Open semitrailer with tarp

KRONE SD Plane Mega Edscha Hubdach 2x Liftachse

Condition: used, maximum load weight: 29,804 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2022, loading space length: 13,561 mm, loading space width: 2,480 mm, loading space height: 3,003 mm, total width: 2,550 mm, Year of construction: 2022, Equipment: ABS, Krone SD Curtain Mega Edscha Lifting Roof 2x Lift Axle (1st + 3rd Axle) Multilock Outer Frame Permissible total weight: 36,000 kg Unladen weight: 6,196 kg Payload: 29,804 kg Fifth wheel height unladen: approx. 985 mm BPW axles Lift axle: 1st and 3rd axles Air suspension Disc brakes Edscha sliding roof Lifting roof Hydraulic lifting roof with a total stroke of 500 mm, liftable separately at each of the 4 corner posts High-visibility tarpaulin, sliding curtain Sliding curtain on both right and left sides Njdpfox E Ib Hjx Afhswb Swing doors Side and rear underrun protection 2x telescopic landing legs Rear right access ladder Storage box left Storage box right Forklift accessible Metal bumpers Multilock outer frame ABS EBS ALB DIN EN 12642 Code XL Wheelbase: approx. 6,350 + 1,310 + 1,310 mm Loading area (LxWxH): 13,561 x 2,480 x 3,003 mm External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm Clear rear portal height: 2,785 mm Clear rear portal width: 2,480 mm (internal) Tyres: 435/50R19.5 on ALCOA alloy rims Tread depth left front: 7 mm Tread depth left middle: 10 mm Tread depth left rear: 5 mm Tread depth right front: 8 mm Tread depth right middle: 9 mm Tread depth right rear: 6 mm Additional equipment: Type: SD Suitable for tractor unit (limited to ISO 1726 – engine data required!) King pin to centre of support device: approx. 2,720 mm Fifth wheel height unladen: approx. 985 mm Double-T longitudinal beams and center rails as well as outer frame welded with crossbeams and outriggers Multilock outer frame: universal load securing points every 100 mm Front frame height: 80 mm (incl. floor and fifth wheel plate) 2” king pin Rear underrun guard according to EC directive Side guard according to EC directive Rear sliding access ladder Door retainers Two mechanical landing gears, 2 x 12 t, semi-circular with base plate Landing gear operation on one side, FR-right 3 axles with 9,000 kg load capacity each BPW axles, 19.5", with air suspension (total stroke 260 mm) and disc brakes (ET 120) Brake disc diameter: 370 mm With lift and lower function, incl. automatic ride height reset Load-dependent, fully automatic electronic lift axle control for 1st axle Load-dependent, fully automatic electronic lift axle control for 3rd axle Manual function at control console for forced lifting (starting aid as per Directive 97/27/EC) and forced lowering via rotary switch Attention: Reduced ground clearance in the area of the lift axle! Lift axle operation sequence: 3rd axle lifts first / lowers last Plastic wheel covers (mudguards) Splash protection according to EC directive Brake system according to ECE regulation 13 (incl. vehicle stabilization function) Spring-loaded parking brake Brake line connections at the front approx. 675 mm above platform Diagnostics via ISO7638 connector (EBS supply cable) Standard air connections ISO 1728 (palm couplings) Brake system manufacturer: Wabco EBS system, 2S/2M, 2 sensors on one axle Lighting and signal installation ECE 48 2 LED license plate lamps 2 LED outline marker lamps with rubber arm LED side marker lights with indicator function Electrical cable connections front approx. 450 mm above platform 24V, front with 7-pin socket DIN ISO 1185 7-pin socket DIN ISO 3731 front, for additional functions Also front 15-pin socket DIN ISO 12098 Multifunction rear lights Steel ram protection corners rear

