Tipper

Stas 50

Condition: used, maximum load weight: 26,330 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/2011, next inspection (TÜV): 02/2026, loading space volume: 50 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2011, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- Chassis * Steel tipper body * MB axles * Air suspension * Disc brakes * Tyres: 385/65 R22.5 * ABS * EBS * Foldable rear underrun guard ----Superstructure * Steel tipping platform * Tipping hydraulics * Dimensions approx. 8,550mm x 2,350mm x 2,300mm * Capacity: 50m³ * Portal doors * Platform ----Technical Data * Gross vehicle weight: 34,000kg * Unladen weight: 7,670kg * Payload: 26,330kg ----#German vehicle *ALCOA# Financing/leasing/hire purchase available on request. Rodpfx Asx Iy I Dohzjl ----Advertising / company logos on the vehicles may have been digitally removed in the pictures. ----Contact person by phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit; to ensure the best possible experience, we kindly request you to arrange an appointment. ----Errors, mistakes, and prior sale excepted. All information provided without guarantee, especially regarding equipment and accessories.

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2025, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Rjdevuhcqjpfx Ahzsl Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 29,020 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2005, loading space length: 10,560 mm, loading space width: 2,470 mm, loading space height: 1,900 mm, Equipment: ABS, Lifting axle, 50 m³ For more information please call: , ????? ?? ????? ???? ????? ???: 420734511212 Rjdpfx Ajx Ia Rxshzel

Condition: excellent (used), axle configuration: 3 axles, first registration: 01/2007, loading space volume: 50 m³, total length: 10,710 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,110 mm, color: green, Year of construction: 2007, Equipment: ABS, = Additional Options and Accessories = - Alloy wheels - Aluminium floor - EBS - Rear doors - Grain chute - Light alloy wheels - Steering axle - Air suspension - Sliding tarp cover - SAF axles - Disc brakes = Remarks = Stas S300CX Year of manufacture: 2007 50m3 BPW axles, disc brakes Tailgate/door combination Aluminium rims (Alcoa's) Tarpaulin cover ABS/EBS NL Trailer Redpfx Ahjx E N Nrozol = Further Information = Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: LM rims; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: LM rims; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 3: LM rims; Max. axle load: 9,000 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30% Weights Unladen weight: 6,580 kg Payload: 36,420 kg Gross vehicle weight: 43,000 kg Condition Technical condition: very good Visual condition: very good Damages: none Identification Registration number: OJ-28-PL Further information Contact John Hesselink or Christel Hesselink for more information. = Company Information = Looking to finance this vehicle? No problem. We can quickly arrange an affordable finance lease for you with a term of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly.

