbase: 3300 mm Njdpfx Acexz Rbfowswd Steel bumper Compressed air connection in driver's cab Storage box behind cab Driver's air-suspended comfort seat Co-driver's functional seat Seat heating Electric mirrors / heated mirrors Electric window left / electric window right Sun visor / roof hatch 2 comfort beds Air conditioning Eberspächer auxiliary air heater Fog lights / work lights / beacon Further equipment details available on request. Very good condition – German vehicle from first owner – immediately available from stock in Kirchheim unter Teck.

Condition: used, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 11/2004, next inspection (TÜV): 08/2026, * Müller Mitteltal TS3 low loader semi-trailer * First registration: 11/2004 * 3 axles * Air suspension * Gigant axles * Hydraulically operated long ramps, extendable and foldable * Load width extensions from 2.50 m to 3.0 m * Loading length: 8.50 m at 0.85 m loading height * Loading length on neck: 3.40 m at 1.50 m loading height * Support legs Nedpsw Tgkbefx Acwewd * Unladen weight: 10,260 kg * Technical gross weight: 47,000 kg * TÜV valid until: 08/2026 * General inspection valid until: 02/2026

Condition: used, mileage: 470,960 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, had accident, parking heater, soot filter, Vehicle Identification No.: WMA22XZZ5KP115039 ENGINE DAMAGE - Mileage: 470,960 km - 10,711 hours Hydro-Drive - Hydraulic Tilt Own Weight: 7,708 kg German MOT Due XLX Cab PRITARDER, Digital Speedometer Nsdjv Tgwkopfx Acwjwd Automatic Climate Control, Auxiliary Heating, 2 Reclining Beds, Radio, Toll Preparation, Multifunction Steering Wheel, Heated Seats, Refrigerator, Lane Assist, Adaptive Cruise Control, Distance Warning Leaf Spring Suspension Front / Air Suspension Rear Diesel Tank: 580 l Hydraulic Tank: 200 l Wheelbase: 3,600 mm Fifth wheel height: 1,200 - 1,300 mm Tires: 1st axle 385/55 R 22.5 2nd axle 315/70 R 22.5 Subject to change, prior sale, and errors. This description serves as a general identification of the vehicle and does not constitute a warranty under the law of sale. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle fleet, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. GOOSENECK: * Gooseneck in SNT design for optimization of loading platform length, approx. 3,700 mm long, with rear chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except hydraulic winches * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized finish * On the gooseneck: 1 plug-in aluminum rear wall, approx. 400 mm high, anodized finish * Gooseneck covered with approx. 40 mm thick hardwood, king pin area with checker plate * 2" king pin LOADING AREA: * Extendable loading platform, approx. 8,800 mm long, with rear chamfer approx. 500 mm x 10° * A depression in the platform and chamfer to take up excavator dipper sticks, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the truck via standard EBS interface in line with ISO 11992. For correct display, the truck must be able to transmit and display this data. * TPMS tire pressure sensors mounted on all wheels * BPW axles and suspension, 1st axle steered, all other axles hydro-mechanically forced-steered * 1st axle with electromagnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B, static test load = approx. 50,000 kg * 245/70 R 17.5 3PMSF twin tires. Brand at our discretion. Load index 143/141J (146/146F) * Loading area with continuous (between the axles interrupted) 50 mm thick hardwood floor (provides increased coefficient of friction) * Platform locked using welded-on conical locking profiles, every approx. 250 mm; includes pre-tensioning plate * 1 intermediate platform, approx. 300 mm wide, for large-diameter sliding tube * Intermediate platform with recessed loading area and extendable suspension bars for aluminum bridging elements * 1 pair of lashing rings on the front cross-member (LC 10,000 daN) * 8 pairs of recessed lashing rings in the outer frame of the loading area, fold-out to the outside (LC 10,000 daN) * Extendable (galvanized) platform wideners, approx. 230 mm each side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm in front of the axles, fully open to the gooseneck cross-member, approx. 700 x 410 mm (W x D) Nsdpfx Acoyhkrfowswd * ALU covers for the wheel recesses that can also be used as bridging elements for the extension OR as platform widening planks (if the vehicle is equipped with extendable wideners) * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * 1 pair of mechanical rear supports * Steering from front and rear via cable remote control, with single-track control of the axles HYDRAULIC LOADING RAMPS: * DR-15/60-900-4350-KG-HV-M: One pair of two-piece steel ramps, approx. 4,350 mm long and approx. 900 mm wide