Condition: used, maximum load weight: 29,804 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2022, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,914 mm, total width: 2,550 mm, Equipment: ABS, Krone SD Curtainsider Mega Edscha Lifting Roof 2x Lift Axle (1st + 3rd Axle) Multilock Outer Frame Perm. total weight: 36,000 kg, Nwjdpfjxwq Rfox Afheb Curb weight: 6,196 kg, Payload: 29,804 kg, Fifth wheel height unladen: approx. 985 mm, BPW axles, Lift axle: 1st and 3rd axle, Air suspension, Disc brakes, Edscha sliding roof, Hydraulic lifting roof with 500 mm total lift, individually raiseable at four corner posts, White safety belt tarpaulin, Sliding curtain, right and left, Rear portal doors, Side underrun protection right, left and rear, 2x crank supports, Rear access ladder on the right, Toolbox on the left, 2x toolboxes on the right, Forklift capable, Metal ram buffers, Multilock external frame, ABS, EBS, ALB, DIN EN 12642 Code XL, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, Loading area LxWxH: 13,620 x 2,480 x 2,914 mm, External dimensions LxWxH: 13,950 x 2,550 x 4,000 mm, Clear loading height at rear portal: 2,709 mm, Clear loading width at rear: 2,480 mm inside, Tyres: 435/50R19.5 on ALCOA aluminium rims, Tread depth tyres left front: 7 mm, Tread depth tyres left center: 8 mm, Tread depth tyres left rear: 6 mm, Tread depth tyres right front: 7 mm, Tread depth tyres right center: 8 mm, Tread depth tyres right rear: 6 mm, Additional equipment: Type: SD, Suitable for tractor unit (ISO 1726 limited – tractor vehicle data required!), Distance king pin to centre of landing gears approx. 2,720 mm, Unladen fifth wheel height: approx. 985 mm, Double-T longitudinal and centre beams as well as outer frame with crossmembers and outriggers welded, Multilock outer frame, universal load securing option every 100 mm, Front build height: 80 mm (incl. floor and fifth wheel plate), 2" king pin, Rear underrun protection according to EC directive, Side guard according to EC directive, Retractable step ladder at rear, Door holder, Two mechanical landing gears, 2 x 12 t, semi-round with base plate, Single-sided operation of landing gears, on front right side, 3 axles, each 9,000 kg axle load, BPW axles, 19.5", with air suspension (260 mm total travel) and disc brakes (ET 120), Brake disc diameter: 370 mm, With lifting and lowering device, incl. automatic ride height reset, Load-dependent, fully automatic electronic lift axle control for 1st axle, Load-dependent, fully automatic electronic lift axle control for 3rd axle, Manual function at control console for forced lifting (= starting aid acc. to Directive 97/27/EC) and forced lowering via rotary switch, Note: Reduced ground clearance in lift axle area!, Lift axle switching sequence: 3rd axle lifts first / lowers last, Plastic mudguards, Spray suppression according to EC directive, Brake system according to ECE Regulation 13 (incl. vehicle stability control), Spring-loaded parking brake, Brake line connections at front approx. 675 mm above platform, Diagnostics via ISO7638 connector (EBS supply cable), Standard air connections ISO 1728 (Palm couplings), Brake system make: Wabco, EBS system 2S/2M, 2 sensors on one axle, Lighting and signaling system ECE 48, 2 LED license plate lights, 2 outline marker lights with rubber arm, LED version, LED side marker lights with indicator function (flashing), Electrical cable connections at front approx. 450 mm above platform, 24 Volt, with 7-pin socket DIN ISO 1185 at front, 7-pin socket DIN ISO 3731 at front for additional functions, Additionally 15-pin socket DIN ISO 12098 at front, Multifunction rear lights, Steel ram corners at rear.

Condition: used, maximum load weight: 29,804 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 11/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,999 mm, total width: 2,550 mm, Equipment: ABS, Krone SD Curtain Mega Edscha Lifting Roof 2x Lift Axles (1st Axle + 3rd Axle) Multilock Outer Frame Permissible gross weight: 36,000 kg, Unladen weight: 6,196 kg, Nedpfx Ajxtrttjfhjwb Payload: 29,804 kg, Coupling height unladen: approx. 985 mm, BPW axles, Lift axle: 1st axle + 3rd axle, Air suspension, Disc brakes, Edscha sliding roof, Hydraulic lifting roof with 500 mm total lift, can be raised separately at 4 corner posts, White strap tarpaulin sliding curtain, Sliding curtain right and left, Rear portal doors, Side underrun protection right, left, and rear, 2x landing gear, Rear access ladder on the right, Toolbox left, Toolbox right, Forklift accessible, Metal bumpers, Multilock outer frame, ABS, EBS, ALB, DIN EN 12642 Code XL, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, Loading area (LxWxH): 13,620 x 2,480 x 2,999 mm, External dimensions (LxWxH): 13,950 x 2,550 x 4,000 mm, Clear loading height rear portal: 2,795 mm, Clear loading width rear: 2,480 mm (internal), Tyres: 435/50R19.5 on ALCOA alloy rims, Tyre tread depth left front: 6 mm, Tyre tread depth left middle: 10 mm, Tyre tread depth left rear: 10 mm, Tyre tread depth right front: 5 mm, Tyre tread depth right middle: 9 mm, Tyre tread depth right rear: 4 mm, Additional features: Type: SD, Suitable for tractor unit (ISO 1726 limited – engine vehicle data required!), King pin to center of support approx. 2,720 mm, Coupling height unladen: approx. 985 mm, Double-T longitudinal and center beams and outer frame welded with cross members and outriggers, Multilock outer frame, universal load securing option every 100 mm, Front build height: 80 mm (incl. floor and fifth wheel plate), 2" king pin, Rear underrun protection to EC Directive, Lateral protection devices to EC Directive, Rear sliding rescue ladder, Door retainer, Two mechanical support legs, 2 x 12 t, semi-circular with base plate, Operation of supports from one side, FR-right, 3 axles each with 9,000 kg load capacity, BPW axles, 19.5", with air suspension (total lift 260 mm) and disc brake (ET 120), Brake disc diameter 370 mm, With lifting and lowering device, incl. automatic ride height reset, Load-dependent fully automatic electronic lift axle control for 1st axle, Load-dependent fully automatic electronic lift axle control for 3rd axle, Manual function at control console for forced lifting (=starting aid per Directive 97/27/EC) and forced lowering via rotary switch, Note: reduced ground clearance in the area of the lift axle!, Lift axle lifting/lowering sequence: 3rd axle lifts first / lowers last, Plastic wheel covers (mudguards), Spray protection to EC Directive, Brake system according to ECE Regulation 13 (incl. vehicle stability function), Spring-loaded parking brake, Brake line connections at front approx. 675 mm above platform, Diagnostics via ISO7638 connector (EBS supply cable), Standard air connections ISO 1728 (Palm), Brake system brand: Wabco, EBS system, 2S/2M, 2 sensors on one axle, Lighting and signaling in accordance with ECE 48, 2 LED license plate lamps, 2 contour lights with rubber arm, LED version, LED side marker lamps with direction indicator (flashing function), Electrical cable connections at front approx. 450 mm above platform, 24 Volt, front with 7-pin socket DIN ISO 1185, 7-pin socket DIN ISO 3731 at front for additional functions, Additional 15-pin socket DIN ISO 12098 at front, Multifunction tail lights, Steel corner bumpers rear