Silo semitrailer

Feldbinder KIP 52.3 Kippsilo 52 m³ eigene Hydraulik

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Knodpfx Aex Nufyshqjb Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Kjdpfx Ahex Nuf Hsqenb Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: used, mileage: 899,850 km, power: 427 kW (580.56 HP), first registration: 08/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, * 6260 - Vehicle ID for telephone inquiries * Highline * Automatic transmission, retarder, lane keeping assist, attention assist, differential lock, hill start assist, ACC adaptive cruise control, leather multifunction steering wheel, driver comfort leather seat (heated and ventilated), passenger leather seat (air-suspended), 2 bunks, sunroof, CB radio, radio/navigation/Bluetooth, air conditioning, auxiliary air conditioning, auxiliary heater, air-suspended cab, light bar with 4 additional headlights, air horn, sun visor, full spoiler, side skirts, 2 fuel tanks (500 + 700 liters), AdBlue, aluminum wheels, air suspension on the rear axle * Serviced according to schedule * Particle filter replaced on 07.11.2025 at 848,716 km * Wheelbase: 3.75 m * Front axle tires: 385/55R22.5 (7 / 7 mm) * Rear axle tires: 315/70R22.5 (15 / 15 / 16 / 16 mm) ----our email address: Knjdpey Sq Sbsfx Ahqob our service for you: - Procurement of short-term or customs registration plates - Transportation/delivery throughout the EU - Customs clearance of vehicles to third countries WhatsApp for English, German, Russian and other languages:

Condition: used, machine/vehicle number: W09334R1GYTF07633, axle configuration: 3 axles, first registration: 01/2000, total length: 11,000 mm, total width: 2,500 mm, total height: 3,600 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2000, Tank Material tank: Aluminium Compartment capacity (liters): 38000 Number of compartments: 1 Capacity (liter): 38000 Powder: ✓ Fuel: ✓ Aluminium tipping powder tank, Capacity 38000 litres, 1 Compartment, Max. working pressure 2.0 bar, Test pressure 4.0 bar, ABS, Air suspension, Ror axles, Disc brakes, Allot wheels, Shipment dimensions 1100x250x360 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Ror Brakes: disc brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.490 kg Knsdpfxsu H Hwuo Ahqob Carrying capacity: 32.510 kg GVW: 39.000 kg Identification Registration number: C085044 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, empty load weight: 7,900 kg, maximum load weight: 26,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/1986, loading space volume: 53 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air-suspended, lifting+lowering, ABS (anti-lock braking system), walkway, U-protection, rear support, aluminum side bumpers, supports, storage box Body: Tipping silo trailer approx. 53m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Knjdpfxjvhk Iie Ahqob - .

Condition: used, machine/vehicle number: 337, empty load weight: 5,840 kg, maximum load weight: 28,160 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 05/2009, loading space volume: 53 m³, suspension: air, tire size: 385/65 r22,5, color: white, Equipment: ABS, Disc brake EBS Kedjmftq Nopfx Ahqjnb Wheelbase 1,310 mm aluminum frame Rear support DC axles Aluminum rims Lifting and lowering device Next internal inspection 01/2026 Errors excepted