Condition: used, maximum load weight: 29,920 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2008, next inspection (TÜV): 01/2026, loading space length: 10,480 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Aluminum box-shaped trough approx. 50 cbm, aluminum chassis, fifth wheel height loaded 1225 mm, combination door at the rear, double-wing door with rotary bar lock/pendulum flap, pneumatic rear wall lock, 1 x grain slider with cover, grain funnel, "EDBRO" tipping ram, roll tarpaulin, aluminum drop supports, ABS, EBS, MERCEDES-BENZ axle(s), disc brake system, ALCOA aluminum rims, air suspension with lifting/lowering device, lift axle, 1x storage box, vehicle can be labeled and/or decorated with advertising. Rjdpfx Ahextc I Iszel Our offer is generally without a new TÜV approval. If a new TÜV approval is desired, we will be happy to provide you with an offer from our partner workshops! Vehicle can be labeled and/or decorated with advertising. Our general terms and conditions of delivery and payment apply. We are happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, axle configuration: 3 axles, first registration: 02/2021, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,675 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength, unit chassis made of aluminum, 140 mm frame height! (max. 39 tons) Axles and suspension: 22.5-ton disc brakes Jost axle assemblies, 3 x 9-ton with DC air suspension, ken, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with traction control (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice on Alcoa aluminum rims, satin, 11.75x22.5 ET120 Seatposts Aluminum drop-lift supports, Alu Leg, with 2x10-ton drawbar load; we use swivel feet for the air suspension Braking system according to E.G. Standard, dual-line braking system, Wabco EBS system with RSS (Roll Stability Support) system, spring-loaded braking system acting on two axles with rear controls, aluminum air chamber system, premium modulator Electrical system Compliant with the German Road Traffic Licensing Regulations (STVZO) guidelines with two Aspöck Europoint III LED five-chamber lights integrated into the aluminum rear end, 24-volt system with one 15-pin and two 7-pin sockets, with LED side marker lights, two separate LED work lights at the rear, and two LED work lights on the sides. At the height of the seat posts, 1 LED work light inside, front left, can be operated from the outside. Body/Trough "Fully welded body" Front wall load 17,250 kgf/cm², rear and side walls 10,250/13,400 kgf/cm², aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper chords, plank profiles fully welded inside, floor as a moving floor system on 140 mm aluminum cross members, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profiles, 2-3 mm thick, straight design, special aluminum corner profiles, smooth rear wall, straight design, with two aluminum wing doors, 50/30 mm thick, with 4 espagnolette locks in the welded-in design. Aluminum rear frame mounted on Teflon bearings and stainless steel bearings, a sliding aluminum wall suspended from the reinforced aluminum top chord with a Kevlar tarpaulin for complete emptying, side brush seals and an additional Kevlar tarpaulin, an integrated grain hopper with a cover plate, operable from the outside with a viewing window at the rear left, and two test slides in the rear doors. "Cargo Floor" 24-Board Hydraulic System Moving floor system in the floor with hydraulically operated aluminum profiles mounted on square aluminum profiles with approximately 880 PE-HD sliders, approximately 6 mm smooth floor, hydraulics with approximately 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves of a size and design to be specified, operating pressure 190 - max. 240 bar, aluminum End pieces welded into the floor, rear left control with remote control in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber mud flaps, aluminum spare tire holder, folding aluminum side bumpers, 1 plastic toolbox approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, 680 g/m² roll-up tarpaulin with a roll-up tarpaulin system including a Redpfx Ahoxuy I Iszjl

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "EXTREME" First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered body design in width) Unladen weight: 8,293 kg Rsdpfjxriu Ejx Ahzjl Z-chassis, cranked design Floor made entirely of 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire floor, fully welded Front and side walls made of 5 mm Hardox steel HB450 Slanted front wall, interior with access ladder Deflector plates along the entire length of the sidewalls (for mudguard protection) Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder type Alpha, suitable for high and low pressure ALU landing legs, full load capacity 2x air vibrators mounted under the body SAF axles with large 430 mm disc brakes 1st axle: lift axle with traction aid WABCO trailer EBS with rollover stability control (RSS) WABCO Smartboard Automatic tipping lowering feature Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Holder for shovel and broom Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING – immediately available from us as a FULL-SERVICE RENTAL as well.

Condition: excellent (used), axle configuration: 3 axles, first registration: 05/2012, loading space volume: 50 m³, total length: 11,490 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,710 mm, color: green, Year of construction: 2012, Equipment: ABS, = Additional options and equipment = - Alcoa Dura-Bright wheels - Alloy rims - EBS (Electronic Braking System) - Rear doors - Lifting axle - LED lights - LED work lights - Light alloy wheels - Air suspension - Sliding tarpaulin cover - SAF axles - Disc brakes = Notes = Stas S300CX Year of manufacture: 2012 50 m³ BPW axles, disc brakes Tailgate/doors combination Rjdpjufqdmefx Ahzel Aluminum rims Cover tarpaulin ABS/EBS MOT (APK) valid until 05/2025 = Further information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 50% Rear axle 3: Alloy rims; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 50% Weights Unladen weight: 6,570 kg Payload: 32,430 kg Gross vehicle weight: 39,000 kg Functionality Tipper: Rear Condition Technical condition: Very good Visual condition: Very good Identification Registration number: OL-56-RN = Company information = Interested in financing this vehicle? No problem. We can quickly arrange an affordable finance lease agreement for you with terms of 12, 24, 36, 48, or 60 months. All photos and further information can be found at or contact us directly.

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Rsdpfx Aoxf Spfjhzjl Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Rjdpjxf Sn Iofx Ahzol Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.