Condition: used, mileage: 368,663 km, power: 368 kW (500.34 HP), first registration: 02/2018, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2024, brakes: retarder, color: black, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), had accident, * Engine damage * Chassis number: JM763913 * Multifunction steering wheel * Manual transmission * Cool box * Stationary air conditioning * Navigation system Nwedpfx Ajwta Egocwsd * 2 sleeper bunks ----* Front tyres 385/65R22.5 * Rear tyres 315/80R22.5 * All-wheel Hydro Drive * TÜV valid until 03/2024 * SP until 10/2023 ----Internal vehicle number: 10839-----Errors & prior sale reserved WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us via WhatsApp Whatsapp Whatsapp

Condition: used, mileage: 466,000 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2025, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, parking heater, COMPLETE TIPPER COMBINATION!!! MAN TGX 18.500 HAD Chassis no.: KM832968 1 bed Built-in wardrobes Retarder Air conditioning HAD Nwjdpfxsv Dchte Acwed Tires approx. 70% 1 owner Original paint Refrigerator ===== Schmitz Tipping semi-trailer Steel Aluminum rims Year of manufacture: 04.2015 Camaro cover Air lift axle Unladen weight: 6,400 kg SKL 24 SL 7.2

Condition: used, maximum load weight: 18,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2009, next inspection (TÜV): 07/2026, loading space length: 13,000 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2009, Equipment: ABS, Low Loader Faymonville STZ-3AUB, specifically designed for work platforms and machinery transport Nsdpfx Acjyxit Rowewd 3-axle semi low loader trailer First registration: 06/2009 Tyre size: 235/75R17.5, tread depth 3-11 mm Gross weight: 42,000 kg or 48,000 kg Unladen weight: 13,800 kg Dimensions (L x W x H): 14,500 x 2,550 x 3,700 mm Hydraulic lift bed Extendable by 3,300 mm Forced steering, 2x steering axles, 1x lift axle, split ramps hydraulically adjustable, 4,600 x 850 mm, hydraulic supports, winch with remote control, loading height 890 mm, NATO socket Low loader has its own hydraulic system, open mesh floor Brakes and tyres require servicing Further details and additional pictures available upon request. This description does not constitute a binding offer and may contain errors; no guarantee for the accuracy of all information. Please also visit our homepage.

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB Year of manufacture: 2013 8-12 ton SAF axles Unladen weight: 13,400 kg Payload: 47,600 kg Gross vehicle weight: 61,000 kg Fifth-wheel load: 25,000 kg Power steering on 3 steering axles Hydraulics compatible with NATO EBS, ABS, ALB Hydraulic bridge between floor and gooseneck Bridge length: 3,000 mm Air suspension 2-point hydraulic stabilizers at rear Bi-directional hydraulic ramps: - Length: 2,800 + 1,700 mm - Hydraulically adjustable left to right Winch Dimensions: Gooseneck: Length: 3,700 mm Width: 2,500 mm Height: 1,450 mm Fifth-wheel height: 1,250 mm Load floor: Length: 9,200 mm Width: 2,550 mm Height: 900 mm Tyres: 245/70R17.5, 70% tread remaining ID No.: 668 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations made by Heinhuis, as well as all agreements entered into by Heinhuis and all related pre-contractual negotiations. Any form of response implies acceptance of Heinhuis’ General Terms and Conditions and confirmation that these have been acknowledged. Our prices are net export prices. = Further Information = Year of manufacture: 2013 Unladen weight: 13,400 kg Payload: 47,600 kg Gross weight: 61,000 kg Price: On request Nwodpfoycuq Usx Acwsd = Company Information = For more information: WhatsApp: