Crane truck

Liebherr LTM 1030-2.1 – all-terrain crane

Condition: defective spare-parts repository (used), Accident crane Liebherr LTM 1100-4.2 Dusdpfxev Ean He Ab Ajp Manufacturer: Liebherr Type: LTM 1100-4.2 Year: 2017 All equipment without damage Counterweights Hydraulic double jib boom Boom Soldout: Winch 1 Winch 2 Runner 2.5 ton counterweight instead of the second winch Upper cabin was never usable

Condition: reconditioned (used), functionality: fully functional, power: 106 kW (144.12 HP), overall weight: 14,500 kg, Year of construction: 2008, operating hours: 18,704 h, Equipment: UVV, Mining authority approval and valid UVV inspection. End of 2022: complete technical overhaul of the drill head including gearbox, guides, bearings, etc. Drill rods included in the price. Duodsxlcl Ropfx Ab Aep

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling Dodpfsh Hm Thox Ab Asup -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: used, Year of construction: 2002, Equipment: crane, LIEBHERR 56K Built in 2002 High 32.7 m Unloading 40 m Dodpfx Abokq H Dgo Aeup Trailing load 4.5 t TOP CONDITION

Condition: used, mileage: 53,857 km, power: 270 kW (367.10 HP), first registration: 06/2003, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro3, total width: 2,680 mm, total height: 3,750 mm, Equipment: parking heater, Liebherr UTM 735 - Crane: LTM 1055/1 - Year of manufacture: 2003 - 22,439 operating hours (carrier chassis) - 18,883 operating hours (crane superstructure) - 53,857 km mileage - 4 x hydraulic boom extension - 16 m jib - Hydraulic steering - 12 t additional counterweights - LED beacon lights - Technical inspection due: - Safety inspection due: 01.2026 - Tyres: 445/95 R 25 Duodpsw H Hwvjfx Ab Aop Subject to errors and prior sale. Internal vehicle number: 11218 WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp.

Condition: used, mileage: 98,831 km, lifting height: 66,000 mm, Year of construction: 2016, operating hours: 1 h, Drive: Wheel Unladen weight: 51,600 kg Dodpfxeut Dyxs Ab Ajup Lifting capacity: 70,000 kg Serial number: 060 587 Front tire condition: 80% Rear tire condition: 80% Transport dimensions (L x W x H): 12.5 x 2.55 x 3.9 m Please contact PFEIFER GROUP for further information.

Condition: good (used), mileage: 28,585 km, Year of construction: 2017, operating hours: 7,695 h, Manufacturer: Liebherr Dusdpfx Abox A T Aho Ajp Model: LTM 1030-2.1 Year: 2017 Capacity (t): 30 t Main boom: 30 m Jib: 15 m Mileage: 28,585 km Crane hours: 7,695 h Undercarriage hours: 1,167 h

Condition: used, Year of construction: 1987, Liebherr 35 K stationary crane With transport axles in very good condition Dedpepbvn Nofx Ab Aeup

Condition: used, mileage: 129,252 km, lifting height: 38,000 mm, Year of construction: 2015, Application: Construction Drive: Wheel Unladen weight: 27,875 kg Lifting capacity: 23,800 kg Serial number: 122024 Front tyre condition: 70% Rear tyre condition: 70% Dodjw A Hb Tspfx Ab Ajup Transport dimensions (L x W x H): 11.1 x 2.55 x 3.9 m Contact PFEIFER GROUP for further information.

Condition: used, mileage: 53,318 km, lifting height: 110,000 mm, Year of construction: 2018, Drive: Wheel Unladen weight: 60,000 kg Lifting capacity: 250,000 kg Dusdpfx Ajwz Utzeb Aep Serial number: 088666 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.86 x 2.99 x 3.99 m Contact PFEIFER GROUP for further information.