Standard tractor unit

DAF XG+530 FT, Emerald Edition, Intarder, Standkl.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Gbodpfox Nufyox Adqel Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, MENCI SEMI-TRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x H 2,000 mm Floor: 6 mm Rear Floor: 8 mm Unladen Weight: 6,650 kg GVW: 39,000 kg Description, Version & Accessories Gjdpfx Aovzh T Aodqobl - 3rd steering axle SAF with disc brakes Ø430 (ET120) 2/2 - 1st axle with automatic lifting - CRAMARO hermetic electric tarpaulin type C (2023) with cover - Stainless steel toolbox 90x50x50 cm - Toolbox 90x50x25 cm - Complete ADR kit + A & R plates - Pressure gauge - Electric motovibrator operated by remote for cover system - PROMETEON 385/65 R 22.5 tyres - Steel rim 385/65 R 22.5 OFFSET 0/120 - Remote control for CRAMARO tarpaulin - Additional rear LED work light - Painted hubs - Full LED rear lighting - TPMS (Tire Pressure Monitoring System) - Hub color: RED RAL 3020 - Tarpaulin cover color: BLUE RAL 5002 - Tarpaulin height at bows H=300 mm - Cover with ADR tarpaulin - 3 access steps - Anti-wear triangles Chassis in steel, body in alloy Standard Configuration: - Steel chassis - Pneumatic suspension with manual height adjustment valve - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and load-sensing valve - Electrical system according to A.D.R. regulations - Aluminum air tanks, pneumatic quick suspension release device - Tipping system with front 5-stage telescopic cylinder - Pneumatic parking brake - Descent safety valve, double-acting piston hydraulic system with gate valve - Front ladder and removable ladder over the mudguards - 2 towing eye holes on rear underrun protection bar hinge FINANCING OR TAILORED LEASING OPTIONS AVAILABLE ON SITE. From 24 up to 96 installments, also with zero down payment. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY–FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES, INCLUDING: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-Trailer - Refrigerated Semi-Trailer – Lamberet - Schmitz Isuzu - Fixed Box - Crane - Tipper - 4 axle - Rear 4 Axle - Tway - T-Way-540- 460 hp - Xway - X-Way - Three-Way - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tail-lift Body - Refrigerated Unit - Insulated With Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies regarding technical specifications, options or features that may in some cases differ from those described. Please verify the specific features of the vehicle.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Gsdpfx Adjx Nuf Hjqebl Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, machine/vehicle number: efdaf8862775f9506d97b86a5, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front panel, patented 24 t, 2-speed landing gear, single-sided operation, with straight base, without displacement compensation 2 wheel chocks with holders Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface stone-repellent With anti-spray mud flaps only on the last axle 1 tarp rod with holder 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded piping for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver "TPMS" Tire pressure monitoring system according to ECE R 141, display via the towing vehicle, through EBS, no truck installation (requirement must be present in the truck, only on primary tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, "flashing side marker lights" 2 white position lights at front 2 white/red lane guidance lights at rear Gbjdpfx Adei Ri Iheqsl 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant material, headboard 5 mm thick, with external side walls made of 30 mm hollow-chamber profiles, cleanly welded, with bulk material-repellent upper beam profile. Internal step at headboard (not in combination with Cramaro). Shovel and broom holder on the outside of the headboard. Greenline – conical and aerodynamic body design Membrane – tailgate Tailgate pendulum mounted with double hinge and two-wing door split 1/2 to 1/2, top with swing bracket, with one grain chute per door. Tailgate with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with access, connection plate for air/electric and brake, with generous clearance for best possible operability. Roll tarp stows to right side (when viewed from rear), with central locking to the left (from rear) Country of registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, maximum load weight: 34,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 3,930 mm, Equipment: ABS, Horizontal Silo Semi-Trailer NEW | 31–38 m³ | Lightweight Aluminum Construction | from €58,000 New vehicle – individually configurable to your specific application. Horizontal silo semi-trailer in robust, lightweight aluminum construction for efficient transport of bulk materials. Also available in 35 m³ and 38 m³ variants. --- Highlights --- - Horizontal silo semi-trailer made from lightweight aluminum - Available volumes: 31 m³, 35 m³, or 38 m³ - High payload with low tare weight - User-friendly and safe unloading system - Low-maintenance, durable design for daily operation --- Technical Data --- - Model: Horizontal silo semi-trailer - Volume: 31 m³ to 38 m³ (depending on configuration) - Tank: Welded aluminum silo body - Chambers: Single-chamber - Manholes: 2 × DN 450 - Discharge: Rear discharge DN 100 - Operating pressure: up to 2.0 bar - Test pressure: up to 3.0 bar - Operating temperature: approx. –20 °C to +80 °C --- Standard Equipment --- - Aluminum catwalk with anti-slip safety grating - Foldable scissor-type safety rail in accordance with UVV - Aluminum rear access ladder - 2" upper air line at front - 3" side air line (left), with Storz coupling - Check and vent valves Gbsdpfsypa Avsx Adqel - Anti-slip strips in manhole area - Sight glass at discharge - Holders for compressed air hoses - Integrated toolbox --- Running Gear & Safety --- - 3 BPW axles with air suspension and disc brakes - Automatic lift axle (axle-dependent, EBS-controlled) - EBS brake system with stability control - Tire pressure monitoring system (TPMS) according to ECE R141 - LED lighting system per EU regulations - White side reflective tape, red rear marker tape --- Included Options / Accessories --- - Wheel nut caps with manufacturer logo - Load control pressure gauge - Work light at tank - Mechanical JOST landing gear - Aluminum rims (manufacturer's choice) Further equipment and customizations available at any time – we configure your vehicle exactly to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, mileage: 505 km, power: 485 kW (659.42 HP), first registration: 03/2026, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2026, Equipment: AdBlue, cruise control, fog lights, fridge, onboard computer, retarder, soot filter, = Additional Options and Equipment = - Front work lights - High beam - Enclosed cab - Cab - Air suspension - Particulate filter - Sideskirts - Automatic pre-heating system = Notes = Gsdoy Ili Topfx Adqebl Scania 660S Highline 4x2 - New - Full spec - Retarder - Alloy wheels - MY: 2026 - NEW KM: 250 New truck Full spec = More Information = Transmission: Opti Cruise, automatic Suspension: air suspension Front axle: alloy rims; steered; left tire tread: 100%; right tire tread: 100% Rear axle: twin tires; alloy rims; left inner tire tread: 100%; left outer tire tread: 100%; right inner tire tread: 100%; right outer tire tread: 100% Number of cylinders: 8 Gross vehicle weight (GVW): 19,000 kg General condition: very good Technical condition: very good Visual condition: very good

