Horse transport trailer

Humbaur HUMBAUR

Condition: used, overall weight: 3,500 kg, first registration: 05/2019,

Condition: used, maximum load weight: 1,300 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 10/2007, next inspection (TÜV): 04/2025, loading space length: 3,260 mm, loading space width: 1,650 mm, loading space height: 2,250 mm, total width: 2,230 mm, total height: 2,520 mm, Year of construction: 2007, Equipment: tail-lift, Blomert 2 Horse Trailer * 2-horse trailer * Horse transporter * Livestock trailer * Poly roof * Wooden body * Wooden floor * Central partition wall with stall bar system * First registration: 15.10.2007 * Inspection valid until: 04/2027 * Gross weight: 2,000 kg * Unladen weight: 700 kg * Payload: 1,300 kg * Overall dimensions: 4,620 mm x 2,230 mm x 2,520 mm * Internal dimensions: 3,260 mm x 1,650 mm x 2,250 mm * Saddle compartment * Side windows (left & right) * Side step protection * Right-side entry * V-drawbar * Steel rims * Tarpaulin roller blind * Non-slip loading ramp * Jockey wheel The vehicle shows age-related and typical signs of use and wear for this type of construction and may require technical attention. Constantly over 30 new and used trailers in stock ATTENTION !!! PLEASE READ CAREFULLY !!! We explicitly reserve the right to prior sale, as this item is also offered on other platforms. We strongly recommend inspection and testing to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged!!! Images may be similar; accessories shown in the images may be subject to additional surcharge. The stated internal dimensions are approximate values. All information provided without guarantee; errors excepted. For new vehicles, freight and delivery charges apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART-EXCHANGES AND ADDITIONAL PAYMENTS WELCOME!!! Showroom location: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday – Friday 8:30 to 17:00, Saturday 8:30 to 14:00 Lredpfx Adjw Etfdewsi Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, empty load weight: 2,250 kg, maximum load weight: 5,250 kg, overall weight: 7,500 kg, axle configuration: 2 axles, loading space length: 6,070 mm, loading space width: 1,450 mm, loading space height: 2,200 mm, suspension: air, tire size: 215/75 r15,7, color: orange, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 7.5 to tandem three-way tipper with ramp shaft, Typ. HTK 754020 Premium --- --- Lrjdpfx Aden Sl Htewei INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAW TUBE INCLUDING HOT-DIP GALVANIZED TIPPER BODY including lockable ramp cover with lid (privacy screen) --- --- Equipment: * Permissible total weight 7,500 kg * Payload approx. 5,250 kg * Loading area approx. 4,000 x 2,030 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 6,070 x 2,200 x 1,450 mm * Bridge floor made of 4 mm fine-grained steel * Finishing of the tipper body & chassis through complete hot-dip galvanizing * Side walls in RAL color of choice (galvanized for an additional charge) * Laser-welded quality steel drop sides, 400 mm high * Side and rear drop sides can be folded down, removable and swinging with central locking; galvanized plug-in & quickly removable rear stanchions * Solid front wall made of galvanized steel, plugged and removable * Infinitely height-adjustable drawbar for coupling heights unloaded approx. 560 - 900 mm * DIN screw drawbar eye Ø 40 mm * Heavy-duty automatic support wheel * 2 pieces of 3 to lashing rings recessed in the corners * 3 pairs of 1 to drop lashing brackets recessed in the outer frame * Tilt angle side / rear: 45 ° / 48 ° * 2 telescopic folding supports at the rear of the vehicle * Lockable storage shaft with plastic rollers for 2 optional ALU drive-on ramps integrated in the frame * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Hydraulic three-sided tipping mechanism with control via the towing vehicle (max. 200 bar); five-stage tipping cylinder with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection; * Mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 215/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU ramps * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally available for an extra charge: * 1 pair of ALU drive-on ramps (4.4 t/pair) with support legs at the rear, length approx. 3,050 mm x width approx. 400 mm (tare weight approx. 31 kg/each) * Plastic toolbox mounted under the loading area * Galvanized side walls * 24 volt electro-hydraulic system with battery and remote control * Steel attachments etc. ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works - Gersthofen

