Tipper truck

SCANIA R 580 6x4, Meiller, Bordmatik, Klima, Hydr. AHK

Condition: used, mileage: 392,370 km, power: 427 kW (580.56 HP), first registration: 03/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, color: grey, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space volume: 12 m³, loading space length: 4,900 mm, loading space width: 2,390 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, navigation system, parking heater, Meiller 3-way tipper body, Bordmatic sidewall system, hydraulic connection for trailer, Duo-Matic brake connection, stainless steel toolbox, emergency brake assist, lane departure warning system, adaptive cruise control, traction control, hill start assist, ABS, differential locks, engine brake, air conditioning, auxiliary heating, navigation system, heated and electrically adjustable exterior mirrors, electric window lifters for driver and passenger door, electric sliding/lifting glass roof, cool box, multifunction steering wheel, cruise control, driver’s comfort suspension seat, leather seats, 1x sleeper berth, fog lights, rotating beacon, air horns on cab roof, leaf suspension. The vehicle may be fitted with decals and/or advertising lettering. SI86563 Bsdpfxox Tx Aks Acvjdb Our offer is generally without new roadworthiness (TÜV) certification. If a new roadworthiness certification is required, we will be happy to provide you with an offer from our partner workshops! The vehicle may be fitted with decals and/or advertising lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: used, empty load weight: 4,020 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2017, loading space length: 4,500 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 11 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Colour RAL 6002 pale green Drum brake EBS Payload 14,980 kg Air-lift suspension Floor 4 mm - wall 4 mm BPW axles Fixed underrun protection 5 pairs of lashing rings Side aluminium drop sides, swinging and foldable with lift springs Bjdpfxsxdk Ans Acvsdb Electric Schwarzmüller sliding roof Errors excepted

Condition: new, empty load weight: 4,100 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,880 mm, loading space width: 2,420 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Frame Central-axle welded steel frame construction in weight-optimized lightweight design with tipping booms and rear tipping shaft; Plug lock for tipper body with crossover locking device Towing device Cranked drawbar with height-adjustable heavy-duty screw towing eye 50 mm (- approx. 110 mm) Support device 1 mechanical support winch with crank on the left in the direction of travel, 1 bolted-on step bar SAF intradrum axles with drum brakes, S-cam brake 420/180 mm, load capacity 9 t/axle, reinforced axle beams, off-road version, automatic brake slack adjuster Without axle lift Braking system/Suspension Braking system according to ECE Directive R13 Dual-line compressed air braking system Knorr braking system EBS system 2S2M, 2nd axle with sensor RSS/RSP - Stability Program Spring-loaded parking brake on 2nd axle Aluminum air reservoir Brake/air connection lines with 2 individual yellow/red coupling heads EBS/ABS connection cable Hose lines routed under the drawbar Electronic air suspension with automatic lowering device via inductive switch and additional lowering lock via rotary switch on the trailer Without lifting and lowering device Assistance/safety systems SWIT - Schwarzmüller Intelligent Telematics, "LOCAL TRAC" service package Tipper body Steel welded construction Fixed 4 mm sheet steel front wall, approx. 980 mm high 2 access bars inside and 1 outside on the front wall Fine-grain special steel floor plate, 5 mm (Slight floor undulation possible due to welding distortion) 5 pairs of 5 t swivel lashing rings (width between lashing rings approx. 2,320 mm) 1-piece reinforced 60/40 mm aluminum hollow profile side walls, approx. 980 mm high, foldable with extended swivel bolt locks and spring-loaded lifting aid, also swingable Left and right side walls with manual central locking Two rear corner pillars at side height, permanently attached to the sides 4 mm sheet steel rear wall (HB400), approx. 980 mm high, swingable with recessed bearings, hooks for dosing chains on the rear wall and underside of the bridge Rear wall locking = automatic pneumatic closure With sealing strips Hydraulics Single-pipe system with hydraulic connecting hose including SVK DN13 plug-in coupling Tipper press for 3-way tipping, initial lifting force approx. 30 t; 1 safety rope Tarpaulin Plastic roll-up tarpaulin including aluminum tube and hand crank, side overhang approx. 400 mm, without customs seal, horizontal tarpaulin bracket rope lacing on the right side in the direction of travel, zigzag lacing at the front and rear; Stop bracket and locking device for rolled-up tarpaulin on the right side in the direction of travel; Bracket for hand crank Tarpaint attachment on the left in the direction of travel with two tensioning straps including rubber pads and turnbuckles on the underside of the bridge Tarpaint color similar to RAL 9006 White Aluminum Paint finish Steel granulate cleaning, multi-layer epoxy zinc phosphate primer, and spray painting with a two-component polyurethane topcoat Chassis = RAL 7021 Black Gray Tipper body including front wall = RAL 7021 Black Gray Side walls = RAL 7001 Silver Gray Rear corner pillars = RAL 7021 Black Gray Rear wall = RAL 7021 Black Gray Wheel hubs black = powder-coated Support feet black = powder-coated Side impact protection = factory selection Plastic parts black, unpainted Powder-coated attachments/built-in components black Hot-dip galvanized attachments/built-in components unpainted Errors excepted Bdodpswc Tbmefx Acvob

Condition: used, machine/vehicle number: GE11/142/2022, empty load weight: 6,350 kg, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 08/2008, loading space length: 8,500 mm, loading space width: 2,500 mm, suspension: air, Very well-maintained vehicle from first owner Three-axle low-loader trailer Low-loader with drive-up ramp Heavy-duty transport Model T3 Komakt 30.0 Bdedpfx Acen Aw Hksvsb Length 8,500 mm Width 2,500 mm Air suspension Commercial/export net price – €15,990 Subject to changes, interim sale, and errors ===== Phone2 Mobile =====

Condition: new, maximum load weight: 16,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lifting and lowering function * SmartBoard as infotool on the trailer, with pressure sensors for indicating total axle load per axle group * Side underrun protection * Mechanically adjustable warning sign sets at front and rear * Front axle closed plastic mudguards; rear axle straight galvanized steel skirts, both with splash guards * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made of galvanized steel sheet, approx. 650 x 300 x 600 mm (black powder-coated), mounted on right side * 15-pin electrical connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Side marker lights with indicator control * Drawbar with 40 mm towing eye and height adjustment via draw spring and turnbuckle * Tire pressure monitoring system with display option inside truck via EBS signal (without installation on the truck side) * Rubber covering on the folding ramps and loading slope left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from front end to rear end * Hardwood flooring on running surfaces of the low-bed platform * 4 stake pockets per side, each with 2 t lashing capacity * Load securing package consisting of: 5 pairs of UVV lashing rings, swingable and lowerable, loadable in all directions and embedded in the outer frame – 13.4 t capacity in the corners, otherwise 10 t * 6 pairs mechanical fold-out outriggers for 3 m total width (excluding the rear slope) * Plank holder under the loading area, longitudinally mounted * Roller stops raised in front of the front wall, with 1 x 6.4 t lashing eye each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves * Hydraulic lateral ramp adjustment * Rear hydraulic support (single-stage cylinder) * Hydraulic flow divider in trailer (for hydraulic pump capacity in truck from over 40 l/min up to max. 140 l/min) * Splash-proof hydraulic control block * Two-line hydraulic system * Loading area over turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm loading slope) * Loaded platform height approx. 890 mm +/- 20 mm air suspension * Chassis, turntable, roller stops, fold-out extensions & ramps hot-dip galvanized * Axles, turntable, drawbar, air tanks etc. painted in black Bodpfxjtplv No Acvodb * Loaded platform height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 20/2026