Condition: used, power: 390 kW (530.25 HP), fuel type: diesel, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2026, Vehicle available at our Filago location: Via Provinciale 1/6 - 24040 Filago (BG) Gsdoy Hybnspfx Adqsbl Email: Phone: We accept trade-ins of any vehicle, subject to evaluation. Financing or leasing options available for any amount based on the customer's requirements. We are EXPERTS in remote transactions and can provide you with the best solution to purchase our vehicles, even if you live far from the Province of Bergamo. We invite you to verify the specifications of the listed vehicle. Lodotruck s.r.l. declines any responsibility for any unintentional discrepancies with the description in the advertisement. If you are interested in the vehicle, please specify your city and phone number in your response to the ad. In case of a trade-in, please include: make, model, color, month and year of registration, mileage, main features, transmission, kW/hp, and vehicle condition (preferably with attached photos). With this information, we will be able to respond more quickly. CUSTOMER SERVICE OPENING HOURS: Monday to Friday: 8:30 am – 12:30 pm / 2:00 pm – 6:30 pm Saturday: 8:30 am – 12:30 pm

Condition: new, maximum load weight: 30,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,150 mm, loading space width: 2,410 mm, loading space height: 2,335 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, AGRILINER FL 9150 H2335 ? 51 m3 - F6/C2.2 PUDF - SAF FIX Gedpoy A Ugdjfx Adqobl Fifth wheel height, loaded/unloaded: 1170 / 1200 {mm} * SAF axles with disc brakes, 430 mm diameter, ET 120 * Air suspension with conventional control – level control valve * ABS 2 sensors (2S2M) ISO 7638 connector, integrated stability system * Automatic lowering during tipping process * Quick release valve for tipping * Air bellows pressure gauge 10 bar * Make of anti-lock braking system EBS Wabco * Front axle designed as lift axle * Automatic control for lift axle via 6 x 385 / 65 R 22.5 Hankook regional tires * Satin-finished aluminium Speedline rims * TPMS device for monitoring tire pressure and temperature in compliance with R141 regulations * Aluminium drop legs * EC underrun protection, manually foldable * Foldable side underrun protection * Power supply 24524N 2 x 7-pin + 15-pin connectors on bracket * Lighting: rectangular rear lights with bulbs, rear marker lights * Reverse warning signal STANDARD * Side marker lights in LED version * Front marker lights in LED version * 2 additional LED spotlights behind the last axle * HYVA tipping cylinder with eye mounting, stroke 6100 mm, tip-over warning signal * Tipping angle 44°; aluminium body - smooth side walls, inside wall thickness 2.2 mm * Floor thickness 6 mm * Internal width 2410 mm * Front wall 25° angled front, thickness 5 mm * Universal door with double bar locks, foldable upper crossbar * Each door leaf with one grain slide * Pneumatic automatic pendulum frame release with 4 hooks * HYFIX body locking device * Removable access ladder at the rear * Shovel holder / quantity: 2 external shovel holders * Ladder rungs inside the body / position: left front corner * Rolling tarpaulin system: white transparent stripe, side tensioning straps, round aluminium roof bows * Tarpaulin colour mid-grey PVC 650 gr/m * Platform at the front wall / on the front wall * Ladder under the body * Vehicle paint: chassis RAL 9005, body RAL 9005