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: air, Equipment: ABS, HUMBAUR 3-axle low loader semi-trailer with offset loading area, Typ. HTS30K-V44+ --- INCLUSIVE lift axle INCLUSIVE self-steering axle with SAF air suspension INCLUSIVE 3-meter package INCLUSIVE stowage box under cargo bed INCLUSIVE TIM/WABCO Smart Board for axle load display INCLUSIVE Hot-dip galvanized chassis INCLUSIVE ALU drop sides and stowage box to the semi-trailer platform INCLUSIVE stake pockets and lashing ring package INCLUSIVE excavator trough Equipment: V44+ * Gross vehicle weight 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized * SAF air suspension unit including lifting and lowering * INCLUSIVE hot-dip galvanized chassis * Lift axle with starting aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * LED lighting system * Loading height approx. 890 mm * Saddle height: approx. 1,230 mm * 235/75R17.5 tires - 12-ply * Drop deck length approx. 8,680 mm incl. slope * Saddle platform length approx. 3,500 mm incl. slope * Excavator trough * 2" kingpin can be offset by 340 mm for 2+3-axle SPM * Gooseneck with 400 mm bulkhead * 400 mm folding aluminum side wall + storage box with lid * Ramp rail at the offset to the gooseneck * 3 pairs of lashing rings 6 tons sunk into the raised bed * 3 pairs of lashing points 3 tons in the bunk bed outer frame * 5 pairs of lashing rings 10 to. recessed in the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 3 pairs of stake pockets in the outer frame of the high bed * 5 pairs of stanchion pockets in the low bed outer frame * 3-meter widening package with folding boom, wooden planks * Sheet steel toolbox under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Warning package with lighting * Rotating beacon at the rear * 1-section ramps approx. 3150 x 750 mm - drive-on angle approx. 10° * Softwood flooring on ramps, low loading & semi-trailer platform * Spring lifting gear to the ramps * COC papers * 48,000 kg GVW only with special permit according to §70 * Climbing rails on the ramp slope * Brake connection: red/yellow * Electrical system: 3-way socket with 2x7-pin socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 --- Example pictures - equipment may vary ! ∗Stock vehicle - promptly available ∗Subsequent sale reserved Lodpfekn N S Uox Adwjri ∗Price ex works

