Tracked shovel

CATERPILLAR 259D3

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame Dedpjh Hm Thsfx Ad Decg -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: excellent (used), mileage: 268,805 km, power: 331 kW (450.03 HP), first registration: 09/2017, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 7,750 mm, fuel: diesel, brakes: retarder, color: silver, driver cabin: other, emission class: euro6, number of seats: 2, total length: 10,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electric window regulation, retarder, traction control, = Additional options and accessories = - Additional steering axle - Air conditioning (automatic) - Power take-off (PTO) - Sun visor = Remarks = Crane Hours: 5860 uur Number of hydraulic extensions: 8+6 Number of manual extensions: 1 Number of support legs: 4 Number of extra functions: 2 Remote control: ✓ Load Hook: ✓ Rotator: × Very nice Scania G450 equipped with a Palfinger 92tm crane! In addition to the options already mentioned, it has: -Retarder -Automatic -Air conditioning -8x4 triple -Palfinger PK92002-SH-G -8x hydraulically extendable -PJ125 E Flyjib -6x Hydraulically extendable -1x Hand part etc etc This truck is ready for its next job! = More information = General information Cab: half sleeper Registration number: BD-462-F Technical information Number of cylinders: 6 Engine capacity: 12.742 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 9500 kg Rear axle 2: Max. axle load: 9500 kg Rear axle 3: Lift axle; Max. axle load: 8000 kg Weights Empty weight: 26.840 kg Carrying capacity: 9.260 kg GVW: 36.000 kg Max. towing weight: 50.000 kg Functional Crane: Palfinger PK92002-SH-G Plus Jib 125e, year of manufacture 2016 Maintenance APK (MOT): tested until 03/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Dcsdpoyt Snfsfx Ad Deg Website: Email:

Condition: used, mileage: 53,857 km, power: 270 kW (367.10 HP), first registration: 06/2003, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro3, total width: 2,680 mm, total height: 3,750 mm, Equipment: parking heater, Liebherr UTM 735 Dcedpfx Adew H Hwvj Dsg - Crane: LTM 1055/1 - Year of manufacture: 2003 - 22,439 operating hours (carrier chassis) - 18,883 operating hours (crane superstructure) - 53,857 km mileage - 4 x hydraulic boom extension - 16 m jib - Hydraulic steering - 12 t additional counterweights - LED beacon lights - Technical inspection due: - Safety inspection due: 01.2026 - Tyres: 445/95 R 25 Subject to errors and prior sale. Internal vehicle number: 11218 WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp.

Condition: as good as new (ex-display), functionality: fully functional, gearing type: converter, fuel type: diesel, Year of construction: 2023, operating hours: 31 h, Equipment: adjustable boom, air conditioning, cabin, pallet forks, CATERPILLAR 444, year 2023, never used, 31 hours, front quick coupler with forks and 4-in-1 bucket, telescopic rear arm with hammer circuit, quick coupler with 4 buckets. Dcsdpey E Ipwjfx Ad Djg

Condition: used, mileage: 129,754 km, power: 368 kW (500.34 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2028, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, crane, Internal vehicle number: VTC30026 Dcjdpfxjyrv Tcs Ad Deg German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions [mm]: 6400 x 2550 Palfinger PK53002 SH 1159 operating hours 4m – 10,800 kg 6m – 7,600 kg 8m – 5,700 kg 10m – 4,450 kg 12m – 3,650 kg 14.5m – 3,050 kg ELBO PCS trailer (included in vehicle price) EUR 17,900 Ref. No.: VTC30018 Year of manufacture: 2023 Current weight: 4,650 kg Permissible payload: 13,350 kg Overall dimensions: 8,250 x 2,550 mm Loading area dimensions: 6,400 x 2,550 mm Tyres: 235/75 R17.5 Suspension: Air suspension Brakes: Drum brakes Hydraulic ramps Errors excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly through our company. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, functionality: fully functional, Year of construction: 2015, SOCAGE platform mounted on NISSAN CABSTAR 400 NT used Dcedpoxxyi Tofx Ad Dsg 20 m Year 2015

Condition: like new (used), functionality: fully functional, mileage: 5 km, power: 14.7 kW (19.99 HP), gearing type: automatic, fuel type: diesel, color: blue, overall weight: 1,520 kg, operation weight: 1,520 kg, number of seats: 1, shovel volume: 0.025 m³, digging bucket width: 380 mm, Year of construction: 2021, operating hours: 7 h, Equipment: additional headlights, all wheel drive, cabin, hydraulics, rubber tracks, standard shovel, Gekko Network KG in Gersthofen – Your supplier for vehicles of all kinds. You can reach us by phone at 0821/453 467 70, via email, or in person at Wernher-von-Braun-Str. 2, 86368 Gersthofen. New Kingway CX15 B Mini Excavator with Perkins engine, joystick controls on the seat, rain and sun canopy, side boom operation, including 3 buckets! Manufacturer: Perkins; Model: CX15 CP with cab and articulated boom including Perkins engine; Year of manufacture: 2021; Weight: 1,520 kg; Engine power: 14.7 kW; Operating hours: 7 h Technical specifications: Model: CX 15B, Power (HP): 19 HP, Fuel: Diesel, Track width (mm): 950 mm, Digging depth (mm): 1,950 mm, Total machine weight (kg): 1,580 kg, Hydraulic connections for: breaker, auger, ripper tooth, log grapple, rake. Includes: 3 buckets (300/500/800 mm). Basic information Bucket capacity: 0.025 m³ Bucket width: 380 mm Boom length: 1,560 mm Stick length: 793 mm Hydraulic oil tank capacity: 13 l Hydraulic system Hydraulic pump model: DHP0010 Max. oil pressure: 17 MPa Hydraulic pump flow rate: 28.5 l/min Performance Rotation speed: 10 rpm Gradeability: 25% Bucket breakout force: 9.6 kN Boom force: 8.5 kN Engine Type: PERKINS Rated power: 14.7 kW at 2,200 rpm Dcodpoklwvcsfx Ad Dog Max. torque: 51.8 Nm Number of cylinders: 3 Cooling: Air Working range Max. digging radius: 3,225 mm Max. digging depth: 1,650 mm Max. digging height: 2,740 mm Max. dumping height: 1,970 mm Max. raised dozer blade height: 170 mm Max. lowered dozer blade depth: 220 mm Boom swing angle: 50° left / 70° right Dimensions Track length: 1,290 mm Ground clearance: 405 mm Counterweight swing radius: 850 mm Track width: 180 mm Track height: 320 mm Height (without/with canopy): 1,570/2,200 mm Included tools / accessories 3 buckets Workshop toolkit Other information Joystick controls Ideal for construction, electrical, plumbing, repair, and service companies in related fields Minimal space requirement due to additional swing arm Manufactured based on and within European engineering standards, suitable for many conditions. Please note that some vehicles from our portfolio may be stored externally and not immediately available for on-site inspection. Please always contact us in advance at 0821/453 467 70. Our complete range is available on request. Price excluding VAT – VAT deductible

