Silo semitrailer

KÄSSBOHRER SSL 31 - 35 - 38

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Godpfox Nufyex Altobn Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, MENCI SEMI-TRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x H 2,000 mm Floor: 6 mm Rear Floor: 8 mm Unladen Weight: 6,650 kg GVW: 39,000 kg Description, Version & Accessories - 3rd steering axle SAF with disc brakes Ø430 (ET120) 2/2 - 1st axle with automatic lifting - CRAMARO hermetic electric tarpaulin type C (2023) with cover - Stainless steel toolbox 90x50x50 cm - Toolbox 90x50x25 cm - Complete ADR kit + A & R plates - Pressure gauge - Electric motovibrator operated by remote for cover system - PROMETEON 385/65 R 22.5 tyres - Steel rim 385/65 R 22.5 OFFSET 0/120 - Remote control for CRAMARO tarpaulin - Additional rear LED work light - Painted hubs - Full LED rear lighting - TPMS (Tire Pressure Monitoring System) - Hub color: RED RAL 3020 - Tarpaulin cover color: BLUE RAL 5002 - Tarpaulin height at bows H=300 mm - Cover with ADR tarpaulin - 3 access steps - Anti-wear triangles Gsdpsvzh T Aefx Altobn Chassis in steel, body in alloy Standard Configuration: - Steel chassis - Pneumatic suspension with manual height adjustment valve - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and load-sensing valve - Electrical system according to A.D.R. regulations - Aluminum air tanks, pneumatic quick suspension release device - Tipping system with front 5-stage telescopic cylinder - Pneumatic parking brake - Descent safety valve, double-acting piston hydraulic system with gate valve - Front ladder and removable ladder over the mudguards - 2 towing eye holes on rear underrun protection bar hinge FINANCING OR TAILORED LEASING OPTIONS AVAILABLE ON SITE. From 24 up to 96 installments, also with zero down payment. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL NAPLES HEADQUARTERS DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 BRANCH OPENING HOURS: MONDAY–FRIDAY 8:30/19:00 - SATURDAY 08:30/14:00 WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES, INCLUDING: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s - Limited Edition - 660 S Semi-Trailer - Refrigerated Semi-Trailer – Lamberet - Schmitz Isuzu - Fixed Box - Crane - Tipper - 4 axle - Rear 4 Axle - Tway - T-Way-540- 460 hp - Xway - X-Way - Three-Way - V8 - Scania - Frost Edition Curtain Sider - Box Body - Tail-lift Body - Refrigerated Unit - Insulated With Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies regarding technical specifications, options or features that may in some cases differ from those described. Please verify the specific features of the vehicle.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Gjdpfex Nuf Hsx Altjbn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: used, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2022, next inspection (TÜV): 02/2027, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,920 mm, Year of construction: 2021, Equipment: ABS, KÄSSBÖHRER STB CT11 SILO SEMI-TRAILER * HEROSE safety valve, 2 bar operating pressure * Impact protection * Pressure gauge with display range * Discharge method from the gas phase * -40/+80°C temperature range * Draining/emptying * FLUID GROUP 2 / AIR / Dust-proof / Granular goods ----* KNORR-BREMSE TEBS/ABS/TBM * BPW axles * 1st axle can be lifted ----* Tire size: 385/65R22.5 * Technical total weight: 39,000 kg * Tare weight: 4,670 kg * Overall length: 9,670 mm Gedpfx Aley S Nznjtobn * Year of manufacture: 2021 * Next inspection (SP) due: 08.2026 * Internal inspection due: 12.2026 ----Vehicle number/Vehicle: 12072----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We will be happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. In addition, we can offer you the following services for an extra charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM 8040 mm wheelbase 385/65R22.5 39000 kg

