Refrigerant compressor

Atlas Copco XRXS 567 CD Drillair

Condition: excellent (used), Year of construction: 2025, Intended use: Construction Unladen weight: 3,757 kg Engine make: Cummins QSB6.7 Throughput: 20 m³/h Technical condition: very good Optical condition: very good Working pressure: 25 bar Knsdpfxjytm A De Apyob Please contact the Sales Department for further information.

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine transporter/platform lift transporter - FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - FH high safety long-distance cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment under the bunk - Air suspension on front axle(s) - Transmission/I-Shift operation via control unit on driver's seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco cruise control (cruise control) including brake cruise - Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control - Adaptive Cruise Control (ACC) with collision warning and emergency braking - Lane keep assist - Side collision avoidance and turning assistant (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE body for platform lift and construction machinery transport with hydraulic loading ramps Includes 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Length approx. 9,050 mm useable length - External width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, box section design - Short crossmember spacing for high point loads - Rear end tapered for low approach angle - Outer frame profile 90° - Front bulkhead reinforced version - Storage box inside front lower area - Grated floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame - Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t - 4 lashing points 8 t recessed at rear (left/right/center/center) - 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable ramps, both ramps laterally adjustable - Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay - Sturdy locking bar as transport security (optionally with belt system) - 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab - Ramp and support operation by electro-hydraulic system - Control via wireless remote and emergency controls on manifold - Control manifold mounted in stainless steel toolbox on chassis side - Superwinch winch 8.2 t with approx. 20 m steel cable - Access steps with handrail right and left for deck access - 5 stainless steel toolboxes in drawer version, with lighting as optional extra - Side skirts as per sample photos (green vehicle) as optional extra - Body coating KTL - Ball-type trailer hitch at rear, 3.3 t - 4 LED work lights Kedpfx Apew Itmlsyjnb - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights on outer chassis as perimeter lighting - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).

Condition: used, Year of construction: 2013, operating hours: 4,458 h, Intended use: Construction Unladen weight: 6,560 kg Engine make: Caterpillar C 18 Kjdpoytuzujfx Apyjnb Throughput: 38.9 m³/min Working pressure: 25 bar Please contact the Sales Department for further information.

Condition: used, Year of construction: 2007, operating hours: 7,075 h, Intended use: Construction Knsdpfxjytuyko Apysb Unladen weight: 6,200 kg Engine brand: Caterpillar C 13 Throughput: 27.7 m³/min Compressor type: Screw compressors Working pressure: 25 bar For further details, please contact the Sales Department.

Condition: used, Year of construction: 2006, operating hours: 3,117 h, Intended use: Construction Unladen weight: 8,200 kg Engine make: Caterpillar C18 Ksdsytutkspfx Apyenb Throughput: 33.6 m³/min Loading compartment dimensions: 450 x 225 x 224 cm Serial number: YA306337260603832 Compressor type: Screw compressor Operating pressure: 30 bar Please contact the Sales Department for further information.

Condition: used, Year of construction: 2012, operating hours: 5,751 h, Intended use: Construction Unladen weight: 6,500 kg Engine brand: Caterpillar C13 Ksdpfx Apjytur Tsyonb Throughput: 27.7 m³/min Loading compartment dimensions: 394 x 218 x 241 cm Compressor type: Screw compressors Working pressure: 25 bar Please contact our Sales Department for further information.

Condition: used, Year of construction: 2008, operating hours: 4,040 h, Intended use: Construction Kedpfxeytwxvs Apyenb Unladen weight: 7,785 kg Engine make: Caterpillar C15 Throughput: 33.1 m³/min Dimensions of the loading area: 742 x 229 x 254 cm Compressor type: Screw compressors Working pressure: 24.1 bar Please contact the Sales Department for further information.

Condition: used, Year of construction: 2013, operating hours: 3,874 h, Intended use: Construction Knjdpfjy Elcbsx Apyob Unladen weight: 6,200 kg Engine make: Caterpillar C 13 Throughput: 27.7 m³/min Working pressure: 25 bar Please contact the Sales Department for further information.

Condition: used, Year of construction: 2012, operating hours: 11,982 h, Intended use: Construction Unladen weight: 6,800 kg Engine brand: Caterpillar C13 Throughput: 28 m³/min Cargo compartment dimensions: 444 x 210 x 245 cm Compressor type: Screw compressors Kjdpfx Aoytuxajpyenb Working pressure: 25 bar Please contact the Sales Department for further information.

Condition: used, Year of construction: 2010, operating hours: 3,177 h, Intended use: Construction Unladen weight: 5,897 kg Engine make: Caterpillar 3406 Throughput: 30.3 m³/m Dimensions of the loading area: 508 x 225 x 228 cm Compressor type: Screw compressors Working pressure: 24.1 bar Please contact the Sales Department for further information. Knsdpfeytwdljx Apysb