Condition: new, functionality: fully functional, empty load weight: 6,040 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space length: 9,382 mm, loading space width: 2,464 mm, loading space height: 2,192 mm, loading space volume: 52 m³, total length: 10,823 mm, total width: 2,550 mm, total height: 3,828 mm, suspension: air, tire size: Dunlop 385/65 R22,5, tire condition: 100 %, wheelbase: 1,310 mm, color: white, Year of construction: 2026, Equipment: ABS, New vehicle – Immediately available – 3-axle tipping semi-trailer – Large-capacity aluminium body – 52 m³ – with centrally divided combination tailgate and aluminium package (aluminium rims, aluminium landing legs, and aluminium air tank). For sale is a new 3-axle tipping semi-trailer with a 52 m³ aluminium large-capacity body, configured for use in agriculture, construction, or recycling. Technical Data (Equipment) • Body dimensions: approx. 9,400 x 2,200 x 2,500 mm • Capacity: approx. 52 m³ • Coupling height: approx. 1,150 mm (unladen) • Unladen weight: approx. 6,040 kg (without spare wheel) • Body floor: 7 mm aluminium • Side walls: 2.1 mm aluminium Gbjdpfoyval Djx Adqol • External rear door/combination doors, centrally divided with additional safety latching • 2x grain chutes • Pneumatic 4-point hook locking system • Additional manual locking bolts • Double swing bearing Corrosion Protection/Paint • Body painted in RAL 9010 Pure White • Chassis metallized with a zinc/aluminium coating (5-year warranty against rust) • Chassis painted in RAL 9005 Deep Black Axle Unit • SAF INTRADISC CD Ø430 ET120 disc brakes • Lift axle on 1st axle • Traction aid on 1st axle Tyres / Wheels • 6 tyres: 385/65 R 22.5 Dunlop SP 247 (road version) • No spare wheel • Aluminium wheels Alcoa Dura Bright • Wheel nut covers in plastic chrome finish or stainless steel Chassis Equipment • Frame made of S 700 steel • Drop-down landing legs, aluminium (Manufacturer: JOST) • Manually foldable, spring-assisted aluminium underrun protection • Aluminium side underrun protection according to ECE regulations • KNORR BREMSE pneumatic system ILVL • TPMS tyre pressure monitoring system • Aluminium air tanks • Lighting 24V ASPÖCK FULL LED ECOLED II • 2 reversing lights • 2 wheel chocks • Mudflaps on rear fenders • Load pressure gauge • Holder for broom and shovel on side, including broom and shovel • Rear skirt (trailer apron) Reisch • 3 m access ladder on chassis side • Toolbox • Water tank Hydraulics • HYVA high-pressure 250 bar front-lift cylinder • Hydraulic connecting hose on semi-trailer • Pressure port: Hyva 1" coupling Body Accessories • Steel standing platform with access to both left and right front • 3 x adjustable crossbars including lashing straps • 3 x longitudinal tarpaulin bars integrated into the cover • PVC rolling tarpaulin, 900 g/m² quality • Tarpaulin colour: white • 1 work light in the body, operable from outside • HYFIX hold-down device on underside of the body Availability: New vehicle – ready for immediate collection from stock Delivery from: 07368 Remptendorf

Condition: new, mileage: 7 km, power: 390 kW (530.25 HP), first registration: 02/2026, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2026, Equipment: AdBlue, air conditioning, central locking, cruise control, fridge, onboard computer, parking air conditioner, parking heater, retarder, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Windscreen - Cabin - Sleeper cab - Sideskirts - Auxiliary heater - Preheating automation = Comments = Daf XG+ 530 4x2 - New - Retarder - Night air conditioning - 2x tanks - Air horn - 3 years warranty Model Year: 2026 - New Godpfoyrq R Ajx Adqebl Mileage: 7 km Good specification Retarder Night air conditioning 2x tanks Full spoiler Air horn Fridge NEW! = Further Information = Front axle: Steered; Tire tread left: 100%; Tire tread right: 100%; Suspension: leaf suspension Rear axle: Twin tires; Left inner tire tread: 100%; Left outer tire tread: 100%; Right inner tire tread: 100%; Right outer tire tread: 100%; Suspension: air suspension Number of cylinders: 6 General condition: very good Technical condition: very good Optical condition: very good Please contact VAEX The Truck Traders for more information.