Condition: new, machine/vehicle number: efdaf8862775f9506d97b86a5, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front panel, patented 24 t, 2-speed landing gear, single-sided operation, with straight base, without displacement compensation 2 wheel chocks with holders Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface stone-repellent With anti-spray mud flaps only on the last axle 1 tarp rod with holder 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded piping for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver "TPMS" Tire pressure monitoring system according to ECE R 141, display via the towing vehicle, through EBS, no truck installation (requirement must be present in the truck, only on primary tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, "flashing side marker lights" 2 white position lights at front 2 white/red lane guidance lights at rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant material, headboard 5 mm thick, with external side walls made of 30 mm hollow-chamber profiles, cleanly welded, with bulk material-repellent upper beam profile. Internal step at headboard (not in combination with Cramaro). Shovel and broom holder on the outside of the headboard. Greenline – conical and aerodynamic body design Membrane – tailgate Tailgate pendulum mounted with double hinge and two-wing door split 1/2 to 1/2, top with swing bracket, with one grain chute per door. Tailgate with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with access, connection plate for air/electric and brake, with generous clearance for best possible operability. Gsdpfx Alji Ri Ihjtsbn Roll tarp stows to right side (when viewed from rear), with central locking to the left (from rear) Country of registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paintwork Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, maximum load weight: 30,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,150 mm, loading space width: 2,410 mm, loading space height: 2,335 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, AGRILINER FL 9150 H2335 ? 51 m3 - F6/C2.2 PUDF - SAF FIX Fifth wheel height, loaded/unloaded: 1170 / 1200 {mm} * SAF axles with disc brakes, 430 mm diameter, ET 120 * Air suspension with conventional control – level control valve * ABS 2 sensors (2S2M) ISO 7638 connector, integrated stability system * Automatic lowering during tipping process * Quick release valve for tipping * Air bellows pressure gauge 10 bar * Make of anti-lock braking system EBS Wabco * Front axle designed as lift axle * Automatic control for lift axle via 6 x 385 / 65 R 22.5 Hankook regional tires * Satin-finished aluminium Speedline rims * TPMS device for monitoring tire pressure and temperature in compliance with R141 regulations * Aluminium drop legs * EC underrun protection, manually foldable * Foldable side underrun protection * Power supply 24524N 2 x 7-pin + 15-pin connectors on bracket * Lighting: rectangular rear lights with bulbs, rear marker lights * Reverse warning signal STANDARD * Side marker lights in LED version * Front marker lights in LED version * 2 additional LED spotlights behind the last axle * HYVA tipping cylinder with eye mounting, stroke 6100 mm, tip-over warning signal * Tipping angle 44°; aluminium body - smooth side walls, inside wall thickness 2.2 mm * Floor thickness 6 mm * Internal width 2410 mm * Front wall 25° angled front, thickness 5 mm * Universal door with double bar locks, foldable upper crossbar * Each door leaf with one grain slide Gbsdpfx Aloy A Ugdstsn * Pneumatic automatic pendulum frame release with 4 hooks * HYFIX body locking device * Removable access ladder at the rear * Shovel holder / quantity: 2 external shovel holders * Ladder rungs inside the body / position: left front corner * Rolling tarpaulin system: white transparent stripe, side tensioning straps, round aluminium roof bows * Tarpaulin colour mid-grey PVC 650 gr/m * Platform at the front wall / on the front wall * Ladder under the body * Vehicle paint: chassis RAL 9005, body RAL 9005