Condition: used, maximum load weight: 1,350 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 03/1991, next inspection (TÜV): 11/2027, loading space length: 3,250 mm, loading space width: 1,650 mm, loading space height: 2,250 mm, total width: 2,200 mm, total height: 2,673 mm, Year of construction: 1991, Equipment: tail-lift, Böckmann Classic * 2-horse trailer * Horse transporter * Livestock trailer * Full polyester body * Wooden floor * First registration: 26.03.1991 * Technical inspection (TÜV) valid until: 11/2027 * Gross weight: 2,000 kg * Unladen weight: 650 kg * Payload: 1,350 kg * Overall dimensions: 4,450 mm x 2,200 mm x 2,650 mm * Internal dimensions: 3,260 mm x 1,650 mm x 2,300 mm * Central partition with stall bar system * Side kick protection * Side windows left and right * Access door on the right * V-drawbar * Steel rims * Roll-up tarpaulin * Non-slip loading ramp * Automatic jockey wheel The vehicle displays age-appropriate signs of use and wear typical for this type of construction. Lodpfxoxy Elco Adweri Constantly over 30 new and used trailers in stock. IMPORTANT!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right for prior sale, as we also advertise this item on other platforms. We strongly recommend inspection and verification to avoid any misconceptions regarding the condition and suitability of the item. Viewings and inspections are possible at any time by prior arrangement and are expressly encouraged!!! Images are for reference only and may include optional accessories available at extra cost. All internal dimensions are approximate values. All details are provided without guarantee! Subject to errors. For new vehicles, freight and delivery costs will be added. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! TRADE AND CASH-UP OPTIONS AVAILABLE!!! Showroom address: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABLE SUSPENSION - V2-Plus --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS brake system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon INCLUSIVE stake pockets & lashing ring package INCLUSIVE storage box at the top front of the platform, with hinged lid INCLUSIVE 3-meter package with storage compartment Equipment: * 24-month warranty * Gross vehicle weight 30,000 kg * Payload approx. 23,500 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * Storage box at the top front of the plateau, with hinged lid * 3 pairs of lashing rings 10 to. recessed in the low bed * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 4 pairs of lashing points 2 to. over wheel cut-out 2nd and 3rd axle * 6 pairs of stanchion pockets in the outer frame (stanchion pocket package) * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting mechanism and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * 3-meter widening package with folding boom, wooden planks Lsdpfxokn N S As Adweri * Sheet steel tool box under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit in accordance with §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Optional variants at extra cost: * V2 Plus with hydr. ramp lift = € 1,000 net surcharge * V2 PlusPlus (spring lifter) with excavator trough = 700 € net surcharge * V2 PlusPlus with hydr. ramp lift & excavator trough = € 1,700 net surcharge --- ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, maximum load weight: 31,300 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 7,130 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: air, Equipment: ABS, center pivot plate, trailer coupling, Humbaur HTD40-K V20 Total weight 40,000 kg Payload approx. 31,350 kg Chassis frame hot-dip galvanized Bogie frame hot-dip galvanized Drive-on ramps hot-dip galvanized Air suspension with manual REAR lowering at the rear SAF axle with drum brake EBS electronic braking system Tires 235/75R17.5 – 16-fold Low bed length approx. 7160 mm Hole for excavator boom storage, approx. 3000 mm x 730 mm x 180 mm in the rear area of the low bed 4 pairs of lashing rings 10 tons sunk in the low bed 2 pairs of lashing rings 10 tons sunk in the high bed 4 pairs of lashing points 3 tons in the outer frame of the low bed 3 pairs of lashing eyes 6 tons on the outer frame 4 pairs of stake pockets in the outer frame of the high bed 4 pairs of stake pockets in the outer frame of the low bed 3-meter widening package with folding boom without slope 4 x warning signs with lighting Beacon at the rear Storage compartment under the loading area 2 storage compartments with hinged lid in the high plateau Hydraulic ramp jacks 1-part ramps approx. 3150 x 750 mm Softwood flooring for loading area and ramps 40,000 kg GVW only with special approval according to §70 Lodekn N Sujpfx Adweri ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: new, maximum load weight: 24,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,550 mm, loading space width: 2,550 mm, loading space height: 880 mm, Equipment: ABS, center pivot plate, trailer coupling, HUMBAUR 3-axle turntable low loader with offset loading area/high platform, Typ. HTD309525-K - PARABOLIC SUSPENSION - V2 --- INCLUSIVEChassis frame and bogie hot-dip galvanized INCLUSIVE parabolic suspension with rear axle compensation unit INCLUSIVE ABS braking system (suitable for tractor and truck) INCLUSIVE 12 & 24 volt LED multi-voltage lighting system INCLUSIVE warning package and rotating beacon Equipment: * 24 months warranty * Gross vehicle weight 30,000 kg * Payload approx. 24,000 kg * Chassis frame and bogie hot-dip galvanized * Parabolic suspension with rear axle compensation unit * ABS brake system (suitable for tractors and trucks) * 12 & 24 volt LED multi-voltage lighting system, 15-pin 24 volt connection and 13-pin adapter Lsdpfx Ajkn N R Esdwori * Loading height approx. 880 mm * 235/75R17.5 tires - 12-ply * Low loading platform 6,500 mm incl. ramp * B dimension 10,760 mm * Drawbar with 8° inclined drawbar eye Ø 40 mm, height-adjustable * 3-fold towing fork mount for various truck coupling heights * 3 pairs of lashing rings 10 tons recessed in the drop deck * 2 pairs of lashing rings 10 to. recessed in the high bed * 4 pairs of lashing points 3 tons in the outer frame of the low bed * 4 pairs of lashing points 2 tons above wheel cut-out 2nd and 3rd axle * Chassis frame and bogie hot-dip galvanized * 1-section ramps approx. 3150 x 750 mm with spring lifting gear and mech. displacement * Drive-on angle approx. 10-11° * Softwood covering for loading area and ramps * Pendulum support feet at the rear * Climbing rails welded to the ramp slope * 30,000 kg GVW only with special permit according to §70 * Brake connection: red/yellow * Warning package and rotating beacon --- Modular design for easy retrofitting of 3 m folding extension, storage box in the high bed, plank box under the cargo bed, etc. --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works