Condition: used, machine/vehicle number: XLRAC85MC0G012278, mileage: 309,000 km, first registration: 01/2013, tire size: 315/80 R22.5, axle configuration: 8x2, color: other, suspension: other, total length: 9,900 mm, total width: 2,500 mm, total height: 4,100 mm, loading space length: 5,700 mm, loading space width: 2,500 mm, Year of construction: 2013, Equipment: crane, = Additional options and accessories = Dodpfx Adsu H Irgo Dscg - Sper = Remarks = Cabin Right hand drive: ✓ Chassis Chassis height: 100 cm Wheelbase: 205 cm (1-2) 300 cm (2-3) 140 cm (3-4) Fuel tank capacity: 400 L Brand trailer coupling: VBG Structure Platform: ✓ Tank Fuel: ✓ Crane Number of hydraulic extensions: 6 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Maximum crane load capacity : 18000 kg at 3.0 meters, 16700 kg at 3.9 meters, 14.600 kg at 4.7 meters, 10.800 kg at 6.2 meters, 8100 kg at 8.0 meters, 6400 kg at 9.9 meters, 5200 k Maximum crane reach: 16.30 m NON DUTY FREE VEHICLE, REQUIRES CUSTOMS CLEARANCE // RIGHT-HAND DRIVE // Hiab XS855 EP6 Hipro loading crane with hook, Max horizontal reach 16.3 meters, Max load capacities 18000 kg at 3.0 meters, 16700 kg at 3.9 meters, 14.600 kg at 4.7 meters, 10.800 kg at 6.2 meters, 8100 kg at 8.0 meters, 6400 kg at 9.9 meters, 5200 kg at 11.9 meters, 4350 kg at 14.1 meters, 3750 kg at 16.3 meters, 6 Hydraulic extensions, 4 support legs, radio control, Year of construction 2013 // Truck 8x2, RHD, Automatic gearbox, Diff. lock, Adblue, Euro 5, Steel front suspension, Air rear suspension, 3rd axle lift and steering axle, Day cabin, Digital tachograph, Shipment dimensions 990x250x410 cm = More information = Axle configuration Tyre size: 315/80 R22.5 Axle 1: Steering; Tyre profile left: 45%; Tyre profile right: 55%; Suspension: leaf suspension Axle 2: Steering; Tyre profile left: 50%; Tyre profile right: 55%; Suspension: leaf suspension Axle 3: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 65%; Suspension: air suspension Axle 4: Lift axle; Steering; Tyre profile left: 65%; Tyre profile right: 50%; Suspension: air suspension Weights Empty weight: 13.500 kg Carrying capacity: 20.500 kg GVW: 34.000 kg Functional Crane: Hiab XS855 EP6 Hipro, year of manufacture 2013, behind the cab Make of bodywork: Hiab Identification Registration number: PF63JUY = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, Year of construction: 2025, * Now available: Cangini Forestry Mulcher – Top Equipment We are pleased to offer you the Cangini Forestry Mulcher with excellent special features. Dcodpfxsxqvr Uj Ad Djg * Condition: Brand-new machine * Availability: Immediately from stock ----Why choose Zirndorfer-Maschinenpark?---- * Official authorized dealer for Bobcat & Montabert * Family business with over 45 years of experience * In-house expert workshop ensuring quality assurance * Wide range of new and used machines Financing, leasing, or hire purchase? No problem – through our partner banks we will find the right solution for you. Want to trade in your used machine? We are happy to accept your machine as a trade-in on fair terms. Attachments and accessories? We also offer additional attachments and suitable accessories on request. Export to EU or non-EU countries? We handle the process for you. ----Special equipment of the Cangini Forestry Mulcher---- * Electric flap ----Standard equipment---- * Double-acting auxiliary hydraulics * CE certification ----Rely on three generations of experience---- Zirndorfer-Maschinenpark e.K. – your partner for construction equipment. Contact us now to secure your customised offer. ----Legal Notice---- The information provided online is non-binding and serves as a description only. It does not constitute guaranteed features. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to change.

Condition: used, mileage: 566,271 km, power: 338 kW (459.55 HP), first registration: 01/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, low noise, navigation system, onboard computer, parking heater, traction control, permissible total weight: 18000kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , leaf air suspension, retarder, digital tachograph, fifth wheel coupling: JOST JSK 37 C, shunting coupling: ROCKINGER SK5, power take-off: MAN 650P with pump connection 1.00/1.24 1200 Nm, low noise: noise level 80 dB (92/97 EEC), MAN BrakeMatic, brake assistant: Emergency Brake Assist 2, electronic stability program ESP, traction control ASR, automatic climate control, stationary air conditioning, MAN Media Pack Navigation, Efficientcruise, additional heating: EBERSPAECHER D4S, driver's comfort seat, air-suspended driver's seat, driver's armrest, driver's seat heating, headlight range adjustment, radio: MAN Media Truck Advanced, AUX & USB connection: SD card reader, mobile phone preparation Bluetooth, Lane Guard System LGS, multifunction steering wheel, adjustable steering column, driver's lumbar support, 2 electric windows, electric sliding/tilting sunroof, fog lights, electric and heated exterior mirrors, curb mirror: right, heated wide-angle mirror, immobilizer, central locking. with remote control, tinted glass: side windows tinted according to B-pillar, differential lock at the rear, underbody protection: at the front, aero package, cool box, rotating beacon: yellow, work lights, ambient lighting, hill start assist: EasyStart, spare wheel holder, 1x15-pin connector, cup holder at the front, Efficientline 3 package, safety package Plus, decorative inlays in aluminum: brushed, cornering lights, carpet floor covering: on engine tunnel, cab insulated: NORDIC, telematics system, information and service system: MAN Vehicle Connectivity Manager (VCM), speed limiter: electronic 85 km/h + 1 km/h tolerance, voltage converter, front springs parabolic 7.5 t, rear springs air 13 t, instrument panel km/h 'High-Line colored', rear axle hypoid HY-1350, HY axle ratio i 2.53, control module for ext. Data exchange (KSM), air compressor 1 cylinder with Air Pressure Management (APM), controlled rocker arm brake (EVBec) 3-stage, flame start system, Tr Dedpfjwl S Tmjx Ad Decg