Condition: new, maximum load weight: 29,740 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,460 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2026, Equipment: ABS, Chassis * 1,150 mm fifth wheel height unloaded * Welded construction, weight-optimized from high-strength S700 steel * Side impact protection made of aluminum profiles according to ECE 73 * 2 plastic wheel chocks * Foldable underrun protection at the rear * SAF Hercules 2-speed transmission supports, full load * Aluminum ladder L = 2,840 mm * Toolbox - 165 L * Water tank - 30 L * Shovel and broom on the chassis, above the fenders * Dust bag (1 pc.) * Extendable ladder at the rear * Bellows pressure gauge * Binotto hydraulic cylinder, eye-mounted above Axles and Suspension * SAF disc axles 3x9000 kg 22.5 INTRADISC CD * 3 rigid axles * A-axle as lift axle * 6x ABERG POLISHED aluminum rims 22.5x11.75 ET-120 * Tire pressure monitoring system Electrics * Aspöck LED lighting - ECOLED II * LED reversing lights - 2 pcs. * LED work lights on the side guard - 2 pcs. * 2x7-pin + 1x15-pin with EBS connection * With flashing side marker lights Body * Volume 51m3 * Front wall inclined at 20 degrees * Side walls, internal thickness 2.5 mm, fully welded * Two-wing aluminum combination door, aluminum (1/2 + 1/2) vertical with portal beam * 2 grain slides * Bottom tension locks * Pallet-width design * 5 mm floor * Floor cross member spacing 360 mm * Tension chain between the side walls * Operator's station on the chassis frame, access in FR on the left (driver's side) * PVC roll-up tarpaulin 680 g/m² with quick-release fastener and aluminum winding tube. Center tube welded into the tarpaulin. Painting * Chassis paint RAL 7021 (black-gray) * Body paint RAL 6018 (yellow-green) Godpev U Hwtofx Altebn * Tarpaulin color similar to RAL 3002 CARMINE RED

Condition: new, functionality: fully functional, empty load weight: 6,040 kg, maximum load weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, loading space length: 9,382 mm, loading space width: 2,464 mm, loading space height: 2,192 mm, loading space volume: 52 m³, total length: 10,823 mm, total width: 2,550 mm, total height: 3,828 mm, suspension: air, tire size: Dunlop 385/65 R22,5, tire condition: 100 %, wheelbase: 1,310 mm, color: white, Year of construction: 2026, Equipment: ABS, New vehicle – immediately available – 3-axle tipper semi-trailer – aluminum large-volume body – 52 m³ – with combination flap, centrally divided, and aluminum package (aluminum rims, aluminum landing legs, and aluminum air tank, as well as a vibrator). For sale is a new 3-axle tipper semi-trailer with an aluminum large-volume body with 52 m³ – configured for use in the agricultural, construction, or recycling sectors. Technical data (equipment) • Body: approx. 9,400 x 2,200 x 2,500 mm • Volume: approx. 52 m³ • Saddle height: approx. 1,150 mm (unladen) • Tare weight: approx. 6,040 kg (without spare wheel) • Body floor: 7 mm aluminum • Side walls: 2.1 mm aluminum • Outward-opening tailgate/combination doors, centrally divided, with additional locking mechanism • 2x grain slide • Pneumatic 4-point hook locking system • Additional manual tensioning closures • Double pendulum bearing Corrosion protection/paint • Body (tipper) painted in RAL 9010 pure white • Chassis metallized with a zinc/aluminum coating, 5-year guarantee against rust • Chassis painted in RAL 9005 deep black Axle assembly • SAF INTRADISC CD Ø430 ET120 disc • Axle lift on the 1st axle • Starting aid on the 1st axle Tires/rims • 6-tire configuration: 385/65 R 22.5 Dunlop SP 247 (road version) • Without spare wheel • Aluminum rims Alcoa Dura Bright • Wheel nut cover in plastic chrome or in stainless steel Chassis equipment • Frame made of S 700 steel • Landing leg supports, aluminum (manufacturer: JOST) • Underrun protection made of aluminum, manually foldable, spring-supported • Lateral underrun protection made of aluminum according to ECE regulations Godpfx Alsy Ufwdjtebn • KNORR BREMSE pneumatic system ILVL • Tire pressure monitoring system TPMS • Air reservoir made of aluminum • Lighting 24V ASPÖCK FULL LED ECOLED II • Reversing lights 2 pieces • Wheel chocks 2 pieces • Mud flaps on the rear fenders • Loading pressure gauge • Broom and shovel holder on the side, including broom and shovel • Rear apron, semi-trailer apron Reisch • Extension ladder 3 m on the side of the chassis • Toolbox • Water tank Hydraulics • HYVA high-pressure 250 bar front lifting cylinder • Hydraulic connection hose on the semi-trailer • Pressure connection: Hyva 1" coupling Body accessories • Steel platform with access ladder on the front left and right • 3x adjustable crossbars including lashing straps • 3x tarpaulin longitudinal bars integrated into the tarpaulin • PVC roll tarpaulin in 900g/m² quality • Vibrator installed in the body floor • Tarpaulin color: white • 1x work light in the body, operable from the outside • HYFIX retainer on the underside of the body Availability: New vehicle – immediately available in stock Delivery from: 07368 Remptendorf