Condition: new, functionality: fully functional, empty load weight: 960 kg, maximum load weight: 2,540 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 5,220 mm, loading space width: 2,470 mm, loading space height: 350 mm, tire size: 13 Zoll, trailer brake: trailer braked, *NEW VEHICLE* Humbaur HN 355225 GR Special price for stock vehicle Permissible gross weight: 3,500 kg Unladen weight: 960 kg Payload: 2,540 kg Internal box dimensions: 5,220 x 2,470 x 350 mm Overall dimensions: 6,900 x 2,536 x 1,120 mm Loading height: 650 mm 2 axles 13" wheels V-drawbar fully hot-dip galvanized 13-pin plug and reversing lights 18 mm thick floor panel Side panels made of anodized aluminum with recessed locks, fully removable Tie-down rings integrated into the V-exterior frame profile, lashing capacity 400 kg per ring, Dekra certified Jockey wheel Trade-in: We are happy to accept your trailer as a trade-in. Please contact us or send us pictures and specifications of your vehicle. Delivery: On request, your trailer can be delivered after advance payment. The cost is €1.60 per km (distance from Bielefeld to your destination), including VAT. We also offer the following services: Lredpfx Ajykztrjdwsi -Service -Workshop -TÜV/roadworthiness certification -Tires and wheels -Tarpaulins and frames -Special constructions in our metal workshop -Rental Around 400 trailers permanently in stock! We look forward to your visit. Office, workshop, TÜV, spare parts, rental and display area Senner Hellweg 187

Condition: new, maximum load weight: 14,600 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,010 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: air, tire size: 385/65 r22,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19.0 to tandem three-way tipper with Hardox body, Typ. HTK 195024 Gravel tipper PLUS --- INCLUDING HARDOX side walls, rear wall and rear floor, 900 mm high INCLUDING HOT-DIP GALVANIZED CHASSIS & DRAWBAR INCLUDES tipper body and superstructure KTL and powder-coated in color of choice INCLUSIVE with automatic tailgate release INCLUSIVE SAF air suspension and drum brake INCLUSIVE dropside jack in FR left Equipment: * Permissible gross weight 19,000 kg * Payload approx. 14,600 kg * Loading area approx. 5,010 x 2,420 mm * Unloaded loading height approx. 1520 mm * Overall dimensions: LxWxH approx. 7,150 x 2,550 x 2,550 mm * Bridge floor made of 4 mm highly wear-resistant steel, HB 450; * HARDOX superstructure 900x3 mm, swinging side walls with central locking system * Left-hand side wall spring jack in direction of travel * HARDOX rear wall mounted on pendulum bearings, with automatic tailgate release; * Drawbar for coupling heights unbel. approx. 820 - 970 mm * Galvanized drawbar, screwed in, with DIN screw drawbar eye Ø 50 mm * Reinforced 12 t gear support winch with load and fast gear * Lateral / rear tipping angle: 50 ° / 50 ° * Tipping bridge and superstructure KTL and powder-coated in color of choice * HOT-DIP GALVANIZED CHASSIS & DRAWBAR * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Hydraulic three-way tipping mechanism with control via the towing vehicle (max. 200 bar); three-stage telescopic cylinder, 1st stage Oxinite-coated, 2nd + 3rd stage salt-bath nitrided, with lift limiter and safety cables; SVK BG3 hydraulic plug-in coupling as single-circuit connection * 2 pairs of semi-circular mudguards with splash guard system * Chassis frame with drawbar hot-dip galvanized * 385/65 R22.5 tires * SAF air suspension with drum brake axles, electronically controlled for tilt stabilization * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 * Fixed underride guard Your advantages: * Optimum corrosion protection for the chassis/ drawbar thanks to hot-dip galvanizing in an immersion bath * Low tare weight => therefore high payload * Tipper body and superstructure KTL and powder-coated in the color of your choice * HARDOX superstructure for maximum load capacity --- Optional * Roll-up tarpaulin and platform --- ∗Stock vehicle - promptly available ∗Subject to prior sale ∗Price ex works Lsdpfx Adokn N S Rewsri

Condition: new, maximum load weight: 14,510 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,485 mm, loading space height: 1,000 mm, suspension: air, tire size: 385/65 r22,5, Equipment: ABS, center pivot plate, tail-lift, trailer coupling, HUMBAUR 18.0 to building material trailer with platform length 7,100 mm, Typ. HD 18.0 building material (PLUS) --- --- INCLUSIVE hot-dip galvanized chassis & bogie INCLUSIVE aluminium dropside superstructure, anodized INCLUSIVE galvanized Kinnegrip stanchions with dropside partition, transverse at the rear INCLUSIVE gas pressure lifters integrated in the side walls INCLUSIVE SAF air suspension disc brake Equipment: * Permissible total weight 18,000 kg * Payload approx. 14,510 kg * Welded chassis frame with stretched cross members in lightweight construction * Loading area approx. 7,100 x 2,480 mm * Unloaded loading height approx. 1,285 mm * Overall dimensions: LxWxH approx. 8,900 x 2,550 x 2,485 mm (B dimension 8,850 mm) * ALU drop sides 1,000 mm high, anodized, can be folded down at the sides and rear, galvanized Kinnegrip stanchions, transverse at the rear * ALU front wall 1,200 mm high, anodized * Folding steps on the inside of the rear wall * Gas pressure lifters integrated in the side walls * 9-ton SAF Intradisc disc brakes 430mm * SAF air suspension with 385/65R22.5" tires * Drawbar 2,000 mm long, height-adjustable for coupling heights of approx. 700 - 900 mm * 40 mm DIN towing eye * Perforated outer frame, hole spacing 125 mm, 57 pairs of lashing holes, 2000 daN each * 2-circuit air brake system * EBS braking system 24 Volt * Spring-loaded parking brake * Hot-dip galvanized chassis & bogie * Mudguards with spray protection mats * Electrical system: 15-pin 24 Volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Simple and easy handling of the drop sides thanks to the gas pressure lifters * Ideal load securing options thanks to standard lashing options * Height-adjustable towing fork enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works Lodpfx Aekn N Rtodwjri

Condition: new, empty load weight: 2,500 kg, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,460 mm, loading space height: 400 mm, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-over with ramp shaft, Typ. HBT 106224 BE (planks can be pushed in) INCLUDING side walls made of aluminium, anodized INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: Lrodpfxokn N R Ne Adwoi * Permissible total weight 11,900 kg * Payload approx. 9,400 kg * Loading area approx. 6,200 x 2,460 mm * Unloaded loading height approx. 920 mm * Overall dimensions: LxWxH approx. 8,140 x 2,550 x 1,400 mm * Aluminium drop sides, anodized, can be folded down at the sides, removable; galvanized corner stanchions, pluggable at the front and rear * Lockable mounting shaft for optional aluminum ramps in the chassis frame * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * BPW axles * 6 pcs. 6 t lashing rings countersunk * 14 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * High-quality and corrosion-protected anodized aluminium side wall construction * Optimum corrosion protection thanks to hot-dip galvanizing in an immersion bath * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling thanks to the patented securing system of the ALU drive-on ramps * Lockable pick-up shaft * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload Optionally we offer you for an extra charge: * 1 pair of ALU drive-on ramps (8 t/pair) with patented locking system, length approx. 3,570 mm x width approx. 400 mm (tare weight approx. 55 kg/each) ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works