Condition: new, maximum load weight: 33,380 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Kässbohrer SPJ 3 Platform Trailer – Versatile Use | Robust | from €35,500 New vehicle – individually configurable for your specific application. Robust platform trailer designed for the universal transport of various goods. Engineered for high payload capacity, durable construction, and maximum everyday practicality. Highlights • Universal platform trailer • High payload with stable frame construction • BPW axles with air suspension • EBS braking system with stability control • Versatile lashing and securing options • Ideal for construction, industry, machinery, and general cargo transportation Technical Specifications • Axles: 3 axles • Gross weight: 39,000 kg • Axle load: 27,000 kg • Fifth wheel load: 12,000 kg • Platform length: varies depending on configuration • Speed: 80 km/h • Chassis: air suspension with lifting/lowering function Standard Equipment • High-strength steel frame construction • Platform floor designed for high point and surface loads • Multiple lashing points for securing cargo • BPW axles with drum brakes • WABCO / KNORR EBS brake system (2S/2M) • Electronic air suspension • LED lighting system according to EU regulations • Rear underrun protection as per ECE Included Options • Spare wheel holder • Toolbox Gjdpfxsypa Daj Altobn • Side underrun protection • Lashing rings / lashing points as required • Warning signs and reflectors according to EU regulations • Preparation for additional bodies or special solutions Further equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, maximum load weight: 35,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, Kässbohrer Tank Container Chassis NEW | 20 ft | Also Available in 30 ft Version | from €23,500 New vehicle – customizable to your specific application. High-quality tank container chassis designed for the safe transport of 20-ft tank containers. Also available as a 30-ft version – configuration according to customer specifications possible. --- Highlights • Suitable for 1 × 20 ft tank container • Also available as a 30-ft tank container chassis • Very low tare weight (approx. 3,200 kg) • Robust, durable chassis with 10-year corrosion protection • Proven Kässbohrer quality for hazardous goods and tank logistics --- Technical Data • Gross vehicle weight: 39,000 kg • Axle load: 27,000 kg Gbsdpfsypa Nvjx Alton • Kingpin load: 12,000 kg • Fifth wheel height: 1,150 mm • Overall length: 8,160 mm • Total width: 2,550 mm • Unladen weight: approx. 3,200 kg • Axle spacing:  • 1st–2nd axle: 1,310 mm  • 2nd–3rd axle: 1,410 mm --- Standard Equipment • High-strength steel construction from S700 MC • KTL-coated chassis with 10-year corrosion protection • Container locks (JOST) for:  • 1 × 20 ft tank container  • Swap tanks (7,150 / 7,450 / 7,820 mm) • BPW axles, air suspension, disc brakes (3 × 9 t) • WABCO EBS brake system (2S/2M) including ABS & RSS • LED lighting system according to UN ECE R48 • Side underrun protection according to ECE R73 • Fixed underrun protection according to ECE R58.3 • Mechanical JOST landing legs (24 t) --- Included Options / Equipment • TPMS tire pressure monitoring system (WABCO OptiTire) • Aluminum rims (Kässbohrer selection) • ADR preparation (ADR compliant, T9 document to be provided by customer) • Hose carrier with stainless steel cover • Side and rear markings according to EU regulations • Fire extinguisher box • Axle load indicator gauge • Mudguards & spray protection complying with EU standards --- Suitable for Tank Container Transport • Chemical & hazardous goods logistics • Bulk liquids in ISO tank containers • National & international transport • Hauliers operating 20-ft and 30-ft tank containers --- Further equipment and customization available at any time – we configure your vehicle exactly to your specifications. Sample photo. Equipment may vary depending on configuration.